HUM 1.2.0 - Unable to Purge Quick Reports

Hello,
When I goto HIM -> Admin -> Purge Details, it shows 'Next Data Purge job scheduled at: -'. Even though I have set the purge for Quick report to older than 3 days, yet the quick reports folder has files dating back month and a half. How can I ensure the purge policy does execute as configured.
Thanks.

Send a screenshot of the HUM -> Admin -> System Preferences -> Purge Details before making changes.
1. Go to HUM --> Admin --> System Preferences --> Job Purge --> Change the "Run Type" to Daily. Change the Data Purge to 3 days or whatever the desired value is .
2. Go to Admin --> System Preferences --> Data Purge --> and modify the values for the different reports till it suits your needs and wait for the job to run.

Similar Messages

Unable to play Quick Time movies in web pages

We have Quick Time 7.0.4 player installed on Mac OS X v10.4, But we are unable to open Quick time movies in web browser from external web sites.
It gives us error ‘To view this movie, you will need QuickTime 5 (or later)’
If we open Quick time movies from local disk in web browser then it works perfectly alright.
Could you please let us know the reason behind this?
Note: I have encounter this problem on safari and IE 5.2 browser.

For instance if you go to this page again in Safari,
http://www.apple.com/quicktime/qtv/mwsf06/
and then select "View Source" from the View menu, then press command-f to "find" within the page and search for ".mov"
You will find this, which shows the url of the movie itself.
<param name="href" value="http://stream.qtv.apple.com/events/jan/mw2006/mmw_2006_650ref.mov">
If you copy just this part:
http://stream.qtv.apple.com/events/jan/mw2006/mmw_2006_650ref.mov
And open QuickTime Player, go to the File menu, select "Open URL" the movie will play.
If you try the same technique on the page at the link provided by your client, it will allow you to bypass the html code that may be doing an outdated compatibility check and the movie may play. Or it may tell you that you are missing components (codecs, compressors etc.) in which case, post here again.

Possible path leak, unable to purge elements of base

Our Labview 2012 SP 1 program runs to completion. However, when we close down the main panel after execution has finished, and it exits Labview, it crashes with an error report.
I have attached one of the crash reports. Here's the text from one of the crash report files:
#Date: 20 Mar 2014 18:26:45
#OSName: Windows 7 Professional Service Pack 1
#OSVers: 6.1
#OSBuild: 7601
#AppName: LabVIEW
#Version: 12.0.1f5 32-bit
#AppKind: FDS
#AppModDate: 09/10/2013 09:10 GMT
#LabVIEW Base Address: 0x00400000
<DEBUG_OUTPUT>
20/03/2014 18:41:30.868
Crash 0x0: Crash caught by NIER
File Unknown(0) : Crash 0x0: Crash caught by NIER
minidump id: ef42f225-2da4-4a1a-8b0e-43f819a76f55
ExceptionCode: 0xC0000005û¥l;uÐ
</DEBUG_OUTPUT>
Possible path leak, unable to purge elements of base #0
Our program calls some of our own C++ libraries. They have been built into our software and running for well over a year without any trouble.
A few weeks back, we changed all of our library call nodes from “Run in UI thread” to “Run in any thread”. I have tried changing them all back to “Run in UI thread”. It doesn’t make any difference.
Any help with this problem will be greatly appreciated!
Attachments:
bf2a4406-18bc-4486-9e1a-93f6f06a5af5.zip ‏23 KB

I cannot say that it is related to LVOOP, but I have seen this in every LVOOP project I have worked on. The only way to know would be to write the exact same program as a non-LVOOP version.
However, I recall seeing this message soon after starting a new project and after creating the initial classes. I think I sent the small / new project to NI for investigation.
So... to answer your question.... it kinda looks that way..
However, the executables have been solid. I have not had complaints from the clients about unusual crash at the end of their run. The software runs tests that can last a week (or more). There are 3 or 4 different clients have code that use LVOOP.
The error is not something that I have been able to reproduce... It just happens.. Mostly when closing the project. Occasionally when running the code or trying to run the code. I should pay more attention to the behavior.

Unable to purge disk buffers: Operation not permitted

I receive the follow prompt in Terminal when trying to purge.... what gives?
"Unable to purge disk buffers: Operation not permitted"

Restarting the computer purges RAM but, if you have OS 10.9 or 10.10, it won't change what you see.
We are starting to see a number of questions about purging/cleaning RAM. I suspect this is because people are using the obsolete methods of OS10.8 and older to see what RAM is used while running 10.9 and higher. They are assuming nothing about how RAM handling has changed as the Mac OS evolves.
Starting with Mavericks, a lot of free RAM is pre-reserved for maximum access speed. Example. My iMac (running 10.9.4) has 12 GB of RAM--That's a decent pile. My Activity Monitor Memory chart looks like this with Safari, Mail, Messages, and some other stuff running:
Note that almost all my 12GB is "used" but the computer runs at lightning speed. The new indicators are "Memory Pressure" and "Swap Used." Pressure should be green and Swap should be under about 100MB, and not shown in GB!
Here is an Apple article on what Activity Monitor reports for Memory since 10.9:
Activity Monitor: View memory usage
If you computer is running slow, then look a K Shaffer's comments--something other than Memory is much more likely the problem. I would expand his questions about third-party software to include the following questions:
1) Are you running any anti-virus/internet security applications?
2) Are you running any "cleaning/tune-up/optimizations" applications?
3) Any peer-to-peer or torrent downloading software?
4) Any third-party disk backup software that came bundled with an external hard drive?
5) Any online backup scheme other than iCloud or Dropbox (Carbonite; GoogleDrive; MS One Drive)?

Unable to purge disk buffers

I ran the "purge" command in Terminal. I got this error:
Unable to purge disk buffers, error #-1
Any explanation?
Mike

You need to install CHUD tools (via XCode) to have this command available. Also have a look in this interesting thread: https://discussions.apple.com/message/10868144?messageID=10868144&amp%3b
Hope this helps!

Unable to purge execution audit data using repo browser

Since upgrading to OWB 11.2.0.2 I am unable to purge execution audit details from my control centers using the Repository Browser. The select boxes are greyed out so I cannot select jobs and click "Purge Selected Audit Details". This worked fine in 10.2.0.5.
Purging deployment audit details this way works fine. Anyone know if this function in the repo browser is broken in 11.2.0.2?
PS: I am aware of the sql scripts that could be used but I prefer doing it using the repo browser.

the procedure of ADD-policy is down
PROCEDURE add_policy(object_schema IN VARCHAR2 := NULL,
object_name IN VARCHAR2,
policy_name IN VARCHAR2,
audit_condition IN VARCHAR2 := '1=1',
audit_column IN VARCHAR2 := NULL,
handler_schema IN VARCHAR2 := NULL,
handler_module IN VARCHAR2 := NULL,
enable IN BOOLEAN := TRUE);
you have written extra one paramater is"statement_types=> 'INSERT, UPDATE'".
here is the correct code, but u need to execute permission on DBMS_FGA packege from sys user. connect as sys user then give command
SQL> connect sys/1 as sysdba
Connected.
SQL> grant execute on DBMS_FGA to scott;
Grant succeeded.
SQL> connect scott/tiger
Connected.
SQL> begin
2 DBMS_FGA.ADD_POLICY(
3 object_schema => 'scott',
4 object_name=>'emp',
5 policy_name => 'mypolicy1',
6 audit_condition => 'sal < 100',
7 audit_column =>'comm, credit_card, expirn_date',
8 handler_schema => NULL,
9 handler_module => NULL,
10 enable => TRUE);
11 end;
12 /
PL/SQL procedure successfully completed.
Message was edited by:
Md Ruhul Amin

Unable to remove Quick Time - getting a 'fatal error' message

Hi
I have two issues, both related I think to not being able to get onto itunes
I get an error message on the itunes home page saying it failed to initialize the plug ins and then closes down.
Also I am unable to remove Quick Time - I get a message saying a fatal error occured and it will not let me continue. I was hoping to remove both itunes which I had previously loaded, and remove Quick Time so that I could start again, although the whole thing is wearing me out

Managed to remove and reload Quick Time but this has not fixed the problem. still having trouble with Plugins on the Itunes homepage - can't move forward with this totally stuck
Any help would be appreciated

Log warning "Link from unexpected type of object" ("Possible path leak, unable to purge elements of base")

Hey,
I'm getting the following warning after closing my LabVIEW application (see also LabVIEW code snippet attached).
Can you help me figure out if this may be relevant?
I don't experience anything unexpected, also no leaking of memory.
Thanks,
Peter
#Date: Mo, 11. Nov 2013 15:14:42
#OSName: Windows 7 Enterprise Service Pack 1
#OSVers: 6.1
#OSBuild: 7601
#AppName: LabVIEW
#Version: 12.0 32-bit
#AppKind: FDS
#AppModDate: 06/26/2012 19:23 GMT
#LabVIEW Base Address: 0x00400000
Processing 1230000708 link to [LinkIdentity "ProcessTaskWrapper.lvclass:" [ Mein Computer]
<DEBUG_OUTPUT>
11.11.2013 15:15:35.726
DWarn 0xC1CF3BB8: Link from unexpected type of object {HeapClass=BDHP,UID=5401,DPId=23,o=0x0de33558} in VI [VI "ProcessPool.lvclass:configure.vi" (0x11646770)]
e:\builds\penguin\labview\branches\2012\dev\source\linker\HeapLinker.cpp(2852) : DWarn 0xC1CF3BB8: Link from unexpected type of object {HeapClass=BDHP,UID=5401,DPId=23,o=0x0de33558} in VI [VI "ProcessPool.lvclass:configure.vi" (0x11646770)]
minidump id: 236443a2-84d3-403e-a24a-fb72dd7ff65d
$Id: //labview/branches/2012/dev/source/linker/HeapLinker.cpp#12 $
</DEBUG_OUTPUT>
0x0069DDF3 - LabVIEW <unknown> + 0
0x10016460 - mgcore_SH_12_0 <unknown> + 0
0x013E32A5 - LabVIEW <unknown> + 0
0x00EBECFC - LabVIEW <unknown> + 0
0x01060FD1 - LabVIEW <unknown> + 0
0x0106112D - LabVIEW <unknown> + 0
0x0106A5C9 - LabVIEW <unknown> + 0
0x0106B6D1 - LabVIEW <unknown> + 0
0x005C28D3 - LabVIEW <unknown> + 0
0x005C03FC - LabVIEW <unknown> + 0
0x005C1BCB - LabVIEW <unknown> + 0
0x005C20AE - LabVIEW <unknown> + 0
0x006495BC - LabVIEW <unknown> + 0
0x009ECF0E - LabVIEW <unknown> + 0
0x01CC57D4 - LabVIEW <unknown> + 0
0x01CC5964 - LabVIEW <unknown> + 0
0x006513E3 - LabVIEW <unknown> + 0
0x00657C9D - LabVIEW <unknown> + 0
0x00B87A67 - LabVIEW <unknown> + 0
0x00B8C606 - LabVIEW <unknown> + 0
0x00B8DA6D - LabVIEW <unknown> + 0
0x014A90C2 - LabVIEW <unknown> + 0
0x014ABA3C - LabVIEW <unknown> + 0
0x014ADA42 - LabVIEW <unknown> + 0
0x01B4BE87 - LabVIEW <unknown> + 0
0x01BF99C5 - LabVIEW <unknown> + 0
0x01B5DBFC - LabVIEW <unknown> + 0
0x761D62FA - USER32 <unknown> + 0
0x761D6D3A - USER32 <unknown> + 0
0x761D77C4 - USER32 <unknown> + 0
0x761D788A - USER32 <unknown> + 0
0x01BF9C4D - LabVIEW <unknown> + 0
0x01BFA0C7 - LabVIEW <unknown> + 0
0x042F14D6 - QtManager452_2012 <unknown> + 0
0x670E7261 - NIQtCore_2012 <unknown> + 0
0x00000000 - <unknown> <unknown> + 0
Possible path leak, unable to purge elements of base #0
Attachments:
2013-11-11_153125.jpg ‏48 KB

Hello Peter,
as you can imagine, it is difficult for us to interpret an error message without a certain amount of information.
Even more, when you cannot reproduce it yourself every time.
And, on a side note, we as Application Engineers do not know how exactly the compiler works.
This could be something for the developers, but: to escalate an issue to the developers, there are some requirements.
- we have to know exactly when and how the error occurs, i.e. the exact steps which have to be done, so you can force the error to show up
- exact OS, LabVIEW version, all NI Software which is installed
- what is the application
- what has been done as troubleshooting actions, can the issue be avoided somehow
- we would need your VI or project, or at least a minimal version of them, which can produce the error message
- one of us should be able to reproduce the procedure and get the same error
I am sorry, but at this point, it seems like I cannot do much for you in this topic.
Have a nice day,
Best regards
PS: one more question:
is this even a message from LabVIEW? For me, it seems like a Windows crash report - which we can not fully support.
Christopher W.
Intern Application Engineering | NI Certified LabVIEW Associate Developer (CLAD) | NI Germany

Disque dur plein fichier userlog.txt Possible path leak unable to purge element of base #0

Bonjour,
j'ai fait un programme qui enregistre des valeur toute les minute dans un fichier texte avec l'horodatage HH/MM/S
apres 71307 echantillons (49 jours) l'horodatage commence a dériver a facon aléatoire
71304 22:31:48 13280 0 1 0
71305 22:32:48 13101 0 1 0
71306 22:33:48 12758 0 1 0
71307 22:34:48 12985 0 1 0
71308 22:35:53 14170 0 1 0
71309 22:36:53 14050 0 1 0
71310 22:37:55 14135 0 1 0
71311 22:38:56 13975 0 1 0
71312 22:39:58 13506 0 1 0
71313 22:40:59 12073 0 1 0
71314 22:42:00 11767 0 1 0
le fichier user log.txt dans le répertoire temp est enorme
quand j'ouvre le fichier user log.txt
il y a le message suivant qui est ecris a l'infini
Possible path leak unable to purge element of base #0
mon programme fonctionne sur 2 pc win 7 et pour l'instant je n'ai eu le probleme que sur un pc
qu'elle est la signification du message ?
et pourquoi il s'increment?
merci pour votre aide
hélio

hélio wrote:
how to close it and creates a new, every day?
If I understand your logging - you are only logging every 60 sec. I would Open and Close the log file each time.
Create a log file name with today's date as part of the log file name (Log_2014_07_07.txt)
Open log file
Position the file pointer at the end of the file. (Set File Position)
Write log data to log file
Close log file
The Format Date/Time String function will automatically create a new log file for each day and will reuse it for that day and then will create a new file for the next day.
Omar

Unable to create a report in bi publisher 10g

Hi All,
Unable to create a report in bi publisher. When we tried to create a report abcd, then it is giving the below error.
Operation failed: /abcd/abcd.xdo.
When we tried to create a report with the existing name, it is saying
An object with the same name already exists: /crm/crm.xdo
I can say this is not any permissions problem, I have logged inwith Administrator user.
Thanks

Hi,
Can any one..???

Unable to integrate Oracle Reports with Express--(To oracle Team also)

Hi
Unable to integrate Oracle Reports with Express. While defining
the Express database connection using the olap connection editor
iam getting the following error "Error locating the XCONEDIT.INI
file. Try re-installing the software".
what should be done?
Atleat,If anybody has successfully connected to Express via
Reports6i. Kindly give the details like what softwares to be
installed in what HOME? and also other steps involved in the
process.
YOur help !!!
kindly respond...(Oracle Team do respond with something)
with rgds

hello,
check out the notes
Note:112542.1
Note:167049.1
on oracle metalink for further information.
if you still have issues, please contact oracle support services
for furhter assistence.
regards,
the oracle reports team --pw

Visual Studio 2010 Upgrade - Unable to view some reports

I converted an application that had been developed in VS2005 so that it would run in VS2010. The application contains several Crystal Reports. Now when I debug the application I can only view some of the reports. With the others I get an exception with the message "Unable to find the report in the manifest resources. Please build the project and try again."
The ones that work and the ones that don't all have the Build Action set to Embedded Resource. I have tried removing a report from the project and then adding it back, but that made no difference. A new report displayed fine.
Does anyone have any ideas about what could cause some of the reports to throw this exception?

OK, here is the link to the thread I am replying to Visual Studio 2010 Upgrade - Unable to view some reports
And here is what I posted to start the thread that I am replying to:
I converted an application that had been developed in VS2005 so that it would run in VS2010. The application contains several Crystal Reports. Now when I debug the application I can only view some of the reports. With the others I get an exception with the message "Unable to find the report in the manifest resources. Please build the project and try again."
The ones that work and the ones that don't all have the Build Action set to Embedded Resource. I have tried removing a report from the project and then adding it back, but that made no difference. A new report displayed fine.
Does anyone have any ideas about what could cause some of the reports to throw this exception?
As you can see, I have described the exception that occurs when I try to view some, but not all, or the reports while debugging. I have also tried deleting a report and adding it back in but it made no difference.
Is this enough information?

Firefox crashed when I restarted it to install plugins and the crash reporter is unable to submit a report for this crash. How can I submit this report?

# This file is in the UTF-8 encoding
[Strings]
# LOCALIZATION NOTE (isRTL):
# Leave this entry empty unless your language requires right-to-left layout,
# for example like Arabic, Hebrew, Persian. If your language needs RTL, please
# use the untranslated English word "yes" as value
isRTL=
CrashReporterTitle=Crash Reporter
# LOCALIZATION NOTE (CrashReporterVendorTitle): %s is replaced with the vendor name. (i.e. "Mozilla")
CrashReporterVendorTitle=%s Crash Reporter
# LOCALIZATION NOTE (CrashReporterErrorText): %s is replaced with another string containing detailed information.
CrashReporterErrorText=The application had a problem and crashed.\n\nUnfortunately the crash reporter is unable to submit a report for this crash.\n\nDetails: %s
# LOCALIZATION NOTE (CrashReporterProductErrorText2): The first %s is replaced with the product name (i.e. "Firefox"), the second is replaced with another string containing detailed information. These two substitutions can not be reordered!
CrashReporterProductErrorText2=%s had a problem and crashed.\n\nUnfortunately the crash reporter is unable to submit a crash report.\n\nDetails: %s
CrashReporterSorry=We're Sorry
# LOCALIZATION NOTE (CrashReporterDescriptionText2): The %s is replaced with the product name.
CrashReporterDescriptionText2=%s had a problem and crashed.\n\nTo help us diagnose and fix the problem, you can send us a crash report.
CrashReporterDefault=This application is run after a crash to report the problem to the application vendor. It should not be run directly.
Details=Details…
ViewReportTitle=Report Contents
CommentGrayText=Add a comment (comments are publicly visible)
ExtraReportInfo=This report also contains technical information about the state of the application when it crashed.
# LOCALIZATION NOTE (CheckSendReport): The %s is replaced with the vendor name.
CheckSendReport=Tell %s about this crash so they can fix it
CheckIncludeURL=Include the address of the page I was on
CheckSendEmail=Email me when more information is available
EmailGrayText=Enter your email address here
ReportPreSubmit2=Your crash report will be submitted before you quit or restart.
ReportDuringSubmit2=Submitting your report…
ReportSubmitSuccess=Report submitted successfully!
ReportSubmitFailed=There was a problem submitting your report.
ReportResubmit=Resending reports that previously failed to send…
# LOCALIZATION NOTE (Quit2): The %s is replaced with the product name.
Quit2=Quit %s
# LOCALIZATION NOTE (Restart): The %s is replaced with the product name.
Restart=Restart %s
Ok=OK
Close=Close
# LOCALIZATION NOTE (CrashID): The %s is replaced with the Crash ID from the server, which is a string like abc12345-6789-0abc-def1-23456abcdef1
CrashID=Crash ID: %s
# LOCALIZATION NOTE (CrashDetailsURL): The %s is replaced with a URL that the user can visit to view the crash details.
CrashDetailsURL=You can view details of this crash at %s
ErrorBadArguments=The application passed an invalid argument.
ErrorExtraFileExists=The application didn't leave an application data file.
ErrorExtraFileRead=Couldn't read the application data file.
ErrorExtraFileMove=Couldn't move application data file.
ErrorDumpFileExists=The application did not leave a crash dump file.
ErrorDumpFileMove=Couldn't move crash dump.
ErrorNoProductName=The application did not identify itself.
ErrorNoServerURL=The application did not specify a crash reporting server.
ErrorNoSettingsPath=Couldn't find the crash reporter's settings.
ErrorCreateDumpDir=Couldn't create pending dump directory.
# LOCALIZATION NOTE (ErrorEndOfLife): The %s is replaced with the product name.
ErrorEndOfLife=The version of %s you are using is no longer supported. Crash reports are no longer being accepted for this version. Please consider upgrading to a supported version.

I think you may have pasted the wrong thing into the Description.
To try and resubmit a pending report (for example if you lost your internet connection):
#Go to about:crashes in the location bar
#Click the latest report link to resubmit it
If there isn't a pending crash report listed, I'm afraid you may be out of luck for that crash report.

Open doc URL: unable to open the report in same window

Hi
I'm trying to open a report using open doc url with "swindow=same" but still it opens in a separate window. This happens only when I use JAVA viewer. it works fine in ActiveX and HTML but I want this in JAVA viewer as i'm including this page in my JAVA application and it should open the report in the same window. I tried using "<a>URL</a>" and also target="_self" by HTML interpretation for that object but still the same problem. I'm unable to open the report in the same window by using JAVA viewer for Crystal Reports in info view. Please help me!!!
Envirorment Details: Crystal Reports 2008 SP3, BOE XI R3 SP3
regards
Raghavendra.G

I have tested that myself and It seems that HTML interpretation does not work with the Java viewer.
I have also tried using a hyperlink containing javascript
eg.
javascript:window.location.href='http://www.sap.com'
but the java viewer seems always to launch a new window before processing the command.
I would recommend to open a case by SAP support ( httP://service.sap.com/support )
Regards,
Stratos

The GR & IR lines unable to shown in report ,but it does has in PO history

Hi,
Tcode: y_d35_87000552 [GR/IR Report for Stock Valuation/BB6 Reporting (with summary listing)]
parameter:
company code: HC02
GR date: 01.01.07 to till 30.09.07
Issue: The line items captured in the reports was not the complete one as some of the purchasing lines have been excluded.
When trying to drill down via tcode ME23N for one of the missing transaction in the said reports (PO#SMLMFO2002), noticed that the purchasing doc was having GR and IR process in the year of 2007 as shown in 'purchasing order history' tab and all have generated the MM & FI entries.
Conclusion: The GR & IR lines unable to shown in report from Tcode: y_d35_87000552 but it does has GR & IR entries at PO level's view.
Appreciate if you can assist urgently. Thank you.
Regards;
Tata

check in MB5S trx

HUM 1.2.0 - Unable to Purge Quick Reports

Similar Messages

Maybe you are looking for