Huge problem, installation froze

My iTunes 6.0 download froze while it said it was installing Quicktime, so I had to cancel out of it.
Now, iTunes 5.0 won't open, I can't uninstall it because it doesn't show up at add/remove programs (neither does Quicktime) and whenever I try to install iTunes 6.0 again it says:
"1607: Unable to install InstallShield scripting runtime"
Now, maybe this was the wrong thing to do, but since I couldn't uninstall iTunes 5.0 normally, I deleted the iTunes folder from Program Files.
Help! I can't play any music now!

hi Keith!
"1607: Unable to install InstallShield scripting runtime"
Now, maybe this was the wrong thing to do, but since I couldn't uninstall iTunes 5.0 normally, I deleted the iTunes folder from Program Files.
okay, we'd better run the Windows Cleanup utility to try to remove any left-over itunes and QT registry entries. here's a link:
http://support.microsoft.com/kb/290301/
once you've done that, use the complete uninstall instructions given in the following document as a guide to a manual uninstall:
http://docs.info.apple.com/article.html?artnum=93976
then head to Windows Update to make sure you're completely up to date in that regard. if you're running a Windows 2000 box, check to see if the following issue is a problem for you:
b noir, "ATTENTION SSH USERS!" #1, 09:51am Oct 13, 2005 CDT
now let's try another install. download and save to your hard drive a copy of the itunes 6.0 installer. (we'll run the installation from there rather than online.) before starting the install, switch off your antivirus
b and
antispyware.
if you run into the 1607 again, try working through the specific advice on that problem given in this document:
http://docs.info.apple.com/article.html?artnum=93976
(work your way through Scenario One before trying Scenario Two.)
keep us posted on your progress.
love, b

Similar Messages

Pagemaker installation huge problem... Really need help

Good afternoon
I´m here to find an solution to a problem that´s making me mad!
I still have to work with adobe pagemaker (I already starter do work with indesign though) cause i have old works of old clients that i have to open with.
But a few days ago i was trying to open a .pmd file in pagemaker and it won´t work.
So i trryed to open some other files and it did the same thing.
I had no solution and i tryed to reinstall pagemaker7 again, but here is the huge problem.
I uninstall it, and now i can install it again.I put the cd and click install and nothing happens.
I tryed to explore the cd folder to run the set up of pagemaker, and nothing happens too...
If there is someone that could help me i would apreceate...Im really needing it...:(

Well, now you know why so many people say that PageMaker does n
ot work reliably on the newer OSs.
The file is probably damaged and I haven't been near a PM file for some years, but John may be able to help you there.
Extra linefeed kindly provided by the software.

Hi im having huge problems trying to install flash for my mac 10.5 imac, iv gone through the internet and tried all of the solutions, everytime i try to install flash it says cant read the download file, or it just wont install, anybody plz help!

hi im having huge problems trying to install flash for my mac 10.5 imac, iv gone through the internet and tried all of the solutions, everytime i try to install flash it says cant read the download file, or it just wont install, anybody plz help!
iv unistalled flash, iv checked plug ins it just wont work,

It would have been a great help to know precisely what Mac you have, so some of the following may not apply:
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version,10.3.183.23 or later, is for Intel Macs only running Tiger or Leopard, as Adobe no longer support the PPC platform. Version 11.4.402.265 or later is for Snow Leopard onwards.
(If you are running Mavericks: After years of fighting malware and exploits facilitated through Adobe's Flash Player, the company is taking advantage of Apple's new App Sandbox feature to restrict malicious code from running outside of Safari in OS X Mavericks.)
* Unhelpfully, if you want the last version for PPC (G4 or G5) Macs, you need to go here: http://kb2.adobe.com/cps/142/tn_14266.html and scroll down to 'Archived Versions/Older Archives'. Flash Player 10.1.102.64 is the one you download. More information here: http://kb2.adobe.com/cps/838/cpsid_83808.html
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications (including Safari) first before installing. You must also carry out a permission repair after installing anything from Adobe.
After installing, reboot your Mac and relaunch Safari, then in Safari Preferences/Security enable ‘Allow Plugins’. If you are running 10.6.8 or later:
When you have installed the latest version of Flash, relaunch Safari and test.
If you're getting a "blocked plug-in" error, then in System Preferences… ▹ Flash Player ▹ Advanced
click Check Now. Quit and relaunch your browser.
You can also try these illustrated instructions from C F McBlob to perform a full "clean install", which will resolve the "Blocked Plug-in" message when trying to update via the GUI updater from Adobe.
Use the FULL installer for 12.0.0.44: Flash Player 12 (Mac OS X)
And the instructons are here: Snow Leopard Clean Install.pdf
(If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, try the following solution which fools the site into thinking that you are running the version 11.5.502.55:)
Download this http://scriptogr.am/nordkril/post/adobe-flash-11.5-for-powerpc to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.

Huge problem using apple mail while sending email to a group...

Hey - I am quite confused... apple mail has huge problems using groups with about 150 addresses when writing and sending an email... the writing of emails is nearly impossible. Once the group name is inserted in the addressline (address book in iCloud!), apple mail uses nearly 100% CPU and further writing is nearly impossible. When sending such an email, all addresses are suddenly visible - though the box is NOT checked and the addresses should be hidden... what can I do? I use this feature (sending mails to groups) on a daily basis and cannot accept visible addresses...
Greetings and sorry for inconvenient english...
Christof

How about next time you send to the group, cc yourself, or include yourself in the group. Then receive the email on the iphone, you can "reply all" in order to send to the group. If you use an imap account, you can make a new folder, call it something like "groups", and save different group emails there for the next time you need to "reply all".

I am having some huge problems with my colorspace settings. Every time I upload my raw files from my Canon 5D mark II or 6D the pics are perfect in color. That includes the back of my camera, the pic viewer on my macbook pro, and previews. They even look

I am having some huge problems with my colorspace settings. Every time I upload my raw files from my Canon 5D mark II or 6D the pics are perfect in color. That includes the back of my camera, the pic viewer on my macbook pro, and previews. They even look normal when I first open them in photoshop. I will edit, save, and then realize once i've sent it to myself to test the color is WAY off. This only happens in photoshop. I've read some forums and have tried different things, but it seems to be making it worse. PLEASE HELP! Even viewing the saved image on the mac's pic viewer is way off once i've edited in photoshop. I am having to adjust all my colors by emailing myself to test. Its just getting ridiculous.

Check the color space in camera raw, the options are in the link at the bottom of the dialog box. Then when saving make sure you save it to the srgb color space when sending to others. Not all programs understand color space and or will default to srgb. That won't necessarily mean it will be accurate, but it will put it in the ballpark. Using save for web will use the srgb color space.

Problems installation Photoshop Elements 8 on Windows 7

I tried to install Photoshop elements 8 on my Windows 7 computer, but the installation gives a failure after a certain time. A file "...cab" is not working and may be corrupt ( exact failure code I can give, if necesary). Is there any possibility to get this file or the program Photoshop Elements 8 as download file so that I can complete the installation? Thank you in advance for your answers.

Hello,
I just got the same problem already some time ago when I tried to install this programm in my computer. At that time (March 2012) the program crashed my computer, I had to reinstall all the Software completely including system software. The program I purchased in December 2011 from Amazon together with a Reflecta crystal Scan slide scanner as bundle, so I thought it will work.
I will try to install the program from the download link you gave me, in case it does not work, what can I do next without having to buy a newer version?
Regards
Franz-Josef Laven
Date: Tue, 6 Nov 2012 14:57:39 -0700
From: [email protected]
To: [email protected]
Subject: Problems installation Photoshop Elements 8 on Windows 7
Re: Problems installation Photoshop Elements 8 on Windows 7 created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
You can download a fresh copy of the install files by following the directions listed at http://prodesigntools.com/direct-download-links-for-lightroom-3-and-ph otoshop-elements-8.html.
I am curious did you have this installed previously or did you just purchase a copy of Photoshop Elements 8?
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4828039#4828039
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4828039#4828039
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4828039#4828039. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Huge problems using external iSight or DV video camera on my MPB DCD...

Ok, so I am developing some applications that make use of a video camera for motion tracking, and I have run into a huge problem when trying to use any external video camera. I have both an external iSight in great working order (I have tested it on my tower, which is also brand new, but on 10.4 for reasons of other applications not yet supported on 10.5.1) and also a Sony DCR-TRV520 NTSC Digital Handycam. (Once again, works perfectly when plugged in to the tower.) But if I plug either of them in to my MBP, no programs recognize their existence at all, be it iChat, iMovie, or my application. Nothing shows up in system profiler either. I try reboots, I get nothing... the internal iSight constantly takes over or is my only choice in applications.
And before you even ask, yes, my firewire port works, as I can plug my external firewire solo audio interface into it no problems, and no, I don't have any other firewire devices plugged in when trying to get the computer to recognize they are there.
Quick response would be awesome, as I am on a timeline to finish the program development and it is very important that I get this to work, preferably the Sony.

I just read this in their Forum mate ...
Cycling 74 has not yet finished evaluating Mac OS 10.5, aka Leopard.
As with any new OS, you are advised to tread cautiously if you are
considering updating. We are interested in hearing any and all reports
from users, and at some later date we shall publish full details of
our compatibility. Until that time use of our software on Leopard is unsupported.
If you wish to make reports of your experience with Leopard, please send them to support at cycling74 dot com

Anyone get a huge "Problem Report for iDVD" with hundreds of lines of information?

Anyone get a huge "Problem Report for iDVD" with hundreds of lines of information? This happens right before the DVD would be finished burning but instead crashes and leaves the long report your have to scroll down several times to read. I had to take several screen captures of the screen to get the WHOLE report. Here is two:
(If there is another thread on this - just answer the question or refer me to it. I'm past due on a big project. Don't have time to read all 21,000 discussions in the iDVD thread. Be kind. Thanks )

Some things to try first:
1. Disconnect any and all 3rd party devices that didn't ship with your mac directly from apple (both FW and USB included).
2. Restart your mac without any 3rd party devices attached whatsoever. That includes ext. hard drives, blue tooth devices, and any third party memory product/s. Basically, anything that doesn't come directly from apple has to go (at least while troubleshooting).
3. Need you to dispose of the plist for iDvd also. Go to you Home folder, the one that looks like a house > Library > Preferences > com.apple.iDvd.plist and drag and drop this file/s to the trash. Make sure to first quit iDvd prior to disposing of this pref. file/s.
4. Run apple's disc utility and repair permissions. Applicantions > Utilities > Disc Utility > Repair Permissions.
5. Restart your mac yet again, and try iDvd one more time.
6. If it's still at issue then please open iDvd from a separate user account and try your project one more time. If you don't know how to create a separate user account then just come on back and one of will show you how.
Good luck.
Message was edited by: SDMacuser

I have a problem, Installation failed

PLease help this is my problem
Installation Failed
Your installation encountered errors.
The error summary file may help you identify the issue
More troubleshooting tps:
1. Restart your computer.
2. Exit all aplications incluiding startup items, virus checking and firewall software.
3. C.ose this window and launch the installer again to reinstall your aplications
If the problems persist, please contact Customer Support for further assitance.
and the error sumary is
Exit Code: 34
-------------------------------------- Summary --------------------------------------
- 1 fatal error(s), 0 error(s), 0 warning(s)
FATAL: Payload '{0A1E2FE2-B2AD-42F4-9C74-641853FB093A} Photoshop Camera Raw 7 6.2.10.0' information not found in Media_db.

Run the Creative Suite Cleaner Tool and try again. If the issues persist, you need to provide more info - we don't even know what product you are trying to install.
Mylenium

I just bought a brand new iPhone 5s and a huge problem is that when i try to sync my music to my iPhone 5s, under the music tab it says that i can only access my music via iCloud. is there anyway to sync your music from your computer?????

I just bought a brand new iPhone 5s and a huge problem is that when i try to sync my music to my iPhone 5s, under the music tab it says that i can only access my music via iCloud. is there anyway to sync your music from your computer?????

The ! sign before the song means that the actual song is no longer on your computer and/or iTunes library.

Uh oh huge problem please help me!

Ok so long story short, i made a 2nd account, i was on it setting it up etc, i was looking at the recent what i did today, and for some reason i wanted to clear that up because i don't know i just wanted it to be clear i guess because i'm a perfectionist lol idk. ok so anyways, i dragged all that to the trash (i'm an idiot i know, AH i don't even know why i did that but ugh.) so a ton of stuff was then in the trash, including the applications like settings and garageband and a bunch of other stuff.
So then i realize what's now in the garbage and i get it out, put it on the desktop, etc. i click on it on the desktop and some of it opens but not really, because it says i have to reinstall it, or else it just doesn't open at all. so i can't even open the computer settings because that's one of the programs that won't open!!! and i can't use time machine because i just got this computer and hadn't yet set up time machine.
Basically, now i can't open like any of those programs and it's a huge problem. what should i do? i want to just somehow get the computer back to when it came out of the box, like get everything off it, reinstall leopard, and start fresh. how do i do this, or do you have a better idea? oh and also what will happen to my itunes library? how can i keep it the same, because i had spent like hours getting all my songs onto my new computer and getting my iphone to sync with my new computer and making my iphone work officially with my new imac.
Please help me!! oh and please don't be like wow you're stupid why would you throw that away, because i didn't even mean to and i know i'm stupid lol.
please only answer if you can help me! oh and sorry about the bad typing i don't feel like capitalizing since this is so long. thanks! i hope you can help!

You may get more response if you post in the ipod Nano forum.

I have a huge problem with memory usage.

I am having two very huge problems with the amount of memory the game I'm working on is using. The first is that the background image for a part of my game takes up ~45mb of memory, but believe it or not, that's not my worst problem. i'm not worried about that right now.
The really, really big problem does involve that image, though.
Whn I'm done using the image, I can't get the resources it uses to be freed. As a result, the program uses more and more memory every time you go into that area of the game, because the memory used by tha area is just sitting there.
I used Jprofiler to figure out exactly what wasn't getting released, because I do everything I know how to make everything be garbage collected, including setting all the references to the image to null after you leave that area of the game, but nothing worked.
After I leave the area with the huge memory leak and give everything time to garbage collect, the main screen for memory usage shows about 45mb of memory used by 20 or so instances of int[], which is obviously the image.
However, this obscenely huge int array doesn't show up in the heap snapshot, which according to them means there's no reference to it or the image anywhere in the program.
Here's my question: If there's no reference anywhere to this int array, then why isn't it being garbage collected?

Maybe you haven't actually released all references to that data.
Or if you have one 45mb image, maybe you have a bunch of other huge ones and you're just seeing those.
Why do you have a 45mb background image, though? Can't you use a standard technique like tiling it?

Newbie here : Huge Problem

I am having a huge problem with my motherboard(well I think). Whenever I start my computer, the motherboard just beeps, I get no display, it does not go to the bias, I cannot get it to do anything. I have tested the other parts and they all seem fine, I just can't figure out whats wrong. Could it be that it has burned out?? Thanks for any help, my specs r in my sig.

Quote from: Tiresmoke on 06-June-05, 05:56:48
There is a sticky post in this area that discusses PSU's in depth and there are many good suggestions there. None of us agree on which is best so it is a great idea to do some of your own research here. However once you have one in mind you may want to ask about what folks think complete with all your specs so they can let you know if there is any issues before you spend hard earned cash.
Also shop hard and get the best you can afford as it will lend greatly to stability and upgrades.
Jerry

8.0.2 - problem 1 - unable to scroll screen when the keyboard is present. Huge problem for emails and other cloud based providers that allow for data entry. We need a fix ASAP!

8.0.2 - problem 1 - unable to scroll screen down or up when the keyboard is present. When typing text, I am unable to see the text I am writing due to this problem. Huge problem for emails and other cloud based providers that allow for data text entry. While the keyboard is present, I am unable to scroll down to see the text, the screen automatically scrolls back up to the top of the screen. We need a fix ASAP!

Have you tried resetting your iPad? You will not lose any data. Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Having a huge problem getting photos out of kalleri into photo shop touch

I have the new Samsung galaxy note 10.1 tablet with PS Touch preinstalled. My huge problem is trying to bring photos for editing/enhancing into PS Touch from "Gallery" *"Gallery" is where all your photos are stored (like Adobe Bridge)
Please help me understand how to bring them into PS Touch easily
Team Costco

Try you question over in http://forums.adobe.com/community/photoshop/touchapps?view=allhttp://

Huge problem, installation froze

Similar Messages

Maybe you are looking for