HUM Issue

Dear Gurus,
I'm new to HUM and Currently I'm working on HUM.I've created a material and a packaging material.I created a Purchasing document and taking inbound delivery for the Purchasing document and doing packing in inbound delivery.
I made the Putaway process for the material and doing MIGO respect to Inbound delivery.In MIGO system creates a delivery number when saving instead a material document on saving.
I don't the exact problem.System is not giving any error message in MIGO.
Can anyone share with me the thoughts on this issue?
Regards
PKB

Hi,
I too had a similar issue.
I had the inbound delivery packed and TO was open.At this stahe I treid to do GR agaisnt Inbound delivery in MIGO. System created another Inbound Delivery ( since Sloc was HU managed).
So, you need to confirm TO in LT12 which means PGR is done or as suggested in the above post, do the GR in in VL32N after TO was confirmed
Regards

Similar Messages

  • OS 10.4.10 Update Causing Audio Popping (AND HUM) Issues:

    OS 10.4.10 Update Causing Audio Popping (AND HUM) Issues:
    The problem on my Intel Mac mini with external Klipsch speakers (two mid-range/high and a subwoofer) is REAL obvious as the system emits a hum like a Spinal Tap amplifier turned up to #11 when 10.4.10 powers down the audio circuitry
    Then, if I play a song in iTunes, it first pops and the hum disappears right before playing.
    Quite annoying. I restored the mini from a recent backup to 10.4.9. Problem gone.
    I'm glad I test updates on the mini before applying them to my Intel iMac 24. I guess I'll just hide & watch what happens before doing any more updates.
    Here's what I sent to Apple tech support:
    Guys/Gals (OS X Engineers):
    Concerning the Snap, Crackle Pop Audio problem in the 10.4.10 update:
    Please. Just do the right thing and fix the audio.
    There is no need to power cycle the audio subsystem to save .0005 amps on the laptop line.
    And then to make your Mac mini/iMac/other desktop users have to put up with it when using AC power is ridiculous.
    Put the audio subsystem back like it was in 10.4.9 and let the laptop battery freaks looking for mini-amp savings get a "work-a-round".
    Crikey!
    iMac 2.16 Ghz Intel Core 2 Duo 2GB RAM Mac OS X (10.4.9) 20 Years of Microsoft-Induced Grey Hair
    Mac Mini 1.83 Ghz Intel Core Duo 1GB RAM   Mac OS X (10.4.9)   20 Years of Microsoft-Induced Grey Hair

    Libby,
    Backup is unable to make a restorable by Disk Utility backup. You can restore pieces of the software as outlined in my FAQ about backing up user data:
    http://www.macmaps.com/backup.html
    But to be able to restore a backup with Disk Utility, you need a cloning utility to have made the backup.
    I suggest starting a new thread here, where someone else could help you out better:
    http://discussions.apple.com/forum.jspa?forumID=752&start=0
    First off, you'll get a wider audience who may be able to solve your problem. Secondly, responses to you won't confuse the original poster with solutions that don't apply to them. And thirdly, you'll know for certain whether or not a response applies to you.

  • Inherent ground Loop/audio hum issue with Intel Core 2 duo?

    Has this ever been resolved? I can't find a definitive solution:
    We're a recording studio and have put a 2.16 Intel Core 2 Duo,
    667Mhz running OSX 10.4.11 into service for a second workstation.
    The audio I/O device is an Apogee Duet Firewire audio interface.
    The Mac delivers a continuous 60 hz hum to the audio signal on the
    output.
    Tried a ground lift which did not resolve it at all.
    Audio is clean on the headphone-out of the interface btw.
    Based on searches, discovered this is a known/reported issue with
    a number of Mac models - tho i've not found specific fix for this
    particular model if any exists.
    Apparently a Mac defect. Any suggestions?
    We are a pro audio facility and things like cables and external devices
    have been tested and ruled out. All definitely points to an internal
    issue w/ the machine.
    There are numerous old threads about CHUD developer tools(?)
    But, NO version I've downloaded (i think we installed/deinstalled
    'em all) has offered this "Nap" processor-adjustment option that is talked
    about as having "fixed" this hum issue for MDD G4 and Intel G5 model users.
    Love to hear from anyone who can help on this...Hate to have to dump a nice
    Imac for this. (Everything's perfectly quiet about it except the audio out -
    that kinda blows ; (

    Hi, checking back in on this. OK, running a Macbook in place of the IMac with the same Apogee Duet firewire audio interface, the hum is not apparent on the output.
    The iMac has a ground lift. All suggests that this is a known internal intel iMac problem and hope any fellow users could give me some idea of how to correct it before I must relegate this one from studio to office use. (we simply have to have clean hum-free audio monitoring...don't think that's asking too much eh?)
    Again, there've been posts going back over the years about some form of developer tool adjustment that enables putting intel machine processors into a "Nap" mode.
    Is there a version of the CHUD tools that will offer this option on this model?
    (intel 2.16 core duo - 10.4.11)
    Thanks for any other ideas
    Mike

  • SAP HUM Issue while Posting TO.

    Hi There,
    I have issue while doing picking for HUM with Nested HU.
    Scenario :
    - We have Nested HU with 11 Box packed on it. (10 Box Batch A + 1 Box Batch B).
    - I have an outbound delivery for 1 material with split batch. (Batch A and Batch B). while doing picking against outbound delivery, i created a TO. System did proposed me a Nested HU for picking. I created a Pick HU by LH01 as well to repack what i want to pick. All worked fine till now.
    - Now I want to pick 1 box of Batch A and 1 Box of Batch B.
    - I can not do that. I am keep getting error i do not have enough material on nested HU, how ever i do!!!
    - IFFFF,
    I do have only 1 Batch to pick ( NO Split delivery), from same Nested HU, i can always pick 1 box. Either Batch A or Batch B with full QTY. I only get error for Batch split scenario for picking.
    Can any one help me on that?
    Smit.

    You should debug your program and see where exactly and what causes this behavior.
    In this way you will have a cause of the issue and could be able to retrace it back to the root cause of the problem.
    Just one more thing to clarify... Your TO is created and the system did propose your nested HU for picking but when you pick from it, you get the error message?
    Can you please write the exact error message number and description?

  • MBP retina swap memory/humming issue

    So i have 2 issues(may or may not be related) going on with my Retina MPB.
    1. Whenever i play any flash video(youtube for ex:), it just goes crazy with humming sound(fan I imagine), even though it doesn't get hot and temps are within acceptable range. I don't see the process(chrome flash plugin) taking more than 15 to 20% cpu at max...and memory is acceptable as well, but this sound just keep fluctuating and can't figure out why exactly.
    2. Mayb this is related to 1, but why does a machine with 16GB ram use 2.2 of swap memory? or I am reading activity monitor wrong?
    http://cl.ly/image/2O3O381l111v (Screenshot of activity monitor)
    Any thoughts?
    thanks

    You can check if some or other corner inside is overheating with Marcel Bresink's free Temperature Monitor. Or splurge a bit on his Hardware Monitor so you can check on temps, fans and the works. http://www.bresink.de/products.html
    The use of swap on a user-class computer with 16GB RAM is indeed odd. I've been using mine all week long, running VMs on Fusion, all of Office's apps, browsers, whathaveyou, and swap still remains at zero. Only time I saw some swap space allocated was when I ran Gimp, that insists on swapping explicitly to disk, even if it is just editing a piddly 80k JPEG. But even then, the swap area allocated was just a few tens of MB's, nothing like that huge 2GB area. Besides Flash, care to share what else is running in there?

  • MacBook Pro Earth Hum Issue: Fairly certain I know the problem, I could just use some advice.

    Been a MacBook Pro user for almost a year now. I had an issue with my charger a couple of months ago, as it got a split (my own fault) and despite trying to a DIY job, I thought a new one would be best. However, since it was only one part of the charger, I thought I'd try looking for just the part in question. So I went to eBay, which in hindsight was probably a terrible idea. This was the part I got...
    http://www.ebay.co.uk/itm/230946261873?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1 497.l2649
    99.6% feedback, UK seller and at the time, quite good reviews from other buyers. Everything seemed pretty good. However, in less than a month, not only is the charger visually deterioating (something that in a year, I never experienced on my original charger) and worse, I'm getting a buzz when it's plugged in, most notably when I have headphones in (also never happened on my original charger). Unplug the charger, it goes away. Both my V-Modas and Earbuds work fine on other devices. The earbuds are terrible with the buzz. So I tried my old, DIY-fixed charger and low and behold, the buzz disappeared.
    Not only that, but I've got two, albeit very very small, shocks from this charger. I've stopped using it now and went back to the old charger that whilst works, isn't in the best condition. Going to have to get a new one ASAP.
    My question, mainly, is would it be safe to assume a brand new charger direct from Apple, or from PC World (a local authorised seller) would work without any of these issues? Secondly, do we think that perhaps the "genuine" charger I was sold is far from it? The quality is flimsy compared to the original one I got, which doesn't seem fitting. Could I have a bit more than a simple 'broken product' dispute on my hands?

    Yep, that's the one. That seller has agreed to refund it upon testing.
    Also, having spoken to AppleCare, my original charger (with the cable tear) could still be replaceable under warranty, so I'm getting that looked at tomorrow.

  • Cisco Works LMS HUM issue

    Hi,
    I am using Cisco works LMS 3.1 with HUM 1.1.0. I am receiving thresold and job schedule mail alert from HUM.
    It is showing error in JOB history  “Not able to connect the mail server” while alerts from RME,IPM,CS,DFM are coming on mail.
    I have Configured HUM just 3 days back and all others application had been configure 4 months back.
    Please help.
    Regards,
    DJ

    Hi Clarke,
    Thanks for response. Please see the attached HUM smtp error. I have tried the HUM JOB with sniffer to filter smtp port 25 traffic but nothing is reflecting
    in sniffer when trying to send mail through HUM while DFM,RME IPM mail are showing in sniffer and we are getting mail as well.
    I have upgraded HUM version from 1.1.0 to 1.1.2 but the error is same.
    Regards,
    Dinesh Joshi

  • Humming Issue

    Hi I recently downloaded Fan Control for my 24" imac. I'm not sure if it's normal or not but the big apple logo area, underneath the screen when I sit back on my chair and the room is dead quiet, I can hear the humming coming from there. But when I have music or tv on I can't hear it. Is that normal?
    Someone please answer me asap.
    This is my first imac.

    Lower Temp Threshold: 86*F
    Upper Temp Threshold: 153*F
    Slowest CPU Fan Speed: 1300RPM
    Slowest HD Fan Speed: 1600RPM
    Slowest DVD Fan Speed: 1000RPM
    Current Fan Speeds:
    CPU Fan: 1700 / 1767RPM to 1800RPM
    HD Fan: 3000 / 2998RPM to 3000 RPM
    DVD Fan: 1700 RPM to 1669RPM
    Current temperture:
    CPU heatsink: 97*F
    Internal HD: 108*F
    Internal DVD: 98*F
    GPU Heatsink: -197*F

  • CiscoWorks LMS 3.1: HUM and Web access issue...

    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-parent:"";
    mso-padding-alt:0in 5.4pt 0in 5.4pt;
    mso-para-margin:0in;
    mso-para-margin-bottom:.0001pt;
    mso-pagination:widow-orphan;
    font-size:10.0pt;
    font-family:"Times New Roman";
    mso-ansi-language:#0400;
    mso-fareast-language:#0400;
    mso-bidi-language:#0400;}
    Hi there,
    I would like to seek your counsel with regards to the recent incident that we encountered with our CiscoWorks LMS 3.1 running on Solaris 10.
    A few days ago, we received a few complains from our users that they were unable to view the pollers or contents of the TOP-N <CPU | Memory | Interface> Utilization on the HUM’s home page (see attached file, hum_homepage.jpg).
    We (tech support guys) checked the pollers’ status and they’re all Active (see attached file, pollers.jpg); we notified our Administrators and requested for a copy of the HUMPortal.log (see attached file, humportal.zip).
    The following day, while waiting for the HUMPortal.log, we received reports that users accessing the HUM home page are stuck with the message “loading…” on all TOP-N Utilization reports.
    As we were about to re-queue our request from our administrators, we received reports (a few hours ago) that our CiscoWorks LMS is inaccessible via web browser.
    We alerted our administrators and they attempted to restart the Daemon Manager (/etc/init.d/dmgmtd); they were able to successfully shut it down but took several attempts to start it up.
    As they attempt to start up the Daemon Manager, they encountered the following error message:
    # /etc/init.d/dmgtd start
    Error: Daemon Management could not start. Trying again
    Error: Unable to bind to port, please check port (42340) state and permissions.
    Error: If the port is in use, please try starting Daemon Manager once it become free.
    After several minutes passed, they were able to start up the Daemon Manager successfully although the CiscoWorks LMS is still inaccessible via web browser.
    We requested for a copy of the “pdshow –brief” log and every daemon (as far as I know) seemed to be working fine but it never hurts to ask for help to verify my findings (see attached file, pdshow0818a.log).
    As of the moment of  this writing, we are still unable to access CiscoWorks LMS via web  browser; any insight or suggestion on the next step to take in  troubleshooting and eventually solving this problem is very much  appreciated.

    The port 42340 issue is most likley not related to the HUM issue you described. The latest log entry you provided indicates "Possible reasons for 'No Data' in HUM Portlets could be either Poller is not configured, or Poller is deactivated, or Poller Failure has occurred, or Summarization job did not start." The error is repeated back to the beginning of the file dated Aug 14 16:39.
    To focus on the HUM issue:
    Did any change occur on or around the 14th that you are aware of?
    Please provide some additional debugs:
    1. Please enable debug for "UPMProcess"
    Log files are stored here: #/var/adm/CSCOpx/log/#
    - HUMPortal.log
    - upm_summarization.log
    - jrm.log
    - upm_process.log
    2. To set log levels:
    *Health and Utilization Monitor > Admin > System Preferences*.
    - Select Log Level Settings.
    - Select the application module from the drop-down list.
    - Select the Debug log level from the Logging Level drop-down list.
    Thanks,
    Nick

  • Persistent Hum Is

    I am using a X-FI card, but I believe the hum issue I am trying to address is card independent. I want to run iTunes through my computer sound card to my stereo. That worked for a while, but I made some hardware changes and now I get a loud hum when I attach to my home stereo system. Using the same cabling, I can connect the iPod directly to my stereo system its clear as a bell. However, using my PC sound card (or the onboard sound on the motherboard) the hum is present. I suspect there is some sort of electrical field or grounding issue. I am hoping people on this list have some insight as to what that might be and how to address it. Thanks!?Hagen FinleyBoulder, CO

    I'm guessing that your screen reduces brightness with some sort of resistor which is applied to it as you turn it down. This resistance then creates more electric build-up (all electro-magnetic stuff I believe, but I'm no expert) and a sonic byproduct in the form of a hum. It may be being pickup by passing audio cables.
    I had a hum from a power source that I manage to reduce heavily when I re-organised my cabling. I have audio cables (speaker wires, RCA/phono/jacks etc.) all running in separate parallel courses crossing as infrequently as I could manage. By keeping them separated by a couple of feet, the hum markedly came down. Check your cables aren't running too close, or that the monitor is not too close to the speakers.
    If that is not possible, you may want to invest in some better shielded cabling.
    May help....
    G5 Dual 2.5 with 8 Gig RAM   Mac OS X (10.4.8)  

  • How to eliminate ground hum?

    I have recently tried recoding my Roland Juno synth into Logic but have discovered that there is a ground hum issue.
    I have taken the Juno to a synth repairer and they have suggest that I remove the ground earth from the plug to cure the problem!!!
    I understand that this is extremely dangerous and am not prepared to carry this out.
    Can anyone suggest another way around this issue.
    Some of my thoughts so far have been:
    - Can I use a DI box with an earth lift switch?
    -Could I record the Juno with ground hum to one audio track, and create another track with just the sound of the ground hum, and then invert the phase of the channel containing the hum?
    - Use Logic's Noise Gate or Strip Silence?
    - Is there a piece of kit I can buy that could remove the hum?
    FYI, I am plugging the Juno into the mains outlet at the wall and not through a powerboard.
    I look forward to any comments.
    Cheers,
    Mr Rock

    I can sympathize. Ground hum can be very frustrating to diagnose and eliminate. The ideas that you have suggested are all worth trying. You can lift the ground from the keyboard with one of those little adapters. You can get them at any hardware store. That can be the quickest, easiest and cheapest fix. Don't alter your keyboard by removing the ground prong from the plug or anything like that. The 3-2 ground lift adapter will do the same thing and it's reversible. If that's what the repair shop was suggesting, I'd find a new repair shop. If that's their idea of a solution, chances are they might have missed something while diagnosing the problem. A power supply problem in the kbd. would be one of the first things to check out.
    But, assuming the kbd. is OK, here are some other ideas.
    Have you tried a different audio cable to connect the keyboard?
    Have you checked the outlet(s)? Maybe you have a problem with your AC wiring that you didn't know about? You can buy a cheap outlet checker at the hardware store. Mine is a little plastic thing, about the size of a ground lift adapter, w/ 3 LEDs that light in different combinations to show wiring irregularities. Is the keyboard plugged into the same AC circuit as the rest of your gear? If not, try that.
    You could try the DI ground lift, too.
    It could be any piece of connected gear that is interacting w/ the kbd. to cause the buzz. My friend recently spent a few long days chasing down a similar problem only to discover - by accident - that it was his display monitor that was causing the problem. Ideally, you have to isolate the problem. The best way to do that is to completely disconnect (AC & audio cables) everything except the kbd, computer and interface and see of the problem is still there.
    Recording the noise separately and inverting the phase of that track should work in theory but I think you would have to record the noise-by-itself track in perfect phase w/ the noise-plus-keys track in order to cancel is completely. In any case, it would be an interesting experiment to try. If you can afford it, Izotope RX is very effective for this type of problem http://www.izotope.com/products/audio/rx/
    -John

  • IMac i7 humming

    Hi. Whenever I turn my iMac on, a second after the screen has come on something starts to spin up until it reaches it's maximum (like a fan on full whack). When on full whack it makes a humming noise almost like a vibration. If I lift the computer off the desk it is hardly audible. This issue I don't think was present on my first iMac which had a half dark screen but it was present on my 2nd iMac which had a perfect screen. Now my 3rd iMac has arrived today with the same humming issue and I think the screen is slightly yellow all over.
    I am fairly sure I am going to get a replacement but I was just wondering if anyone else has experienced this problem.

    DrRGrant:
    If you have no other problems, i.e., startup, freezes and restart, or shutdown, and the computer is functioning normally, then my first guess would be a fan but I don't know why, something could be mechanically wrong with it. But if it's racing at or near maximum then there is something more complicated then a malfunctioning fan. If not the fan, then it would be the HD. In either case, back up your material before returning it to Apple.

  • 311 movement (MB1B) - HUM

    Dear all,
    Is it possible to post a 311 movement (stock transfer from storage loc. to storage loc.) (transaction MB1B) when the source storage location is managed WITH handling units (HUM) and the destination storage location is NOT managed with handling units (NOR in WM)?
    Any input will be appreciated.
    Thanks, Annabelle R.

    I would do this way:
    tcode: HUMO
    select handling unit that you want to move from one location to another
    on HU list, select HU and go to menu: Edit > Change HU postings > Storage location
    Enter receiving storage location, confirm
    --> HU is transfered from WM-HUM issuing storage location to IM receiving location.
    If you check te material document behind - you will find movement type 311.
    Regards,
    Primoz

  • 24" iMac experiences?

    Hi everyone,
    I'm seriously considering splashing out and buying a 24" iMac, but I'm wary after reading a few horror stories on these forums. I understand that these people are probably (hopefully!) the minority, but I'm wary of spending all that money after buying a refurbished 20" iMac which didn't boot up properly (and has thus been returned to Apple).
    The problems I've read are humming issues and temperature problems - are these isolated incidents or are many of you experiencing these?
    Thanks for your help,
    Dan
    Returned faulty iMac Intel G5 Core Duo 2.0Ghz!   Mac OS X (10.4.8)  

    I upgraded from a 12" G4 1.25GHz PowerBook (driving a 23" Cinema Display). And yes, the 24" iMac is amazing! The PowerBook next to it looks tiny and puny.
    Good:
    - silent
    - display brightness
    - speed
    - being able to play games (not that I don't have anything else to do)
    Lesser:
    - I loved to be able to have different Energy Saver settings on my PowerBook (makes total sense). However, due to the fact the iMac will go to sleep (even while I'm downloading data via one of the internets), it would make sense to have different settings to choose from.
    - mine has the 'brightness-reduction-hum' (I called Apple to put it in my file)
    I went with the 2.16GHz model, but added another gig to 2 GB RAM, and the 7600GT card. Now that Apple gave us BTO, I figured I might as well use it and shell out the extra $.
    I'm very satisfied.
    24" iMac C2D 2.16GHz, 12" PowerBook G4 1.5GHz, 23" Cinema HD (for sale)   Mac OS X (10.4.8)  

  • How do those who don't watch boards find out about firmware updates?

    Since 'Software Update' doesn't alert users to firmware updates, I wonder how those that don't monitor these boards and other 'Mac news' sites find out about firmware updates?
    Yes, Boot Camp made headline news in many major newspapers and those who wanted to install it found they needed to update the firmware first.
    But, had I not read about it elsewhere earlier, I would not have known about the second MBP firmware update (which, apparently, solves some of the 'whine' issues - I've had no whining but I like to keep my firmware, in particular, up to date!).
    Just as a note to Apple - you've a database of all who have registered their MPB's (at least those with AppleCare if not those who simply run set-up with new Mac purchases). If firmware updates aren't included in the 'Software Updates' procedure, shooting off an email to those with machines that might be in need of firmware updates may save a world of grief to overworked phone support techs.

    Yes, I'm familiar with the support page but my point is that not all (in act, likely very few) are familiar enough with that page to go to "Top Downloads" to find firmware updates.
    On page 25 of the MacBook Pro Users Guide, Apple DOES suggest, in the next to the last paragraph, suggest "For support information, user discussion boards, and the latest Apple software downloads, go to www.apple.com/support."
    But if a new user is having problems he or she is more likely than not to pick up the phone first - and although there's the 90-day phone support and 3 year phone support for those who purchase AppleCare (which new users may not - particularly if buying from, say, CompUSA or other stores who push 'extended warranties' even with the purchase of products whose manufacturers already provide LIFETIME warranties) Apple has thoughtfully provided automated Software Updates (which Windows switchers understand all too well!) but no automated way to be lead to firmware updates. It's my feeling that if firmware notification were included in SU notifications, or via email, it might reduce the number of phone calls and result in happier computers.
    While I enjoy reading all the Mac news on a daily basis, a lot of users don't and there may be an even greater number who don't know the wheat from the chaff (or even know where to find the wheat!).
    Some firmware updates are critical, some of minor importance, and some (more and more of late, it seems) just a bit cryptic (for instance, 1.01 says "This firmware update is for (MacBook Pro)/iMac (early 2006) computers with Intel processors only. It now runs on localized systems that use languages that read right to left." and then lists the languages supported - which do not include Hebrew or Arabic, two "languages that read right to left".
    The only reason that I brought this up is that there are a number of sites that reported that the firmware update alleviates some of the 'whine' that some MBP users are reporting (and now I am reading of 'hum' issues - forget GarageBand! An hundred MBP's could replace a symphony!). Now is that true or not? Apple doesn't say - some users report yes, some no. And as there are no whine or hum issues on the iMac, I doubt 1.01 would 'solve' any of those problems with that machine (and interesting, too, that the "iMac (early 2006) Firmware Update 1.0.1" isn't in the "Top Downloads" section as is "MacBook Pro (early 2006) Firmware Update 1.0.1": what's up with that? Are there really more MBPs out there than Intel iMacs? Or are MBP owners running Windows in Arabic more than Intel iMac owners? Or just hopeful that the update does, indeed, help with the whine problem.
    I keep getting off topic (sort of)...
    ...my point is that it would be simple to notify, and simpler for (in my opinion), Apple to notify customers of firmware updates.

Maybe you are looking for