Huge discrepancy between design mode and exported html.

I added some html from videojs.com to my adobe muse website. As long as I put this video to the left of the website there is no problem, but when I put it more to the right the footer moves along with it. This ONLY happens when I export the page, this does not happen in DESIGN mode in muse itself. Can anybody please help me with this problem?

Hi Parikshit,
The sticky footer sounded promising, but it didn't change anything. I still can't move those bottom toggles to be at the desired ruler mark.
As for the margins... Its my understanding that whatever you have in a master page will be applied to the pages you assign, but the content and spacing is different. There is no content that would push the page to extend further down, which I have seen done before. And because I cannot individually move the toggles I have no way of adjusting the spacing. I am going for a seamless look between pages, where the size and content of the page remains the same while the images in my portfolio change.
Even if I go to Page > Page Properies and try to enter the correct numbers, it still doesn't affect the page.
Does that clarify?
Also, I am running 7.1 on a Mac OS 10.9...does that have something to do with it?
Thank you so much for responding!
- Carly

Similar Messages

  • Type shift between design mode and preview mode in Muse.

    My type shifts / moves positions between design and preview modes. It then justifies differently in differnet Web Browsers. This mean I end up positioning things incorrectly in design mode to accommodate the error when published. I am using the Droid Sans Websafe font from Typekit but it doesn't seem to matter which font is used as the bug still occurs. See the attached images; the left is in Design and the other in Preview. See how the formatting shifts within the software. Also the weight of the headline FORDNESS changes slighlty. On other pages, this headline shifts a few pixels across and down. Any suggestions?

    Hi,
    Text layout and rendering varies from browser-to-browser (and between Muse Design and Preview modes). This may come as a suprise if you have a Print background, but is the reality of the web medium. I'll point you to some previous forum posts that may be instructive.
    Layout shifts because of line-break changes
    http://forums.adobe.com/message/6032336#6032336
    Layout shifts because of font metrics
    http://forums.adobe.com/message/6045303#6045303
    Text rendering differences (general)
    http://forums.adobe.com/message/4778838#4778838
    Text thickening (specific to Safari)
    http://forums.adobe.com/message/5862858#5862858
    Hope this helps.
    Abhishek

  • Issues between Design mode and Preview mode

    SERIOUS issues going from Design to Preview in Muse.  Line breaks change, objects on the page shift, etc.  This happens when I look at my page in the preview mode through Muse, as well as when I preview the page in a browser.  I also get a warning message saying there is a font being used that is not installed and has been replaced.  This is a font that I do, in fact, have installed on my system, but after getting the error message so many times, I re-formatted all text to a Web Font called Questrial, and still get the error message referring to the previous font.  SO FRUSTRATING.  Any ideas?

    I have this problem where the images are not appearing or are appearing cropped.

  • Difference between Simple maintanence and Export mode and Organisation plan

    Hi all,
    Can any one please explain the difference between Simple maintanence and Export mode and organisational plan in SAP easy access.
    Thanks & Regards,
    Naga

    Expert Mode Infotype Maintenance: This interfaces allows you to edit individually selected objects in OM (Org Units, Positions, Jobs) via infotypes. 
    Expert Mode: Simple Maintenance Interface (PPOM_OLD) is used to quickly create a new Organizational Plan. As a user, you can pretty much maintain large volumes of data very easily ( i.e create several objects simultaneously), without having to go through the more "Performance Intensive" Org and Staffing interface.
    In accessing the Simple Maintenance interface to create your org structure, the initial screen requires you to specify which evaluation path you want to create your org structure.
    Organizational Plan: This is what provides you with a complete picture of an enterprise's environment. It comprises elements (objects like Org Units, Positions, Jobs etc) which are used as building blocks for creating an Organizational structure.
    Need more information? Let me know.

  • Hook to run script between Consumption mode and Contribution mode

    Hi,
    I am developing a Web Portal page with a Region Template. My page will need to have an accordion. My Region Template will push out raw HTML, and I will use jQuery to put accordion behavior on top. However, the jQuery will run at "onload", $(document).ready(function()), to initialize my raw HTML to be an accordion. It works fine in view mode, however when I switch to Contribution mode, the page shows a raw HTML.
    I am looking for a hook that I can run JavaScript when switching between Consumption mode and Contribution mode. This way, I can put my initialization script in that hook. I have looked in the iDoc documentation but couldn't find any.
    I would be grateful if you can help me out. Thank you very much for your time.
    Linh
    Edited by: 942214 on 22-Jun-2012 00:20

    Are you sure your jquery isn't getting called? Switching between contribution mode should cause a full page refresh by triggering the WCM.ReloadURL js function.
    Have you put in debug statements to ensure that the $(document).ready(function(){}); really isn't being called?
    -ryan

  • What is difference between TEXT mode and BINARY mode?

    Hi,
              What is difference between TEXT mode and BINARY mode? In TEXT mode what is "ENCODING DEFAULT".
    OPEN DATASET wl_filename FOR INPUT
                              IN TEXT MODE ENCODING DEFAULT.
      OPEN DATASET wl_filename FOR INPUT
                              IN BINARY MODE .

    Hi vishnu,
    1. files like .TXT files are considered to be text,
       and other files like .EXE . DOC etc are binary files.
    2. In text files, after each line, there are two
       internal binary characters
      one for line feed and another one for newline.
    3. But, we don't have any meaning for it,
       when we view such files in notepad, for eg.
       Hence, to only get the understandable content,
       we should open such TXT files, in text mode.
      (we can also open them in binary mode,
      but we will get two extra characters after each line,
       and such two extra characters are meaningless
      for interpreting the text)
    4. In binary mode, each byte by byte is considered,
       without any meaning.
    regards,
    amit m.

  • Difference between Designer 6i and Forms 6i?

    difference between Designer 6i and Forms 6i?

    Designer 6i is more related to the development cycle of a database and the various tools that access the database(from creating the database entity relationship diagrams to creating the physical tables/ddl). Forms 6i is more geared towards data management of the database. Designer 6i has tools to help auto-generate 6i forms.

  • Discrepancy between the confirmation and deletion of qRFC-LUWs

    Hi experts,
    When I started PC to loading data from CRM system,data loading stopped.I check the
    Log.
    "discrepancy between the confirmation and deletion of qRFC-LUWs" (Message no. RSQU016)
    How to solve it? Thank you.

    Hi Gavin,
    <b>Please use Transaction code, SMQ1.</b>
    Drill in to the queue and delete the respective queue.
    Or use transaction <b>LBWQ</b>
    to get to the same information. Select your queue and delete it.
    Regards,
    Aby

  • Discrepancy between IM stock and WM Stock

    Hi experts,
    We found there is discrepancy between IM stock and WM Stock.Before configuring WM storage types , IM Stocks are not syched. So WM stocks are showing less then IM stocks,. Now i need to synch up the IM stock and WM stock. what we needs to do. Can you please guide us.
    Thanks & Regards,
    Vamsi

    OR
    have a look at using transaction LX23 (provided you dont use HUM this should help you determine/ analyse and post any differences between IM and WM).
    thanks,
    A
    LX23: Stock Comparison Inventory Management / Warehouse Management
    Description
    Using this report you can generate an inventory comparison between the IM System (Inventory Management) and the WM System (Warehouse Management).
    On the selection screen, you can limit the area for comparison by entering the plant / storage location, plant / warehouse number or only the warehouse number.
    In addition to specifying the area, you can also determine the extent of information to be issued.  Here you have three options:
    1. "With bin inventory"
    In addition to generating the corresponding stock figures, you can also have a list of the corresponding WM bin quantities included.
    2. "All data on material"
    Even if only one difference occurs in one of the listed combinatations of material / batch / special stock indicator / supplier, all material combinations are listed. This can be very helpful when searching for errors.
    3. "Clear differences"
    If you mark this field, the system will generate a batch input session. By starting the batch input session, the differences to be cleared are removed in the IM system.  Negative WM stock figures and stock differences in returns will not be cleared.
    If you want to have a batch input file generated for the purpose of clearing the differences, it is important, for consistency reasons, that the materials in the respective warehouse are blocked in order that postings affecting stock figures can be prevented.
    CAREFUL: If you generate this session, all the material stocks belonging to the respective warehouse number are blocked completely, that is, for the duration of the program, no postings affecting the stock in the warehouse will be possible!
    Prerequisites
    The comparison is also possible for warehosue numbers managed on a decentralized basis.
    Output
    You receive a list with various materials. The list contains the following information, for example:
    The first line contains the plant, storage location, warehouse number, material number, total stock in inventory management, total stock in the warehouse, and the difference between the stocks.
    The following line contains the first combination of batch / special stock indicator / supplier (or sales document and item number for sales order stock) and stock category (Q,R,S, ), the stock figures in Inventory Management, in Warehouse Management, and the difference.
    If a batch input session is to be generated, the list contains a note in the log as to whether or not a session has been generated or behind the pushbutton "non-postable stocks", which materials could not be cleared because of negative stock figures or because they belong to returns stock.
    Edited by: WILSAQ on Aug 11, 2009 12:09 AM

  • Huge Variance between Target cost and Actual Cost

    Hi,
    In Product Costing,I am getting Huge variance between Target cost and Actual Cost.It is showing the Target Cost as ZERO.Why i am getting this target cost as Zero? what could be the reason? Kindly help me in fix this issue.
    Thanks
    Supriya

    Dear,
    First do the GR final DEV for Production order
    You need to do the variance calculation in KKS2, then when you save the variance, the target cost is calculated.
    Target cost appear after GR.  And you will get the Variance also right.
    Please try and come back.
    Regards,
    R.Brahmankar

  • Why was yesterday the typefont Lato displaying good in design mode and today looks like Arial?

    why was yesterday the typefont Lato displaying good in design mode and today looks like Arial? In preview mode its looking good

    I'm having exactly the same problem as Kitcarhans just as of now, with the same font (Lato).
    I tried to follow Abhishek's recommended steps, but they are unclear to me, and in any case, didn't have any effect.
        "2. Rename the folders named tk1 and tk2 in the following locations"
    Not sure what this step is instructing me to do; rename them to what new name? Any? The same?
        "3. Launch Muse and add the font again"
    The font was never removed… was it supposed to have been? Well, in any case, I tried removing and then re-adding, but no effect there either…
    Could you clarify these instructions for me, or if they don't apply to the current problem, advise? The two websites I'm working on now both use Lato, so I can't do much of anything until I solve this problem…
    Thanks.

  • BC won't allow me to insert code (scripts) between the /body and the /html tags.

    Hi guys,
    So I have this weird problem. I'm trying to insert some codes between the </body> and the </html> tags in the page templates. It's saving it. But if you check the page, the code is showing before the </body>, not after. Here's the code that I'm trying to insert.
    <script src="http://i.simpli.fi/dpx.js?cid=1534&action=100&segment=198566&m=1"></script>
    I have also tried adding this code by downloading the templates through ftp, adding the code, then uploading it to the server. Same thing. I even added type="text/javascript" in the code. Still no go. BC wouldn't insert it between </body> and </html>. Any ideas guys?
    - Jeff

    So an update.
    I was told by Adobe chat support to try adding the script after the body via javascript.
    So I added this before </head>
    <script type="text/javascript">
    var script = document.createElement('script');
    script.src = '//i.simpli.fi/dpx.js?cid=1534&action=100&segment=198566&m=1';
    script.type = 'text/javascript';
    $("html").append(script);
    </script>
    Still not working. Any ideas guys?

  • Timeline window missing button to switch between frame mode and timeline mode

    I'm using Photoshop CS6 Extended.
    This is what my timeline looks like now.
    In tutorials they refer to a button that should be to the left of the drop menu that says "forever". The button is supposed to allow you to switch between frame mode and timeline mode.
    this is what the timeline window looks like in timeline mode and with the button that allows you to switch.
    I've already tried reinstalling and upgrading to CS6 extended, as some forums suggested.
    Please help. Animation is the core reason that I need photoshop and without this button I'm extremely limited. Thanks.

    OK. This should work. Copy and past the below script into Script Editor, save it as an AppleScript application to the Desktop. Double-click it and it should change to grayscale. Double-click it again and it'll toggle back.
    tell application "System Preferences" to activate
    delay 1
    tell application "System Events"
    tell process "System Preferences"
    click the menu item "Universal Access" of the menu "View" of menu bar 1
    click the radio button "Seeing" of the first tab group of window "Universal Access"
    click the checkbox "Use grayscale" of tab group 1 of window "Universal Access"
    end tell
    end tell
    tell application "System Preferences" to activate
    delay 1
    tell application "System Events"
    tell process "System Preferences"
    click the menu item "Universal Access" of the menu "View" of menu bar 1
    click the radio button "Seeing" of the first tab group of window "Universal Access"
    click the checkbox "Use grayscale" of tab group 1 of window "Universal Access"
    end tell
    end tell
    tell application "System Preferences" to quit

  • Nokia E71 Difference between Switch mode and Profi...

    I have Nokia E71, Phone having option to switch modes and also we have profile option.
    Can some body explain the difference between switch mode and having different profile ?.
    Thanks

    The profile impacts things like default ringtone, vibration settings, etc.
    With the mode switching you can also switch active standby applications and plugins (e.g., work vs. free time).
    Personally, I don't use the modes, and with profiles, I only use "General" and "Silent" and don't bother with others.

  • Difference between bridge mode and routed mode on CSS

    Hi,
    Could some one tell me the difference between routed mode and bridge mode.
    Regards
    Neha

    Hi,
    routed mode:
    The CSS acts as a router, it routes packets from the client to the server. The server has the ACE configured as default-gateway.
    There is a client-side VLAN and a server-side VLAN. These VLANs have different subnets.
    Bridged mode:
    The CSS acts as a bridge, it switches frames from the client to the server. The server has the upstream router configured as default-gateway.
    There is a client-side VLAN and a server-side VLAN. These VLANs have the same subnet, but different VLAN IDs. The ACE bridges the client traffic from the client-side VLAN to the server-side VLAN.
    Bridged mode would be most used in case one cannot change the servers IP addresses, or if address space is an issue.
    Hope this helps.
    Kind regards,
    Dario

Maybe you are looking for