Huge problems with wireless, would need some help

Sorry for the bad topic, and sorry for my english.
And now the problem.
I have just bought my first laptop, and got almost everything to play nice in arch, except the wireless.
My card is a Intel PRO/Wireless 3945ABG (iwl3945), and i have a Dlink 524 router (abg).
Using WAP, but can change this if its help.
Right now I'am using NetworkManager (0.6.5-3 from rep) and KNetworkManager (from AUR), and it works very very bad.
It can't connect at startup (or atleast it doesn't...), it takes several attempts to get a connection, it drops the connection and dont reconnect when it does, and so on. Its almost unusable and force me to use wired a connection just to be sure to be able to write this.
After what i read in different forums and mailinglists, there seems to be a lot of problems with wireless at the moment?
Anyone got this combination to work fine? Or are there any other way of configuration i should try? Suggestions?
Thanks in advance!

I've had a lot of problems with wireless networking for several weeks recently, ever since I upgraded vanilla kernel26 from v.2.6.22 to v.2.6.23 (see http://bbs.archlinux.org/viewtopic.php?id=40145).  I'm using the Windows driver bcmwl5 for the Broadcom 4311 chipset via Ndiswrapper, and I'm using WPA-PSK (TKIP) encryption.  I also use a D-Link DI-524 router.  What finally cured the problem was to install the new wicd (v.1.3.1) network manager which is now in extra and to set up all networking interfaces in that GUI, abandoning using Arch network profiles and all the detailed setup in /etc/rc.conf.
My /etc/rc.conf now only contains (I'm only showing entries pertinent to networking)
MODULES=(ndiswrapper capability sg acpi-cpufreq cpufreq_ondemand cpufreq_performance cpufreq_powersave)
HOSTNAME="RFDellLT"
DAEMONS=(syslog-ng @nfslock @nfsd @netfs @crond !network hal cpufreq portmap wicd sshd cups alsa @openntpd privoxy)
i.e. no more INTERFACES, not even "lo", gateway, ROUTES, NET_Profiles.  Everything is set up through wicd.  You only need to put the wicd daemon in the DAEMONS array (after hal which also loads dbus), and the network daemon isn't needed anymore.  Also you should uninstall any other networkmanager.
To put the wicd icon in the system tray, create a shell script (give it any name) in the .kde/Autostart/ directory in your home directory (if you use KDE, otherwise do the equivalent thing for any other DE/WM) that contains the command /usr/lib/wicd/tray.py.
You may want to try wicd, perhaps it'll fix your problem.  It certainly has gotten good press in this forum.

Similar Messages

  • Hi, can anyone help me out with this, I need some help on designing GUI for e-learning coursewares. Some tutorials or some helpful sites will do.

    I need some help with the GUI design.

    Have you tried the line inputs on the back of your FirePod? If you update its firmware (not sure if you will need to or not), I seem to remember hearing that the FirePod can run without FW connection, i.e. stand alone. In this mode with the outs from your mixer into line ins 1-2 (2nd from left on the back) it should work fine. I say should because I have never tried. However, these are used for returns from an external effects unit. I assume here, and the important word is assume, that there are two so that they can be used as a stereo send or as a mono send. Worth a try! Let us know how it goes.
    Best, Fred

  • Problems with MSN Messenger - need quick help

    I posted yesterday that I was having some trouble with my Ameritrade stock trading account, it was a java issue and they had me delete the cache in java and my Ameritrade worked again.
    Now this morning I'm having problems with MS messenger which I use all day long for my job. When I try to sign in it keeps telling me it can't sign me in and I must not be connected to the internet. Which I am.
    Its got some thing to do with my airport wireless thingy. Is there some way to "open" that up. When I unplug it and then replug it back in I can sign in to MS messenger for about a minute but then it somehow blocks it.
    It keeps me on the internet but I get a message that I an not connected to .NET Messenger service. It is blocking me on my laptop PC now too. And it behaves the same way. After unplugging the airport I get a quick window where I can sign in but after that it blocks that .NET messenger service.
    Is there some way I can open up the airport so I can get on the NET messenger service. Skype and iChat work but I can't use either for my job.
    Does anyone have any suggestions (I'm begging here cuz i start work at 9:30 am and I need it working by then!).
    Thanks, Susan

    Wow this is a mess, I want to add that again i'm sure its the airport extreme somehow. However on my PC laptop I can sign into messenger with an older version of it but when i try the new LIVE messenger it won't let me sign in.
    The iMac version forces you to use the latest version so I can't use an older "non live" version to sign in with. I am praying someone can help me figure out what is wrong.
    Thanks sorry for reposting but i'm frantic!
    Susan

  • Z77A-GD65 with 3570k noobie needs some help.

    Hi Guys,
    First of all I’m very impressed by the looks of GD65, I just hope it will work as well as it looks… 
    So finally I should get my RAM tonight (4 x 4gb Sammy ECO ram).   I believe there might some issues with o/c the memory, which I believe was a ittle improved in beta bios.
    3570k
    Silver Arrow SB-E HSF
    4 x 4gb Sammy eco ram
    Gigabyte gtx670 GPU should arrive early next week.
    Corsair TX750
    Windows 7 x64 SP1 Home
    HAF 922 case
    I’ll use this method to upgrade mobo to the latest official BIOS 10.5 using recommeded method.
    https://forum-en.msi.com/index.php?topic=108079.0
    Also should I wait for Gtx670 to come in next week, or would I be able to use hdmi/dvi output from GD65 (IB HD4000 IGPU) to display 1080P on LG 32LD450 display.  I believe there were some reports only VGA output works? Is it true?   
    Also where should I get most stable NIC Intel drivers (I saw some people having problems with them) and 898 audio drivers?
    Is official 10.5 BIOS recommend or is there a “better” beta BIOS I should install (and where do I get it from)?
    I do apologize for so many questions, but I’m very scared to put this rig together with so many z77 chipset issues around…   I’m just trying to avoid “ I told you so” from my wife… LOL  I’m concern about error 55 (memory not installed), in some cases CPU installation issues.  I’m coming from several years of AMD builds… so IB it is very new to me…
    Any help would be much appreciated… 
    TIA

    I promise as soon as I get everything stable I will test it with 200mm fan as intake and outtake...
    I love big sinks and fans, I will post some pictures after everything is done.  My system is nothing to brag about, HAF 922 with  3 x 200mm  1 x 120mm, 1 x 140mm and Silver Arrow SB-E (dual tower) HSF.    I’m using Lampron fan controller to control fans.
    Positive pressure is very interesting concept and some swear it works...
    http://www.silverstonetek.com/techtalk_cont.php?tid=wh_positive&area=usa
    So I went to bed at 3am last night, I did go far, as I was taking updates, installing drivers, changing drive letters… etc..   
    System seems to be stable at stock/default 10.3  bios settings, all I changed was to set fans on CPU (I selected 70C to be my goal) and SYSFAN1 to run at 50% (my 140mm internal fan, which is strapped to the drive cage).   
    The NIC card seems to be working fine,  Intel IGPU video works fine (using dvi to hdmi cable). I haven’t installed any temp monitoring software so I cannot tell you how is my IB CPU. 
    The only problem I found last night was I couldn’t get any audio from rear speaker output (I tried display’s and 2.1 speakers).   The driver seems to be working, because I can see sound bar moving up and down.  Also when I connect my headphone to my front audio output, I can hear sound and I get pop up saying I have headphones connected.    When I remove headphones I get another pop up saying the headphones have been disconnected.  When I connect anything to the green output (speaker out), I get pop up saying rear speakers were detected, however there is nothing no static, noise or anything…     I tried to disable/enable device without luck.      I’ve used all drivers from MSI website, should I try to see if there are newer/older drivers?   Since I’m currently using 10.3 BIOS, should I try latest 10.5?      Have you guys heard about this problem before?      If you have any ideas please let me… I did poke around BIOS but I couldn’t find anything related to audio…   
    Overall (other than small audio hiccup) “so far” I’m very happy from my purchase… 
    Thank you

  • Serious problems with paint method, need major help

    I've got a mjor problem with displaying a BufferedImage Object. My program takes in an image, i call a method on it which creates an ImageObject, imgObj, which contains the following values:
    Image width, called width
    Image height, called height,
    array of 8 bit integers for the ARGB value of each pixel, called int [] imgCol
    I've managed to create a Buffered Image of the form:
    //make a buffered image ready to take the array of pixels
    bufferedImage = new BufferedImage( imgObj.width, imgObj.height, BufferedImage.TYPE_INT_ARGB);
    Then I set the ARGB values in the BufferedImage, by specifying the integer array of pixels, imgCol:
    //set the values in the buffered image using buffered image method
    bufferedImage.setRGB( 0, 0, imgObj.width, imgObj.height, imgObj.imgCol, 0, imgObj.width);
    Then I try to paint it, callling repaint() in the same method as the code above.
    Now when I try the following stuff I get a Null Pointer Exception:
    public void paint(Graphics g){
         paintImage(g);
    public void paintImage(Graphics g){
         Graphics2D ImageGraphic2 = (Graphics2D)g;
         // Draws the buffered image to the screen.
         ImageGraphic2.drawImage(bufferedImage, 0, 0, this);
    Can anyone help me in fixing this problem?

    Here's the full stack trace, can't make heads or tails of what it's about though
    Full thread dump Java HotSpot(TM) Client VM (1.4.1_01-b01 mixed mode):
    "AWT-EventQueue-0" prio=7 tid=0x0ADAB440 nid=0xb38 in Object.wait() [ef5f000..e
    5fd8c]
    at java.lang.Object.wait(Native Method)
    - waiting on <02F78010> (a java.awt.EventQueue)
    at java.lang.Object.wait(Object.java:426)
    at java.awt.EventQueue.getNextEvent(EventQueue.java:333)
    - locked <02F78010> (a java.awt.EventQueue)
    at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchT
    read.java:161)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThr
    ad.java:150)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:144
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:136
    at java.awt.EventDispatchThread.run(EventDispatchThread.java:99)
    "DestroyJavaVM" prio=5 tid=0x00034DB8 nid=0x5dc waiting on condition [0..7fadc]
    "Java2D Disposer" daemon prio=10 tid=0x0AD4D1F0 nid=0x218 in Object.wait() [ef9
    000..ef9fd8c]
    at java.lang.Object.wait(Native Method)
    - waiting on <02FE9938> (a java.lang.ref.ReferenceQueue$Lock)
    at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:111)
    - locked <02FE9938> (a java.lang.ref.ReferenceQueue$Lock)
    at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:127)
    at sun.java2d.Disposer.run(Disposer.java:97)
    at java.lang.Thread.run(Thread.java:536)
    "AWT-Windows" daemon prio=7 tid=0x0ACB1528 nid=0x63c runnable [aeff000..aeffd8c
    at sun.awt.windows.WToolkit.eventLoop(Native Method)
    at sun.awt.windows.WToolkit.run(WToolkit.java:253)
    at java.lang.Thread.run(Thread.java:536)
    "AWT-Shutdown" prio=5 tid=0x0ACB1158 nid=0x480 in Object.wait() [aebf000..aebfd
    c]
    at java.lang.Object.wait(Native Method)
    - waiting on <02FA4990> (a java.lang.Object)
    at java.lang.Object.wait(Object.java:426)
    at sun.awt.AWTAutoShutdown.run(AWTAutoShutdown.java:259)
    - locked <02FA4990> (a java.lang.Object)
    at java.lang.Thread.run(Thread.java:536)
    "Signal Dispatcher" daemon prio=10 tid=0x009E8350 nid=0x788 waiting on conditio
    [0..0]
    "Finalizer" daemon prio=9 tid=0x0003E978 nid=0x3f0 in Object.wait() [ab1f000..a
    1fd8c]
    at java.lang.Object.wait(Native Method)
    - waiting on <02F699B0> (a java.lang.ref.ReferenceQueue$Lock)
    at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:111)
    - locked <02F699B0> (a java.lang.ref.ReferenceQueue$Lock)
    at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:127)
    at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:159)
    "Reference Handler" daemon prio=10 tid=0x0003D548 nid=0x7a4 in Object.wait() [a
    df000..aadfd8c]
    at java.lang.Object.wait(Native Method)
    - waiting on <02F69A18> (a java.lang.ref.Reference$Lock)
    at java.lang.Object.wait(Object.java:426)
    at java.lang.ref.Reference$ReferenceHandler.run(Reference.java:113)
    - locked <02F69A18> (a java.lang.ref.Reference$Lock)
    "VM Thread" prio=5 tid=0x009E52C0 nid=0x974 runnable
    "VM Periodic Task Thread" prio=10 tid=0x009E7040 nid=0x4e4 waiting on condition

  • Not the average problem with wireless connection. Please help me..

    I've been having wireless connection problems ever since I upgraded to Verizon FiOS from Verizon Wireless. Before upgrading to Verizon FiOS in the fall of 2012, my brother's laptop connected just fine with the connection. After upgrading to Verizon FiOS, my brother's laptop could not connect to the internet. It showed the wireless connection signal as Excellent, but I could not access the internet. Either it would be extremely slow or there would be no connection at all. Also, the router would sometimes restart itself randomly, and it was extremely annoying for me since I am hardwired with my desktop.
    This was weird because my iPod Touch connected perfectly fine to the wifi. So I thought it must be the laptop. But I brought the laptop over to my cousin's house, who also happens to have Verizon FiOS, and the laptop connected perfectly fine. I called Verizon and none of the technicians knew what the problem was. We tried disabling and enabling the router, changing the channels, and anything that was on the list. They couldn't help me and I was extremely disappointed because not only am I not accessing the internet with my brother's laptop, but I am also paying for the service too. The last technician I called in 2012 decided to send me a new router. I hoped this would work, but it did not. This router, too, would completely reset itself numerous times before settling down and letting me use the internet.
    I gave up after that. But in the spring of 2013, I got really fed up with the service I was receiving and I decided to call Verizon again. Again, Verizon tried to help me fix the laptop with their tools and solution guides. But nothing good came out of it, so I decided to ask for a technician to come to my apartment to fix it. We scheduled a day and I was pretty excited since I was almost positive that the connection for the laptop would be fine by then.
    I was wrong. The technician came and only stayed for about 20 minutes. He said it must be the laptop or it must be that the walls are too thick in my apartment. But that can't be it since, in my cousin's house, the router is on the second floor and my brother was using his laptop on the first floor. So it couldn't be the laptop nor the house. So we came to no conclusion. He just attached a mini router to the laptop and hardwired it. I wasn't so content but I was glad my brother could finally use the internet now.
    About three months pass by and I decide to get myself a new laptop. I get it and I am hoping the wireless connection works. It did, so I was almost positive that it was my brother's laptop that was the problem, not the wireless signal. I go on vacation for a few days and I connect perfectly fine at my friend's house. When I return home and try to connect to my wireless connection, it didn't work!
    At this point, I am extremely frustrated. I decided to call Verizon again to replace my router because it was being extremely annoying. It kept resetting itself and I was tired of it. I replaced the router, and this is the router I currently have, but I STILL have the same problem. It resets itself on its own time and I hate it because I'm always in the middle of something. Wow, just wow. There is nothing they could do to help me fix this. I call up a technician, for the millionth time, and he tells me he can't access my router. This occurred with the previous technician who sent me the new router. He tells me his tools are not working and tells me he'll call me back the next day.
    It was the next day and I did not receive any phone call. I am extremely disappointed in Verizon FiOS' service and it's customer service. I leave it alone and I just hardwire my laptop to the router. Of course this works, but what's the point of having a laptop when I have to keep it hardwired on my desk? After a day or two, I decide to check if the wireless connection works, and it did. I was surprised. But every now and then, it would shift on and off. Most of the time, the wireless connection is either EXREMELY SLOW or I get none at all, nonetheless, it still says the connection is Excellent.
    Please, if there is anyone who could help or try to help me, I would most appreciate it. If there is more information that you need, ask me and I will try my best to provide it to you.

    Admittedly, that IS a strange case. Unfortunately, it sounds like all possible troubleshooting has been done by the tech support agents. you mentioned that you were dissatisfied with your other service, did it have a similar problem? theres a possibility of dirty fiber or a bad ONT port, but the random rebooting of the router would almost exclusively be a bad router. question: is the router in the same location as before?

  • Problem with Wireless N WRT300N please help?

    OKay so everything in router is up to date on its firmware the only problem is that everytime i try to connect to the router the signals keep on changing for example it maybe be 100% now and and a few seconds or mintes later it gets down to 40% or 20% and sometimes when the signal is 100% i am unable to connect
    Anyone have any of the same issues or  can anyone help me fix the problem?
    thankyou

    Well you are facing this problem due to some kind of Interference between your Wireless Connectiona and your Computer,thats why you loss the signal strength on your Computer.
    First try to upgrade the drivers of your wireless Card on your Computer. 
    Login to the Routers GUI, For Wireless Settings, please do the following : -
    Click on the Wireless tab...
    - Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...and then click on Save Settings...
    Click on Advanced Wireless Settings
    Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
    Now see if you can locate your Wireless Network and attempt to connect...

  • Need some help with Mail settings

    I need some help on what mail settings to use. Basically I want my Mac's Mail.app synced with my iPhone's mail.app and everything on the gmail server to be archived and have it so that i do not need to download all the archived emails that are on gmail to either mail.app, if anyone could help it would be appreciated.

    You are not alone. I can't get mail to work with our exchange server no matter what I do. I set Entourage up in less than 2 minutes by entering some simple information. I am using the latest versions of Leopard and Mail and it just refuses to connect.
    For instance, in Entourage I entered my user name, password and the exchange server name and that was it. Got my mail and it works great. Mail wants to know the SMTP server name? What SMTP server? No matter what information I put in that field it gives me an error saying it can'tr connect to the SMTP server. That is because it is an exchange server not an SMTP server I guess. Also, even when I enter the exact same information as I did with Entourage, mail refuses to connect with it saying to "check the connection". The connection works fine, as Entourage is having no problems sending or receiving mail. With Entourage there is a LDAP setting but no where in Mail can you enter what the LDAP server is. At least is doesn't use that terminology anywhere.
    What do you have to do to get Mail to work with an exchange server?

  • Need some help with ".png" image.

    Good day everyone. Here's the run down. I need to add an
    image (image "A") ontop of another image (image"B"). Image "B" is a
    paterned background. And Image "A" a logo with a transparent
    background.
    As it stands I have image "A" as a "png" and as you know....
    they are fri**ing huge! Haveing it as a "gif" only presents me with
    the IE6 problem of it adding a colored background to the image.
    So I'm stuck! Can any one tell me or point me in the
    difection of a tutorial to tell me the best way to add an image
    with a transparent background in Dreamweaver.
    Really need some help with this!
    Thanks all!

    >Right you can see the work in progress here>
    http://www.stclairecreative.com/DoughBoys_Site_Folder/home.html
    Before going much further I'd recommend reconsidering the use
    of a textured background. They are usually included for the benefit
    of the site owner only, and likely to annoy visitors. Studies on
    the subject suggest they often lead to usability problems. I do
    like to header graphic, but at 200K it's kinda heavy and can
    probably be optimized.

  • Need some help with guitar setup...

    jeez, never thought i'd be asking a question like this after playing for like 20 years, but i need some help with a guitar setup for mac. i'm gonna list out a lot of crap here that prolly doesn't affect anything at all, but here goes.
    Imac 17inch G4 - latest updated OS X... 10.4, or 5, or whatever. garageband 3.0
    digitech gnx-3
    alesis sr-16
    sure mic's
    yamaha e203 keyboard
    here's the setup:
    yamaha is on its own on a usb uno midi interface, sure's connected to gnx's xlr port, alesis connected to gnx's jam-a-long input, '87 kramer vanguard connected to gnx's guitar input. currently running headphones out on gnx to line in on mac.
    here's the problem:
    everything works beautifully, but my guitar sounds like crap. if i plug headphones into the gnx, it sounds beautiful. that makes me think its some kind of level issue between the gnx's output, and the mac's input, but nothing seems to fix it.
    by sounding like crap, i mean way too much bass. sound is muddy, blurry, not crisp... aka crap. i've tried altering both output and input on mac and gnx, and i cant get a combination that works. the gnx has a s/pdif out, can the mac accept that as input? might that help? short of running the gnx to my marshal half stack and mic'ing that, anyone have any suggestions, or use a similar setup?
    any help would be greatly appreciated!

    anyone? ... any suggestions? I think it might be an issue with the gnx pre-amping the signal as it goes out, and then the mac amping it on the way in, giving me a buttload more signal than i need, but since i cant find a happy level, i'm not really sure. i really dont want to resort to mic'ing my marshall... even with the volume almost off, my jcm900 is WAY too loud for apartment use. its not like i really NEED the guitar to sound perfect, i only use garageband to sketch out ideas for songs between myself and bandmates, but its really annoying to not have my customary crisp distortion. my bass player keeps telling me to use the built in amps, but, not to dis a practically free program, but the built in amps blow, at least after 10 years of marshall tube amplification they do. if anyone has any suggestions that might be helpfull on how i might resolve this, i would be your best friend for life and go to all your birthday parties

  • Need some help with sound quality

    Hi guys, new here. I'm working on creating an album on my own. Bass and vocals are real, everything else is using software instruments. I have about 8 songs done, but the problem is I don't really know what I'm doing as far as recording and levels go.
    I'm using studio headphones and everything sounds fantastic through them, and even pretty good if I just hook up some earbuds, but when I bounce out a track and burn them to do a disc and play it in my car, it sounds awful. Suddenly the guitar is too low, drums are too loud.
    I really need some help here. I'm even willing to pay someone to get me on the right track. Using paypal or whatever.

    AecDuck wrote:
    Where's the fun in that? Maybe you have different motives, but I got into home recording because I like doing things myself, even if I have to learn the hard way. If you know enough to get good bass and vocal recordings and mix that with virtual instruments, then you are well on your way to making a decent sounding mix. Mixing in headphones can be very deceiving. Things simply sound different in headphones. You need some monitors, even if they are crappy because if you can get it to sound good in crappy monitors it will likely sound good on other speakers.
    The fun and experience comes from getting a good balance that sounds good in headphones, and in the monitors, and in your home stereo, and in your car stereo. Use the different audio systems as a reference. If the drums are too quiet in the car, bring them up a bit. If the bass is too loud in your headphones, put them down a bit.
    If you bring in your recordings to be mixed by somebody else, first of all you're going to end up paying hundreds, if not $1000+ dollars, even in a sub-par studio. Secondly, it's never going to sound how you want it to sound. It's going to sound how THEY want it to sound.
    I know it takes longer, and it's hard work, but you will have such a tremendous amount of satisfaction when your project is done knowing that YOU recording it, and YOU mixed it on YOUR equipment. It will be 100% yours.
    Where's the fun? How about the fun in interacting with another human being? How about the satisfaction in having another validate what you've been trying to produce?
    I don't think it's helpful to make generalizations about what type of experience the OP might have in getting professional help. I have had good experiences working with mixing engineers, and perhaps I have just been lucky, but I've been able to produce music that sounded how I wanted it to sound, but at a level beyond which my skill at the time would have been able to produce, AND I gained some insights to help me in the future.
    It IS satisfying to teach yourself a new skill. And it takes a lot of patience, trial and error, and you might miss the mark more often than you hit it. If you're in a rush, it might be a viable solution to contact some studios and see if you can work with them. Learning from others is perfectly acceptable.

  • Help request - Could need some help with a logo for my site

    Hi I'm working on a project and i have come across a huge problem.
    please check out my logo on this site:
    http://www.tuxxen.com
    I have no idea how i should make my logo and  it seems like i have no skills to make one either,  i have been trying for days to make one that look decent but it end up looking really really bad each time.
    Could really need some help to get a nice logo up, the site im working on is about fishing, the name of this site will be changed to: Absolut mete. So the logo need to have this name.
    I have managed to make the layout for my site but i cannot make a logo its a bit funny really but yeah...
    Any help are very much welcome!

    THANK YOU/___sbsstatic___/migration-images/migration-img-not-avail.png so the tolerance makes it not care so much about the gradations in color? what else is tolerence good for?
    I have a cleaner copy now after someone suggested GIMP, so played with it last night - though couldn't figure out transparency - that was clear on converter- just not cooperative till these wonderful directions.
    So now I know how to do it without messing with the pic, and with messing with it - both good lessons and got a bit brighter color out of the deal.
    many thanks for the straightforward and clear directions, they worked perfectly/___sbsstatic___/migration-images/migration-img-not-avail.png extra strars for you/___sbsstatic___/migration-images/migration-img-not-avail.png

  • I am having some huge problems with my colorspace settings. Every time I upload my raw files from my Canon 5D mark II or 6D the pics are perfect in color. That includes the back of my camera, the pic viewer on my macbook pro, and previews. They even look

    I am having some huge problems with my colorspace settings. Every time I upload my raw files from my Canon 5D mark II or 6D the pics are perfect in color. That includes the back of my camera, the pic viewer on my macbook pro, and previews. They even look normal when I first open them in photoshop. I will edit, save, and then realize once i've sent it to myself to test the color is WAY off. This only happens in photoshop. I've read some forums and have tried different things, but it seems to be making it worse. PLEASE HELP! Even viewing the saved image on the mac's pic viewer is way off once i've edited in photoshop. I am having to adjust all my colors by emailing myself to test. Its just getting ridiculous.

    Check the color space in camera raw, the options are in the link at the bottom of the dialog box. Then when saving make sure you save it to the srgb color space when sending to others. Not all programs understand color space and or will default to srgb. That won't necessarily mean it will be accurate, but it will put it in the ballpark. Using save for web will use the srgb color space.

  • Need some help: my itunes won't sync with my iphone anymore. Both softwares are up to date and I've reinstalled itunes. After I reinstall, it syncs. But then when I reboot my computer, it no longer syncs anymore and I have to keep reinstalling itunes. Tho

    Need some help: my itunes won't sync with my iphone anymore. Both softwares are up to date and I've reinstalled itunes. After I reinstall, it syncs. But then when I reboot my computer, it no longer syncs anymore and I have to keep reinstalling itunes. Thoughts???

    thought that it was possible to have the same iTunes library on any machine that was authorised, a kind of cloud-iTunes I guess. 
    That would convenient, but sadly it is not the case. Sorry!
    Either way your welcome and best of luck!
    B-rock

  • Need some help in saving video message from viber to my Iphone. I disabled the thing that would save photos and videos automatically then, there comes a video I want to save. After loading and watching it, I press the "save to gallery"

    Need some help in saving video message from viber to my Iphone 5S with new ios 8's program . I disabled the thing that would save photos and videos automatically then, there comes a video I want to save. After loading and watching it, I press the "save to gallery" thing but it doesn't save in gallery. I tried all, restarting my phone, rebooting then turning on the save automatically thing and when I watch it again, it still wouldn't save.

    Probably a good question to ask Viber or look at their support site.

Maybe you are looking for