Huge Dual Monitor Problem :( Please Help !!!

Hey, i'm having issue with setting up the dual monitor connection.
I took a video so you can see what the problem is .. basically, when i move a window in the middle of both monitors, the window either goes to one monitor or the other one. here is the link .. https://www.youtube.com/watch?v=gIep7zYwi-o&feature=youtu.be
Now, i want it to be on both monitors at the same time so that i can have the window extended on both monitors; so that it will be visible on both monitors at the same time (Not mirror mode)
How do i do this ? I've see on youtube this being done .. check out here (skip to 4:37) https://www.youtube.com/watch?v=qJldWNcQl7M

If you are running Mavericks, you probably want to un-check "Displays have separate Spaces" in System Preferences > Mission Control.

Similar Messages

  • Monitoring problem-Please help

    Hey everyone, I'm trying to figure out how to monitor audio in Audition CS6.  I'm using a Mac and just upgraded from Soundtrack Pro.  I easlly monitored my audio though my headphones while using Soundtrack.  My setup consists of my mic going to my usb interface which is a Saffire 6 usb which then runs to my Mac via USB.
    I'm confused on what I've researched so far....can I monitor audio in Waveform?  or in Multitrack? or both?
    My settings in Audition consist of:
    Audio Hardware:
    Device Class: CoreAudio
    Default Input: Saffire 6
    Default Output: Built in Output (I also have the option of choosing Saffire 6 here, but doesn't make adifference in what I've tried)
    Master Clock: Saffire (can also choose Built in Output here)
    Clock Source: Internal
    i/O Buffer Size: 256
    Sample Rate: 44100
    In Audio Channel Mapping:
    Device Saffire 6USB
    File Channels show L and R with L as Mono.  Both are Saffire 6USB 1
    Output
    Device:Built in Output
    File Channels show 1 [L] and 2[R]. 
    L has device channel of Built in Output 1 and R has Built in Output 2
    Are these the right settings?  I've noticed on Multitrack mode that there is an I for "monitoring input" and I've played with that with no new outcome.
    Any help would be most appreciated!  Thanks and if you need more info please ask...I tried to put down everything I could think of. 

    You probably should use the headphone monitor on your Saffire 6 which is set up for this sort of thing--it has a function to mix between playback from  the computer and the input (in your case, your mic).
    Audition doesn't provide an output when you're in Waveform view--this is pretty normal, hence the facility on your Saffire 6.
    Multitrack is set up differently and there IS a feature to select and mix tracks to send to the output when recording in Multitrack--however, even here the norm would be to do the mix between pre-recorded tracks and your new source(s) in the audio interface.
    I'm not a Mac user but, assuming there is some similarlty between PC and Mac, it can be a pain to use two different audio devices--there IS a way to do it in a Mac (I think it's called setting up a composite device in core audio) but it's probably far tidier and easier to set up using  the Saffire for everything.
    Finally (and perhaps a Mac user can confirm or deny what I'm about to say) I suspect you might be better off downloading and installing the dedicated device drivers from the Focusrite web site rather than using Core Audio.

  • Huge MacBook Pro Problem - Please Help!

    Okay I have so many problems I don't even know where to begin.
    I bought my 13" MacBook Pro in August of 2009. Two days after I got it, it completely stopped working. I took it to an Apple authorized repair shop, who told me I had spilled iced tea all over it and it was ruined, never to be fixed again. Long story short, I took it to a different Apple authorized repair shop, only to find out that the battery had leaked inside of it. When I got the computer back two months later, it would only remain powered on as long as it was connected to the charger. I took it back and had it fixed. All said and done, I finally had a working MacBook Pro in January of 2009. (Although much of the delay had to do with me living hundreds of miles from the repair shop).
    Fast forward to July of 2011. Mountain Lion, I believe it was, had been released, and I was going to upgrade from Leopard. I worked in a Museum and my boss said that I could use their DVD of Snow Leopard to upgrade, so I could download Mountain Lion through the App Store, since I was using my computer for work a lot and they had a license. I upgraded and I have had nothing but nightmares since. For the past year and a half, my computer is constantly freezing, applications quit unexpectedly, and if I have more than one tab open and happen to do something safari doesn't agree with, I get a notice that "Webpages are unresponsive. Please click continue to force reload" or something along those lines which then forces every site in all tabs to reload but often just causes safari to crash. Furthermore after Safari crashes when I open it again, I have to leave it for AT LEAST ten minutes before the app becomes responsive. However, if I force quit safari immediately after I open it (post-crash), then open it again - it works fine. Weird, I know.
    Now I have some really big problems. My computer is constantly going into a kernel panic, where I get the grey screen informing me to restart (and by constantly, I mean I'm shocked I've been able to type this much and not lost it all to a restart warning). Sometimes when I restart as soon as I log in and get the "you had to restart because of a problem, send a report to apple" dialogue, I immediately have to restart again. Sometimes when I restart, I get the circle/slash and it won't turn on. And lastly now, in the last hour (of which I have had to restart twice), it refuses to boot in anything but safe mode. I'm not holding down the shift key.
    Oh and another thing of note - it refuses to open some programs, giving various errors; it refuses to allow me to move around files (error code -50); and it refuses to let me empty the trash (error code -50 again). I'm trying to free up a ton of space on my harddrive but it's proving difficult because of my MacBook's refusal to cooperate.
    It's all backed up so I can do what I need to do to fix or alter this situation. My boyfriend wants me to just rescue everything from my harddrive and buy an air, but I'm having a lot of trouble considering that because of the amount of issues I've had with both this computer and my iPhone Bring back the iBook! They were the best.
    NOTE: I had to restart my computer twice since I started writing this. Thank goodness for autosave on the apple communities.

    Thanks.
    This is what I'm getting for my most recent:
    Sat Jan 12 20:58:32 2013
    panic(cpu 0 caller 0x2abf6a): Kernel trap at 0x00448d3b, type 14=page fault, registers:
    CR0: 0x80010033, CR2: 0x000000ac, CR3: 0x0ee72000, CR4: 0x00000660
    EAX: 0x00000001, EBX: 0x00000000, ECX: 0x00000000, EDX: 0x05fc66e0
    CR2: 0x000000ac, EBP: 0x01003be8, ESI: 0x01003ccc, EDI: 0x05fc66e0
    EFL: 0x00010297, EIP: 0x00448d3b, CS:  0x00000008, DS:  0x00000010
    Error code: 0x00000000
    Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
    0x1003978 : 0x21b837 (0x5dd7fc 0x10039ac 0x223ce1 0x0)
    0x10039c8 : 0x2abf6a (0x59e3d0 0x448d3b 0xe 0x59e59a)
    0x1003aa8 : 0x2a1a78 (0x1003ac0 0xb 0x1003be8 0x448d3b)
    0x1003ab8 : 0x448d3b (0xe 0x48 0x1700010 0x10)
    0x1003be8 : 0x2fd111 (0x1003c0c 0x246 0x1003c28 0x2dfc1c)
    0x1003c38 : 0x2fea67 (0x5fd51ec 0x1003ccc 0x5d3ee94 0x4866f3)
    0x1003c88 : 0x2f4780 (0x5fd51ec 0x1003ccc 0x5d3ee94 0x0)
    0x1003dc8 : 0x4740f2 (0x5fd51ec 0x1003ebc 0x0 0x1)
    0x1003f48 : 0x4744b8 (0x680ab0 0x1 0x0 0x0)
    0x1003f78 : 0x4f82fb (0x5d1b2a0 0x5d53888 0x5d3edd4 0x1)
    0x1003fc8 : 0x2a251d (0x5d53884 0x0 0x10 0x0)
    BSD process name corresponding to current thread: syslogd
    Mac OS version:
    10K549
    Kernel version:
    Darwin Kernel Version 10.8.0: Tue Jun  7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
    System model name: MacBookPro5,5 (Mac-F2268AC8)
    System uptime in nanoseconds: 6245617488378
    unloaded kexts:
    com.apple.driver.AirPortBrcm43xx          423.91.27 (addr 0xf0c000, size 0x1900544) - last unloaded 130764674716
    loaded kexts:
    com.Cycling74.driver.Soundflower          1.5.2
    com.apple.driver.AppleHWSensor          1.9.3d0 - last loaded 32021797050
    com.apple.driver.AGPM          100.12.31
    com.apple.driver.AppleMikeyHIDDriver          1.2.0
    com.apple.driver.AppleHDA          2.0.5f14
    com.apple.driver.AppleUpstreamUserClient          3.5.7
    com.apple.driver.AppleMCCSControl          1.0.20
    com.apple.driver.AppleMikeyDriver          2.0.5f14
    com.apple.driver.AudioAUUC          1.57
    com.apple.filesystems.autofs          2.1.0
    com.apple.driver.AppleBacklight          170.0.46
    com.apple.driver.SMCMotionSensor          3.0.1d

  • HUGE App store problem, please help!!

    Hello
    I had an iphone 3g for a few months about a year ago. During that period, i purchased quite a lot of apps and games from the app store. Last year i sold it, and today i just got a 3GS.
    My problem is, although i HAVE authorised the computer and signed in, i can't find my downloaded application. I remembered some of them, but apparently i can't download them but only buy them (AGAIN).
    Can anyone help me with this problem? How do i get my already payed for apps back? I AM using the same account.
    10x

    As long as you are using the same iTunes account, you can download the apps again for free. This explains how to do that: http://support.apple.com/kb/HT2519
    You can use the iTunes > Store > View My Account to go to your account's purchase history to see what you bought.

  • Monitor Problem please help!

    Hello everybody.
    I have bought my first macbook pro mid2012 (non retina) before 2 months. one day i spilled some juice on it unfortunately. everything seen to working fine with the except of the keyboard that was need to be replaced. i found a keyboard on the market and i replace it. the macbook was working fine after replacement but i was having some problems with microphone so i decided to reopen the macbook to check the microphone cable. after that the monitor was black!!! i saw deeply inside monitor and seems some problem with the light (inverter in pcs). i told to myself that i didnt properly connect the lvds cable so i reopen for last time the macbook to check but after my last try the monitor was tottaly black??? i can work with my macbook pro in external monitor and all are fine only the monitor is black (no signal no light). i went to a friend that fixes electronic and saw that a capacitor near lvds cable was run out ( this capacitor send power to monitor) and he fix it but after this again no signal no light. i thinkin that i need to change the screen ??? could anybody tell me some ideas. im really sorry for my bad english. My model is Md101 mid2012 core i5 non retina..

    If you are running Mavericks, you probably want to un-check "Displays have separate Spaces" in System Preferences > Mission Control.

  • P6N Lots of problems please help

    P6N Lots of problems please help
    The setup is the following:
    P4 D935 3.2gHz
    P6N Diamond MS-7320 Bios 1.3V
    Corsair XMS2-6400C4DHX
    NX8600GT-TD512EZ/D2
    Seagate Barracuda 7200 250Gb SataII 16Mb
    Akasa 460W Dual Rail
    Please help I have lots and lots of problems with lockups that can happen any time post , bios , loading vista and sometimes during OS. Some times will work ok play games etc. Already tried different combinations fitting the mem modules even tried and some pc4200 modules same problems. Spent lots of hours clocking the mems with different settings but non is stable. I am not interested in overcloking just to make it stable to start with. When is actually running is fine is more than enough for me. Already looked to lots of posts on the msi forum but… Since the cpu is old can I go back on an older bios version???? The Corsair modules have to run at 2.1V or is it possible to use them with slower setting. So confused so lost ….. please HELLPPPPP
    Any help greatly appreciated.

    please, don't buy any more unneded parts.  first find the problem then buy if no solutions available.
    One thing I find with BIOS issues is to do a full clear.
    1. disconnect the power cord from the power supply(turn switch to off if there is one.
    2. hit the power switch to clear the power out of the system.
    3. set the cmos jumper to clear and leave there if one is available.
    4. Pull the battery.
    5. carefully short out the battery connector on the motherboard to drain any power left.
    6. press the clear cmos button and hold for 30sec minimum, if you didn't have a jumper to set. 
    7. replace battery, move jumper back, plug in power cord, turn on power sipply switch.
    Now it should hopefully power up.  go into BIOS and load optimized results. hit save and exit and when it gets back to the post screen, go back into bios and set your normal MB settings(ie. set boot devices, boot order, disable sound if using sound card, etc...)
    go into your H/W Monitor section and list the CPU Vcore settings to make sure it is getting the power it needs.  I just looked it up and it's suppose to run from 1.225v - 1.325v.
    also, try your most generic ram you have with auto settings.  the faster the ram usually the more volts they need and default volts are 1.8v for ram and sometimes faster chips have issues with lower volts.
    Let me know how this works for you.
    -=Mark=-
    ps. make sure everything is unplugged from the computer you don't need.  just cpu, 1 stick of ram, and video. and of course keyboad and mouse.  Please make a signature with all your systems specs including make and model numbers.  I hate guessing at solutions and I'd hate to see you buy any more unneccessary parts because of lack of information.

  • M93p dual monitor problems; monitor turns off and cannot be turned on again

    Hi,
    we have multiple M93p tiny computers causing problems in dual monitor setup (VGA / Displayport->DVI). Our users (already >5)  keep telling us, they leave their workplace, return, then DVI attached monitor if off and they do not find a way to turn it on. This is true; the only workaround that has been found by our users is to bring Win7/32bit into standby mode and awaking it again.
    Needless to say, we turned all windows energy saving options off (computer standby/hibernate, monitor turn off). Still the problem appears.
    Maybe there is something wrong with DVI power/DVI signal?
    - Monitor independent, as far as I can see
    - Independent from Windows energy saving modes
    - BIOS updates did not help
    [todo]: Try Intel/(AMD?) drivers, let users test.
    I haven't seen exactly when the monitor turns off because it is reported by users. I had a testing machine, but was not able to reproduce.
    http://forums.lenovo.com/t5/A-M-and-Edge-Series-Th​inkCentre/Dual-monitors-problem-VGA-and-Displaypor​... is related.
    Anyone?
    Thx

    Make a "Genius" appointment at an Apple Store to have the machine tested.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
    Keeping your confidential data secure during hardware repair
    *An SSD doesn't need to be zeroed.

  • My iphone is on recovery mode and i can´t turn on it, when i try to recover it from itunes i get: "unknown error (36), i´ve tried to do lot of things but i can´t  solve my problem. please help!!

    my iphone is on recovery mode and i can´t turn on it, when i try to recover it from itunes i get: unknown error (36), i´ve tried to do lot of things but i can´t solve my problem. please help!!

    Hi, i had the same problem. Try to find the file "apple" or "itunes" don't know it anymore exactly. Ahm well you need to delet any information or just plug in your iphone into an other computer. important is that your iphone never has been pluged in this computer before. This was what i did, and it worked!

  • Problem Please help me.....Let me know the area to look for it I am a DBA..

    Problem Please help me.....Let me know the area to look for it I am a DBA..Thanks in advance to let me know the cause and the area to look and fix it...
    Server Error in '/' Application.
    Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
    Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
    Exception Details: System.Web.Services.Protocols.SoapException: Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
    Source Error:
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. 
    Stack Trace:
    [SoapException: Problem with SAP/BAPI.
    SAP.Connector.RfcCommunicationException: Connect to message server failed
    Connect_PM  MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD
    LOCATION    CPIC (TCP/IP) on local host
    ERROR       service 'sapmsPRD' unknown
    TIME        Wed May 04 08:59:06 2005
    RELEASE     620
    COMPONENT   NI (network interface)
    VERSION     36
    RC          -3
    MODULE      ninti.c
    LINE        428
    DETAIL      NiPServToNo
    SYSTEM CALL getservbyname
    COUNTER     1
       at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode)
       at SAP.Connector.SAPConnection.Open()
       at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn)
       at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
       at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type)
       at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)]
       System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1503
       System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +218
       SoftwareKeyUI.InstalledBaseDataWS.InstalledBaseData.LoadKPIRegionMulti(DataSet products)
       SoftwareKeyUI.InstalledBaseDataAccess.LoadKPIRegionMulti(DataSet products)
       SoftwareKeyUI.InstalledBase.GetRegionDetails(Int32 userId, String product, String regionType)
       SoftwareKeyUI.FilteredAccess.GetRegionDetails(Int32 userId, String product, String regionType)
       SoftwareKeyUI.search.LoadRegionDetails()
       SoftwareKeyUI.search.regionType_SelectedIndexChanged(Object sender, EventArgs e)
       System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e) +108
       System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +26
       System.Web.UI.Page.RaiseChangedEvents() +115
       System.Web.UI.Page.ProcessRequestMain() +1099

    The error is a very basic one - the sapmsPRD service is not known. You will have to go to <NT_ROOT>\system32\drivers\etc and add the entry sapmsPRD 3600 to this file.
    This is basically telling the requester at what port to look for the message server.
    C

  • Problem Please help me.....Let me know the area to look for it

    Problem Please help me.....Let me know the area to look for it I am a DBA..Thanks in advance to let me know the cause and the area to look and fix it...
    Server Error in '/' Application.
    Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable&amp; Kpi_Regions, ZSOFT_PROD_TYPETable&amp; Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
    Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
    Exception Details: System.Web.Services.Protocols.SoapException: Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable&amp; Kpi_Regions, ZSOFT_PROD_TYPETable&amp; Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
    Source Error:
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
    Stack Trace:
    [SoapException: Problem with SAP/BAPI.
    SAP.Connector.RfcCommunicationException: Connect to message server failed
    Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD
    LOCATION CPIC (TCP/IP) on local host
    ERROR service 'sapmsPRD' unknown
    TIME Wed May 04 08:59:06 2005
    RELEASE 620
    COMPONENT NI (network interface)
    VERSION 36
    RC -3
    MODULE ninti.c
    LINE 428
    DETAIL NiPServToNo
    SYSTEM CALL getservbyname
    COUNTER 1
    at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode)
    at SAP.Connector.SAPConnection.Open()
    at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn)
    at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
    at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable&amp; Kpi_Regions, ZSOFT_PROD_TYPETable&amp; Prod_Type)
    at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)]
    System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1503
    System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +218
    SoftwareKeyUI.InstalledBaseDataWS.InstalledBaseData.LoadKPIRegionMulti(DataSet products)
    SoftwareKeyUI.InstalledBaseDataAccess.LoadKPIRegionMulti(DataSet products)
    SoftwareKeyUI.InstalledBase.GetRegionDetails(Int32 userId, String product, String regionType)
    SoftwareKeyUI.FilteredAccess.GetRegionDetails(Int32 userId, String product, String regionType)
    SoftwareKeyUI.search.LoadRegionDetails()
    SoftwareKeyUI.search.regionType_SelectedIndexChanged(Object sender, EventArgs e)
    System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e) +108
    System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +26
    System.Web.UI.Page.RaiseChangedEvents() +115
    System.Web.UI.Page.ProcessRequestMain() +1099

    Hi
    You should make a mapping for the service sapmsPRD in your /etc/services file (On Windows: C:WINDOWSSYSTEM32DRIVERSETCservices). If your instance number is 00 you will have to add the following entry:
    sapmsPRD      3600/tcp
    Good luck!
    René van Es

  • [TV@Master] Problem please help

    I have Msi.mother board PT8-Neo -LSR ,  Model No.Ms-6799 , main board bios -Phonenix ,maind board version i updat it to 2.2 , cpu size 2.4 G celleron D/256/533 , memory size 256DDram (400),display card Nvidia Riva TNT2 model 64
    the problem that i face it when i put my TV@nywhere -master card ,the pc stop at the main page that show the biso version and name of bios company and the letters do not bost well it look like a virus work , and when i take tha card off the pc go normally , i tried put it to other PCI the same problem
    please help

    i meany by fix the problem of getting the pc go on to windows with card on PCI salot but i still have the broblem of the driver
    please read my reply again
    my operating system is win me and i have also another pc have XP
    when i log in to windows the system show that found my TV@nywhere card but it didnt took the installatin driver for it i tried to install the driver directly
    but it give me this 2 mesages  when i try to install the driver
    MSI TV card is not found ,stop the installation
    the other message is
    MSI pvs driver installatin failed
    i download the driver from msi page also give me the same messages
    for known on Device Manager it show me that the driver there but do not have the driver and the ? mark beside them
    what to do now 

  • I want to buy an in-app purchase but i don`t remember my security questions and i cant access my recovery email either, what can i do? i have 100$ on my account and cant use it because of that problem, please help URGENT

    I want to buy an in-app purchase but i don`t remember my security questions and i cant access my recovery email either, what can i do? i have 100$ on my account and cant use it because of that problem, please help URGENT

    If you have a rescue email address on your account then you can use that - follow steps 1 to 5 half-way down this page will give you a reset link on your account : http://support.apple.com/kb/HT5312
    If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact Support in your country to get the questions reset : http://support.apple.com/kb/HT5699

  • I'm in trouble, my iPod Touch is giving 4th shock when recharge and the battery does not last any more. who knows or has a similar problem, please help me. Note: all this after I downloaded the new version OS5.

    I'm in trouble, my iPod Touch is giving 4th shock when recharge and the battery does not last any more. who knows or has a similar problem, please help me. Note: all this after I downloaded the new version OS5.

    I would make an appointment at the Genius Bar of an Apple store because of the shock issue. I doubt it was caused by the update.

  • My iphone 4 is acting like crap right i can't even restore it everytime i try to reboot it my iphone freezes at the apple logo it is ******* to the point where i just want to smash it how do i solve this problem please help?

    my iphone 4 is acting like crap right i can't even restore it everytime i try to reboot it my iphone freezes at the apple logo it is ******* me off to the point where i just want to smash it how do i solve this problem please help?

    Don't worry, just follow these steps to fix iPhone stuck on Apple logo
    => First of all Start your Computer and then connect with Internet connection, now Download the latest version of the iTunes application
    => Now install the iTunes application in your System and connect your Device with computer via Data cable
    => Now connect your Device with iTunes application and then Tab on summary option, see in the left side bar of iTunes
    => Now Select restore option from iTunes and then confirm the Restore Message for better results. After this unplug your Device and Restart it
    I hope that will surely
    Thank you...

  • Hello!i have problem to insttal potoshop cs6 this is,we've encountered the following issues.installer failed to initialize.this could be due to a missing file.please download adobe support advisor to detected the problem.please,help me

    this is,we've encountered the following issues.
    installer failed to initialize.this could be due to a missing file.please download adobe support advisor to detected the problem.
    please,help me!

    Hi there Mylenium, is there any way you can help me? My cs6 is doing all kinds weird things lately. The liquifying too stopped working completely, when I try to work with the actions, it starts flickering and changing opacity in color by itself. It starts flickering and is completely out of whack! I tried uninstalling and reinstalling and still no luck. I tried getting in touch with adobe and no luck with that neither! Is there anyway you might be able to help?

Maybe you are looking for