HUGE problem installing FCP 7 -- Please HELP
I know that the people in this forum are ridiculously smart -- I REALLY need some help!
For the past six days I have been trying to install FCP 7. I had a version of Final Cut Studio 2 and I wanted to upgrade to FCP 3. So I put the install discs in and it automatically made me skip over installing FCP 7. I am attaching a screen shot below. You'll notice that for FCP is says "SKIP" under actions. I thought that this was due to an issue with Installer reading my old serial from FCS 2, because I never had to enter the serial number for FCS 3.
OK, so I downloaded FCS Remover and got rid of Final Cut Studio. I put in my install disc and I did have to enter the serial number. It went through fine BUT I got that SAME EXACT screen with FCP amid others being told to "skip." I do not have the option to change this.
Is there anyone else out there that can help me with this?
Both Final Cut and Compressor are unable to be checked....Most of my projects were saved in FCP 6. My partner tried to give me a project in FCP which is why I tried to upgrade. Right now I can't even access FCP 6. I might try to wipe my hard drive clean and reboot from a Time Machine backup that had FCS 2.
I might try to bring this to the Apple Store. My Macbook Pro is under warranty, though I'm not sure if they would know anything about Pro Apps
Wow, this whole ordeal has really been a nightmare.
Similar Messages
-
My iPod won't reset or charge or connect to my computer. So I can't charge it up or delete my songs. But when I did try to charge my iPod earlier it was beeping at me and the 'do not disconnect' sign and logos were all in black
and white.
Please help because I haven't got a clue what's going on!Welcome to Apple Discussions!
Try connecting it to an AC adapter and resetting it...
http://docs.info.apple.com/article.html?artnum=61705
See if you connect it to the computer and open the iPod updater what happens. Can you restore...
http://docs.info.apple.com/article.html?artnum=60983
The beeping could signify a harddrive problem so the iPod may need repair. First check out this link though...
http://docs.info.apple.com/article.html?artnum=61711
Here is how to send it in for repair...
http://depot.info.apple.com/ipod
btabz -
Huge problem with battery: PLEASE HELP!
Please when you read this try to help, responses are appreciated.
I have an iPod radio/clock/charger combo and for a while it has been working to charge and play. Just recently, as I disconnected the iPod to take it with me I noticed that as soon as I turned it on and the menu popped up the battery instantly drained and said "No battery remains. Please connect to iPod power source." So, I left it alone for about and hour and a half and tried again. This time the menu popped up and I could shuffle the songs but as soon as I pushed the next button it drained and I recived the message again. When I got home, I connected it to my computer and let it charge all night and the next day. I have been trying everyday but it seems as soon as I push two buttons it drains the battery. I have looked up topics and I get things like turning off the EQ, blacklight, and when not in use holding the play button. I do all of these things and I don't leave it in heat or extreme cold. Some of the topics suggested purchasing a new battery but the consequense of losing all playlists and songs is alarming to me. My iPod is completly full and I DO NOT want to add the all back. Yes, I have them backed up. It WILL play and charge on the docking station and the cord to the computer.
Is there any other ways out there for me to fix this problem?
Should I download the 7.1 version of iTunes?
Is it because I use Limewire in addition to iTunes?
Please help me, I will be needing my iPod soon on my NYC trip.
Thank you!
Windows XPStep One: Did you try doing a RESET on the iPod to see if that helps?
When connected to a power source, are you able to use the iPod, navigate the menus, play tunes?
In the meantime, you might try the diagnostics menu on the iPod (while plugged in of course). I forget what is in that menu, but you do a reset and as the iPod starts up with the Apple logo screen, push and hold the center and left (back) buttons at the same time. It should dump you into a diagnostic menu and you can either run automatically through the tests or manually pick which tests.
If you get stuck in any menu or test, you can always dump out by holding down the center and menu buttons again to do another reset.
Patrick -
I have a 8gb A1288 (2nd Gen) ipod touch having huge problem during update, please help
I have a 8gb A1288 (2nd Gen) ipod that has been working fine till now. The device asked for a software update and downloaded the necessary software. During the update process; however, something happened and the computer started not recognizing the device now. On the device screen there is a symbol asking for me to connect the cable to itunes but even if I connect it to the computer, the device is not recognized. Resetting the device didn't solve the problem. Could you please help?
Hello!
Tried DFU mode? This stands for Device Firmware Update and/or Download Firmware Upgrade.
This is how to put your device into DFU:
1. Connect to A computer with iTunes open, Turn off (Whilst still connected)
2. Hold Home + Sleep/wake together for 10 seconds.
3. Let go of sleep wake BUT keep holding home for 10 seconds.
This shoould result in a message on your PC/Mac screen. Follow the steps and it should work. Let me know of the results.
~Naomi =P -
Problems installing Quicktime - please help!
I just purchased a new iPod and I attempted to install Quicktime 7 from the site and as the download completes, an error message pops up saying "Some installation files are corrupt. Please download a fresh copy and retry intstallation." I also tried installing the itunes and quicktime components using the iPod CD, but I also get an error message as the download completes telling me to get a fresh copy and start again. What should I do??? Any help would be really appreciated. Thanks
(I am running on XP)bump
for all of you having problems with Quicktime, install the alternative version. works great! no more problems or time wasted searching for answers to error questions! -
Unknown problem installing itunes please help
Hey, im trying to install itunes on a computer and i keep getting the following error
"itunes installer completed, the installer has encountered errors before itunes could be configured. to retry these operations at a later time, please run the installer again"
anyone had this problem or have any ideas on how to fix it?Hi Fariha I have the exact opposite of what you are experiencing.Mine is in a stopped state and refuses to start. lol. Its in the link below.
http://discussions.apple.com/thread.jspa?threadID=1892032&tstart=0
I might be able to piggy back on your thread. First of all have you triedd stopping the service though task manager? Do that and see if there is an error message. I hope someone can suggest a registry hack that may solve this IPOD service issue. -
Problem Installing iTunes, please help!
I used to be able to have the iTunes before it included video and now I am unable to install iTunes onto my computer. Everytime I try I get this message:
Windows ® Installer. V 3.01.4000.1823
msiexec /Option <Required Parameter> [Optional Parameter]
Install Options
</package | /i> <Product.msi>
Installs or configures a product
/a <Product.msi>
Administrative install - Installs a product on the network
/j<u|m> <Product.msi> [/t <Transform List>] [/g <Language ID>]
Advertises a product - m to all users, u to current user
</uninstall | /x> <Product.msi | ProductCode>
Uninstalls the product
Display Options
/quiet
Quiet mode, no user interaction
/passive
Unattended mode - progress bar only
/q[n|b|r|f]
Sets user interface level
n - No UI
b - Basic UI
r - Reduced UI
f - Full UI (default)
/help
Help information
Restart Options
/norestart
Do not restart after the installation is complete
/promptrestart
Prompts the user for restart if necessary
/forcerestart
Always restart the computer after installation
Logging Options
/l[i|w|e|a|r|u|c|m|o|p|v|x|+|!|*] <LogFile>
i - Status messages
w - Nonfatal warnings
e - All error messages
a - Start up of actions
r - Action-specific records
u - User requests
c - Initial UI parameters
m - Out-of-memory or fatal exit information
o - Out-of-disk-space messages
p - Terminal properties
v - Verbose output
x - Extra debugging information
+ - Append to existing log file
! - Flush each line to the log
* - Log all information, except for v and x options
/log <LogFile>
Equivalent of /l* <LogFile>
Update Options
/update <Update1.msp>[;Update2.msp]
Applies update(s)
/uninstall <PatchCodeGuid>[;Update2.msp] /package <Product.msi | ProductCode>
Remove update(s) for a product
Repair Options
/f[p|e|c|m|s|o|d|a|u|v] <Product.msi | ProductCode>
Repairs a product
p - only if file is missing
o - if file is missing or an older version is installed (default)
e - if file is missing or an equal or older version is installed
d - if file is missing or a different version is installed
c - if file is missing or checksum does not match the calculated value
a - forces all files to be reinstalled
u - all required user-specific registry entries (default)
m - all required computer-specific registry entries (default)
s - all existing shortcuts (default)
v - runs from source and recaches local package
Setting Public Properties
[PROPERTY=PropertyValue]
Consult the Windows ® Installer SDK for additional documentation on the
command line syntax.
Copyright © Microsoft Corporation. All rights reserved.
Portions of this software are based in part on the work of the Independent JPEG Group.
Can anyone help me at all?Hi Fariha I have the exact opposite of what you are experiencing.Mine is in a stopped state and refuses to start. lol. Its in the link below.
http://discussions.apple.com/thread.jspa?threadID=1892032&tstart=0
I might be able to piggy back on your thread. First of all have you triedd stopping the service though task manager? Do that and see if there is an error message. I hope someone can suggest a registry hack that may solve this IPOD service issue. -
Problem installing. Please Help!
I had an older version of itunes installed on my computer with an older ipod i had. I then installed video ipod itunes and now this happens whenever i click 'itunes'
[IMG]http://i15.photobucket.com/albums/a375/adamisheretosavetheday/ipod.jpg[/IMG]Try installing an older version of iTunes first.
To be quite honest I wouldn't got to iTunes 7 just yet anyway, there's a LOT of bugs. Stick with 6.0.5
Older versions of iTunes can be found here http://www.apple.com/support/downloads/
Windows XP Pro SP2; Matrox G550; Dual screen -
It won't let me drag an effect from the browser all of a sudden. I have always been able to do before. I am using effects from favorites bin and when I try to drag it to the timeline, it won't move. I have never had this problem before. Please help.
P.S. I have tried other effects including transitions and it still won't let me drag.Wow that was really quick, thank you so much. Im not sure at all which version it was because i said it was around 4 years ago he bought it. I know it isn't under his username, since he's a PC person (ugh) so i know its probably registered to one of our actual names. isn't there some way to look it up since we did register it, because I'm not even sure where the disks are from when we bought it (we've moved a lot and also have two storage lockers, i know i would have kept it with other disks) but my cd rom drive is actually broken on my computer as well ( i think it got stepped on and is now squished and won't eject or run disks.)
So is there anyway they can look up that its registered to one of our names since we did register it when we bought and installed it, or do i really have to find the disk with some sort of proof of purchase (i know there would be no receipt after all this time)
either way, ill do what you suggested to the best of my abilities and thank you so much for answering my questions, i can't even open the program as its incompatible and find out the info from that) so I'm in a bit of a pickle and your response was so thorough and it didn't seem to be posted long enough to even write a well researched response, thanks, all the best,
sarucia -
PC crashed. CD-Rom not working. Downloaded CS5 Web Premium but not able to install. Please Help. Help.
I had problem with my CD-rom, it not able to open. On top of that recently my PC crashed.
I managed to install other software, but not able to install CS5 Web Premium.
Ive downloaded the electronic version via Adobe Downloads, but not able install it. -
Question
I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
'''(in English)'''Hi Danny,
Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
but not 180, right?
I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
=COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
or
=SUM(IIF(Fields!TICKET_STATUS=4,1,0))
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support -
my ipad give me the apple sign without running up it appears all the time in the screen , i tries to reset my ipad , but still in this problem , can you please help me?
You may want to look at this about using recovery mode to restore your iPad.
http://support.apple.com/kb/ht4097 -
I'm getting an error message on Windows 8. Missing apple application support. Itunes will not install. Please help!!, I'm getting an error message on Windows 8. Missing apple application support. Itunes will not install. Please help!!
You probably need to either uninstall and reinstall itunes or to download the apple application support by itself
you can download the itunes http://www.apple.com/itunes/ here
then to do a complete uninstall / reinstall follow these instructions http://support.apple.com/kb/ht1923
you could also use 7zip to extract the individual installer for apple application support from the itunes setup file http://www.7-zip.org -
yesterday I have purchased Ipad2 with 3G but did not able see in built aceTime on my scree do we need to Install? please Help, yesterday I have purchased Ipad2 with 3G but did not able see in built FaceTime on my scree do we need to Install? please Help.
See this support doc on how to use FT... http://support.apple.com/kb/HT4319
-
Problem Installing FCP Studio 2 on SL 10.6.2
Hello All
when trying to install an original FCP Studio 2,
the installation gets stuck towards the end. (around 95% of the first general installation disk).
this has happened 3 times.
After rebooting, the programs seems to be in the application folder.
but they are missing many files and meterial.
( because i did'nt get a chanse to go through the other Content disks... )
did anyone had a problem installing FCP Studio 2 on SL ?Here's a way to work around the possiblitily of a damaged disk or an intermittent dvd reader.
Insert your FCS install disk, make a disk image of it (using Disk Utility) and leave the image on the Desktop. Eject the FCS install disk, and create a disk image for each of the FCS disks.
Now, with all the images on the desktop, double click on the install disk image and start the installation process. It should take less than an hour to install EVERYTHING.
Once the installation is complete, copy the disk images to a safe place. You'll have them available if you ever need to reinstall FCS.
good luck,
x
Maybe you are looking for
-
On SSRS Export or Print, Select the first 9 columns out of 15 columns
Hello Every1, My Greetings for the day!!! I am Hiren Parikh from India. I am developing a SSRS report (Tablix) which has 15 columns. While developing the report, I have come a crossed a strange requirement. When the reports gets loaded in SSRS Previe
-
Multiple foreign key joins between two tables
Hi, I have a question about building a repository. I have a date dimension and one fact. The fact table has about 10 foreign key columns that link to the date Dimension. In this case should I create 10 aliases to create joins in the Physical and BMM
-
Hello, my Mac Pro will not update my apps. It says I havent owned the major version of the software. Why can't I update my apps? Please help. Thank YOU. Joe Barbato <Email Edited by Host>
-
How can I work with my adobe Lightroom Version 5 which was added to my Samsung NX3000. If I want to load an .SRW File it is not possible, only the .JPG File. How and from where can I the Module and how is it to install ?
-
What is going on with iTunes, I connected my new iPad and suddenly safe mode freezes me out and nothing works and I cannot access my iPad through iTunes. iTunes on my computer is also useless. What is safe mode , how did it get turned on and how can