HUDSON 1500
Hello, I have just purchased a 3 hand set Hudson 1500.
Already it is a disaster.
Having fairly poor hearing, I opted for this equipment because it had an amplified message base.
As I said a disaster; with all volumes set to maximum, both on the base and hand sets, I can only hear tones 1&2, and then only barely, with my ear right up to the handsets, 3&4 are totally inaudible.
As a result of this, I have missed every incoming call over the couple of days I have had it installed. Most left no message on the answerphone, so I did not even hear that respond. One however did go to answerphone, but as I did not hear the call tone, only the answer phone working, by the time I got to it, the person had rung off.
I accept that my hearing is not the greatest, but the NTL triple set I have changed out, was pefectly audible to me, so it is a problem with the hudson.
Is there any way, short of clearing all my programming and returning the phones, that I can resolve this problem?
Any help appreciated.
Solved!
Go to Solution.
Hello, I must rather sheepishly climb down from my high horse.
I have found that there were more than four ring tones, pity it was not more obvious though. Also as there were some that were much louder--The problem is now solved.
However, it is worth mentioning that there are needlessly laborious methods for adding phonebook entries to all hand sets, and why the **bleep** do missed calls show on every handset and have to be laboriousl removed from each in turn. That is some poor programming.
Regards
Similar Messages
-
BT HUDSON 1500- NO SOUNDS AT ALL ON ONE HANDSET
Hello, one handset, no longer emits any tone, ring melody, nor key sounds.
Any ideas beyond just going through 'set up again, as I have done this multiple times, as well as putting on a different base.
RegardsHave you tried plugging your headset in? How about making a call (say voicemail) and turning speakerphone on? There could be some dust/debris in the headset jack and it may be forcing the device into headset mode. If this is the case, play some music or run an app like Pandora, and insert & remove the headset from the jack until audio returns. This is a fairly proven method of cleaning out the jack.
Hope this helps,
TreoAide -
BT Verve 450 Plus is out of stock! Ordering a phon...
The BT Verve 450 Plus is out of stock with the BT staff having no idea when it will be back in stock! THIS ITEM IS STILL BEING SOLD ONLINE BUT YOU WILL NOT GET IT!
I ordered this phone 3 weeks ago with the track your order saying it would be delivered 2 days after the order. It did not come so I left it the standard couple of weeks. Just phoned them and it is out of stock. Was told to go to my nearest BT Shop to see if they had any in stock, the 'BT Shop' would sell it to me at the same price as online and then get a refund from the online team.
This seemed reasonble so I hung up, googled nearest BT Shop and then realised, that BT do not have any real life Shops! I had been fobbed off by the friendly team in India. Phoned them back and was told I could only cancel the order and get a different phone. Even though the Verve 450 plus is still the 'Star Buy' online!!!
I asked them to just order me the Hudson 1500 plus instead as it is the same price but they cannot do this. No offer of free delivery or any compensation for the lies I had been told and the pain of waitin gweeks for a phone that is never going to come. Or fraudulently selling a phone online they know they do not have!!!
BEWARE.The BT shop is ran by Dabs.com which was bought by BT years ago but ran as a separate company and the BT shop is just a reskinned version of Dabs and the only reason why I use the BT shop they have cheaper p&p than dabs do, which is stupid.
Both Dabs and BT are showing stock of 14 yet you say that they claim it is out of stick, sounds like they are having a right problem with stock control or the call centre is trying to fob you off.
I would write to Dabs.com and ask why you were told to go to a BT shop when they don't exist any more and while is their stock control is so out of whack.
Even if you get fobbed off handling a complaint letter costs these companies money and the more that people do it the more likely they will change something.
As a consolaton Amazon has it cheaper than Dabs, with free delivey and Amazon stock control is bang on. -
Error 1500 in Adobe Acrobat 9 Pro Install
I have Windows 8.1, and I am attempting to download Adobe Acrobat 9 Pro from the content disc provided when I purchased Creative Suite 5 some time ago. During installation, I received the Error 1500 message. No existing forum is solving my problem. I have tried unregistering, then re-registering my Windows Installer. There are also no mid-installation processes in my registry. Also, the fact that I can only get customer support over a forum is unpleasant to me. That seems a little consumer elitist, don't you think? Anyway, I digress. If you can, please help.
Hi athoopes,
We apologize for the inconvenience, we would try to help you with this issue.
I would like to inform you that there could also be an issue with the compatibility between Acrobat 9 pro and windows 8.1 as it was not tested on win 8.1.
Check system requirements System requirements | Acrobat family of products
Kindly check if the log files(.GZ) for acrobat is getting created on the below mentioned location.
C:\Program Files\Common Files\Adobe\Installers
Thanks,
Atul Saini -
I search for apps about my hobby. There are over 1500 results. Each single result takes up the whole screen. I will have to swipe the screen 1500 times to see all the results. How can I see 8 or 10 results and scroll through fast? Thanks very much for any suggestions!
Bump:)
But I've found some online reviews of this and I think we
are stuck with this amazingly awful search system until
they realize people like me won't bother searching for or buying
Apps.
Does a novel display one sentence per page?
Do you listen to a radio documentary that transmits one word a minute?
Or how about a song that is broken into four parts because the singers ran out of breath?
Searching app products has never been easy or a pleasure, and now it's tougher than ever. Who has the time to swipe 1,600 times? It HURTS - and hurts my brain just thinking about it.
Woe is me!
Woe are we! -
How can i delete multiple e.mails from my iPhone 4 S. ? It shows the presence of more than 1500 e-mails. But when I try to open the account it shows that there a no e-mails. So i cannot delete them.
I would disconnect the email on your phone...
And reconnect again and if it still does that go on an actual computer, log on and delete the mails with ease...
Hope this helps..it may just need to be refreshed... -
Me compre un ipod classic de 160gb cada vez que trato de ponerle musica de mi disco duro externo solo copia hasta 1500 canciones y luego me congela el Itune y no lo puedo cerrar, me pide que restaure el ipod como de fabrica, lo hago y nada. Trato de cerrar el programa de itune y no me deja, trato de apagar el computador y no lo puedo apagar, he buscado para ver si tiene errores el disco del Ipod y me dice que esta bien. Lo he restaurado como 8 veces y le he puesto musica y videos pero siempre me borra todo. He aplastado Menu y Seleccion para entrar al sistemade diagnostic o del ipod y le pongo el test manual donde entro al IO y me dice q todo esta bien. Le he dado ya varios Format directamente desde el Windows 7 y nada tampoco, siempre me borra todo desde que pasan mas de 1300 canciones y me congeal todo el equipo. Ya no se que pensar de esta compania Apple porque no da ninguna solucion ha este tema.
I bought a 160gb iPod classic every time I try to put music on my external hard drive only copy up to 1500 songs and then freezes Itune me and I can not close, asks me to restore the ipod as factory, and do nothing . I try to close the program and itune will not let me, I try to turn off the computer and I can not shut, I looked to see if the iPod disk errors and says it's okay. I restored it about 8 times and I've put music and videos but I always delete everything. I crushed and Selection Menu to enter diagnostic sistemade or ipod and I put the manual test where I enter the IO and q tells me everything is fine. I have already given several Format directly from the Windows 7 and anything either, I always delete everything from passing over 1300 songs and I congeal whole team. No longer have to think of this company because Apple gives no solution has this issue.06-sep-2012 0:14
Me compre un ipod classic de 160gb cada vez que trato de ponerle musica de mi disco duro externo solo copia hasta 1500 canciones y luego me congela el Itune y no lo puedo cerrar, me pide que restaure el ipod como de fabrica, lo hago y nada. Trato de cerrar el programa de itune y no me deja, trato de apagar el computador y no lo puedo apagar, he buscado para ver si tiene errores el disco del Ipod y me dice que esta bien. Lo he restaurado como 8 veces y le he puesto musica y videos pero siempre me borra todo. He aplastado Menu y Seleccion para entrar al sistemade diagnostic o del ipod y le pongo el test manual donde entro al IO y me dice q todo esta bien. Le he dado ya varios Format directamente desde el Windows 7 y nada tampoco, siempre me borra todo desde que pasan mas de 1300 canciones y me congeal todo el equipo. Ya no se que pensar de esta compania Apple porque no da ninguna solucion ha este tema.
I bought a 160gb iPod classic every time I try to put music on my external hard drive only copy up to 1500 songs and then freezes Itune me and I can not close, asks me to restore the ipod as factory, and do nothing . I try to close the program and itune will not let me, I try to turn off the computer and I can not shut, I looked to see if the iPod disk errors and says it's okay. I restored it about 8 times and I've put music and videos but I always delete everything. I crushed and Selection Menu to enter diagnostic sistemade or ipod and I put the manual test where I enter the IO and q tells me everything is fine. I have already given several Format directly from the Windows 7 and anything either, I always delete everything from passing over 1300 songs and I congeal whole team. No longer have to think of this company because Apple gives no solution has this issue.
iPod classic, Windows 7, ME BORRA TODO Y SE CONGELA -
I just got a new IMac, and tried to download files from my old PC. When I go to,Finder, I have 1500 files under Developer, an 78 files under Other.
Most of these files I do not recognize. Can they be trashed? Why did they transfer? I used a flash drive for the transfer. Also, is there a way to transfer my older email files to this new computer?
Thanks for any and all help, I really need it.
TomDid you use the Migration Assistant to help set up the new iMac using some of the files in the older PC? Some likely won't mean much, unless you have applications that can use or convert them. There's also a way to use the software Time Machine to import data files from an external or another computer, so you may have used that, too.
Hopefully someone with experience in a similar issue will reply...
Good luck & happy computing! -
HP PSC 1500 and network printing on both Mac and Windows computers
I have an HP PSC 1500 hooked up to a network on my Windows XP desktop, which is the hub for my home network. I've purchased a MacBook Pro and want to be able to use the HP printer but it doesn't appear as a printer option on the MacBook. I've loaded Bonjour Printer Wizard but it doesn't recognize my printer. Does this mean I now need to purchase a new printer or am I simply overlooking a network setting????
Any help would be appreciated.I managed to figure it out. Read a post by "sebas10" dated Nov 5, 2006. Here are the steps I followed.
1. Install Gimp-print, ESP Ghostscript and HPIJS Foomatic. You will to download them off the Web. Google them to find the sites.
2. Go to "System Preferences". Select "print & Fax".
3. Click on "+" to add a printer.
4. In "Protocol" choose "HP Jet Direct - Socket"
5. Type in the IP address of your print server.
6. In "Print Using" choose HP.
7. Then choose HP PSC 1100 Foomatic/hijs.
And lo behold I finally managed to print to the HP Deskjet F388 All in One after about 6 months of strugling to find a solution. Shame on HP for not providing a solution for this. -
i have over 5000 songs on my computer. Which is from songs bought from iTunes and from cd. i had all the songs on my iPod. went to download new songs and only 1500 songs are download . please help
Since all of your music came from your computer in the first place, then it should still be there and should be included in your backup copy of your computer.
" it told me when i pluged hers in 2 ipods could not use the same account"
This is not true. You have misunderstood.
You can sync as many ipods/iphones/ipads as you like to one one library. -
my IT department set up my Iphone and transferred the images from my Blackberry. I have over 1500 images showing in "Photo Library" and lots of them are duplicates (same image). When I hit edit it will not allow me to delete them, delete is not an option shown. How do I get rid of the duplicates?
In Photo library, when I hit edit the only avail options are share or add to. Please help, i dont want 1500 images on the phone.Are they really duplicates or are you simply referring to the Photo Library?
Just as a song is in your itunes library and the exact same song can be accessed via a playlist, all synced photos are in the Photo Library and those exact same photos ( not duplicates) can be accessed from the chose folder/album.
You delete these pica the same way you put them there. The sync process. Deselect them in itunes and sync. -
FlexUnit not generating TestRunner.swf when compiled with Hudson / Ant
I've been dabbling with FlexUnit (4.1 RC2) and CI under Hudson. To that effect, I chose to test the server configuration with the sample CI project that comes with the 4.1 RC2 distribution of FlexUnit, and compiling the project with Hudson (now Jenkins after most recent update) and Ant (1.8). It doesn't work because it does not seem to compile the TestRunner swf. After exploring the artifacts in the workspace, it appears that the TestRunner mxml file is created as you would expect, but then the mxmlc compiler is seemingly silently failing to complete the compile step.
It's worth noting at this point that compiling on my local dev machine does work (as it does on a half dozen other dev machines), also, the Hudson configuration is good for compiling other Flash projects. So mxmlc from the Flex SDK is setup and compiling other projects successfully.
Here's the first part of the build log from Hudson / Jenkins as it tries to compile the sample project:
compile:
[mxmlc] Loading configuration file /opt/flex/frameworks/flex-config.xml
test:
[flexunit] Validating task attributes ...
[flexunit] Generating default values ...
[flexunit] Using the following settings for compilation:
[flexunit] FLEX_HOME: [/opt/flex]
[flexunit] player: [flash]
[flexunit] sourceDirectories: ["/var/lib/jenkins/jobs/FlexUnit4SampleCIProject/workspace/FlexUnit4SampleCIProject/src/main/flex"]
[flexunit] testSourceDirectories: ["/var/lib/jenkins/jobs/FlexUnit4SampleCIProject/workspace/FlexUnit4SampleCIProject/src/test/flex"]
[flexunit] libraries: ["/var/lib/jenkins/jobs/FlexUnit4SampleCIProject/workspace/FlexUnit4SampleCIProject/libs/flexunit-4.1.0_RC2-4-as3_4.1.0.16076.swc","/var/lib/jenkins/jobs/FlexUnit4SampleCIProject/workspace/FlexUnit4SampleCIProject/libs/flexunit-aircilistener-4.1.0_RC2-4-4.1.0.16076.swc","/var/lib/jenkins/jobs/FlexUnit4SampleCIProject/workspace/FlexUnit4SampleCIProject/libs/flexunit-cilistener-4.1.0_RC2-4-4.1.0.16076.swc","/var/lib/jenkins/jobs/FlexUnit4SampleCIProject/workspace/FlexUnit4SampleCIProject/libs/flexunit-uilistener-4.1.0_RC2-4-4.1.0.16076.swc"]
[flexunit] Found SDK version: 4
[flexunit] Created test runner at [/var/lib/jenkins/jobs/FlexUnit4SampleCIProject/workspace/FlexUnit4SampleCIProject/target/bin/TestRunner.mxml]
[flexunit] Compiling test classes: [org.flexunit.demo.EchoPanelTest, org.flexunit.demo.SampleTest]
[flexunit] Executing '/var/lib/jenkins/tools/JDK_6/jre/bin/java' with arguments:
[flexunit] '-Xmx256M'
[flexunit] '-jar'
[flexunit] '/opt/flex/lib/mxmlc.jar'
[flexunit] '+flexlib'
[flexunit] '/opt/flex/frameworks'
[flexunit] '-output'
[flexunit] '/var/lib/jenkins/jobs/FlexUnit4SampleCIProject/workspace/FlexUnit4SampleCIProject/target/bin/TestRunner.swf'
[flexunit] '-source-path'
[flexunit] '/var/lib/jenkins/jobs/FlexUnit4SampleCIProject/workspace/FlexUnit4SampleCIProject/src/main/flex'
[flexunit] '/var/lib/jenkins/jobs/FlexUnit4SampleCIProject/workspace/FlexUnit4SampleCIProject/src/test/flex'
[flexunit] '-library-path+=/var/lib/jenkins/jobs/FlexUnit4SampleCIProject/workspace/FlexUnit4SampleCIProject/libs/flexunit-4.1.0_RC2-4-as3_4.1.0.16076.swc'
[flexunit] '-library-path+=/var/lib/jenkins/jobs/FlexUnit4SampleCIProject/workspace/FlexUnit4SampleCIProject/libs/flexunit-aircilistener-4.1.0_RC2-4-4.1.0.16076.swc'
[flexunit] '-library-path+=/var/lib/jenkins/jobs/FlexUnit4SampleCIProject/workspace/FlexUnit4SampleCIProject/libs/flexunit-cilistener-4.1.0_RC2-4-4.1.0.16076.swc'
[flexunit] '-library-path+=/var/lib/jenkins/jobs/FlexUnit4SampleCIProject/workspace/FlexUnit4SampleCIProject/libs/flexunit-uilistener-4.1.0_RC2-4-4.1.0.16076.swc'
[flexunit] '-headless-server=true'
[flexunit] '/var/lib/jenkins/jobs/FlexUnit4SampleCIProject/workspace/FlexUnit4SampleCIProject/target/bin/TestRunner.mxml'
[flexunit]
[flexunit] The ' characters around the executable and arguments are
[flexunit] not part of the command.
[flexunit]
[null] Loading configuration file /opt/flex/frameworks/flex-config.xml
After this line I would expect another line indicating the swf output and the size of the file - as I see in the build log on my dev machine - but that never happens because mxmlc never writes the swf. I have no idea why this fails.
Then there is a bunch of other stuff to do with attempting to launch the test with Xvnc:
[flexunit] Using the following settings for the test run:
[flexunit] FLEX_HOME: [/opt/flex]
[flexunit] haltonfailure: [false]
[flexunit] headless: [false]
[flexunit] display: [99]
[flexunit] localTrusted: [true]
[flexunit] player: [flash]
[flexunit] port: [1024]
[flexunit] swf: [/var/lib/jenkins/jobs/FlexUnit4SampleCIProject/workspace/FlexUnit4SampleCIProject/target/bin/TestRunner.swf]
[flexunit] timeout: [60000ms]
[flexunit] toDir: [/var/lib/jenkins/jobs/FlexUnit4SampleCIProject/workspace/FlexUnit4SampleCIProject/target/report]
[flexunit] Setting up server process ...
[flexunit] Starting server ...
[flexunit] Opening server socket on port [1024].
[flexunit] Waiting for client connection ...
[flexunit] Entry [/var/lib/jenkins/jobs/FlexUnit4SampleCIProject/workspace/FlexUnit4SampleCIProject/target/bin] already available in local trust file at [/var/lib/jenkins/.macromedia/Flash_Player/#Security/FlashPlayerTrust/flexUnit.cfg].
[flexunit] Executing 'gflashplayer' with arguments:
[flexunit] '/var/lib/jenkins/jobs/FlexUnit4SampleCIProject/workspace/FlexUnit4SampleCIProject/target/bin/TestRunner.swf'
[flexunit]
[flexunit] The ' characters around the executable and arguments are
[flexunit] not part of the command.
[flexunit]
[flexunit]
[flexunit] Error: Invalid SWF file name
[flexunit]
[flexunit]
[flexunit] Stopping server ...
[flexunit] End of test data reached, sending acknowledgement to player ...
[flexunit] Closing client connection ...
[flexunit] Closing server on port [1024] ...
But of course by this point we're toast because mxmlc has not output the TestRunner swf, so the filename is invalid. If anyone has any idea what's wrong, or any suggestions on things to try, please let me know, we're desperate!!
Thanks for your time.Try ensuring the flash player on the server is definitely the Flash Debugger, also you have set headless to false, it needs to be true.
-
I have Just downloaded the latest update to iTunes 11, it no longer shows any duplicates, and there are many, over 1500 songs. Also what is this iCloud? I neither want it, use it or need it, so how do I get rid of it? I have enough trouble merely getting in contact with iTunes, you don't make too many allowances for those of us who are not really computer savvy. Maybe I can dump the lot and revert to a friendlier (for me) version?
Sorry but I know of no way of not backing up for a PC.
-
How to overcome error 1500 when installing reader on Windows 8?
Trying to install Acrobat Reader on Windows 8. After downloading, I keep getting an error 1500 (another installation is progress). I've tried doing the recommended registry edit (removing an "inprogess" key -- it's not there) and running msiexec/unreg and msiexec/regserver. After taking these steps and trying again, error 1500 occurs at the same point. Is this a Windows 8 issue? Anyone know of a solution?
Try downloading the offline installer from http://get.adobe.com/reader/enterprise/
Restart Windows to make sure nothing is running, then run the downloaded installer.
[topic moved to Adobe Reader forum] -
Mailbox Databases - 1500 users Exchange 2010 DAG
I have the following setup for a 5 server DAG setup and would like to know the recommended setup for high availability for all user databases. I would like the databases copied to several DAG members servers, but am unsure as to how i should stagger the
database replication. Please see the drive sizes below and send me feedback/recommendations.
Each of my DAG member servers (mailbox servers) has the following storage space available:
C:\60GB(O/S), D:\1TB(Mailboxes), E:\1TB(Mailboxes) F:\(logs)
How many databases should i create to maximize efficiency and give best user performance/experience?
To how many DAG member servers should i copy the database in order to achieve a reasonable amount of High Availability?
Again, I have 1500 users and 2TB per server to accommodate mailbox databases.
Users average 500MB mailbox quotas.
Can i create the DAG replicas on the second drive (E:\) or should i just use both terabyte volumes exclusively for users mailboxes?Hi,
5 members in a DAG and one database created for every member, I suggest you create three copys for a database like the following figure. Any two servers corruption couldn't interrupt any client connection.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Sean Xiao
TechNet Community Support
Maybe you are looking for
-
Save as RTF-feature in Pages 09
I work a lot with DEVONthink Pro Office, a tool for ordering, categorizing and searching content (mostly documents for me). Unfortunately, while DTPO shows pages files and can even search them, the integration is not complete and leaves something to
-
A window is popping up everytime I open firefox. It says "Want more options? Right click the app" It will not let me close it and won't let me continue on firefox until I give it an answer
-
Hi, For many years i use SapDB with Linux, this month i migrate to MaxDB 7.6.2.10 running on Linux x86_64, because of new features on Solaris 10 i like to migrate the O.S. too, then i want to know if anyone wish to share with us the experiences, trou
-
Best replacement for Adobe Forms Central survey functionality
I am disappointed that you are discontinuing Adobe Forms Central... Please advise of what other applications do you have that provide the abilitity to create quick surveys that I can email out and then view all of the feedback and create reports. Th
-
URGENT-Library Image Files question
Are these generated locally by whoever uploads the content to the server? I am trying to publish from a different location and I get an error message saying "Cannot upload library image files".