Hub3 Portforward

I have the Hub3 with 11.5MB download speed and 1.2MB upload speed, my son complains about lagging on games like Call Of Duty and Fifa on the Xbox, will portforward help abit?

Which version of the home hub 3 do you have, A or B? (look underneath)
Does he connect using a wireless connection, as that will introduce quite a bit of delay.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Similar Messages

How do I portforward an Airport Extreme on a Windows 7 PC?

I know this has been asked before but ever solution I have tried has failed. Basically I have a windows 7 PC and want to portforward to host games such as minecraft and terraria. The only problem is that I am connected via ethernet to my modem and cannot connect through wifi to the router. I have tried conencting my PC to the LAN ports on the airport, but Airport Utility still cannot detect it.
I have looked at portforwarding on my Mac so it hosts but when I am mapping a port, the private ip is 192.168.1.x while my PC is 192.168.0.x and Airport Utility will not let me delete the one and change it to a zero.
I am at a loss for what to do. Should I sell my airport and get a new router that will simplify portforwarding via ethernet?
Any help is greatly appreciated.

If you already have the router feature disabled on the Cisco, it would be in bridge mode. In this case you can still configure port forwarding/mapping on the AEBS.
Please see the following AirPort User Tip for details on using the AirPort Utility to configure an AirPort for port mapping. Note: Although the instructions are OS X-centric, version 5.x for Windows is nearly identical and the setup would be similar.

Hub3 and Inf.2 - I had to use workaround to connec...

Engineer installed Infinity 2 and was up and running no problem with wired connection. Super fast :-)
When we tried to connect a wireless device it would not connect and engineer advised disconnecting all the wired connections (I have 4 RJ45 connections to TV, playstations etc). Disconnected wired connections and wireless connections could be made no problem. This seems an issue to me and not right but it worked and I was happy as only need to do this once and get all my wireless devices connected! Then reconnected wired devices and all worked well. BUT. Took wireless device out of range - went to the shops with my iPad - when I returned it did not connect and will not connect. Same for iMac and Blackberry phone. If I have to unplug wired devices every time to reconnect this is a big problem. Has anyone else had this problem and got a solution? Thanks.

sounds like a faulty hub3 to me. Mine never had these problems and my laptop, printer and phone connected wirelessly fine with everything else connected via ethernet.
I have switched to a Cisco linksys e2500 as I find the homehub 3 very unreliable in general using wireless.

I am unable to get my BT Home Hub3 to turn-on the ...

Hello,
I am aware that this is a user to user forum.
I after many calls from BT sales team succumbed to their request to move my phone calls & broadband with BT.
I have been with Pipex using their speedtouch router [provided by the Pipex]. It is connected through Ethernet to my desktop computer that has Win Ultimate x64 OS for the last 4 years without any problem.
I passed on the MAC Code to BT 2weeks ago for this trouble free transition in anticipation. BT issued me with an order number for the transition and a letter arrived few days later from BT informing my activation date for the Broadband - BT Total Broadband Option 1 as on the 22 Mar 2011.
My BT Home Hub3 arrived yesterday - 22 Mar 2011.
I attempted to connect my Home Hub3 last night and again this morning with no avail.
On each attemt to connect the "power" "wireless" light turn blue but the "broadband light flash orange and then purple and orange for few minutes and finally red.
I tried to troubleshoot through the Hub Manager but the "broadband"light firmly remain red. [This indicates Broadband is active but not through BT I presume]
When I disconnect the BT Home Hub and connect Pipex issued speedtouch router the broadband becomes accessible and I am able to post this message to this form for help.
I phoned BT to India after 25 minutes listening music, the polite lady has cut my line off without any resolution.
Can any-one help me?
Regards
Solved!
Go to Solution.

Wow, you couldn't make it up!
Now that it appears that you've now got to wait till the 30th, you could ask the forum mods to double check this for you. Whether they can wave their magic wand or use some fairy dust to speed it up is doubtful, but ya never know....
You'll need to contact them via this form - http://bt.custhelp.com/app/contact_email/c/4951
Allow upto 72 hours for a reply (at least it should be before you go live...)
-+-No longer a forum member-+-

Portforwarding 3389 requests for more than one pc

I have 2 computers that I want to acces through internet using Remote desktop.
On my WRT54G I have forwarded port 3389 to internal ip 10.0.0.100.
for the second pc I thought of using port 3390 external to ip 10.0.0.99 3389 internal.
I have done so on other routers before, by using portforwarding 3390 to ip 10.0.0.99 port 3389 but how do I set this on this router?
Could someone help me out?

In the Port range forward I have set external request for Remote destop being port 3389 to be forwarded to my desktop pc #1 with static IP 10.0.0.100.
Now I have a second desktop with static IP 10.0.0.99 that I also want to use externally. But all 3389 requests are set to go to pc #1.
How do you arrange that I can use pc#2 externally? In other routers I saw, there was the option to set for example external request for port 3390 to internal 10.0.0.99 port 3389.
So when I want to use my pc#1 through internet I use remote desktop to my home ipadres. When I want to use my home pc#2 I enter my home ipadres 122.123.123.123:3390 (ipadress is fake
Do you understand my problem? In the port triggering settings I can't set the internal ipadress to forward it to

BT Business - Replace Business Hub3 with Apple Air...

Hi All,
I have just had BT Buisness Infinity installed which included a BT Buisness Hub3 (not home hub) and a BT Open reach modem. Im trying to replace the Buisness Hub3 with an apple Airport Extreme with out much luck.
I have tried the below settings, but im assuming these are not working due being on a buisness setup
Account Name : [email protected]
Password : hit the space bar once
Service Name : Leave Blank
Connection : Always On
Could someone provide me with the bt business settings,
Many thanks in advance

This is a BT residential forum. If you post on the BT business forum somebody there may be able to help.
https://business.forums.bt.com/

Portforwarding through a shared internet connection.

So, I share internet from my Macbook's wifi to my Windows tower via ethernet. My question is, how do I portforward to my tower from my router. My router only accepts the last digit of the IP while my thrid digit is different in my tower. My router gives out the IP's 192.168.123.XXX (I know, 123 is weird, but it's fine) but my tower has the ip 192.168.2.XXX. As you can see they are different, and as I said before, my router only lets me input the 4th and last digit to directions.
So, back to my question, how do I portforward?

normal traffic uses http on port 80 by default
encrypted traffic using https is on port 443 by default
there are some sites that use different ports, but if you open 443 it should be ok for most
if you enable "personal web sharing" on the firewall tab it'll open those ports
non-default port numbers can be seen in the url, for instance...
http://www.port.com:8080/
...means http for this site is on port 8080 instead of port 80

Cannot connect 4-port switch to hub3

Hi, recently had infinity installed and we are absolutely impressed with it and speeds in excess of 75down which is fantastic!
So the setup we have is the router downstairs, and an ethernet going from that to the 4-port switch which was all set up for us by the engineer.
What I wanted to do however, was to plug another 4-port switch (a white 'PEAK' branded wifi switch) into one of the 4 ports of the hub3 in order to increase the capacity up to 7 ethernet sockets.
This setup worked fine when we was with sky over on the old DSL line where the 4-port swtich simply went into skys netgear switch and worked automatic.
However, since switching to bt infinity, for whatever reason, this white switch will not work with BT's hub3. By plugging a computer into the white switch, i can access the actual routers setup page by typing in 192.168.1.254, and can access all the settings. The following settings come up...
INTERNET: Connection Method - DHCP
Internet IP Address: 192.168.1.67
LAN: IP Address 192.168.1.254
LAN: Network Mask 255.255.255.0
LAN DHCP Server: ON
But like I say, the switch, which has got a cable coming from one of the HUB3's 4 ports into my old white PEAK routers INTERNET port, will not allow my old switch to access the internet.
So im really confused. Why will my old switch not work on the BT Infinity HUB3?

Thanks for both your replies. I read them earlier in the day, and been trying a few things out...
1st, I tried plugging the hub3 into lan4 on the peak switch, and the other 2 (sky and roku), along with my laptop for testing purposes into 1, 2 and 3, and all worked great!
Well... all wasnt so great, the connection was sporadic and intermittent, ping was low, and throughput was fast, but it was on and off. A speedtest.net would stall, web links sometimes took 2 or 3 clicks, and so on.
So what have I learnt? Well, the fact that it has an internet port (which I was wrongly trying to use before), means that it isnt a basic switch.
So today, I went and bought http://www.tp-link.dk/products/details/?model=TL-SF1005D. Plugged that in the same way, and everything works perfect!
So now, I have the router (downstairs), plugged into the hub3 (upstairs via existing ethernet run throuth the stairs), 3 ports plugged into 2 pc's and 1 youview box, the 4th into a powerline socket upstairs,, with the other powerline socket plugged in downstairs behind the TV, connecting to the tp-link switch socket 5, with the sky+HD and Roku XL plugged into 1 and 2 on the switch respectively, and after testing I now everything running lightening fast with HD on demand, and the world is good
So thanks for both your advice, i learnt a bit today.

Portforwarding for IP Camera

Hello!
I have recently purchased an IP Camera (Apexis) and installed it in my apartment. However, I still did not manage to set it up on my iPhone (using the Apexis iPhone app) so that I can connect to the Ip Camera while outside.
It seems that I need to set up the portforwarding on my router (Time Capsule). I have tried to follow the instructions from different websites but still did not succeed.
Did anyone face the same probelem and managed to solve? Can anyone help?
Thank you.
You

The camera provides a Manufacturer DDNS (h9114.apexisip.com), is this a dyndns?
Now my camera is connected via wireless and within the local network I can see the imanges.
The IP address I use is: http://10.0.1.5:85
That's what I tried to set up on my TC.
Other screen shots required?
These are from the camera:

Portforwarding refuses to work.

I have a lynksys wrt54g wireless router connected to DSL modem and no matter what I do my applications continue to complain that they are firewalled. Online port forwarding tests also fail.
I have set up a static IP on my PC and set up the router to forward on the ports needed.
I'm confident all settings are correct to the best of my knowledge and one application actually worked temporarily. Even though I still have the same IP and port it no longer works.
I've read several tutorials on static IP and portforwarding and am convinced somthing strange is happening.
Any advice appreciated.

I have the exact same problem.
I verified that my IP address in the suggested test is the same as what the router shows.
DMZ
Disabled
Port Forward
shareApp 4924 to 4924 Both .104 Enabled
Port Triggering
No settings
Windows IP Configuration
Host Name . . . . . . . . . . . . : desktop
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : cable.rcn.com
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : cable.rcn.com
Description . . . . . . . . . . . : Intel(R) PRO/100 VE Network Connect
on
Physical Address. . . . . . . . . : 00-0C-F1-B5-62-7F
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.1.104
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 207.172.3.8
207.172.3.9
Lease Obtained. . . . . . . . . . : Monday, June 04, 2007 10:04:04 PM
Lease Expires . . . . . . . . . . : Tuesday, June 05, 2007 10:04:04 PM
Netstat
Active Connections
Proto Local Address Foreign Address State PID
TCP 0.0.0.0:21 0.0.0.0:0 LISTENING 504
TCP 0.0.0.0:80 0.0.0.0:0 LISTENING 504
TCP 0.0.0.0:135 0.0.0.0:0 LISTENING 1028
TCP 0.0.0.0:443 0.0.0.0:0 LISTENING 504
TCP 0.0.0.0:445 0.0.0.0:0 LISTENING 4
TCP 0.0.0.0:1025 0.0.0.0:0 LISTENING 504
TCP 0.0.0.0:2190 0.0.0.0:0 LISTENING 1556
TCP 0.0.0.0:2869 0.0.0.0:0 LISTENING 1280
TCP 0.0.0.0:8046 0.0.0.0:0 LISTENING 2204
TCP 0.0.0.0:12678 0.0.0.0:0 LISTENING 1640
TCP 0.0.0.0:31203 0.0.0.0:0 LISTENING 3408
TCP 127.0.0.1:1446 127.0.0.1:1452 ESTABLISHED 3404
TCP 127.0.0.1:1452 127.0.0.1:1446 ESTABLISHED 3404
TCP 127.0.0.1:1470 127.0.0.1:1471 ESTABLISHED 3404
TCP 127.0.0.1:1471 127.0.0.1:1470 ESTABLISHED 3404
TCP 127.0.0.1:3131 127.0.0.1:8100 TIME_WAIT 0
TCP 127.0.0.1:3132 127.0.0.1:8100 TIME_WAIT 0
TCP 127.0.0.1:3135 127.0.0.1:8100 TIME_WAIT 0
TCP 127.0.0.1:3136 127.0.0.1:8100 TIME_WAIT 0
TCP 127.0.0.1:3137 127.0.0.1:8100 TIME_WAIT 0
TCP 127.0.0.1:3141 127.0.0.1:8100 TIME_WAIT 0
TCP 127.0.0.1:3142 127.0.0.1:8100 TIME_WAIT 0
TCP 127.0.0.1:3153 127.0.0.1:8100 TIME_WAIT 0
TCP 127.0.0.1:3156 127.0.0.1:8100 TIME_WAIT 0
TCP 127.0.0.1:3167 127.0.0.1:8100 TIME_WAIT 0
TCP 127.0.0.1:3171 127.0.0.1:8100 TIME_WAIT 0
TCP 127.0.0.1:3172 127.0.0.1:8100 TIME_WAIT 0
TCP 127.0.0.1:3174 127.0.0.1:8100 TIME_WAIT 0
TCP 127.0.0.1:3175 127.0.0.1:8100 TIME_WAIT 0
TCP 127.0.0.1:3177 127.0.0.1:8100 TIME_WAIT 0
TCP 127.0.0.1:3178 127.0.0.1:8100 TIME_WAIT 0
TCP 127.0.0.1:3181 127.0.0.1:8100 TIME_WAIT 0
TCP 127.0.0.1:3184 127.0.0.1:8100 TIME_WAIT 0
TCP 127.0.0.1:3185 127.0.0.1:8100 TIME_WAIT 0
TCP 127.0.0.1:3187 127.0.0.1:8100 TIME_WAIT 0
TCP 127.0.0.1:3191 127.0.0.1:8100 TIME_WAIT 0
TCP 127.0.0.1:3194 127.0.0.1:8100 TIME_WAIT 0
TCP 127.0.0.1:3195 127.0.0.1:8100 TIME_WAIT 0
TCP 127.0.0.1:3199 127.0.0.1:8100 TIME_WAIT 0
TCP 127.0.0.1:3200 127.0.0.1:8100 TIME_WAIT 0
TCP 127.0.0.1:3203 127.0.0.1:8100 TIME_WAIT 0
TCP 127.0.0.1:3206 127.0.0.1:8100 TIME_WAIT 0
TCP 127.0.0.1:3207 127.0.0.1:8100 TIME_WAIT 0
TCP 127.0.0.1:3209 127.0.0.1:8100 TIME_WAIT 0
TCP 127.0.0.1:8100 0.0.0.0:0 LISTENING 1556
TCP 127.0.0.1:8100 127.0.0.1:3138 TIME_WAIT 0
TCP 127.0.0.1:8100 127.0.0.1:3168 TIME_WAIT 0
TCP 127.0.0.1:8100 127.0.0.1:3182 TIME_WAIT 0
TCP 127.0.0.1:8100 127.0.0.1:3188 TIME_WAIT 0
TCP 127.0.0.1:8100 127.0.0.1:3192 TIME_WAIT 0
TCP 127.0.0.1:8100 127.0.0.1:3204 TIME_WAIT 0
TCP 127.0.0.1:8100 127.0.0.1:3210 TIME_WAIT 0
TCP 127.0.0.1:8200 0.0.0.0:0 LISTENING 1500
TCP 127.0.0.1:8200 127.0.0.1:3133 TIME_WAIT 0
TCP 127.0.0.1:8200 127.0.0.1:3134 TIME_WAIT 0
TCP 127.0.0.1:8200 127.0.0.1:3139 TIME_WAIT 0
TCP 127.0.0.1:8200 127.0.0.1:3140 TIME_WAIT 0
TCP 127.0.0.1:8200 127.0.0.1:3143 TIME_WAIT 0
TCP 127.0.0.1:8200 127.0.0.1:3164 TIME_WAIT 0
TCP 127.0.0.1:8200 127.0.0.1:3169 TIME_WAIT 0
TCP 127.0.0.1:8200 127.0.0.1:3170 TIME_WAIT 0
TCP 127.0.0.1:8200 127.0.0.1:3173 TIME_WAIT 0
TCP 127.0.0.1:8200 127.0.0.1:3176 TIME_WAIT 0
TCP 127.0.0.1:8200 127.0.0.1:3179 TIME_WAIT 0
TCP 127.0.0.1:8200 127.0.0.1:3180 TIME_WAIT 0
TCP 127.0.0.1:8200 127.0.0.1:3183 TIME_WAIT 0
TCP 127.0.0.1:8200 127.0.0.1:3186 TIME_WAIT 0
TCP 127.0.0.1:8200 127.0.0.1:3189 TIME_WAIT 0
TCP 127.0.0.1:8200 127.0.0.1:3190 TIME_WAIT 0
TCP 127.0.0.1:8200 127.0.0.1:3193 TIME_WAIT 0
TCP 127.0.0.1:8200 127.0.0.1:3196 TIME_WAIT 0
TCP 127.0.0.1:8200 127.0.0.1:3201 TIME_WAIT 0
TCP 127.0.0.1:8200 127.0.0.1:3202 TIME_WAIT 0
TCP 127.0.0.1:8200 127.0.0.1:3205 TIME_WAIT 0
TCP 127.0.0.1:8200 127.0.0.1:3208 TIME_WAIT 0
TCP 127.0.0.1:8200 127.0.0.1:3211 TIME_WAIT 0
TCP 127.0.0.1:8200 127.0.0.1:3212 TIME_WAIT 0
TCP 127.0.0.1:8201 0.0.0.0:0 LISTENING 3976
TCP 192.168.1.104:139 0.0.0.0:0 LISTENING 4
TCP 192.168.1.104:1478 66.102.1.99:80 ESTABLISHED 3404
TCP 192.168.1.104:2288 208.59.215.25:443 CLOSE_WAIT 3208
TCP 192.168.1.104:2289 208.59.215.25:443 CLOSE_WAIT 3208
TCP 192.168.1.104:2298 64.233.161.104:80 ESTABLISHED 3208
TCP 192.168.1.104:2308 67.133.200.80:443 CLOSE_WAIT 3208
TCP 192.168.1.104:2310 160.109.106.110:80 ESTABLISHED 3208
TCP 192.168.1.104:2925 208.59.215.26:80 TIME_WAIT 0
TCP 192.168.1.104:2927 64.233.161.164:80 TIME_WAIT 0
TCP 192.168.1.104:2928 64.233.161.164:80 TIME_WAIT 0
TCP 192.168.1.104:2935 64.233.169.147:80 TIME_WAIT 0
TCP 192.168.1.104:2950 208.59.215.32:80 TIME_WAIT 0
TCP 192.168.1.104:2953 64.233.169.147:80 TIME_WAIT 0
TCP 192.168.1.104:2956 64.233.161.91:80 TIME_WAIT 0
TCP 192.168.1.104:2957 64.233.161.91:80 TIME_WAIT 0
TCP 192.168.1.104:4489 208.59.215.25:80 CLOSE_WAIT 2668
TCP 192.168.1.104:4490 63.110.28.23:80 CLOSE_WAIT 2668
UDP 0.0.0.0:445 *:* 4
UDP 0.0.0.0:500 *:* 772
UDP 0.0.0.0:1047 *:* 1188
UDP 0.0.0.0:1067 *:* 1188
UDP 0.0.0.0:1093 *:* 1188
UDP 0.0.0.0:2190 *:* 1556
UDP 0.0.0.0:2512 *:* 3408
UDP 0.0.0.0:2907 *:* 1188
UDP 0.0.0.0:2913 *:* 1188
UDP 0.0.0.0:3456 *:* 504
UDP 0.0.0.0:4500 *:* 772
UDP 0.0.0.0:31203 *:* 3408
UDP 127.0.0.1:123 *:* 1124
UDP 127.0.0.1:1057 *:* 1640
UDP 127.0.0.1:1900 *:* 1280
UDP 127.0.0.1:2284 *:* 3208
UDP 127.0.0.1:4573 *:* 1780
UDP 192.168.1.104:123 *:* 1124
UDP 192.168.1.104:137 *:* 4
UDP 192.168.1.104:138 *:* 4
UDP 192.168.1.104:1900 *:* 1280

I have a BTHome Hub3 with infinity and used to use my TC wirelessly, I can't seem to get it to stay connected revert to my original back up

I have a BTHome Hub3 with infinity and used to use my TC wirelessly. Since I changed I cannot get my TC to stay connected, nor can I access the previously stored backups or files I had stored on it. I don't want to use an Earthnet cable. I can't get it to connect or stay connected to my MacMini either.

HELP ME PLEASE!!

RV042 portforwarding question

Hi everybody,
I have simple question:
I plan to buy RV042, cause I want to manage 2 WAN (PPPoE, cable) in load balancing mode and I have recently bought similar devices, they doesn't work correctly. So, I want to ensure with some experienced owner of this router: does portforwarding work OK with 2 WAN?
Some of similar routers, the allow only <WAN1>:22 => <sshserver>:22 or <WAN2>..., but not both at the same time.
Additional question: can I configure outgoing services, by port definition, handled by concrette WAN? (and the rest in load balancing model)
I have tried fingout these information in user guide, but these screenshots are tiny to read something usefull from theme.
Thanks a lot.
J.C.

"Hi Aaron,
To clarify, the 172 subnet of the Vendor is located at the same site as the Main office? Or is there another VPN tunnel between the Main Office and the Vendor?
If there is another physical location for the Vendor, is configuring another IPSec VPN tunnel from the Remote Office and the Vendor? Or is what your trying to accomplish to go through the Remote Office to Main Office VPN, then through the Main Office to Vendor Office VPN?
If you could provide a diagram, that would be great.
Thanks!
Dave"
-The vendor's subnet is at their location (not sure where they are located). We have two VPN connections on that RV04: the one to the remote location and the one for the vendor. I thought about configuring another connection to just connect the remote location up to the vendor, but they are trying to get us off of that and go to a t1 line (which may solve my problem).
But yes, what I was trying to accomplish was:
Remote-> (VPN) -> Main Office -> (VPN) -> Vendor
I talked to a friend of mine and he said I would have to setup hair pinning on that and he didnt think that it was possible on the RV042. I did a little checking on it and I don't think that it's possible either (but I could be wrong). I checked into connecting up the second WAN interface on the RV042 but we are out of public addresses. What I thought about doing is setting the vpn connection from the remote site to the main office to use WAN2 so that it wouldn't be hair pinning, but there are no more addresses.

May be wrong forum but how do I portforward?

Okay so I have netgear and my laptop is getting NAT:Moderate and I would like to switch it to open. Now I drop sometimes that is why I want to open my port. I put the netgear router on dmz on the fios but it's still not getting opened. I even portforwarded on both the routers and its not open. The actiontec can open itself but you see I have netgear+actiontec so how do I get my ports open?

Can't advise you on how to port forward the Netgear. Check the manufacturer's documention.
Actiontec port forward instructions can be found here:
http://www.dslreports.com/faq/16968
Some questions:
Which router is primary?
If Netgear is primary, why are you even trying to port forward the Actiontec?
How are the routers connected? LAN-to-WAN or LAN-to-LAN?
"The actiontec can open itself" What does that mean?
How are you determining the ports are not open? The game must be running and accepting connections for the ports to be considered open. See my response here: http://forums.verizon.com/t5/FiOS-Internet/Port-forwarding-woes/td-p/589945

Im having trouble portforwarding my linksys wrt54g router

ive looked at other post and one said something about on the status page of http://192.168.1.1/ it should be have the same internet ip address as on http://whatismyipaddress.com/ but mine are different... what should i do to get them to be the same for my portforwarding to work... also i have the portforwarding all set up and have tried many times to get it to work... im sure the settings for it are correct

Make sure you look for the Internet IP Address on the status tab of your router setup...If the Internet IP Address does not match with the IP Address on http://whatismyipaddress.com/ then it is highly possible that your ISP is a DSL ISP and the modem provided by your ISP is a modem/router and not just a modem...
However, the 192.168.1.1 IP Address is the default IP Address of your router...To setup Port Forwarding on your router your computer should be set to a fix ip address(When using a Linksys router, any fixed LAN IP address must be outside the DHCP server range (DHCP range is typically 192.168.1.100 thru 192.168.1.149), and it cannot end in 0, 1, or 255)...Then you can setup Port Forwarding for the Fix/Static LAN IP Address of your computer...

Kindle Fire HD not connecting to BT Hub3

Kindle fire hd - New replacement unit supplied by Carphonewarehouse. Keeps timeing out when trying to connect to Hub3
with DHCP error. The old kindle connected with no issues.
Took the kindle back to a Carphone warehouse - and the unit could not find any of their hubs !!
Can anyone help please.

can it see any wireless networks?
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Hub3 Portforward

Similar Messages

Maybe you are looking for