Hulu desktop on new mac mini

I very recently upgraded my mac mini to the new "early 2009" edition and i'm quite satisfied with the power it delivers. however, since my mini is a media center, i used to enjoy hulu and boxee desktop for tv on demand. Over the last 4 days and shortly after upgrading my mini; hulu desktop gives a black screen after its "starting..." message. nothing else happens.
Has anybody experienced the same problem as mine with their new mini ?

It appears that the 9400M graphics takes a piece of the RAM depending on how much is available. If the 120GB model has 1GB of RAM and 128 MB of VRAM and the 320GB has 2GB of RAM and 256 MB of VRAM, why wouldn't upgrading the mini to 4GB give us 512 MB of VRAM?
My Crucial RAM kit is a day or two away, so I am going to either find out here or find out the hard way -- provided I have the guts to make the putty knife do its thing!

Similar Messages

  • I'm attempting to transfer files, address book, etc from an external hard drive to my new Mac-mini using migration assistant.  The external drive is showing up on my desktop but Migration Assistant is not seeing the drive when searching for devices

    I'm attempting to migrate files, address book, maile, etc to my new Mac Mini using an external hard drive and Migration assistant.  I followed the instructions on using Migration Assistant to do this but Migration Assistant is not seeing the external drive, which is displayed on my desktop

    I've been chasing this problem all afternoon. I had to reformat my internal drive on my MBP and reinstall Mountain Lion   Start up assistant wouldn't see my extrnal drive with the Time Machine files on it.  After many tries, I skipped the restore there and let the system boot.  I could see my external drive from Finder and the files looked OK.  I was told to use Migration Assistant and it had the same problem.
    I saw a hint on one of these posts that the icon that you see and is label Macintosh HD is actually your backup disk and it is telling you that it has a copy of your internal Macintosh HD.  I went ahead and told it to continue and it started to restore my apps, settings, and documents.  It's been going for a couple of hours, and is close to being done.  I expect to see my old system restored when it is finished.
    Wish that Apple would put some type of note that it is seeing the backup. That is most confusing and seems to be a problem for lots of users.
    It's been a month or so since your post  Did your get it to work?

  • Brand new Mac Mini,  No Maciintosh hard drive icon on desktop

    How do I get the Macintosh HD to show up on the desktop. Brand new Mac Mini 10.6.2.
    Without the HD icon I have no access to the applications directory.

    Use the Finder menu 'Preferences' - 'General' tab.... 'Show these items on the desktop: [√] Hard disks'

  • Spotlight is not working on brand new Mac mini

    Hi,
    I got an issue with two brand new Mac minis running 10.7.3 (11D50d):
    Spotlight is not working. I'm only getting the Wikipedia-Search.
    Here's what I did:
    Installation:
    - took the stock Minis and set up two users, admin and user (limited account)
    - updatet the System
    - installed manually: Adobe Reader X, Office 2011, Firefox 12, Flip4Mac, Perian, Cyberduck, Google Earth 6.2 (the installer without the updater), VLC 2
    - installed using AppStore: CalendarBar, TextWrangler, Unarchiever
    - copied a few documents (Word and Excel files) from a PC to the Desktop
    Troubleshooting:
    - tried to restart Spotlight by adding the entire harddrive to privacy using »Spotlight« within the System Preferences
    - that threw an error "no priviliges"
    - started the System from the recovery system (on an USB-thumbdrive) and repaired permissions
    - that did not help
    - tried to restart Spotlight through the Terminal, running the command: sudo mdutil -E /
    - that command returned: No index.
    - the tried: sudo mdutil -i on /
    - returned: Error: unable to perform operation.  (-400) No index.
    - went the hard way
    - unloaded the daemon: sudo launchctl unload -w /System/Library/LaunchDaemons/com.apple.metadata.mds.plist
    - erased the Spotlight folder: sudo rm -fr .Spotlight-V100/
    - loaded the daemon: sudo launchctl unload -w /System/Library/LaunchDaemons/com.apple.metadata.mds.plist
    That made everything work fine until I did a restart of the System. After the mini restarted I was back at square one...
    Does anyone have an idea how to fix this issue?
    Apple support suggested to reinstall the system. Something I can't do right now, as people need to work on those computers and cannot take a tow hour break...

    Hi Ray Land,
    We can help narrow down the cause.  What operating system are you using on your new Mac Mini? 
    If you are running the Mountain Lion OS, you can download the latest driver here.  An important note is that the current print queue must be deleted before installing the new driver.  This will ensure proper communication.
    If this doesn't work or you need further assistance, please contact us here.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • How do I install Windows on a new Mac Mini (w/o optical drive?)

    The new Mac Mini does not have an optical drive and I would like to install Windows with Parallels Desktop 6
    Any ideas?  Can I put the iso on a USB drive or mount a NAS?
    Thanks for ay help!
    Enzo

    You can burn an ISO of a bootable disc back to a DVD, but not to a USB device. I don't know if Parallels is able to install from an ISO, but it may install from an external drive. This is why you should read the documentation for Parallels or ask at their tech support site.

  • New Mac Mini and Repairing Permissions

    I've been having trouble with my Mail program and thought I would repair permissions to see if that would help. I ran disk utility from my internal hard drive and ran repair permissions. Apparently it found several permissions to repair, so I thought I would run repair permissions again and the same list appeared. Running a third time and the same list appeared again.Do these permissions ever get repaired? What do I do from here? Should I repair permissions after booting up off of my original system disk? This Mini is only a couple of weeks old and I'm already having problems with Mail and repairing permissions.
    rskover

    Thank you Tim but the computer is packed back waiting for TNT to take it back to Apple. I don't have time to play with permissions, the permissions are OK in the old computer.
    This is what may have been your problem. The permissions on your old computer may not have matched the new computer. I think you gave up before the penny dropped.
    They sell the computers very expensive and I think they would have to improve quality.
    I am unsure how that can be one of your gripes as when the cube came out it was way overpriced in comparison to their other desktops. That did not stop your or I getting one then.
    Your issue was a software problem not a hardware problem so no matter what kind of mac you had it would have needed troubleshooting.
    The quality of the new mac mini far exceeds that of the cube. Try playing 1080P high definition media on your cube, or even 480P for that matter. Try outputting 5.1 surround sound from your cube without the addition of a firewire audio interface.
    I know how frustrating it can be when something just does not seem to work. I have encountered this a few times in my work. However sometimes I just have leave it come back with fresh eyes and try other approaches and I succeed.
    What you need to appreciate installing an upgrade should be planned for any eventuality. In business upgrades are scheduled to have the minimum impact on the workplace. That being said I have worked 48 hrs solid over a weekend getting systems up for a monday morning. They are not always straightforward.

  • How do I pair my new Mac mini (mid 2011) and white Apple Wireless Keyboard (2003)?

    I just bought a new Mac mini (mid 2011) and can not set it up via my Apple Wireless Keyboard (2003). I'm disheartened but not surprised that my Bluetooth 4.0 Mac isn't backwards-compatible with my Bluetooth 1.0 keyboard. But I can't find any documentation confirming the fact that my non-paired, but tested & perfectly functioning keyboard will not work with current Macs.
    I was however, able to locate a tech support doc (http://support.apple.com/kb/HT4112) that mentions my Apple Wireless Keyboard (2003) is not compatible with iOS devices. (Which is not critical because iOS provides a non-physical keyboard. Aside, it would be lovely were Apple to add a non-physical keyboard to Mac OS X, if only so new desktop owners can continue to set up their Macs in a pinch.)

    I just bought a new mini mac (lion 2011) with a wireless keyboard.  I could not get the mac to recognise the keyboard.  Spent several hours back with the Genius team who replaced keyboard and mac but did not get anywhere.  They gave me a wired keyboard, was able to configure the mac and then it recognised the wireless keyboard.
    Seems this is a problem with the new mac/OS

  • When I replaced my PC desktop with a Mac Mini and hooked up my HP printer to it, I discovered my other computers on the Wi-Fi network could no longer access the printer.  The manual says Maverick OS will not allow PC's to access the printer. Any thoughts?

    When I replaced my PC desktop with a Mac Mini and hooked up my HP printer to it, I discovered that my other computers on the Wi-Fi network could no longer access the printer.  The manual says Maverick OS will not allow PC's to share the printer. Does anyone else have this problem?  My printer does not have on-board Wi-Fi but, otherwise, works fine.  I shouldn't have to buy a new one.  Is there a OS patch out there that would open the printer port for my PC computers?

    I'm assuming that on the Mac, the System Preferences -> Sharing -> Printer Sharing -> [X] HP printer -> Everyone can print is selected?  That is to say, the Mac will allow anyone to print using the printer, and that you did not try to restrict who can print.
    How is your network configured?  Bonjour as a protocol will NOT cross a router boundary.  If you have 2 or more subnets active with the PCs on one subnet and the Mac on another, that would block the PCs from seeing the Mac.
    You could have multiple subnets if you have more than one router, such as an ISP provided broadband modem/router and another WiFi Router.  If the PCs are talking to one router and the Mac is talking to another, that could be a 2 subnet situation.  The additional routers must be put into bridge mode, which is done differently depending on the router.  But the basics are to diable DHCP and NAT services on the secondary router(s) having just one active router on the network.
    Also, using Bonjour Browser on my Mac, it is showing me that the printer is being advertised as using Internet Printing Protocol, so if that is something selectable on Windows, maybe you can bypass Bonjour on Windows.

  • Can the new Mac Mini boot Snow Leopard from an external hard drive?

    I currently boot my 2009 Mac Mini from a FW800 external drive with 10.6.8. If I just plug my external drive into a new 2011 Mac Mini, will it boot into Snow Leopard if I set it as the startup disk or will I get a kernel panic?

    I bought a 2011 Mac Mini, which came with Lion installed. I thought maybe I could repartition it and have a Snow Leopard partition. So I repartitioned it (500gb split into two 250gb partitions). I named the new partition "SnowLeopard" just to make it easy for me to tell the difference.
    I attached the external DVD and put in a Snow Leopard installer disc, holding down the C key so it would boot and install from that, but it just spun for awhile. Doesn't appear to work.
    Then I read somewhere else that someone had managed to clone a copy of Snow Leopard onto an external drive and boot from that. In their situation they were talking about a MacBook, but the principle seemed sane.
    So I rebooted, holding down the T key to put the Mac Mini into Target hard disk mode, and attached it via Firewire to another MacMini (circa 2008 or so, not sure of year, but it was upgraded last year to Snow Leopard and has been upgraded along and along). Then I used Carbon Copy Cloner to copy Snow Leopard (that is, the entire hard disk-- System and all applications and data) to my newer Mac Mini's "snow leopard" partition.
    For yucks, when it was done cloning, I restarted the older Mac Mini, and had it boot from the newer Mac Mini's snow leopard partition--- it worked! To make it easy to tell the difference, I changed the desktop background to something completely different. I think I tried booting from Lion but I can't remember if that worked.
    Then I rebooted the newer Mac Mini, which booted up in Lion, of course. Going into System Settings, I changed the startup disk to the "snow leopard" partition, and rebooted, and it booted up in Snow Leopard.
    I have yet to test the applications on the Snow Leopard partition. Another problem has arisen.
    Because with both of the Mac MInis being active on the network, they both had the same computer and user name. So I renamed the newer Mac Mini to something completely different, and changed the password.
    Unfortunately, now I cannot change any other setting in the System Settings that requires a password. While the newer Snow Leopard lets me log in with the new user and new password, whenever I try to click the "lock" icon to change something, I'm prompted for a username and password. Apparently this is some different username and password than either the new or old username/password.
    I've tried various combinations of both: new user/old password, old user/new password, old user/old password, etc.
    So if you do what I've done, be careful about changing the username and password on your cloned computer. I think it may be wiser to create a new user and then delete the old cloned users. I may just have to re-clone the old Mac Mini to the new one again.
    If anyone has any ideas about this password conundrum, please pass along!

  • How do I connect wirelessly to my new mac mini from my macbook pro

    Hi, I've just bought a new mac mini, its connected to my HDTV via the HDMI cable....it is showing as it should on my tv screen....but my question is: how do I connect to the mac mini via my macbook pro? I want to be able to control the mac mini wirelessly from my laptop, as the mac mini is going to essentially run my home theatre.
    Thanks in advance
    Matt

    Use Remote Desktop
    https://www.apple.com/remotedesktop/
    or by screen sharing
    http://macs.about.com/od/usingyourmac/qt/Mac-Screen-Sharing.htm

  • How can I install Jam Packs on a new Mac Mini?

    I've a lovely new mac mini, but the little bugger has no disk drive.  I migrated several jam packs over from my old mac mini only to get a troubling error message requiring tht I reinstall the jam packs.  Alas, they refuse to be installed from a network drive using CD/DVD drive sharing. What's a homie to do??

    Hi jwmvtiel,
    Please follow the article: CC desktop lists applications as "Up to Date" when not installed to resolve your issue.
    Let us know for further issues.
    Regards,
    Ratandeep Arora

  • Transfer old MacBook Pro files to new Mac mini via wifi stuck

    I'm going through the setup of my new Mac mini.  The first thing it is having me do is transfer old data and applications via wifi from my MacBook Pro (running snow leopard) it is taking forever (over 24 hours now) and apparently stuck.  How do I stop and restart the transfer using Ethernet cable or FireWire to speed up the transfer process. This is a brand new mini running some version of mountain lion. Thanks!

    How are you transferring the files now?
    To me the easiest, most reliable, and generally fastest method is..
    With both computers powered down connect them back to back with a firewire cable
    Boot the old computer into Firewire Target Disk Mode by holding down the T key during boot
    Boot the new computer and the old computer should appear on the desktop as a firewire drive
    On the new computer launch Migration Assistant (found in /Applictions/Utilities)
    Follow MA's on screen prompts to transfer the data from another disk drive (the old computer running in Firewire Target Disk mde) This last step is best performed during the initial setup of the new computer when prompted early in the initial setup phase

  • My new Mac Mini

    I just got my new Mac Mini the other day and my first observation is that the fan is dead quiet and the unit doesn't get even hot. Fantastic!! I've copied my applications and files from my Mac Pro desktop and I'm ready to connect it to my projector and receiver. I have some questions:
    Which video output should I use, the mini DVI or the mini DisplayPort? When I had my Mac Pro desktop connected to my projector (Marantz VP-11s2), I used a DVI to HDMI adapter to a HDMI cable. The Mini came with a mini DVI to DVI adapter. Should I use it instead of maybe the new mini DisplayPort to HDMI adapter from Monoprice?
    Thanks!

    i go to an hdmi projector input and have tried both video outputs and dont see any difference. i use the 1280x720 resolution.

  • New Mac Mini sends airplay audio but does not receive it

    I just purchased and set up two new Mac Minis with Mountain Lion. Previous to this, using Lion and even Leopard, I could send Airplay audio to any of my desktop machines. Further, my iOS devices could send audio to my Macs running Snow Leopard and Lion. The new machines do not receive airplay audio from anything. They can send to the other devices, but not to themselves. Had I upgraded all of desktop machines to 10.8, I wouldn't be able to send audio anywhere.
    Why is this?

    From what I'm reading, airplay is only for streaming to your tv.  I have apple tv and have never been able to stream from one device to another;  only from device to tv.
    Can you link to an apple document saying it's supposed to work computer to computer?  Are you sure you weren't using home sharing in itunes?

  • New Mac Mini - Dock Disappearing

    I just got a new mac mini and I am using it as a media server. I am controlling through screen sharing and sometimes with air mouse. Other than that, nothing strange as far as applications running or downloaded.
    Several times now, the dock has disappeared. I cannot click on the desktop or the Apple icon in the top left corner - but the application windows that are open continue to work - iTunes and Safari.
    I have tried several combinations of disconnecting air mouse and screen sharing, but nothing seemed to effect what is wrong.
    Any suggestions as to what is wrong?

    I suspect the applications at hand could be crashing... It could be a RAM problem.
    Slide your Leopard/Snow Leopard disc into the drive and hold D when booting to start the Apple Hardware Test.
    Good luck!
    ~Yoma

Maybe you are looking for

  • Get all values from request.getParameter

    In ASP, I can do something like that... For each item in Request.Form Response.write "Name is:" & item & " value is:" & Request(item) Next How about in JSP? How do i get the names and values of the form using a loop?

  • Declare @StartDate/@EndDate in SQL View; cannot save (for use w/ ODBC)

    I have searched all over to find out how, in proper syntax, to code a date range-specific query that works just fine in SAP, but cannot be saved in a SQL view (to in turn be linked to an Excel spreadsheet).  An answer that links me to the proper thre

  • Open Transfer Requirements - Fixed Bin replenishment

    We have a situation where TR's remiained open for lack of stock in source Storage types. When these Tr's are closed as completed, they re-appear due to min/max. It is being cumbersome to check each TR if this was due to LP21 or a genuine TR. could so

  • TCP Listener returned error on accept = AFP blows up. Need help

    Environment: 10.6.7 Server. Xserver. All Mac clients. It's a school. Problem: AFP refusing connections or not loading the Home Directory Symptoms: Library/Logs/AppleFileService/AppleFileServiceError.log blown out with "TCP Listener returned error on

  • PHD Sync stopped working - "SyncSet name in use"

    I've started using PHD successfully yesterday and today it stopped working. The tool bar control says that the "Home Never Synced" Any suggestion on how to get it to start the sync process again? Here is my log file: 1:: [10/10/29 10:51:32.143] _inco