Hub3 and Inf.2 - I had to use workaround to connec...
Engineer installed Infinity 2 and was up and running no problem with wired connection. Super fast :-)
When we tried to connect a wireless device it would not connect and engineer advised disconnecting all the wired connections (I have 4 RJ45 connections to TV, playstations etc). Disconnected wired connections and wireless connections could be made no problem. This seems an issue to me and not right but it worked and I was happy as only need to do this once and get all my wireless devices connected! Then reconnected wired devices and all worked well. BUT. Took wireless device out of range - went to the shops with my iPad - when I returned it did not connect and will not connect. Same for iMac and Blackberry phone. If I have to unplug wired devices every time to reconnect this is a big problem. Has anyone else had this problem and got a solution? Thanks.
sounds like a faulty hub3 to me. Mine never had these problems and my laptop, printer and phone connected wirelessly fine with everything else connected via ethernet.
I have switched to a Cisco linksys e2500 as I find the homehub 3 very unreliable in general using wireless.
Similar Messages
-
Me and my daughter had been using the same apple id, she was triyng to change it, now all of my iphone contact are gone, what can i do ti get it back , this is very important to me.
Your contacts are helpd on the server, so if you sign out from your iCloud account and sign into another one they will disappear. If you sign back into the original account they will reappear.
-
I had beeen using Puffin browser for running flash player on my iPad2. Now the Puffin browser is not getting connected and I get a message saying that " A Firewall is installed between your device and internet". Can somebody suggest how to resolve this???
Hi Sailor,
It is pretty amazing you got a new version without even knowing it.
In System Preferences > App Store you can turn off the automatic updates by unchecking "Install app updates" as I've done here:
If you're using Numbers across platforms and displaying dynamic output on the iPad or doing data entry there, you'll be *much* happier with Numbers 3.0 than the old version. If you're doing a lot of traditional printing of heavily formatted documents, the old version is much better. For most day-to-day uses in between it's a toss-up. The new version, despite its flaws, is a powerful application that can enhance productivity in ways the old version can't.
For more on the differences between the two, see the features gained, features lost, and workarounds threads, plus Apple's support document on features to be reintroduced in the coming months .
SG -
good night recently my iphone 4s was exchanged for a new one because was defective and was in warranty. the problem is that now I try to use the same apple id on itunes and applications while had bought the old iphone does not appear and I think should appear. Can someone help?
?
-
2 iphone 4, 1 computer. i upgraded to ios 5 and just updated my wifes phone as well. her phone got wiped of all apps and all my contacts were put on her phone. we had been using the same apple id but different user acct on our laptop. How do i get her phone back to normal??
Have your wife log in to her user account on the laptop. Launch iTunes, then connect her phone to the computer with the USB cable. Sync. That should put back all apps and media. Since you already upgraded her to iOS 5 she'll have to manually enter all her settings and preferences, and organize her home screens.
-
Images I move from one folder into another are disappearing, at first it was occurring immediately and only if I did not copy and paste the images. Today however I found out that images I had been using for days just up and vanished from their new location. A few of these images had copies in another folder that remained and the ones I couldn't find may or may not have ever had copies. I had backed up my system with time machine recently as well, so I went into the backup to retreive the lost images. When I searched and found the backup copies I got the error "the file alias cannot be opened because the original cannot be located". The crazy thing is that the images that remained on my computer did not give me the same error and opened like they should.
In short images that I am creating, saving, and using are disapearing so epically that even time machine versions are affected when retrieval is attempted. Any suggestions as to what I could be doing wrong without realizing it? Or perhaps other people have had similar bugs that are software related and have a solution?Hi Kevin,
I understand what you tried to do but it doesn't work that way. Swapping drive names will just mess things up.
You should be able to reconnect the files though: in the Locate Referenced Files dialog make sure you click the Show Reconnect Options button — this will give you access to all the connected drives. Locate one of the files and hit Reconnect All. Should do the trick.
Best -
i bought this apple ipad from pawn shop and have receipt. its locked by previous owner and pawn shop had no info on previous owner to contact. how can I delete all content and start fresh so my grandson can use for college?
If it's activation locked, you can't; go back to the shop and ask for a refund.
(120778) -
Can you help me on something? I restored my iPod and everything I had was gone. (What I Wanted) But then when I looked at my Usage It said I only have 22.5 GB Available and I Used 6.0 But I didn't. I also looked at my Backup storage and it still had all of my backup from before I restored. I deleted all my backup because it said I used all of my Backup Available. And now when I try and backup it says there is no more room or whatever to backup and Its 5/5.
You are not addressing Apple here. We are all just users like yourself
lost/stolen
No app on the iOS device is required.
- If you previously turned on FIndMyiPod/iPhone/iPad on the iOS device in Settings>iCloud and wifi is on and connected or cellular data is on and connected for, on a computer browser go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up or continue to show off-line.
- You can also wipe/erase the iOS device and have the device play a sound via iCloud.
iCloud: Erase your device
iCloud: Use Lost Mode
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the device and report to police and carrier if iPhone or cellular iPad
- There is no way to prevent someone from restoring the erase (it erases it) using it unless you had iOS 7 or later on the device. With iOS 7 or later, one has to enter the Apple ID and password to restore the device.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number -
I have gotten a giftcard for iTunes and I want to spend it but before I had a credit card giftcard and I spent it all and now I don't have a credit card and I just want to use thee iTunes one how do I delete the card on my iPhone
Hello Clancbelle,
It sounds like you have a credit card saved to your Apple ID payment information and you would like it to be removed from the account and set the payment method to None. You should be able to do this with the following article:
iTunes Store: Changing your payment information
http://support.apple.com/kb/ht1918
Changing your payment information using an iOS device
Tap Settings on the Home screen.
Tap iTunes & App Stores.
Tap your Apple ID. (If you aren't signed in, enter your Apple ID and password and tap Sign In.)
Tap View Apple ID.
Enter your Apple ID password.
In the Edit section, tap Payment Information.
Update the information that you want to change.
Tap the Done button when you're finished.
Thank you for using Apple Support Communities.
Cheers,
Sterling -
I recently moved and had to disconnect my WD My Pro Edition II 2TB external drive I had been using for backup.
Its been several months (many upgrades to the iMac software during this time), and now when I try to reconnect the external dire (Use a firewire cable) it does not recognize the drive is there. I also tried "reloading" software from the Western Digital site, but after following all the instructions, it looks like my iMac doesn't support this software (I can't even locate it after I follow all the instructions.
Thnaks, for anyones ideas on how I can get this working again.....First of all, you do not really want to use their software; if you want a bootable clone, use either Carbon Copy Cloner or SuperDuper. If you simply want to drag and drop some files, you don't need software to do that. The important thing on any external drive is that you format/partition it correctly (Mac OS Extended (Journaled) and using GUID partition scheme).
Unfortunately, I don't know anything about WD drives or their software, so I don't have any idea what kind of backup you did. Having said that, it should still recognize the external even if it's outdated. Have you tried mounting it manually in Disk Utility? If you can get it to mount, you could (worst case scenario) just drag your stuff off onto your internal and then reformat the external. -
Hello there!
I am a new Mc Bok Pro user and had been using my mac since Sept, 2012 with no problem. Just recently however, I have been experiencing a Keychain access problem. Specifically, whenever I open the mac, it asks for my keychain password... Can I restore my mac to its condition before Jan. 18, 2014? What should I do?
Thanks everyone!
GeorgemThis is only for Local Items key chain not Login Keychain.
“Local Items” keychain prompt?
Try this.
https://support.apple.com/kb/TS5362 -
I have just bought an iMac, and when I had my PC I had all my mp3 music on external hard drive and used to stream using software called ps3 server and tveristy which used to pick up on my Roberts radio via network wi fii and on my iPad via AirPlay. How can I do the same with iMac as this software isn't compatible
To install apps from developers Apple doesn't recognize go to Security and Privacy in the System Preferences and change Allow apps downloaded from anywhere
-
I had my iphone set up to be tracked as registered with iCloud and it had been using it for a year today it said no devices registered and stopped working even though i tracked the selected iphone 4 device an hour earlier why did it do this???
So basically the phone I was tracking was working an hour earlier it had no signal at times when it did pick up a signal it located it easily but an hour later the message came up no devices registered when my friend returned home I Checked the device I was tracking to make sure find my iphone was on but it was off and my friend didnt turn it off so my question is why did it turn itself off???
Confused? -
Hi, I have had an LG Octane for 4 years and loved it. I used it for email, surfing the web and facebook. But 6 weeks ago I stopped getting text messages, I could send but not receive. I was told it was just worn out. So I ordered another Octane from ebay, and it wouldn't connect to the internet. I was told by Verizon that the software had been changed. So I ordered a NEW in Box Octane and I am having trouble with that too. Bing won't work, nothing will work that will enable me to download Verizon Opera mini that still works on my old phone. I have a smart phone with another number but I LOVE the Octane for daily use. Why will my old Octane work but I can't get a NEW one to. Verizon guys are stumped too:( Please help!! Thanks!
Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
I suggest that no response is made to this duplicate thread. -
On 03/13/2011, I could not use an interactive photo gallery in the New York Times website. I had a slide on each picture which showed the before and after the tsunami damage, in Japan.
I had to use Google Chrome, though Firefox is my default browser.
I had the same problem with the photo gallery of dresses during and after the Oscar event.That site relies upon JavaScript to use the before and after feature. Make sure JavaScript is enabled, to do that open the Options window, go to the Content panel and make sure "Enable JavaScript" is selected.
If you have an add-on such as NoScript that blocks JavaScript, you need to set it to allow scripts to run on that site.
Maybe you are looking for
-
X58 Eclipse Sli with CMP12GX3M3A1600C9 how to make it run stable in 1600Hz?
Hello , I m new here, so forgive me if i make a mistake somewhere ! So my specs are : motherboard: X58 Eclipse Sli(bios ver:1.F0 model:MS-7520) CPU:i7 950 @ 3,07 (stock) GPU: 2x GTX470(msi) PSU:Thermaltake 1200watt HD:1xSSD , 1xWD@10000rpm and here i
-
How j2me relates to WAP gateway?
Hello to everyone, I want to know that, Without using a wap gateway how j2me works? According to me, Gateway is used to connect two different networks Lets say I am calling a jsp page from MIDlet. mobile devices belong to wireless network(j2me), jsp(
-
Can't find Motion 5 in purchases after moving to new Mac Pro!
Just upgraded from MBP RD to the new MacPro. All souped up. I transfered all my MBP stuff from my time capsule Time Machine back ups directly into the new MC Pro. It worked out but to my surprise, many of the applications didn't make it. Ok. that's f
-
Zoom for Closeup in Moving Image?
Okay, what I am asking is probably impossible, at least in iMovie 3.0.3 which I am currently using, but I'd like to ask anyway and learn "how" impossible. Say I have a moving (video) image (in iMovie) showing several people, and I want to have just o
-
Hello, everyone. For some reason, my DW has "Split Vertically" default selected every time DW loads. When I want to split view, it's always initially vertically split. This is annoying me. I would like for the split to be horizontal, always, and if