Huge file in JOBLG directory

Dear experts,
We found abnormal huge file in /sapmnt/BWP/global/010JOBLG directory on our BI system:
-rw-rw---- 1 bwpadm sapsys 503111680 Mar 24 07:41 .nfsB12D
Do you know what is the origin of the file?
Thank you in advance!
Regards
Vladimir

Hi,
It looks like a job log file which the system (bwpadm sapsys ) has generated. Please check the jonb log SM37 for the job which has run at the time when the file has been generated.
Thanks...
Shambhu

Similar Messages

Unable to process huge files in SFTP BASED PROXY SERVICE

Hi,
I credted osb project which will have sftp based proxy and sftp based business service.After completing the development i tested the fie transfer through WINSCP ,but my sftp based proxy was picking the files but i am unable to see the files in the output directory for huge files,for small file it is coming after aquite long time .please assist me .

If you enable content streaming then you cant access the file/message content within the Proxy service and can not perform actions like Replace or perform transformations on the content. Use streaming for pass through scenarios only. If you want to read a large file and also perform transformations on content I would recommend using JCA Adapter for FTP and try reading records from file in batches, a few records at a time. Just so we know the requirement better, what is the file size and what is the format of the content?

File Adapter-Problem Reading Huge Files

Hi,
Here is the issue that i am facing
When reading huge file(csv file upto 6MB-8MB) the communication channel configured as File Adapter with a polling interval of 7 min(420 sec) is inconsistent in reading the complete file.Sometimes it reads the the complete file of 6 MB and sometimes it reads a part of the file say 3MB/6MB.Can this inconsistent behaviour be resolved.??
Your suggestions highly appreciated.
Regards
Pradeep

Hi Pradeep !
8mb is not a huge file for XI, I think it is a small one. Maybe your problem is not the size..please check if XI is not starting to read the file before it is completely written to the source folder. If you are creating that csv file from another application directly to the poll source directory of the XI scenario specified in the file adapter, and your poll interval is small, XI could start reading the file while you are still writing it. If this is the case, try to put the file with a different extension or filename than the specified in file adapter comm channel and when the file is completely written, rename it to its final filename and check if you are still having that misbehavior.
You can write the file to a temp directory and the move it to the XI directory once finished.
Regards,
Matias.

Error in sender file adapter: source directory does not exist

Hi,
The PI system is 7.11
I've created sender file adapter with following details:
Transport Protocol : File System
Source directory: /interfaces/In
I checked in AL11 that this path really exists and it does. (I can even see the .txt file that should be processed.)
But still i get in Communication Channel Monitoring the following error:
"Configured Source directory "/interfaces/In" does not exist.
(i also tried to give the source directory as "interfaces/In" and as "//interfaces/In" but still the same error.
Any suggestions as to what is wrong?
kr
Robert

Actually, Need to use forward slash (/) to separate directory names in accordance with the Java specification.
But wanted to try if that works..
Also check directory name , path again as this is case sensitive...
--Divyesh

File to dinamic directory

Hi all.
i have an XML that contain:
FILE:Sales.xml
Directory:c:\new folder
Name: Rodrigo
LastName: Suarez
Age: 21
I must map it to an another File to c:\new folder\Sales.xml
my problem is File and Directory is dinamic--> Directory an File can change
Any Idea How can i do it??
Thanks & Regads
Rodrigo

hi Jin
im trayin do a UDF enconding, but in dont know how to do that. I Created a User Function.
Imports: com.sap.aii.mapping.api.DynamicConfigurationKey;com.sap.aii.mapping.api.DynamicConfiguration;
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey keyF = DynamicConfigurationKey.create( URLFile, "FileName");
DynamicConfigurationKey keyD = DynamicConfigurationKey.create( URLFile, "Directory");
String valueOld = conf.get(keyF);
String valueOldD = conf.get(keyD);
if (valueOld != null) {
    String valueNew = valueOld.replaceAll("Sender.xml",file);
    conf.put(keyF, valueNew);
if (valueOldD != null) {
    String valueNewD = valueOldD.replaceAll("/IN",dir);
    conf.put(keyD, valueNewD);
return name;
URLFile: http://sap.com/xi/XI/System/File.
I dont know if the logic of function is right.
I made a Test in XI and the result was this:
Compilation of dynamic_directory_MM successful Exception:[java.lang.NullPointerException] in class com.sap.xi.tf._dynamic_directory_MM_ method FileCOutput$[http://sap.com/xi/XI/System/File, Sales.xml, c:/, Rodrigo, com.sap.aii.mappingtool.tf3.rt.Context@9159fe] com.sap.aii.utilxi.misc.api.BaseRuntimeException: Exception:[java.lang.NullPointerException] in class com.sap.xi.tf._dynamic_directory_MM_ method FileCOutput$[http://sap.com/xi/XI/System/File, Sales.xml, c:/, Rodrigo, com.sap.aii.mappingtool.tf3.rt.Context@9159fe]
Regards
RP

How do i delete Older files from the directory before create a new file?

Hi,
How do i delete older files in a particular directory,
the senorio is count the number of .txt files in a directory and delete the older files if file count is more than 10. (if i add 11th file the very first file has to be deleted)
i have written the code to count the files and delete , but it is deleting all the files instead of older file
public class ExtensionFilter implements FilenameFilter {
private String extension;
public ExtensionFilter( String extension ) {
    this.extension = extension;
public boolean accept(File dir, String name) {
    return (name.endsWith(extension));
public class FileUtils{
public static void main(String args[]) throws Exception {
    FileUtils.deleteFiles("c:/countfile/", ".txt");
public static void deleteFiles( String directory, String extension ) {
    ExtensionFilter filter = new ExtensionFilter(extension);
    File dir = new File(directory);
    String[] list = dir.list(filter);
    File file;
    if (list.length == 0) return;
    for (int i = 0; i < list.length; i++) {
      //file = new File(directory + list);
file = new File(directory, list[i]);
if ((list[i]).length()>=10)
     System.out.print(file + " deleted : " + file.delete());
Thanks,
Jamin Rosina

What your code is doing now, is deleting all filenames that are longer than 10 characters.
Your problem lies in the line:
if ((list).length()>=10)

Anyone knows how to delete a file from a directory?????

hi there
anyone has any idea on how to delete a file from a directory? delete(String filename)? thank you.

Hi,
Check this link.
Gives you an example code to show how to delete a file.
http://examples.oreilly.com/jenut/Delete.java
Hope this helps.
Roopasri Vittal
Developer Technical Support
Sun Microsystems
http://sun.com/developers/support

How do I delete a file from a directory

I want to delete the file I have finished processing in the c:\upload directory but the f.delete() command is not working. Am I using this command correctly?
The f.delete() is after I copy the file to an archive directory.
Program:
import java.io.*;
import java.util.*;
import java.text.*;
import java.sql.*;
public class ReadSource {
public static void main(String[] args) throws Exception {
     StringTokenizer st1;
          String val1, val3, val4, val5, val9, val10, val11, val12, val13, val14, val16;
          String val2, val6, val7, val8, val15, val17, val18, val19, val20;
          int cnt;
          File f = new File("C://upload" );
          FileWriter outFile = new FileWriter("C://RIFIS/log/logfile.txt", true);
          String filetext = "Starting RIFIS Upload";
          java.util.Date d = new java.util.Date();
          SimpleDateFormat form = new SimpleDateFormat("dd/MMM/yyyy hh:mm:ss");
          String dateString = form.format(d);
     try {
          Class.forName("oracle.jdbc.driver.OracleDriver").newInstance();
Connection conn = DriverManager.getConnection("jdbc:oracle:thin:@xxxxx.xxxx.xxx:1521:xx","xxxxxx","xxxx");
                    Statement st = conn.createStatement();
                    outFile.write(System.getProperty("line.separator"));
                    outFile.write(filetext+" - "+dateString);
                    if (f.isDirectory())
                    { String [] s = f.list();
                    for (int i=0; i<s.length; i++)
                    { outFile.write(System.getProperty("line.separator"));
                         outFile.write("Found file - "+f+"/"+s);
          FileReader file = new FileReader(f+"/"+s[i]);
                              File inputFile = new File(f+"/"+s[i]);
                              File outputFile = new File("C://RIFIS/archive/"+s[i]);
                    BufferedReader buff = new BufferedReader(file);
                    boolean eof = false;
                    String val0="";
                    ResultSet rec = st.executeQuery("SELECT landings_hold_batch_seq.nextval FROM dual");
                    while(rec.next())
                    { val0 = rec.getString(1); }
                              cnt=0;
                    while (!eof)
                    { String line = buff.readLine();
                         if (line == null)
                         { eof = true; }
                         else
                         { //System.out.println(line);
                                   cnt = cnt+1;
                              st1 = new StringTokenizer(line,",");
                                   val1 = st1.nextToken();
                                   val2 = st1.nextToken();
                                   val3 = st1.nextToken();
                                   val4 = st1.nextToken();
                                   val5 = st1.nextToken();
                                   val6 = st1.nextToken();
                                   val7 = st1.nextToken();
                                   val8 = st1.nextToken();
                                   val9 = st1.nextToken();
                                   val10 = st1.nextToken();
                                   val11 = st1.nextToken();
                                   val12 = st1.nextToken();
                                   val13 = st1.nextToken();
                                   val14 = st1.nextToken();
                                   val15 = st1.nextToken();
                                   val16 = st1.nextToken();
                                   val17 = st1.nextToken();
                                        val18 = st1.nextToken();
                                        val19 = st1.nextToken();
                                        val20 = st1.nextToken();
                                   /*System.out.println("Token 0: " + val0);
                              System.out.println("Token 1: " + val1);
                              System.out.println("Token 2: " + val2);
                                   System.out.println("Token 3: " + val3);
                                   System.out.println("Token 4: " + val4);
                                   System.out.println("Token 5: " + val5);
                                   System.out.println("Token 6: " + val6);
                                   System.out.println("Token 7: " + val7);
                                   System.out.println("Token 8: " + val8);
                                   System.out.println("Token 9: " + val9);
                                   System.out.println("Token 10: " + val10);
                                   System.out.println("Token 11: " + val11);
                                   System.out.println("Token 12: " + val12);
                                   System.out.println("Token 13: " + val13);
                                   System.out.println("Token 14: " + val14);
                                   System.out.println("Token 15: " + val15);
                                   System.out.println("Token 16: " + val16);
                                   System.out.println("Token 17: " + val17);
                                        System.out.println("Token 18: " + val18);
                                        System.out.println("Token 19: " + val19);
                                        System.out.println("Token 20: " + val20);*/
                                   st.executeUpdate("INSERT INTO LANDINGS_HOLD (lh_id, lh_batch, supplier_dr_id, supplier_unique_id, supplier_dealer_id, supplier_cf_id, supplier_vessel_id, unload_year, unload_month, unload_day, state_code, county_code, port_code, itis_code, market, grade, reported_quantity, unit_measure, dollars, lh_loaddt, lh_loadlive, purch_year, purch_month, purch_day)" +
                    "VALUES (0,'"+val0+"','"+val1+"',"+val2+",'"+val3+"','"+val4+"','"+val5+"',"+val6+","+val7+","+val8+",'"+val9+"','"+val10+"','"+val11+"','"+val12+"','"+val13+"','"+val14+"',"+val15+",'"+val16+"',"+val17+",SYSDATE,NULL,"+val18+","+val19+","+val20+")");
                         FileReader in = new FileReader(inputFile);
                         FileWriter out = new FileWriter(outputFile);
int c;
                         while ((c = in.read()) != -1)
                         { out.write((char)c); }
                         in.close();
                         out.close();
                         outFile.write(System.getProperty("line.separator"));
                         outFile.write("Number of records inserted - "+cnt);
                         outFile.write(System.getProperty("line.separator"));
                         outFile.write("Copied upload file to archive directory");
                         f.delete(); // delete the upload file
                         outFile.write(System.getProperty("line.separator"));
                         outFile.write(f+"/"+s[i]+" - Has been removed from upload directory");
                         buff.close();
                    outFile.write(System.getProperty("line.separator"));
                    outFile.write("Upload Complete...NO ERRORS");
                    outFile.write(System.getProperty("line.separator"));
                    outFile.write("*************************************************************");
                    outFile.write(System.getProperty("line.separator"));
                    //outFile.flush();
          //outFile.close();
                    conn.close();
                    else
                    { outFile.write("No files to process"); }
          catch(Exception e)
               { outFile.write(System.getProperty("line.separator"));
               outFile.write("ALERT....ALERT....ALERT");
                    outFile.write(System.getProperty("line.separator"));
                    outFile.write("Error Occurred in ReadSource.java - RIFIS Upload");
                    outFile.write(System.getProperty("line.separator"));
               outFile.write("My Error: " + e);
                    outFile.write(System.getProperty("line.separator"));
                    outFile.write("*************************************************************");
               outFile.flush();
          outFile.close();

Gave it a try but file c:\upload\DS121002.csv did not go away. Here is the location of my delete command:
st.executeUpdate("INSERT INTO LANDINGS_HOLD (lh_id, lh_batch, supplier_dr_id, supplier_unique_id, supplier_dealer_id, supplier_cf_id, supplier_vessel_id, unload_year, unload_month, unload_day, state_code, county_code, port_code, itis_code, market, grade, reported_quantity, unit_measure, dollars, lh_loaddt, lh_loadlive, purch_year, purch_month, purch_day)" +
                    "VALUES (0,'"+val0+"','"+val1+"',"+val2+",'"+val3+"','"+val4+"','"+val5+"',"+val6+","+val7+","+val8+",'"+val9+"','"+val10+"','"+val11+"','"+val12+"','"+val13+"','"+val14+"',"+val15+",'"+val16+"',"+val17+",SYSDATE,NULL,"+val18+","+val19+","+val20+")");
                         FileReader in = new FileReader(inputFile);
                         FileWriter out = new FileWriter(outputFile);
int c;
                         while ((c = in.read()) != -1)
                         { out.write((char)c); }
                         in.close();
                         out.close();
                         inputFile.delete();
                         outFile.write(System.getProperty("line.separator"));
............

Java Program to copy file from one directory to another failing

Hello All,
Oracle Applications 12.1.3
RDBMS: 11.2.0.30
SQL*Plus: 10.1.0.5.0
Java beginner here so help is much appreciated. I'm have some java code that I'm using to copy a file from one directory to another in an Oracle Applications Server. I notice that when moving to a new instnace I started to get file not found errors. I think it's because of the directory. My question is, does the directory in which I trying to pick up the file have to be a DBA_DIRECTORY, or a UTL_FILE directory in order for the java to find the file and move it?
Here is my code...
CREATE OR REPLACE AND COMPILE JAVA SOURCE NAMED "COPY_FILE_JVS" AS
import java.io.*;
public class COPY_FILE_JVC{
public static void copy(String SourceFile, String DestDir) {
    File source = new File(SourceFile);
    File dest = new File(DestDir);
    File cpDestFile = null;
    try {
      if (dest.isDirectory()) {
          if(source.isFile()) {
            System.out.println("File name = " + source.getName());
            System.out.println("File name dest = " + dest.getPath() );
            System.out.println("File name cpDestFile = " + dest.getPath() + File.separator + source.getName());
            cpDestFile = new File(dest.getPath() + File.separator + source.getName());
          else {
            System.out.println("Directory or File Not Found");
            return;
      BufferedInputStream br = new BufferedInputStream (new FileInputStream (source));
      BufferedOutputStream bw = new BufferedOutputStream (new FileOutputStream (cpDestFile));
      int read = 0;
      while((read = br.read()) != -1) {
        //System.out.println((char)read);
        bw.write(read);
      br.close();
      bw.close();
    catch (FileNotFoundException e) {
    e.printStackTrace();
    catch (IOException e) {
    e.printStackTrace();

I get these messages when calling the java from SQL Plus as follows...
serveroutput on size 100000;
dbms_java.set_output(1000000);
MY_PKG.CopyFile('/home/my_user/set_env.sh','/interface/home'); (this is call to oracle pl/sql package which calls the java.)
PL/SQL procedure successfully completed.
Directory or File Not Found
PL/SQL procedure successfully completed.
If I change the directory from /home/my_user/ to any directory that is defined in DBA_DIRECTORIES or is a UTL_FILE directory to program works. Is it perhaps because the java is in a PL/SQL package as seen below? The PL/SQL program runs as the APPS user and I have issued the following the command grant JAVASYSPRIV to APPS.
Here is the PL/SQL Package....
CREATE OR REPLACE PACKAGE BOLINF.MY_PKG AUTHID CURRENT_USER AS
CopyFile(p_SourceFile IN VARCHAR2, p_DestDir IN VARCHAR2);
+++++++++++++++++++++++++++++
CREATE OR REPLACE PACKAGE BODY BOLINF.MY_PKG is
CopyFile(p_SourceFile IN VARCHAR2, p_DestDir IN VARCHAR2)
AS LANGUAGE JAVA NAME 'COPY_FILE_JVC.copy(java.lang.String, java.lang.String)';

How to open and read many files from a directory and store contents in 2D array?

I want to make a VI that opens and reads the data from various files contained in a directory (200 files each with 2 columns) and store these in a single 2D array. For file number 1 I want to store the data from both columns in the 2D array, but for files 2 to 200 I only want to store the second column of each file. Can someone please help?

Hi Nadav,
Thanks for your help. I have followed your instructions but i cannot get it to work. I used the LIST DIRECTORY to list the files in the directory - that works. However, how do I read each of the 200 files using READ FROM SPREADSHEET FILE without me having to manually select each of the 200 files? So, if I use LIST DIRECTORY to list all 200 files in an array, how do I get each of these to open and store the data in a 2D array? Here is what I have done (File called read_files.VI) Could you please help me? Thank you very much in advance.
Attachments:
read_files.vi ‏18 KB

Open file from a directory that is not web accessible?

Subject says it all really, I'd like users to be able to download files from a directory that is otherwise not accessible by the browser. There is a way to do this is PHP, the readfile() function. Is there something equivalent in Java?
Thanks!

You can do that with a Servlet and a shot of java.io API.
Here's an example: [http://balusc.blogspot.com/2007/07/fileservlet.html].

Script to open all PST files in a directory and open with Outlook.

Hi! I am looking for a script that opens all PST files in a directory, opens it in outlook, and writes to a log to see if it completed correctly. I'm new to VBscript and just want to see how the script would be written.
Thank you!!

Thank you for all the input! JRV, I went through the repository and couldn't find anything about importing into Outlook. I will use it for future references and I appreciate you directing me there.
Grant, I need to be able to locate all PST files within a directory, not point it to a specific pst. I also need it written to a log file. Here is what I have...Don't laugh, I'm very new...
const ForAppending = 8
set objTextFile = objFSO.OpenTextFile ("C:\Users\jimmy.nguyen\Desktop\Lucky.txt", ForAppending, True)
set objFSO = CreateObject("Scripting.FileSystemObject")
Set objShell = CreateObject("WScript.Shell")
strCommand = "C:\Program Files (x86)\Microsoft Office\Office12\outlook.exe"
Set objExecObject = objShell.Exec(strCommand)
wscript.sleep 4000
Set myOlApp = CreateObject("Outlook.Application")
Set myNS = myolapp.GetNamespace("MAPI")
myNS.AddStore "objfile.name"
Sub ShowSubFolders(fFolder)
Set objFolder = objFSO.GetFolder(fFolder.Path)
Set colFiles = objFolder.Files
For Each objFile in colFiles
If UCase(objFSO.GetExtensionName(objFile.name)) = "pst" Then
objFile.Name
End If
Next
For Each Subfolder in fFolder.SubFolders
ShowSubFolders(Subfolder)
Next
End Sub
strResults = ShowSubFolders(fFolder)
objTextFile.WriteLine(strResults)
objTextFile.Close

How do i move a file from one directory to another?

Can anyone help me in moving a file from one directory to another?
The following code just does not work!!
File source_file = new File(source_file);
if(source_file.exists())
File dest_file = new File(destination_file);
if(!dest_file.exists())
boolean moved = source_file.renameTo(dest_file);
System.out.println("moved.."+moved);
The varirable moved is always false.
Can anyone tell me whts wrong in this code?

The problem in your code is you used file object as argument when you create a new File. I changed a little bit codes and it should be fine now.
String source_file1="test111.txt";
String destination_file1="test222.txt";
try{
     File source_file = new File(source_file1);
     if(source_file.exists())
          File dest_file = new File(destination_file1);
          if(!dest_file.exists())
               boolean moved = source_file.renameTo(dest_file);
               System.out.println("moved.."+moved);
catch(Exception e){
           e.printStackTrace();
}

I have had to buy an GRAID 4TB to back up my images as I am a photographer and have huge files. Can I use my old timecapsule 2TB as storage for say 4 years of photography. My imac is getting full.

I am a photographer and have huge files so have had to buy a GRAID 4TB for backup and now have an old 2 TB time capsule not doing anything. Could I use the timecapsule as storage and transfer say a few years of images over to that and free up space on my imac. I do have the images copied onto other hard drives but feel I need more copies in case of external harddrive failure.

Could I use the timecapsule as storage and transfer say a few years of images over to that and free up space on my imac.
Can't give you a definite answer as I don't use a Time capsule, but if it is not being used for anything, why not try it out? My guess is you could use it for miscellaneous storage if you wanted to.

How to get all files in one directory

Hi there,
is there any way to get all the files in one directory?
e.g. a method
File[] getAllFiles(String directory){
Thank you

Just out of interest, which part of the File API was confusing?
http://java.sun.com/j2se/1.5.0/docs/api/index.html
If you look down the left-hand side, you'll see a frame listing "All File". If you select "File" from that list, it opens up the API in the right-hand frame. Quite near the top you'll find "listFiles".
I only ask as this (and other questions easily answered by looking at the API) are frequently asked. Did you overlook it when you read the API or did you just not read it?
I really want to know. I think there is scope to cater for that behaviour within this site. A nice API finder would be good; something more intelligent than the search function (which people use less frequently even than the API docs).

Huge file in JOBLG directory

Similar Messages

Maybe you are looking for