Huge problem need help

I got an ipod nano today and i searched on google for ipod games and found idoom. It said i need ipodlinux which is where i downloaded it. I installed ipodlinux and my ipod doesn't work anymore. I get the folder with the exclamation mark and www.apple.com/support/ipod. Iv'e done the five "r" test and all. help.
ipod nano Windows XP
Windows XP

I'm afraid you are pretty much on you own with. As far as I know, you have voided your warranty as damage caused by installing non Apple software would not be covered. Apart from that, even within the iPod Linux project, the Nano is unsupported hardware. The best you can do is go to this link and follow the "What if something goes wrong?" instructions: http://ipodlinux.org/Installation#Unsupported

Similar Messages

WRT54G huge problem NEED HELP! FAST!

I puchashed my WRT54G router about two weeks ago and connected it to my network and connected my xbox and xbox live to it. i noticed the live wasn'tworking as well as it should and found that i needed to open some NAT ports and update my firmware. While updating my firmware the interet page expired and i'd assume it didn't update, then i lost connection to live and the internet. It said on linksys advisor that the network had changed. So i tired to reinstall the router and it would'nt work. i made sure all the plugs were in the correct spot also, and even tried resetting the router but still no dice, and the big problem is i can't even view the router on that i.p website thing!!
p.s. i haveverizon internet and have a westell 1600 modem
if anyone can help me god bless you

verizon , ur modem is not really a modem . its a router/modem .
its already giving u an ip address in the same DHCP range as of the router . i.e: 192.168.1.xx
u need to just plug in ur router to computer , uninstall the easy link(wont be of any gud in verizon connection ,and its buggy as well ).
once router is connected to computer from port no.1.2.3or 4 ..any one .
Push the reset button on router for 30 seconds ..den unplug the power cable and plug in the power cable after 20 seconds.
then try to log into the routers web user interface - 192.168.1.1
see if it opens?
if yes
then ull find A local ip address option there- change it to - 192.168.7.1
and save settings .after saving the settings u might again kicked off from internet or set up web user interface.
then again , unplug the computer cable from router , and Power from router
wait for 20 seconds , now plug the verizon / westell into back of the router's into internet port as well.
power cycle.
lights should be like -power/wlan/1/internet - on router.
try to go online .
if it works ....let me know the status ?
pe@c3
~~~Nobudy's Perfect , i try To Be So ! Each n every moment of maH LYF , AND I THINK dat wats make Me "Different" From others....~~~

Conatcts huge problem need help A.S.A.P

I am having trouble with my contacts on my Ipod touch at the top of the page it has a half circle with a arrow and i have tried clicking it and it does nothing it wont let me add contacts. it has also erased all of my contacts put on there and has only kept my facebook conatcts! in DESPERATE need for help need them back A.S.A.P! any help is appreciated

i got it on my own last night thx but my email is still not working from my past convo

I've A huge problem,need help soonest

I've bought a BLACKBERRY 8310 "VODAFONE", from a guy brought it from Australia,,
I live in the middle east:Jordan:
I cann't get it work with our mobile network,..also want an arabic interface instead of english
pls advice
rgs
Message Edited by zjor2000 on 07-22-2008 12:13 PM

1) your blackberry is set for an english spoken language country.
you have to set it to another language. If it has not been removed, you can select it in the options (check the manual, you can download a PDF on the Blackberry.com website).
2) your blackberry is linked to the carrier Vodaphone. You can use it only if you have a Vodaphone subscription. If you have not, you have to ask your phone carrier if it can deal with Blackberry devices. Call the hotline. If it's possible, they will tell you how to install a new OS that will enable you to use your Blackberry with your current carrier.
Message Edited by Xandrex on 07-31-2008 08:18 PM
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Zen Vision:M problem, NEED HELP!

My zen vision:m is starting to run slowly. It started right after my player froze and i reset it.Now its really slow and barely even switches screens sometimes.Right now its just a black screen with the keypad lit up.Whats wrong with it'sI NEED HELP!

johnnnyp wrote:
hi, i have a problem with my creative vision m. i wanted to watch a movie and it froze. i tried to shut it down but it wouldnt respond, and now is frozen. please help me if you can!
You know its kinda rude to derail XBenzinoFla thread with your own problems, make your own thread next time.
But to the both of you especially XBenzinoFla, try putting your ZVM in rescue mode and run scan disk to see if it hel
ps.

Zen Micro problem need help

Today i was listening to music and my zen micro just froze while playing and no buttons could be pressed and the lock button wasnt on. So i took the battery out and rebooted the player but it froze at the creative screen. I went home and i went to recovery mode and tried to reload the firmware but it said erasing firmware for more than 2 hours. So then i tried a format but it said formating for the same amount of time. I need help please. Also, recently i've had problems witht the headphone jack. When ever i would stick it in it would sound distorted and i would have to move it around until i got it to a certain spot to hear it good again. If anyone else has this problem please tell me. One more thing i had returned my other micro zen in for hard dri've probems and this was my new one do u think if i have to return in (hopefully not) that they would accept it.

If the functions in Rescue Mode aren't working properly then you need to contact Creative Support.

Uh oh huge problem please help me!

Ok so long story short, i made a 2nd account, i was on it setting it up etc, i was looking at the recent what i did today, and for some reason i wanted to clear that up because i don't know i just wanted it to be clear i guess because i'm a perfectionist lol idk. ok so anyways, i dragged all that to the trash (i'm an idiot i know, AH i don't even know why i did that but ugh.) so a ton of stuff was then in the trash, including the applications like settings and garageband and a bunch of other stuff.
So then i realize what's now in the garbage and i get it out, put it on the desktop, etc. i click on it on the desktop and some of it opens but not really, because it says i have to reinstall it, or else it just doesn't open at all. so i can't even open the computer settings because that's one of the programs that won't open!!! and i can't use time machine because i just got this computer and hadn't yet set up time machine.
Basically, now i can't open like any of those programs and it's a huge problem. what should i do? i want to just somehow get the computer back to when it came out of the box, like get everything off it, reinstall leopard, and start fresh. how do i do this, or do you have a better idea? oh and also what will happen to my itunes library? how can i keep it the same, because i had spent like hours getting all my songs onto my new computer and getting my iphone to sync with my new computer and making my iphone work officially with my new imac.
Please help me!! oh and please don't be like wow you're stupid why would you throw that away, because i didn't even mean to and i know i'm stupid lol.
please only answer if you can help me! oh and sorry about the bad typing i don't feel like capitalizing since this is so long. thanks! i hope you can help!

You may get more response if you post in the ipod Nano forum.

Still stuck with the same old producer consumer weight problem need help

Hello All,
This is the problem I am stuck with right now.
I have two array lists one producer array list and one consumer array list denoted by a and b
P1 P2 P3 P4 P5
5 6 7 8 9
C1 C2 C3 C4 C5
2 3 4 5 6
Now we find all those producer consumer pairs which satisfy the criteria Pi>=Ci
We have the following sets
(5,2)(6,2)(7,2),(8,2),(9,2)
(5,3)(6,3)(7,3),(8,3),(9,3)
(5,4)(6,4)(7,4),(8,4),(9,4)
(5,5)(6,5)(7,5),(8,5),(9,5)
(6,6)(7,6)(8,6),(9,6)
Let us done each of them with Si
so we have S1,S2,S3,S4,S5
we assign a third parameter called weight to each element in Si which has satisfied the condition Pi>=Ci;
so we we will have
(5,2,ai),(6,2,bi),(7,2,ci)....etc for S1
similarly for S2 and so on.
We need to find in each set Si the the pair which has the smallest weight.
if we have (5,2,3) and (6,2,4) then 5,2,3 should be chosen.We should make sure that there is only one pair in every set which is finally chosen on the basis of weight.
Suppose we get a pair (5,2,3) in S1 and (5,2,3) in S2 we should see that (5,2,3) is not used to compare to compare with any other elements in the same set S2,
Finally we should arrive at the best element pair in each set.They should be non repeating in other sets.
Given a problem
P0 P1 P2 P3 P4
9 5 2 2 8
6 5 4 5 3
C0 C1 C2 C3 C4
we have So as (P0,C0) and (P4,C0)
assuming that the one with the smaller index has lesser weight PO is selected.In the program I have used random weights.from set S1 we select the pair PO,CO
S1 =(P0,C1),(P1,C1) and (P4,C1)
since P0 and P4 are already used in previous set we dont use them for checking in S1 so we have (P1,C1) as best.
S2=(P0,C2),(P1,C2) and (P4,C2) so we dont use P0,C2 and P1 and C2 because PO and P1 are already used in S1.
So we choose P4,C2
in S3 and S4 ae have (P0,C3),(P1,C3),(P4,C3) so we dont choose anything
and same in S4 also.
So answer is
(P0,C0),(P1,C1) and (P4,C2).
My program is trying to assign weights and I am trying to print the weights along with the sets.It doesnt work fine.I need help to write this program to do this.
Thanks.
Regards.
NP
What I have tried till now.
I have one more question could you help me with this.
I have an array list of this form.
package mypackage1;
import java.util.*;
public class DD
private int P;
private int C;
private int weight;
public void set_p(int P1)
P=P1;
public void set_c(int C1)
C=C1;
public void set_weight(int W1)
weight=W1;
public int get_p()
return P;
public int get_c()
return C;
public int get_x()
return weight;
public static void main(String args[])
ArrayList a=new ArrayList();
ArrayList min_weights_int=new ArrayList();
ArrayList rows=new ArrayList();
ArrayList temp=new ArrayList();
Hashtable h=new Hashtable();
String v;
int o=0;
DD[] d=new DD[5];
for(int i=0;i<4;i++)
d=new DD();
for(int i=0;i<4;i++)
d[i].set_p(((int)(StrictMath.random()*10 + 1)));
d[i].set_c((int)(StrictMath.random()*10 + 1));
d[i].set_weight(0);
System.out.println("Producers");
for(int i=0;i<4;i++)
System.out.println(d[i].get_p());
System.out.println("Consumers");
for(int i=0;i<4;i++)
System.out.println(d[i].get_c());
System.out.println("Weights");
for(int i=0;i<4;i++)
System.out.println(d[i].get_x());
for(int i=0;i<4;i++ )
int bi =d[i].get_c();
ArrayList row=new ArrayList();
for(int j=0;j<4;j++)
if( d[j].get_p() >=bi)
d[j].set_weight((int)(StrictMath.random()*10 + 1));
row.add("(" + bi + "," + d[j].get_p() + "," +d[j].get_x() + ")");
else
d[j].set_weight(0);
row.add("null");
rows.add(row);
System.out.println(rows);
int f=0;
for(Iterator p=rows.iterator();p.hasNext();)
temp=(ArrayList)p.next();
String S="S" +f;
h.put(S,temp);
String tt=new String();
for(int j=0;j<4;j++)
if(temp.get(j).toString() !="null")
// System.out.println("In if loop");
//System.out.println(temp.get(j).toString());
String l=temp.get(j).toString();
System.out.println(l);
//System.out.println("Comma matches" + l.lastIndexOf(","));
//System.out.println(min_weights);
f++;
for(Enumeration e=h.keys();e.hasMoreElements();)
//System.out.println("I am here");
int ii=0;
int smallest=0;
String key=(String)e.nextElement();
System.out.println("key=" + key);
temp=(ArrayList)h.get(key);
System.out.println("Array List" + temp);
for( int j=0;j<4;j++)
String l=(temp.get(j).toString());
if(l!="null")
System.out.println("l=" +l);
[\code]

In your example you selected the pair with the greatest
distance from the first set, and the pair with the least
distance from the second. I don't see how the distance
function was used.
Also it's not clear to me that there is always a solution,
and, if there is, whether consistently choosing the
furthest or the closest pairs will always work.
The most obvious approach is to systematically try
all possibilities until the answer is reached, or there
are no possibilities left. This means backtracking whenever
a point is reached where you cannot continue. In this case
backtrack one step and try another possibility at this
step. After all possible choices of the previous step,
backtrack one more step and so on.
This seems rather involved, and it probably is.
Interestingly, if you know Prolog, it is ridiculously
easy because Prolog does all the backtracking for you.
In Java, you can implement the algorithm in much the same
way as Prolog implementations do it--keep a list of all the
choice points and work through them until success or there
are none left.
If you do know Prolog, you could generate lots of random
problems and see if there is always a solution.

Ipod problem NEED HELP ASAP

Hello guys,my ipod touch has battery problems and internal speaker are not working and will apple replace me a new one,i even have 1 year warranty and i want a new ipod touch white instead of black<<<plz plz plz reply ASAP plz really need HELP!THANK YOU

If you iPod is defective, in warranty and not abused Apple will replace it with a refurbished one. They may or may not replace it with the white one. You will have to ask.
Other users have asked the same question but I hav never heard them come back with whether or not they go the color changed.

Another Infinite Login Loop Problem - need help badly

Hello. I need help.
When I start up my iMac (24 inch last generation model) I can't log into the OS. When I enter my password I see the default OS wallpaper (nothing else) then it kicks me to a blue screen then right back to the login. Same thing over and over. I've already ran disk utility off of the install CD to repair permissions, etc... but no luck. This even happens when I enter into safe mode. I'm running the latest version of the OS.
Can anyone help me?

Restore the bootable backup/clone or Time Machine backup. Without one, you have a difficult situation. First thing to try is boot with your install disc, run Disk Utility, and repair the disk.

Ipod nano Problems need help fast!!!!!!

I got my nano in october everything was working fine.Until 2 weeks ago my ipod wasnt getting reconized by itunes.Im really getting frustrated and i need help.

Welcome to Apple Discussions!
Read through this...
http://docs.info.apple.com/article.html?artnum=61711
btabz

Urgent Problem, need help asap.

Hello everyone,
I'm sorry for the alarmist title, but I need help and I need it badly. Just last night, my macbook froze with nothing working. The mouse froze, the interrupt keys didn't work, nothing. I shut down the laptop, and tried to restart. I noticed a clicking sound coming from the lower left hand corner of the macbook. I'm assuming this is the hard drive.
What happens is that there will be two clicks happening in a rythmic fashion, and after 15 second of booting up, a folder will appear with a question mark on the screen. The only thing I can do is power it down. Can someone please describe what is happening and make suggestions?
The kicker is that I'm a college student studying in Denmark for the semester. The laptop is my only lifeline to back home. Please, any help is greatly appreciated.
Matt

You may have a disk failure or simply corrupted files. If you have a bootable backup that is working, then you can boot from it, erase your hard drive, then restore your backup. If not then do this:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
If the drive is OK then you can reinstall OS X:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

I am Student and having a huge problem need some help quick!!!

Hello I am student in college and i am developing a file share portal for my final year project using Flex 3 on the client side, java on the server side, hibernate for ORM, Sping MVC and My Sql 5. I am having a bit of a problem parsing this:
------------GI3ae0ae0ae0GI3KM7KM7Ef1cH2ei4
Content-Disposition: form-data; name="Filename"
Flex3.txt
------------GI3ae0ae0ae0GI3KM7KM7Ef1cH2ei4
Content-Disposition: form-data; name="action"
upload
------------GI3ae0ae0ae0GI3KM7KM7Ef1cH2ei4
Content-Disposition: form-data; name="file"; filename="Flex3.txt"
Content-Type: application/octet-stream
Flex 3 can be a pain in the arse!!!!!!
------------GI3ae0ae0ae0GI3KM7KM7Ef1cH2ei4
Content-Disposition: form-data; name="Upload"
Submit Query
------------GI3ae0ae0ae0GI3KM7KM7Ef1cH2ei4--
This is my Java code:
package com.file.exchange.service;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import javax.servlet.http.HttpSession;
import javax.xml.parsers.DocumentBuilder;
import javax.xml.parsers.DocumentBuilderFactory;
import org.w3c.dom.Document;
import org.w3c.dom.Element;
import org.w3c.dom.Node;
import org.w3c.dom.NodeList;
import org.xml.sax.InputSource;
import java.io.*;
import java.sql.Blob;
import com.file.exchange.vo.Files;
import java.util.Date;
import java.text.DateFormat;
import java.text.SimpleDateFormat;
import java.io.IOException;
import java.io.PrintWriter;
import java.io.File;
import org.apache.commons.fileupload.*;
import org.apache.commons.fileupload.disk.*;
import org.apache.commons.io.*;
import org.apache.commons.fileupload.servlet.*;
import java.util.Iterator;
import java.util.List;
import java.util.ArrayList;
import java.util.ListIterator;
import javax.imageio.ImageIO;
import javax.imageio.ImageReader;
import javax.imageio.stream.ImageInputStream;
import org.apache.commons.fileupload.util.FileItemHeadersImpl;
import javax.servlet.*;
import javax.servlet.http.*;
public class FileUpload extends FileBaseService
     InputStream in = null;
     OutputStream out = null;
     ByteArrayOutputStream bout = null;
     @SuppressWarnings("unchecked")
     @Override
     protected String getXmlFromOperation(HttpServletRequest request,HttpServletResponse response) throws Exception
          int readBytes = -1;
int length = request.getContentLength();
in = request.getInputStream();
byte[] buffer = new byte[length];
bout = new ByteArrayOutputStream(length);
while((readBytes = in.read(buffer, 0, length)) != -1) {
bout.write(buffer, 0, readBytes);
byte[] inData = bout.toByteArray();
FileOutputStream fos = new FileOutputStream("C:/Documents and Settings/Andrew Hobbs/Desktop/helloworld.txt");
for(int i=0; i<inData.length; i++)
fos.write(inData);
fos.close();
          DateFormat dateFormat = new SimpleDateFormat("yyyy/MM/dd HH:mm:ss");
          Date date = new Date();
          String data = "Hello";
          String id = "1";//getCharacterDataFromElement(vID);
          String name = "meh";//getCharacterDataFromElement(vname);
          String type = "1";//getCharacterDataFromElement(vtype);
          String size = "5555";//Long.toString(fileObject.length());//getCharacterDataFromElement(vsize);
          Blob content = org.hibernate.Hibernate.createBlob(data.getBytes());//fisFile);//data.getbytes[]
          String date_uploaded = dateFormat.format(date);
          Files file = getFileDao().uploadFile(Integer.parseInt(id), name, type, Integer.parseInt(size), content, date_uploaded);
          return file.toXml();
I will so grateful if somebody could point me in the right direction with this or point me to possible examples of parsing this!
Thanks

Let me warn you up front: never mark your questions as urgent. People really don't care how urgent it is to you, and will likely only irritate them enough to not want to help you. Lucky for you, I couldn't care less ;)
you seem to want to get an uploaded file using FileUpload. Did you see the user guide on how to do this? You seem to be going about it in completely the wrong way.
[FileUpload user guide|http://commons.apache.org/fileupload/using.html]
Also:
FileOutputStream fos = new FileOutputStream("C:/Documents and Settings/Andrew Hobbs/Desktop/helloworld.txt");Hardcoded paths in your code? Not very portable is it. I would define paths in a properties file. Read this:
[smartly loading properties|http://www.javaworld.com/javaworld/javaqa/2003-08/01-qa-0808-property.html]

Huge problem, need urgent help.

Here's the story:
I dropped my ipod touch and cracked the screen, the touch screen was working fine.
After fixing my screen, I attempted to connect the ipod to the computer to charge it and update my music/apps. However it would not recognise as a apple device on itunes but it would charge.
So I thought to solve this problem, i can just restore it to factory settings through the ipod but now whenever i turn the ipod on, the screen is just stuck at the apple logo screen with the loading wheel under it.
So in conclusion, is there any way i can fix it FOR FREE? or is the ipod just died.
Thank you

No luck, the device is just stuck on the itunes + usb cable, it does not recognize on Itunes. Thank you though

G5 DVI to VGA Dell Monitor Connection problems, need help!!!!!!!!!!!!!!!!!!

hello,
I'm running two dell monitors both of which were connected via DVI to my g5 quad dual dvi. My tv broke and I'm using one of my monitors to connect the cable boxes HDMI input to the dells DVI input, it works great.
My problem is that i still want to run two monitors from my mac and still be able to switch channel sources from the Dells source button allowing me to switch from TV to Mac. Since I took up the dvi port on one of my monitors to connect to the cable box via HDMI, I have a free DVI cable. I purchased a tiny converter that allowed to change one end of the free DVI cable to VGA. I used this method to connect the cable to my g5's dvi port and the configured end to the VGA port on the monitor with no luck.
The Dell monitor does not pick up any signal and just goes to sleep as if my computer does not exist. The TV works fine and I'm able to switch sources. Please note that I'm not using the DVI-VGA adaptor that came with my g5 and don't know if this would make a difference. If it does, how do i set this up because this adaptor is like 5 inches long.
Does the adaptors DVI end need to be connected to the back of the g5 or does the VGA end need to be connected to the monitor or does it not matter. I need a longer dvi-vga cable as well, do they make them. This all depends if the problem actually is that that I'm not using the DVI-VGA cable that came with my mac to connect to the monitor in the first place.
Can anyone help me out here. I'm using the Dell 2208WFP Ultra Sharp.

Bad adapter?
The G5 ports are DVI-I. Any good DVI-I to VGA adapter should be fine.

Huge problem need help

Similar Messages

Maybe you are looking for