Hugh problem: I have to edit a video in 2 days and I can't get it captured
I click: log and capture and it says: no communication.
I can see the video on the preview, but if I click capture now, it says:
general error
Hi fcpi-
Greetings and welcome to the Apple boards.
In addition to the other questions, via which bus, FireWire or USB, is this device connected?
Luck-
-DaddyPaycheck
Similar Messages
-
I am having problems setting up airport extreme.
What ADSL modem do you advise to use with my new airport extreme? I have tried a basic TP-Link ADSL2+ modem and I can't get the configuration working. What modem does Apple recommend?Ok well I have looked around some more and have found this to be the most up to date official response to my question as seen at this link here:
http://www.actiontec.com/support/product_details.php?pid=41#q27
Can I Bridge the Actiontec MI424WR router that Verizon provided, when I signed up for FiOS service?
The MI424WR does not have a bridging option, and neither Verizon nor Actiontec support attempting to bridge it.
The desire to bridge the MI424WR is based on a misunderstanding that it is a modem as well as a router. Actiontec does produce DSL Gateways that have a Transparent-Bridging option, which bypasses or disables the router function and allows the Gateway to act simply as a DSL modem, when it is enabled. Many consumers do not realize that with FiOS, the ONT (typically outside the home) is the device that handles changing the FiOS signal from Fiber to either Ethernet or Coax, and that the Router is just a Router, and if it was bridged or bypassed, it would be a device without a function. For most Verizon FiOS customers their service would completely stop if the MI424WR was bridged, because the Video on Demand service is dependent on it to work.
If your ONT is connected to the Actiontec MI424WR router via Coax, the MI424WR is required due to the Coax connection. But if the ONT is connected to the MI424WR via Ethernet, then in most cases some other router can be substituted for the MI424WR, and it can be removed."
So it looks like I will be calling Verizon support to see about getting the Ethernet connection installed and getting another modem... -
I have a toshiba lap top computer with vista and I can not get my new iphone to connect all the way .... it says "connected with limited activity". which means I don't get on. Any help would be appreciated. Thanks.
Hi all,
Guess I understand what is going on as I'm also experiencing the problem.
Basically the issue is about the iPhone 4's personal hotspot.
I'm trying to hook on personal hotspot to my toshiba laptop but it couldnt work as the connection is limited to local only without Internet access.
The hotspot works well on other laptop and I-devices, but not my toshiba...
Hope to get assistance here. Thanks -
Ive just updated my iPhone4 to the IOS5 software and i have lost all my apps? why? and how can i get them back?
When an iPhone updates, it wipes the whole device clean and then reinstalls the software and then the backup. Obviously you didn't create/couldn't create a backup either via iCloud or iTunes. You can get your apps back when you go to App Store>Updates>Purchased and download the apps you want.
-
What have happened to my Junk folder, it disappeared and I can't get it back.
What have happened to my Junk folder, it disappeared and I can't get it back
POP mail.bigpond.com and my supplier is Telstra
So how can I get my junk folder back and why did it disappeared? Now the e mails and ads are marked as junk but I have to delete them manually as there's no junk folder. -
I had quite a few notes in the 'Notes' app. I suddenly find that all of them, except 3 have disappeared. What could be the reason and how can I get my notes back?
Not fully au fait with iCloud. I don't use it. But if you have done a backup to iCloud then this might help. This reply will refresh your post thereby giving others an opportunity to comment. Meanwhile, read up about iCloud in the User Guide. Here's the link to download it - http://support.apple.com/manuals/#ipad
-
Since I updated my Iphone to IOS 7, I have lost all calender entries oin my phone and it won't sync calenders on iitunes. Anyone have this problem?
I believe anilsudhakaran meant sign out and in with your Apple ID for iTunes.
Also, do a hard reboot of your phone. I know that always helps me.
This doesn't delete anything
Google how to do it if you are not sure how to do it. -
I installed Firefox 4 beta when it was available as a tester before Firefox 4 was released, so I had two versions of Firefox on my computer. When Firefox 4 was released this week, I installed it and it replaced Firefox 3.6.15. For some reason it seems it didn't install the full version of Firefox 4, instead it's a similar version to the Beta version. For example, the drop down on Google search doesn't work when you click on an item in the drop down. Also the orange button that is supposed to replace the buttons on the top left of the browser is not there. It still has the 8 buttons, ie File, Edit, etc. How can I get the full version to install on my computer? I've tried uninstalling and reinstalling it and I get the same result. My computer runs Windows XP Media center Edition OS. Please advise me on how to fix this. Thanks.
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
I also have a question. Have you ever been able to access these sites from the Firefox on that computer? -
My "select, edit.."are white out and how can I get to reset them back so I can edit my photos?
My "select, edit.." some are white out and I can't edit my photos. How can I reset it?
What application?
What exact version of that application?
What exact version of your OS?
~~~~~~~~~~~~~~~~~ ~ ~~~~~~~
Are you by any chance on Photoshop Elements? If so, you're in the wrong forum. This is not the Elements forum.
Here's the link to the forum you want:
https://forums.adobe.com/community/photoshop_elements/content
~~~~~~~~~~~~~~~~~~~~~~~~~~~
Otherwise:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
I have a message on my Ipad that says there hasn't been a back up and when you puch ok to get rid of it, nothing happens, and you can't use any other buttons either?
Reset it by holding the power and home buttons at the same time until you see the Apple logo, then release.
-
I have tried to install Adobe flashplayer several times and I can't get to my project on shutterfly
I have tried to install Adobe flashplayer several times and I still can't get to my project on shutterfly, it keeps telling me I have to install Adobe. What am I doing wrong?
http://forums.adobe.com/thread/1195540
-
I am trying to edit some of the surveillance videos taken from our dLink camera of the dogs playing when we are not home, but when I import the .avi files, it always just goes to the audio portion (of Premiere Elements 11) and nothing shows up as video. What am I doing wrong? Please know, I am completely new at this program, since I bought it for the purpose of playing with my dLink home camera videos and haven't been able to do a single thing with them as of yet due to how they are importing. I did "get media" from my Bloggie camera to see if that worked, and it did come across as a video and not just audio, so I am not sure why the other isn't working.
ATR, just to make sure you understand me, all my video clips in my folders appear as the first frame of the video clip when I view my folders as (small, medium, large)icons instead of lists, when saved as .avi files but when saved as .mp4 files, those icons display as a graphic icon of filmstrip with a musical note on it. I do have various other methods to open with (quick time, windows media, winamp or real player) but prefer real player because I like it's quick and easy trimmer that comes along with it, since so many of my videos are just pet antics where you need to clip off the boring beginning and ends of the video.
I did go on a few of the icons and right clicked, Open With, and tried quick time and also Windows Media and it did nothing as far as how the file was saved for display, and they opened the same no matter which player I used...the actual video opens and plays right at it's first frame... but it's the way it is visually displayed in STORAGE that bugs me because it isn't immediately apparent to me what it is a video of (weddings, outside the house, pet antics)... it makes me have to actually title things and read titles where before I let it just be dates because I had the visual of that first frame as a reference. Obviously, this is a problem for unedited videos only, as anything I actually work with, I do give a title along with the date of the video.
I also just realized this seems to be the way ALL videos that are wrapped in .mp4 are displayed, as my bloggie camera's videos appear the same way. Now I know why! My other videos display as .avi's so I see the frame. Puzzle solved. Guess I'll just have to learn to live with it, as it seems to be how things display with the various formats.
Now I need to watch some tutorials to learn how this Premiere program works! It's all new to me, since this is the first time I've been able load any of my videos onto it. I haven't even been able to figure out how to trim on it yet! -
Help Hotmail wont setup on my IPHONE 7 OIS7 used to work now it won't setup.
If you have two-step verification turned on in Hotmail, you'll have to log in with a browser and turn it off.
-
I have downloaded several apps for my iPod touch and I can't get them to sync to the ipod
I have several apps in my iTunes acct and I would like to sync them to my child's iPod touch. On the apps page of my library, it lists them as installed but they will not sync to the iPod.
If they are listed as 'installed' (as opposed to 'will install') then that implies that they are on the iPod. Do they show on the screen mock-ups on that Apps tab on your computer's iTunes, and you've checked the actual homescreens on the iPod ?
And you've tried ejecting the iPod from the computer and doing a soft-reset of the iPod to see if they show after the iPod has restated ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the equivalent of a reboot. -
HT202159 I have an update that appears to be stuck and I can't get rid of it. What do I do now?
I have an update that is stuck in the middle of installing. I tried force quit and it won't work. Help!
Click here and follow the instructions, or if they don't cover that type of adware, these ones. If you're willing to use a tool to remove it(you don't need to, but may find it easier), you can instead run Adware Medic; this link is a direct download.
(120472)
Maybe you are looking for
-
SQL-tab / refresh button: does not take into account renamed constraint.
I discovered a small bug: 1) find or create a table with system generated constraint names (SYS_C007289) 2) open that table in SQL Developer (I'm using 3.0.04.34). On the constraints tab, there will be the SYS% constraints. On the SQL-tab, the constr
-
How it is possible to synchronize several calendars
-
Get error 66, when try to make labview program communicate with arduino uno+ wifi shield.
I have a sever VI, keep sending data use TCP VIs. The client side is my arduino board (uno+ wifi shield), which can receive data wirelessly. I run both, they can successfully communicate once. At the 2nd time, the sever VI will close itself, because
-
Using iMovie 11 and can't insert photos into story line?
I just got IMovie 11 and the browsers won't highlight when trying to create a movie. I can't insert photos into the storyline
-
When will you update E7 Software ?? ... we need a new update ... with a new application .... the symbian Belle Refresh hasn't add enough . .... i can't open the groups on facebook with facebook app .... we need a new social application with chat lik