Huge file size when export

Ok so i use Premiere CS3 and when I want to export my video (one single audio track and one image as 'video', total of 5 - 6 minutes) i get a file size of 1.26 GB (!). The imported files have a total size of lower than 10MB. What I do is i export -> movie and choose AVI format. I've tried PAL & NTSC but there is only a slight difference in file size. How is it possible that this exported movie is so big?

when you choose avi format you will see something called " settings" ...when you open that up what do you have selected for your settings ??
when you take a still image which is one little image...with a low byte count....and make it a "video" you are duplicating that little image many times...for example, at 30 frames per second, you are making thirty of those little images for every one second of video time.
If you then multiply 30 of those images (per second) by the total amount of time of the video you get a WAY bigger file size than what you put on the timeline....know what I mean ??
by using some "settings" on the avi file you may be able to "compress" the video a bit more than you currently are...but you will never get the same size file because you are making many frames ( still images) per second and all that adds up to a bigger file

Similar Messages

File Size when Exporting to PDF

Hi!
I have a script that exports InDesign documents to PDF, but when I export it, the file size is too big. The document is a product brochure so there are a lot of images. Is there any way that I can make the file size smaller besides the Image Compression in Adobe PDF Preset? I plan on creating a custom preset. I tried the [Smallest File Size] preset but the quality of the images is not good.
Thanks!

It's unrelated to the script you are using.
This has been discussed over and over in the general forum, but it boils down to:
If you have lots of images, there is no way you can have a small file AND good image quality. One of them has to suffer.
That said, you can inspect and possibly clean up your PDF withAcrobat Pro.
See also
http://forums.adobe.com/message/2598022#2598022
http://forums.adobe.com/message/1290421
http://forums.adobe.com/message/2794972
(a random selection, I should say).

Huge file size when importing clips

When importing clips from my Sony Handycam (HDR TG3E) in HD 1920 X 1080 the file sizes get extremely large. A 10 minute clip results in a filesize (.mov) of approx 8 GB. Is this really meant to be? I use iMovie '08 v. 7.1.4.
Would appreciate any help in adjusting the software or hardware preferences resulting in smaller files.

for editing HiDEf, it gets automtically converted into some 'intermediate' codec, which has ~40-60GBs/h.
on export, these files will get 'shrunk' again..

Large PDF file sizes when exporting from InDesign

Hi,
I was wondering if anyone knew why some PDF file sizes are so large when exporting from ID.
I create black and white user manuals with ID CS3. We post these online, so I try to get the file size down as much as possible.
There is only one .psd image in each manual. The content does not have any photographs, just Illustrator .eps diagrams and line drawings. I am trying to figure out why some PDF file sizes are so large.
Also, why the file sizes are so different.
For example, I have one ID document that is 3MB.
Exporting it at the smallest file size, the PDF file comes out at 2MB.
Then I have another ID document that is 10MB.
Exporting to PDF is 2MB (the same size as the smaller ID document)... this one has many more .eps's in it and a lot more pages.
Then I have another one that the ID size is 8MB and the PDF is 6MBwhy is this one so much larger than the 10MB ID document?
Any ideas on why this is happening and/or how I can reduce the file size.
I've tried adjusting the export compression and other settings but that didn't work.
I also tried to reduce them after the fact in Acrobat to see what would happen, but it doesn't reduce it all that much.
Thanks for any help,
Cathy

> Though, the sizes of the .eps's are only about 100K to 200K in size and they are linked, not embedded.
But they're embedded in the PDF.
> It's just strange though because our marketing department as an 80 page full color catalog that, when exported it is only 5MB. Their ID document uses many very large .tif files. So, I am leaning toward it being an .eps/.ai issue??
Issue implies there's something wrong, but I think this is just the way
it's supposed to work.
Line drawings, while usually fairly compact, cannot be lossy compressed.
The marketing department, though, may compress their very large TIFF
files as much as they like (with a corresponding loss of quality). It's
entirely possible to compress bitmaps to a smaller size than the
drawings those bitmaps were made from. You could test this yourself.
Just open a few of your EPS drawings in Photoshop, save as TIFF, place
in ID, and try various downsampling schemes. If you downsample enough,
you'll get the size of the PDF below a PDF that uses the same graphics
as line drawing EPS files. But you may have to downsample them beyond
recognition...
Kenneth Benson
Pegasus Type, Inc.
www.pegtype.com

Minimising PDF file size when exported form KN on iPad

Hi guys
when exporting KN presentations as PDF's from my iPad is there any way to reduce file size?
I'm working in KN 2.5.1
on an iPad air
With iOS 8.1.1
thanks and appreciate any experience or insight
thanks
martin

There are no quality settings in exporting to PDF on the iPad, these settings are available on the Mac version.

HUGE file sizes when editing with Photoshop CS5

Reluctantly I've set Photoshop CS5 up to process photographs for things like barrel distortion that my 18-200 Nikon seems especially prone to.
I open any given photograph with apple-shift-O, make my changes and save. However, the copy that's then put back into Aperture 3 the file size comes out as anything between 30mb and 70mb per photograph - far too big.
I've tried both TIFF 16-bit) and PNG (16-bit) options in Aperture which makes no difference. I've had a look through Photoshop CS5 options but can't see anything which looks correct.
Thanks

mjw_london wrote:
I can only assume that it's like this because Aperture 3 only basically allows 2 options, to open in an external editor with either TIFF or PSD - both of which are undesirable because of their huge filesizes. Is there a way of making it open in an external editor with JPEG?
Like jade said, it is not ridiculous. Ideally you would be shooting RAW not (lossy) JPEG to start, but even if you do shoot lossy JPEG you should convert to a lossless format like TIFF or PSD for the entire process of any editing. Large file sizes are a good thing not a bad thing because larger sizes represent more image data. And, hard drive capacity is cheap.
Note that JPEG is a lossy compression algorithm, so when you open a JPEG in Aperture, Photoshop, whatever, the file is decompressed and becomes larger. You can again compress the file (such as back to JPEG) when done editing but be aware that each new compression by a lossy algorithm like JPEG loses image data and may also add undesirable visible artifacts.
HTH
-Allen

Too large of a file size when exporting to Quicktime

In '08 when I export my movie to Quicktime the file is quite large, more so than the normal +1 or 2 mb increase from exporting to quicktime results in '06. How do I get back to the smaller file. The file I am exporting right now is 4.5 mb on imovie '08 but turns into a 20mb file after expoting.
Here is what I am doing. Exporting the imovie to quickime for streaming purposes on my website. I use 'export to quicktime' under share and then choose 'Movie to Quicktime Movie' in the 'Save Exported File As and I adjust the 'options' with these settings:
compression: H.264
Quality: Low
Key Frame Rate: 24
Frame Rendering: yes
Encoding mode: multi-pass
Dimension: 320 x 180
Scale : Letterbox
-I am using 16:9 aspect ratio when I import from my camera to iMovie '08.
-I then upload the quicktime movie to 'Vital Stream Small Business Services' and copy ad paste the link onto the back end of my web site. The final result ended in this when I used '06 http://www.legendsgrouprealty.com/Listings_Details.cfm?PropertyID=30, now with the new movie I made with 08' the movie takes quite a while to 'download/stream'.
Any help would be great, hope I provided enough info.
Thank You.

You have somewhat more control over the size of the output if you use the "Limit data rate to..." option instead of the automatic mode controlled by the quality slider.
You didn't mention the frame rate setting that you are using. Did you leave it at "current"?
The other thing you can do is load up a movie exported from iMovie '06 and one exported from iMovie '08 into Quicktime, then click on Window -> Show Movie Inspector, and compare the values. Make sure everything listed under "Format" is the same, then check the data rate.

Hitting a specific file size when exporting from Flash CS5

I need to export three banners to .swf from flash and they all need to be under 61K. They all use photographs and are 5-7 seconds long each and the dimentions are 300x250 px, 300x600 px & 728x90 px. Is there any way I can put in the specific file size in the program and make it under 61k? I tried using the publish settings and lowering the quality and even at 40% quality the file size only went down 20KB from 147 to 127. If you cannot do that in the program is there any third party programs that can be used to do this? Thanks for your help!

What you should do is set the Publish Settings to generate a size report. That way you will have a detailed listing of what each element of the design contributes to the file weight. I would guess that the images are going to be the heavy hitters, so you might need to use image software to optimize them as much as possible before importing them into Flash.

Reduce Doc Size When Exporting

Is there a way to reduce a page size when exporting from InDesign? I have a 20 x 30 poster want to export at 50% and make the pdf @ 10 x 15. Thanks.

by print to pdf do U mean make a ps file instead of exporting, correct?
Well, here's the thing... the orig question was a generalization of what we are trying to do.
The actual file is 19 pgs of panels that are 20 x 30. We need to make pdfs for the client to look at on screen. The file is huge when we try to make pdfs by exporting... even at the smallest file size and then reduce file in Acrobat. We found that reducing the doc size & making pdf yields a much smaller and more manageable file size, but it takes very long to postscript. We were just trying to avoid that step. Thought for sure the was a way to reduce the output size when exporting.

Huge file size reduced by unlocking

I ended up with a 2.7GB file that consisted of 8 locked tracks that had been locked and unlocked lots of times. I knew that was about ten times the real size. The only way to get rid of whatever was causing the huge file size was to unlock the tracks and Save As Archive which reduced the size to 400MB.
Why did this happen?
Also, is there a detailed manual available that tells you all the tricks about GB? Things like: exactly what does locking a track do (Help is not very informative); and how do Save, Save As and Save As Archive differ in their treatment of purple, orange and other regions. I have had problems saving everything when I backup to an external drive, so I'd like to find out exactly how these Saves work.

Christoph,
Yes I just did that. I saved a copy of the song and then trashed the freeze files that should not have been there. The song played fine, no problem. THe file went from 1.6G to 176M.
I have found this situation in a few other files also.
These are my saving habits when I'm working on a song. I work for a while using "Save". Then after a while I start to save many major changes as "Save as Archive". I always end a session this way. Usually I'm not concerned about disc space. I use "Save as archive" all the time because I would rather have a file with everything I'm using contained within that file. Last year I accidently trashed 10,000 loops and I have since found that "save as archive" is a helpful backup when I'm acting stupid around the trash.
I may be one of the few folks who uses "Save as archive " so often and somehow it seems that every once in a while a hiccup occurs and the freeze files do not erase when the tracks are unlocked.
Since this discovery I have gone thru many other files and found this to be the case every now and then. Some of the files didnt hint at being over stuffed but had a few errant freeze files. Normally I would never go and check a files contents but that one file at 1.6G grabbed my attention
Just thought I would post to see if anyone has this problem.

Huge File Sizes

Quicktime has expanded all my FCP video files. Files that were previously normal size, made over two years ago, have become large files (ie...2.5 gigs turned into 20 gigs) without any processing.
When capturing I'm also experiencing large file sizes when using FCP's default import and export settings.

I am a bit of a novice, and I would like an answer to this question as well, mainly in regards to file size when capturing. After six minutes of capture, I have a 35gb file (at this point I stopped it). Is this normal?

Maintain Server parameters to allow huge file size to pass through XI

Hello SAP Gurus,
i would like to know how can i check this Server parameters in SAP PI Configuration :
u2022 UME Parameters : To look into the pool size and poolmax wait parameters - UME recommended parameters (like: poolmaxsize=50, poolmaxwait=60000)
u2022 Tuning Parameters: To look/define the Message Size Limit u201Clike: EO_MSG_SIZE_LIMIT = 0000100u201D under tuning category
u2022 ICM Parameters: To consider ICM parameters (ex: icm/conn_timeout = 900000. icm/HTTP/max_request_size_KB = 2097152)
This is required for allowing huge file size to pass through XI.
Regards,
Ravi

Hi Michael,
I did the settings you just mentioned in the link.
I got through the First step where the file got processed and 50000 record data got divided into on 50000 idocs.
But when its is posting this in BW system, then the outbound status of the message is " Message has error status on outbound side"
And when i see BW there are no idocs in that system. Is it that the RFC connection between XI and BW had timed out and so it did not got processed at outbound side. Or there is some other setting required ?
Also, when we tried it with 20 K file then the outbound status is also successful.
Please let me know how to resolve this issue .
Regards,
Ravi

Stop images from losing file size when scaled down?

Ive read this tutorial;
http://joedasilva.com/blog/?p=32
and ive just found out that if you scale an image smaller,
the file size is permanently decreased, and enlarging the image
again will make it pixalated. If im working with images and I want
a lot of freedom to play around with the scaling, do I need to
convert them all to grafics?
Is there a setting I can change so that the images are saved
at the display resolution when I export them, but maintain there
full file size when in the document? Is this how illustrator works?
thanks

quote:
Originally posted by:
jdldn
Ive read this tutorial;
http://joedasilva.com/blog/?p=32
and ive just found out that if you scale an image smaller,
the file size is permanently decreased, and enlarging the image
again will make it pixalated. If im working with images and I want
a lot of freedom to play around with the scaling, do I need to
convert them all to grafics?
Is there a setting I can change so that the images are saved
at the display resolution when I export them, but maintain there
full file size when in the document? Is this how illustrator works?
thanks
There is no such a thing as a "grafic." In your Fireworks
document, you can have bitmap objects and vector objects. Bitmap
objects, such a photographs, are rectangular objects with detailed
information, where the color and transparency of each pixel is
specified. Vector objects are mathematical objects, where the shape
is determined by nodes and the color is determined by the fill
type. You cannot convert a bitmap object to a vector object
(although you can sometimes create a vector illustration that
resembles a photograph).
If you are still experimenting with your design, what you can
do is add a layer with your original-sized bitmap objects. Put this
layer at the bottom of your stack and keep it hidden. Then, anytime
you feel a need to refresh an object that you've resized too many
times, copy that object from your originals layer. It may not be a
perfect solution, but it should help you.
I've never had a problem with multiply resizing photos,
myself, because I design my layouts with vector shapes first. Once
I have all my proportions set,
then I add any photos I have. With this worflow, I know what
size to make my photos. Of course, I might change my mind, later,
but my process keeps me on track.

File size on export

I need to know the file size that will be generated when exporting jpegs for web use, as certain sites have restrictions. This is a fairly basic function and is available in Elements.
I currently have to guess a quality setting, export the jpeg, check the file size in Explorer, re-export from LR (reducing quality/pixel limits if the file size is too big) and continue the iterations until I achieve an acceptable size.
This facility should be available for all export file-type options.

I agree, but I think this has to go beyond the file size.
The problem is that if you are exporting more than one jpeg, even with the same number of pixels and quality, the file sizes will be different due to compression.
To make this work, it'd be nice to be able to set a Maximum File Size to Export. Then perhaps a Radio Button to choose between adjusting the size in pixels or adjusting the quality to fit as needed.
Paul Wasserman

I'm no longer able to select the file size when emailing a photo. How can I solve this? iPhone 4S with iOS 7.1.1

I'm no longer able to select the file size when emailing a photo. How can I solve this? iPhone 4S with iOS 7.1.1. Thanks a lot.

Yeah - I tried that, several times; each time I get "iTunes is restoring the software on this iPhone" and after about 30 minutes the screen on the phone lights up again with the same screen I had before. After that ... nothing.

Huge file size when export

Similar Messages

Maybe you are looking for