HUM 1.2 and Windows 2008 - Server

Hello,
it is possible to run HUM with Windows 2008-Server? Problem is: It runns always CWLMS 3.2 and the customer wantes to add HUM. The hardware is not the problem.

There is both client and server support for Windows 2008 in Ciscoworks LMS starting with release
3.2 (Common Services V3.3). Please have a look at the following links:
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_common_services_software/3.3/release/notes/cs33rel.html#wp79176
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/install/guide1/overview.html#wp1086601
Regards
Farrukh

Similar Messages

  • T400s and Windows 2008 Server - Network card

    I have installed Windows 2008 Server Enterprise edition on T400s. I cannot get network card to work, or wirless. I tried drivers for Win 7 and Vista. Are there any drivers for 2008 Server, or workaround?

    Partially solved the problem for wirlesss connectivity:
    1. Downloaded drivers from Intel site for Intel Wireless 5300 card
    2. Enabled wireless setting on Win 2008 through features option

  • Oracle Express and Windows 2008 Server

    I successfully installed the Oracle Database 10g Express Edition on our new Windows 2008 Server. However, after install I can not open the Database Home Page in IE 7.0? The problem description I get when I click on the Diagnose Connection is "127.0.0.1" is not set up to establish a connection on port "8080" on this computer.
    The server is also a domain controller, DNS server and DHCP server.
    Is this version compatible with Windows 2008 Server?
    Is it a DNS problem or may be a security problem?
    Heinrich

    I have not tried it on Windows 2008. But the challenges with your configuration could be endless. Here are some common issues:
    1) XE must be installed by a local machine administrator, not a domain administrator
    2) XE requires several ports (1521, 8080)
    3) Firewalls and antivirus are known to crash the install
    4) Often 3) will block the installation of the database
    Note that XE does not use any form of HTTP listener - the database listener does the bassic work and passes HTTP requests into the database. So no Apache or IIS requires with XE.

  • Agent for RedHat5 and WIndows 2008 Server

    does anybody know if there is a possiblity to integrate these two platforms?
    thank you for your help
    Werner

    There is both client and server support for Windows 2008 in Ciscoworks LMS starting with release
    3.2 (Common Services V3.3). Please have a look at the following links:
    http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_common_services_software/3.3/release/notes/cs33rel.html#wp79176
    http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/install/guide1/overview.html#wp1086601
    Regards
    Farrukh

  • SMB Network Share Access slow (MAC OS X SL and Windows 2008 Server)

    Hi,
    I've added some iMacs with 10.6 to the Active Directory. This works totally fine. Anyways, I have some trouble, when accessing shares on my network. I found out, that some problems came up, because my network name was XXX.XXX.local I changed the Domain name of the Active Directory, but still the problems exist:
    When opening the finder, Open Office or Microsoft Word on the Mac and browsing through files and folders, it sometimes takes up to 30 seconds and more, until the content of a folder appears... I already tried ADmitMac from Thursby, but it didn't seem to fix this problem. When accessing the shares from a Windows machine, they run pretty fast. Any idea?

    I too have the exact same problem and need to figure it out soon. Very slow response times. It seems the server is getting over utilized (look at your resource monitor).
    Current configuration are:
    MAC OS 10.6.4 using a Windows 2008x64 as a file server. Clients are connecting via SMB.
    Whats the common denominator here?
    Our users are using Adobe InDesign 3. When users open the file located on the server and submits a print job directly to the printer, the InDesign links ( some files contain around 100 ) reach back to the server to reference the file before it prints. This may be why the server's resources are heavily affected and may be the reason why it may cause slow response times for other MAC users who try and save, open or copy files from / to the server. We have not found a soultion and all things mentioned here including the internet links did not work. We are still testing other variables (copy the Indesign files locally to detemine if print times decrease, etc. Any comments appreciated.

  • SAP Conversion Agent for PI 7.1 EHP 1 and Windows 2008 Support

    Hello
    I have read that some people were able to run SAP Conversion Agent on a PI 7.1 EHP1 Installation on Windows 2008 Sever. But in the Product Availability Matrix there is no support for 2008 yet.
    In the SAP Library (http://help.sap.com/saphelp_nwpi71/helpdata/en/43/fc39c16bfb025ee10000000a1553f7/frameset.htm) under the release notes for SAP Conversion Agent there is still version 8.5, but when I install the actual Support Package I have Conversion Agent 8.6 running and according to information on the informatica.com site this version is running under 2008!
    Has anybody clear and actual information about which OS the newest SAP Conversion Agent for PI 7.1 EHP1 supports? Or has anyone experiance on Conversion Agent and Windows 2008 Server?
    Thanks
    Christoph

    Hi Mark
    Thanks for your reply! Fact is that in the actual Package (SP06) the version of Conversion Agent Engine supplied is not 8.5.5 as in the SAP Note mentioned, it is version 8.6.0:
    C:\Documents and Settings\pi1adm>CM_console -v
    Engine-Version: 8.6.0(Build:30)
    Engine-Syntaxversion:4.00.10
    I will oben a ticket for that ...
    Regards
    Christoph

  • Radeon Drivers problems with BootCamp Windows 2008 Server R2

    Hello !! I have some troubles with BootCamp and Windows 2008 Server R2... I can't find any graphic drivers for my AMD Radeon HD 6490 !! Heeeelp please
    (I Have a Macbook Pro i7)

    Shoooryuken, did you ever get this problem resolved? I have thhe same issue...
    I have the 2011 MacBook Pro 15" 2.0ghz Quad Core i7 with integrated Intel HD Graphics 3000 and AMD Radeon 6490M.
    I just installed Windows Server 2008 R2 (Which is based on Windows 7) using Boot Camp. After I installed it, the I only have 3 resolution options, all of which are stretched. I checked the device manager and found that the Apple Instal DVD did not work and only a "Standard VGA Graphics Adapter" was installed. It also reports a whopping 16MB of graphics memory
    I downloaded the "detect and install" driver utility from AMD (http://support.amd.com/us/gpudownload/Pages/index.aspx) and it detected my correct OS and downloaded something (driver maybe?). When I clicked install, I recieved this message: "AMD Catalyst Mobility cannot be downloaded due to incompatible hardware/software on your computer. Your computer does not contain a proper graphics adapter."
    I don't really know why Windows does not detect the graphics card. Right now I am trying to install the Intel graphics drivers for the Intel HD 3000 integrated graphics... I will report back if I get the integrated graphics running...

  • Windows 2008 Server and HP Color LaserJet 2605dn Driver Issue when Sharing Printer

    I have a HP Color LaserJet 2605dn printer that I need to setup on a Windows 2008 server.  I need the server to act as a Print server, but I have been unable to get any drivers to load other than the 64 Bit Universal drivers.  Because most of the company uses XP (32 and 64 bit), I also need to load those drivers under additional drivers; however, I have been unable to load them, when I point to the INF file (any of the 10 that unzip from the driver package), it says it is not for this printer.  I have even tried the generic 32 bit PS and it says the same thing.  Any ideas on what I am doing incorrectly or where to get the drivers that I need?
    Thanks,
    Gary

    Hello, I have the same problem. For the 2605 Printer is only the universal print driver available. Is seems that HP is to be lazy about making new 2008 driver.

  • Windows 2008 Server contacting multiple public IP on port 80 and 443

    Windows 2008 Server contacting multiple public IP on port 80 and 443
    Source : Microsoft Lync 2010
    Port : 80
    Destination : unknown.prolexic.com
    Source : Internet Explorer
    Port : 80
    Destination :a-0001.a-msedge.net
    Source : Internet Explorer
    Port : 443
    Destination :204.79.197.200
    Is this virus? how to stop the same?

    Org name of the IP shows Microsoft Corporation
    Since its hits on firewall , i will have to stop the same 
    but not sure for what its being contacted to these Ips
    OrgName:        Microsoft Corporation

  • Windows 2008 Server - Cannot run Active Directory Users and Computers

    Hi,
    I am running Windows 2008 Server with latest windows updates installed. Directory Services Role also.
    I attempt to open Active Directory Users and Computers tool and I get a;
    Microsoft Visual C++ Runtime Library error;
    "The Application has requested the runtime to terminate it in a unusual way. Please contact the application's support team for more information"
    I click ok, then get the following debug info;
    Problem signature:
    Problem Event Name: APPCRASH
    Application Name: mmc.exe
    Application Version: 6.0.6001.18000
    Application Timestamp: 47919524
    Fault Module Name: msvcrt.dll
    Fault Module Version: 7.0.6001.18000
    Fault Module Timestamp: 4791ad6b
    Exception Code: 40000015
    Exception Offset: 0000000000029b06
    OS Version: 6.0.6001.2.1.0.272.7
    Locale ID: 3081
    Additional Information 1: 43aa
    Additional Information 2: cf3a46656318492c1997480001b6b0e0
    Additional Information 3: 3837
    Additional Information 4: 92f72e0d0589ff77cef51e0a413aeff6
    Read our privacy statement:
    http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409
    If someone could please assist, it would be very much appreciated.
    Regards
    B

     
    Hi,
    To solidly troubleshoot this kind of issue, we need to debug dump file. A suggestion would be to contact Microsoft Customer Service and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
    To obtain the phone numbers for specific technology request please take a look at the web site listed below:
    http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
    However, I am also glad to share my research.
    Some third party applications may lead to this error. Please check if you install other third party applications on Windows server 2008?
    Also, please follow the article below to perform necessary steps to see how it's going?
    FIX: You receive an "invalid page fault in module MSVCRT.DLL" error message after you install the run-time libraries from Visual C++ 6.0
    http://support.microsoft.com/kb/190536/en-us
    Hope this helps.
    Best wishes
    Morgan Che

  • Windows 2008 Server Enterprise R2 x64 and Perc 4/dc SCSI driver issue

    Hello all, this is the first time posting so please forgive me if this has been posted here before.  I did try to search this issue but zero returns.
    OK, I have a Dell PowerEdge 2900.  I have just put a fresh install of MS Windows 2008 ENT. Server x64.  I cannot seem to find a driver for the PERC 4/dc SCSI controller I have installed.  I have been told the 2003 x64 driver would work so I attempted to install that driver but was unsuccessful.  Then I was told by Dell that the driver should be native to the OS.  Is the driver native to 2008 Server (or, supposed to be)?  Does anyone have an answer as to where I might retrieve am driver of the controller if not?  Anyway, thanks in advance

    Hello,
    I don't have a PowerEdge 2900, but I do have a PowerEdge 2850.  I'm also just a regular bloke like yourself that just happened upon your post and after I figured this driver debacle out I registered to hopefully help.
    The good thing is my PERC card is the same in the PE2850 as it is in your PE2900, as I'm utilizing a PERC 4/DC.  I've also managed to run into the same issue you ran into(?) trying to load Windows 2008 Server Enterprise R2 (support for 32bit processors have been removed in R2... so no more x86 versions... my poor PE2650s never stood a chance with this OS).   
    I can tell you officially from my experience/research Windows Server Enterprise R2 does not have support built into it for the PERC 4/DC card.
    However, I was able to download the Windows 2003 x64 driver from support.dell.com and make it work after much trial and error with newer releases of the PERC 4/DC driver that were not accepted by 2k8R2.
    Here's the link:  http://support.dell.com/support/downloads/download.aspx?c=us&cs=RC956904&l=en&s=hied&releaseid=R100373&SystemID=PWE_PNT_P3C_2850&servicetag=FBCLP61&os=WX64&osl=en&deviceid=6396&devlib=0&typecnt=0&vercnt=1&catid=-1&impid=-1&formatcnt=3&libid=35&fileid=129549
    File name (incase Dell moves it on you guys) is "perc-w2k3-6.46.3.64-A01.exe", date released 6/9/2005, build version 6.46.3.64, and the Dell revision number is A01. 
    Even though it states the driver is for the LSI Logic PERC 4e/Si it's sort of a mega pack including many other drivers such as the PERC 4/DC.  This was much relief because I was thinking I would need to stick with Windows 2008 until I found this driver for Windows 2008 R2.  :)
    What I did was:
    1) Downloaded the driver and extracted it to a USB drive.
    2) Booted-up via the Win2k8R2 CD and when it got to the screen where it asked to install to a partition and didn't show me a partition to install Win2k8R2 to I selected the option to load a driver. 
    3) From the load driver option I just browsed to the directory where I extracted the files and selected that directory.  If the "hide devices that are not compatible" option is selected (normally on by default) it will show you the proper driver. 
    4) Select the PERC 4/DC driver and then setup your partitions the way you would like them!  
    From there you should be able to boot into the OS... and really have some fun.
    Now you have the power... I guess the choice is yours to R2 or not to R2... that is the real question.  :)
    Enjoy!
    Dave
    Thanks and this worked for a Power edge 1800, PERC 4/DC as well. Kukan

  • Windows 2008 Server boot loop and unable to log on in Safe mode

    The Situation: I used msconfig to reboot Windows 2008 Server r2 into safe mode. On rebooting, boot progresses ok and the log in screen appears very quickly, then disappears and the machine reboots. I've tried typing the password very quickly and whether
    I get it wrong or just can't get enough typed in time, I don't know, but the reboot loop continues. So, i can't log on and can't change safe boot back to normal.
    I know Server 2008 uses bcdedit and no longer has a boot.ini, so I don't know if it is still possible manually to amend a boot file so it starts in normal mode again. Can anyone help me to break out of this boot loop without having to resort to anything
    major, such as reinstallation?
    Just to make clear, I haven't updated the system and the only change made was with msconfig to require safe boot on restarting.
    Thanks

    from the safemode try this syntax
    Syntax: bcdedit /deletevalue {default} safeboot
    http://technet.microsoft.com/en-us/library/cc721886(WS.10).aspx
    http://www.virmansec.com/blogs/skhairuddin
    How on earth is that a good answer?  Sorry for the necrosis here of bringing up a post 9 months later, but I just ran in to this issue again.  The OP said that he was STUCK IN A BOOT LOOP having placed himself in SAFEMODE already.
    How is he supposed to type this in if he can't log in?
    What worked for me was to keep striking F8 like a cobra during boot and telling it to use the Last Known Good Configuration option, after the 4th autoreboot, it let me log in and let me switch it back out of the safe mode and back to the normal boot. Yes,
    I am aware this is quite lucky and now I don't have to rebuild all my server set up, and that your mileage may vary here, but, keep trying, you might be lucky.

  • Install and uninstall of Oracle 11g R2 on Windows 2008 Server

    Hi,
    I installed Oracle 11g R2 and set up a database on Windows 2008 Server following the steps in the Installation Guide and it was successful. After uninstalling the product and doing a re-install, the step to configure the Net Configuration Assistant fails with the following msg.
    Failed to allocate port(s) in the specified range(s) for the following process(es): JMS
    [5540-5559], RMI [5520-5539], Database Control [5500-5519], EM Agent [3938] | [1830-1849]
    Also, when I ran "netca.bat" and tried to reconfigure the Listener, it indicated the default port 1521 is being used. I ran "netstat -an" and do not see the port listed.
    Questions:
    What is the best way to check if something was leftover from my previous install of Oracle that is using the default ports?
    What do I need to do to ensure a re-install is successful?
    Uninstalling Oracle -
    1.     Log in as the Administrator.
    2.     Stop all Oracle Services.
    3.     From a cmd window, run C:\app\oracle\product\11.2.0\dbhome_1\deinstall\deinstall.bat.
    4.     Delete the C:\app\oracle directory.
    5.     Remove the following registry entries as per http://download.oracle.com/docs/cd/E11882_01/relnotes.112/e16777/toc.htm:
    HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle Services for MTS
    HKLM\System\CurrentControlSet\Services\EventLog\Application\OracleDBConsole<SID>
    HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle.<SID>
    HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle.VSSWriter.<SID>
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Oracle11

    Johan, after I uninstalled Oracle, I checked to ensure there were no remaining Oracle services remaining.
    Srini, below are the steps I followed to uninstall Oracle. In step 3, I just ran deinstall.bat without any parameters and provided required information as prompted. Note, I uninstalled using the Administrator user and not the "oracle" account that I used to install Oracle.
    Uninstalling Oracle -
    1. Log in as the Administrator.
    2. Stop all Oracle Services.
    3. From a cmd window, run C:\app\oracle\product\11.2.0\dbhome_1\deinstall\deinstall.bat.
    4. Delete the C:\app\oracle directory.
    5. Remove the following registry entries as per http://download.oracle.com/docs/cd/E11882_01/relnotes.112/e16777/toc.htm:
    HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle Services for MTS
    HKLM\System\CurrentControlSet\Services\EventLog\Application\OracleDBConsole<SID>
    HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle.<SID>
    HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle.VSSWriter.<SID>
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Oracle11

  • Automate the database and forms / reports services to start on windows 2008 server R2 startup

    Dear memebers,
    I want to automate the database and forms / reports services to start on windows 2008 server R2 startup. whats the possibilities and which method is the best?
    Regards:

    Hi,
    type services.msc at run
    then check for Oracle Services--> Right Click-->Properties-->Startup type-->start automatic
    HTH

  • How to install a plugin on 64 bits windows 2008 server?

    From the developer forum, I found a description which told me how to install a plugin on windows series system, but I only succeded intalling the plugin on 32 bits windows xp, couldn't install the plugin on 64 bits windows 2008 server. Any ideas or advices, men of genius? Thanks :-)

    Please check if all your plugins are up-to-date. To do this, go to the [http://mozilla.com/plugincheck Mozilla Plugin Check site].
    Once you're there, the site will check if all your plugins have the latest versions.
    If you see plugins in the list that have a yellow ''Update'' button or a red ''Update now'' button, please update these immediately.
    To do so, please click each red or yellow button. Then you should see a site that allows you to download the latest version. Double-click the downloaded file to start the installation and follow the steps mentioned in the installation procedure.

Maybe you are looking for