Huge Sized download taking place at port 8530 between clients and WSUS\SUP of secondary site

Hi Guy's
Need a solution to the issue, the SCCM 2012 clients under a secondary site { Secondary site with SUP\WSUS } are downloading 200Mb + data at port 8530. This seems quite abnormal.
Need to know answer of below
1- Actual size of catalog what clients should download or path where on WSUS is stored
2- How to restrict a huge sized download between WSUS and CM 2012 client
This is not the case where clients are directly reporting to Primary size.
Regards
Sushain Kapoor
Regards Sushain KApoor

Hi Jason
Just a little clarity, will the client download information for a particular product or all the products selected in wsus.
Eg: Windows 7 systems will download the catalog information of Windows 7 only against selections made in WSUS. Or it will download the windows XP and windows vista and other product information also. This particular question i am asking as i see only 300
updates as found in windowsupdate.log and not the thousands synced in WSUS
Is the update metadata exported using the wsusutil.exe the actual catalog size what clients are downloading
Regards Sushain KApoor

Similar Messages

  • FC Port Channel between UCS and MDS.

    Hi All,
    I am new to Cisco Fabric Concepts. In my enviornment i have a F port channel(8 Port Group) created on MDS 9513 switch and this Fport 
    channel is connected to Cisco UCS 6296 FI. The Cisco UCS Blade servers are connected to the Fabric Interconnect .
    On MDS NPIV is enabled.
    Can anyone explain the below questions.
    1. Why do we create an F port Channel Group and connect it to the UCS FI? Is this something similar to Brocade Edge to AG Switch Connectivity.
    2. How to configure F port Channel Group in MDS . Can anyone explain with an example.
    3. Do we need to make any Configuration on UCS FI ports for server connectivity and Channel port Connectivity if yes what are the steps required to 
    do the same.Does the WWPN shows up in the FLOGI Database if the connectivity and configuration looks good in UCS FI and MDS.
    4. What happens when a VSAN on MDS switch is added to the Port Channel.
    Thanks and Regards,
    Santosh surya

    Look at my remarks in
    https://supportforums.cisco.com/discussion/12468266/fc-port-channels-between-mds-and-ucs-fi-best-practice
    1. Why do we create an F port Channel Group and connect it to the UCS FI? Is this something similar to Brocade Edge to AG Switch Connectivity.
    F port channel is proprietary; therefore any such F port channel between UCS FI and Brocade doesn't work.
    2. How to configure F port Channel Group in MDS . Can anyone explain with an example.
    see eg.
    https://supportforums.cisco.com/sites/default/files/legacy/9/9/2/53299-UCS_1-4-1_F-port_channel-trunk-v1.pdf
    3. Do we need to make any Configuration on UCS FI ports for server connectivity and Channel port Connectivity if yes what are the steps required to 
    see eg.
    https://supportforums.cisco.com/sites/default/files/legacy/9/9/2/53299-UCS_1-4-1_F-port_channel-trunk-v1.pdf
    Does the WWPN shows up in the FLOGI Database if the connectivity and configuration looks good in UCS FI and MDS.
    flogi database is on the MDS, not FI; there are however UCS CLI commands, like "show npv ...."
    4. What happens when a VSAN on MDS switch is added to the Port Channel.
    If its not created on UCS, it will just not become the status "up"

  • What problems does one encounter when one attempts to download e-Books which are printed in German and purchased through German web sites onto an iPad purchased in the USA?

    What problems does one encounter when one attempts to download e-Books, which are printed in German and purchased through German web sites,
    onto an iPad purchased in the USA?

    No problem whatsoever so long as you have a German store account which can only be registered using a German credit card which is registered to a German street address

  • SAN Port Channel between 6120 and Brocade

    Has anyone setup or know how to setup a SAN Port Channel between 6120s and a Brocade FC switch? I know that it requires UCS firmware 1.4 but I don't know what the Brocade requirements are.

    The SAN port channel is Cisco proprietory. You cannot setup SAN port channel with Brocade. Sorry

  • Port channel between Nexus and Server is initializing

    Hi all, 
    I will need your help. 
    I have Nexus 5000, there is a POrt Channel between Nexus and Server, but one port always is in initializing.
    sh interface Ethernet101/1/27
    Ethernet101/1/27 is down (initializing)
      Hardware: 1000/10000 Ethernet, address: c8f9.f920.5b5c (bia c8f9.f920.5b5c)
      MTU 1500 bytes, BW 10000000 Kbit, DLY 10 usec
      reliability 255/255, txload 1/255, rxload 1/255
      Encapsulation ARPA
      Port mode is trunk
      auto-duplex, 10 Gb/s, media type is 10G
      Beacon is turned off
      Input flow-control is off, output flow-control is on
      Rate mode is dedicated
      Switchport monitor is off
    Any idea?
    Regards

    how many ports are you using in this port channel.
    can you paste the configuration of the channel ports and the interface.
    check the sh log if you are getting any log related to the port channeling.

  • On launch pad I have an un-named download taking place. how do I identify it

    I have an un-named down load taking place. How do I identify it and stop it?

    Open the Finder. From the Finder menu bar clilck Go > Go to Folder
    Type or copy paste the following:
    ~/Library/Downloads
    Cilck Go then drag that file from the Downloads folder to the Trash.
    If that doesn't help, copy paste the following:
    ~/Library/Safari/Downloads.plist
    Click Go; then move the Downloads.plist file to the Trash.
    Restart your Mac.

  • FC port channels between MDS and UCS FI best practice?

    Hi,
    We would like to create FC port channels between our UCS FI's and MDS9250 switches.
    At the moment we have 2 separate 8Gbps links to the FI's.
    Are there any disadvantages or reasons to NOT do this?
    Is it a best practice?
    Thanks.

    As Walter said, having port-channels is best practice.  Here is a little more information on why.
    Let's take your example of two 8Gbps links, not in a port-channel ( and no static pinning ) for Fibre Channel connectivity:
    Hosts on the UCS get automatically assigned ( pinned ) to the individual uplinks in a round-robin fashion.
    (1)If you have some hosts that are transferring a lot of data, to and from storage, these hosts can end up pinned to the same uplink and could hurt their performance. 
    In a port-channel, the hosts are pinned to the port-channel and not individual links.
    (2)Since hosts are assigned to an individual link, if that link goes down, the hosts now have to log back into the fabric over the existing working link.   Now you would have all hosts sharing a single link. The hosts will not get re-pinned to a link until they leave and rejoin the fabric.  To get them load balanced again would require taking them out of the fabric and adding them back, again via log out, power off, reload, etc...
    If the links are in a port-channel, the loss of one link will reduce the bandwidth of course, but when the link is restored, no hosts have to be logged out to regain the bandwidth.
    Best regards,
    Jim

  • LACP port channel between 6509 and Nexus 7K

    We are in the process of migrating from dual 6509's to dual 7010's.  We have moved our 5k/2K's behind the 7K and have layer 2 up between the 6509 and 7K.  This link is configured as a port channel with 2 1gig links using LACP.  The port channel is up and working and traffic is passing but it doesn't appear the load it equally distributed between the links.  Both the 7K and 6K are setup for src-dst-ip for the load balancing.  The links have been in place for over 12 hours and I would have expected them to "equal" out.  Has anyone had this issue in or is this to be expected?  For clarification there is not VPC inolved in this configuration it is simply a port-channel between one 6509 and a 7010.
    Thanks,
    Joe

    We are in the process of migrating from dual 6509's to dual 7010's.  We have moved our 5k/2K's behind the 7K and have layer 2 up between the 6509 and 7K.  This link is configured as a port channel with 2 1gig links using LACP.  The port channel is up and working and traffic is passing but it doesn't appear the load it equally distributed between the links.  Both the 7K and 6K are setup for src-dst-ip for the load balancing.  The links have been in place for over 12 hours and I would have expected them to "equal" out.  Has anyone had this issue in or is this to be expected?  For clarification there is not VPC inolved in this configuration it is simply a port-channel between one 6509 and a 7010.
    Thanks,
    Joe

  • Port-channel between ACE4710 and switch

                   Hi all,
    I have configured port-channels on ACE and switch. Full-duplex and speed 1000Mbps are set on both sides. The configurations of port-channel on both sides is same. But there are output drops on the switch. See:
      Last clearing of "show interface" counters 00:31:24
      Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 536
    Why there are output drops on the switch? There is no half-duplex and both sides have the same speeds.
    Thank you
    Roman

    Hi Roman,
    Please paste the configuration of the ACE and Switch
    Cesar R
    ANS Team

  • I have attempted to update my version from 5.0 (yahoo ver 1.8) to 6.0. the download takes place, i close the browser, reopen and i get a messge that advises me to update my version. when i check the version, it remains version 5.0

    windows xp professional, sp 3, mozilla version 5.0, yahoo edition 1.8

     Hi,
    One of my ex-colleagues has installed a NI-DAQ 6.5 in our system. [And I do not see any other naitional instruments card in the CPU of the computer, may be he removed it] I deleted the account and all his files in the system. When I am trying to install version8.0, its not getting installed and giving me a message that I should uninstall the previous version by going to Add/Remove programs in the control panel.
    I tried doing that, but the "Change/Remove" button does not seem to work...[There is no response and so unable to install the new version...]
    Any idea how can this problem be solved?
    It is a windowsXP operating system with SP2 installed on a machine with P4 processor.
    Thanks

  • No Air Port connection between MacBook and Time Capsule

    I having problems getting a MacBook connected to the internet via Airport. I have a Time Capsule set up a DSL modem and My Windows machine (IBM on XP SP3) is working fine via an Ethernet cable (although a secondary issue is that if I try to alter the settings on the Time Capsule via the AirPort utility I get an error: "An error occurred while trying to access the Apple wireless device. Make sure your network connection is valid and try again. Error -6753").
    The MacBook has completed a full back to Time Machine but I'm having difficulty getting internet connectivity.
    Not sure what I'm missing here, I'm a Mac newbie so it's fresh territory and some help would be greatly appreciated.

    My own diagnosis is that the modem is not compatible with time capsule but I'd like to have a confirmation on this.
    It would really help us if you could provide the manufactuer and model number of your modem.
    it's possible that another user reading this post may have the same modem and be able to help, or we can check to get specifications and support documentation online if we know what you have. As of now, I'm afraid that we know nothing.

  • Where is radius/tacacs communication taking place

    hello,
    if iam logging in to a domain, and my domain is configured for an authentication to an ACS, where is the radius/tacacs communication taking place?
    - is it from client to ACS
    - or is it from domain to ACS

    Depending on what device you are authenticating against - normally it would be client->Device->ACS->Domain
    HTH>

  • Error 1500-Failed Download of Adobe Reader due to another Installation taking place.

    I just bought a new desktop and I was trying to get the User Manual for it but I needed to download Adobe Reader in order to get the manual..  I tried to install Adobe twice and each time I've recieved the same Error message..  ERROR 1500:Failed download due to other installations taking place at the same time. Finish downloads then finish Adobe download..  Something to that effect..  Anyways, I tried to re-install Adobe agian thinking that it was just a fluke, but, recieved the same message again...   UGH!!  HELP!!!!

    I was able to uninstall using that link.  Now I’ll need to re-install something…will try
    Best Regards,
    Reed Richerson
    [private data removed]

  • Content Transfer between WSUS and SCCM client on port 8530

    Dear All
    In my environment from last few days we are facing an strange situtaion where huge contents is getting transferred between WSUS server and SCCM client on port 8530.
    I check logs on client and found that client are getting contents from their associated DP's but still weekly network utlisation report showing that data in GB's was transferred between SCCM primary server and clients on port 8530.
    Kindly suggest what else need to check in this scenario
    Regards Suresh

    The only other possible traffic from WSUS is actual updates if and only if you have been approving updates directly in WSUS which you should not be doing.
    Thus, assuming you are not doing what you should not be doing, the only possibility is the update catalog. 150-200MB sounds excessive but that will be based upon what you all have selected for your catalog. There are also a handful of reasons why a full
    catalog resync would be initiated instead of just a delta.
    Jason | http://blog.configmgrftw.com

  • Income tax dedcution is not taking place on medical reimbursement .

    Hi SAP-HR Experts .
    I am facing a issue that for few employees Medical Exemption for incomeTax is not taking place for few employees ,
    like upto Rs. 15000/- amount annually are exempted for Income Tax .
    a employee whose exemption is taking place /3m1 wage type generated , while for those employees for which exempted for Income Tax in not taking place /3m1 is not generating .
    IT-589 is maintained , and having amount 2MER(Medical reimbursement wage type) .
    IT-267 is also having entry for Off-cycle Payment .
    Emp X , having IT-589 , 2MER : 16,200 , for the duration of 01.04.2008 to 31.03.2009
    for the month of May-2008 , He claims Rs. 1395.00 .
    He has both wage types 2MER = 1395.00 and /3m1 = 1395.00  .
    Employee X is correct case .
    Emp Y : is wrong case where tax exemption is not taking place .
    having IT-589 , 2MER : 30,600.00 , for the duration of 01.04.2008 to 31.03.2009
    for the month of May-2008 , He claims Rs. 2086.00 .
    He has both wage types 2MER = 2086.00 and /3m1 is not here  .
    what is required in ordfer to correct this wrong case (Employee - Y) .
    Thanks & Regards : rajneesh

    Hi Sikinder.
    I have checked the Log of payroll both Correct case 'Emp-X' and wrong case 'Emp-Y'
    Both emps are of same department and same location .
    incase of Emp-X , Payroll-function INMED generates /3m1 wage type
    while in case of EMP-Y it is not generating .
    Why this is happening and how to correct it ?????.
    Regards : rajneesh

Maybe you are looking for