Hum When Playing iTunes Through Airport Express

I have recently rewired my surround system, and now I am getting a hum when I play music through my Airport Express. I made no changes to the A/V receiver as it pertains to the Airport Express. I get no hum when watching the TV, only when listening to music though the Airport Express. Any suggestions?

Might it be possible that you may have some form of Wi-Fi interference in the area that may be the source of the hum that you're hearing from the AX?
I suggest you perform a simple site survey, using utilities like AirPort Client Monitor (a part of AirPort Management Tools), MacStumbler, or iStumbler to determine potential areas of interference...and either, eliminate them or attempt to significantly reduce them.

Similar Messages

  • Playing iTunes Through Airport Express (PC)

    I am looking for advice to have success playing iTunes through my stereo speakers. The environment is PC and I have an Airport base station attached to my modem. The airport express is plugged in downstairs and I have the connection to the receiver to play through the stereo. My question is for the Express, am I setting up a new base station, or changing the config of the curent one? If so, what do I need to change on the configuration of the base station? I have reset it a number of times, but it continues to flash amber. It is an unsecured network----thanks for any assistance

    I’ve been using Airport Express 4.1.01 (AX) for several years for the sole purpose of wirelessly playing iTunes thru stereo system which is in a different part of the house from my Dynalink Modem-Router.
    I have recently bought a new Toshiba L/T with XP Prof OS and when I attempted to install AX I got an error message “A later version of iTunes is already installed on this machine. Installation cannot continue”. Current iTunes is V7. When I clicked OK on the error message I got the AX Introduction Window with the 3 icons (Internet, Music and Printer) appeared and over the top of the AX window another error message. “An error occurred while trying to use the wireless internet system” and the Next button on the AX window was dimmed. Once I clicked OK on error window Next button was available and clicking it I chose the “Set up a new AX” option and next the “Create a new wireless net work network” option.
    No Airport Express base station was found despite rescanning and also being in the same room barely 2 metres from the AX and in the same position where everything had worker OK on my previous L/T. Tired of rescanning I had no option but to cancel. However, AX seems to be installed.
    At this stage I followed Tesserax’s advice to thiels 17 (June 9th) pressed the reset button, connected my L/T to AX with an Ethernet cable and opened the AX Admin Utility. This opened Base Station Chooser. There are NO Tabs for either AirPort or Music Settings. Instead there are 3 Menu items – File, Base Station and Help as well as two buttons – Other and Rescan. I don’t have the information for the information asked by pressing Other.
    Maybe the AirPort and Music Tabs are on a later AX Version? When I attempted to update AX after downloading Airport V5.0.14 I was got the message “This update requires Airport V 5.0 to be installed. I can’t find V 5.0 to download if that is in fact the answer to my problems.
    Toshiba L/T   Windows XP Pro  

  • I get a radio signal when playing music through airport express

    Is there a way to change the frequency or anything?

    huh! what do you mean you receive a radio signal?
    the wireless signal between your computer/router and airport express is digital. in no way this signal could be mixed with an audio radio signal. if you have wireless interference you will experience music drop out.
    you get a radio signal, you probably have to review your audio connection. how are you setup from the 1/8" audio jack of the airport express to your audio system?

  • HT1595 I have just bought apple tv which allows me to play music through airport express but when  chose to watch a movie the audio comes from the tv and does not give option listen through other speakers served through airport express. Can you help me ?

    I have just bought apple tv which allows me to play music through airport express but when  chose to watch a movie the audio comes from the tv and does not give option listen through other speakers served through airport express. Can you help me ?

    No, you cannot seperate the audio and video stream.
    You can use optical audio to a sound system (I use sony sound bar) and play the audio via that.
    jules

  • Play iTunes via airport express?

    Hello
    I have a couple old airport expresses with a 1/8 in output to play music received from iTunes wirelessly. BUT, AirPort utility won't recognize either airport express (I have depressed the reset button on each for 30 seconds) and I see no option for remote speakers in iTunes.
    Is there anyway to play iTunes music through airport express? Is there another way?
    Thanks
    Doug

    Is this what you are looking for? http://docs.info.apple.com/article.html?artnum=93396
    or
    http://docs.info.apple.com/article.html?artnum=108071

  • ITunes through Airport Express sounds like cheap AM radio

    I have a wireless network through a router, but I could not get the Airport Express to play iTunes through it so I turned on the Airport in my iMac and successfully connected to it. Now iTUnes through my stereo sounds like a cheap AM radio and the yellow light doe not stop its slow flash like it is not connected. Any ideas?
    P.S. Just so you know, I am fairly new to Apple, after over 20 years with PCs, and brand spanking new to the Airport Express/iTunes thing.
    Thanks a bunch for any and all ideas,
    mikeylee
    24" core2duo iMac   Mac OS X (10.4.9)   This is my first Apple computer and I am lovin' it!

    A phono input expects a much different signal than a tape input. The signal from the AirPort Express (AX) is much greater amplitude and has a different equalization curve than a phono signal.

  • ITunes not playing/connecting through Airport Express

    Whenever I try to play a track in iTunes wirelessly through my Airport express iTunes always returns the error: "An error occured while connecting to the remote speaker "AirPort Express" The network connection failed".
    I can't work out what's wrong because the Airport light is green and connected to my router perfectly, there are no errors in the Airport utility and I can print wirelessly to the printer connected to the Airport using the Bonjour setup.
    I have Windows 7 and the latest versions of all software and firmware installed. Turning off Windows firewall makes no difference so it can't be that. I have tried everything I can possibly think of and have gottem nowhere. Please help!

    Darryl Rehr wrote:
    I have configured and re-configured my Airport Express, but I can't get it to receive music from iTunes.
    iTunes does recognize presence of Airport Express (named "Stereo Cabinet").
    However, when I select "Stereo Cabinet" in the pulldown menu, all I get is reduced volume output through my computer speakers... not through the stereo system hooked up the to the Airport Express.
    I've had this problem for months... posted here some time ago, but got no response.
    I am running 10.6.2 on an Intel Core duo Macbook laptop. This function used to work just fine, and I can't figure out why it no longer does. I think I had the same trouble under 10.5... but my attempts to figure it out were only sporadic (busy life, you know?).
    Can anyone help?
    DR
    sorry if i ask the obvious but have you enabled airtunes like so ?

  • When I connect my iphone directly to my receiver then connect to spotify, it plays through both speakers but when I connect wirelessly through airport express it only comes out through one speaker. Any thoughts?

    When I connect my iphone directly to the receiver through a cable, it plays Spotify just fine but when I try to play wirelessly through Airport Express, it only plays through one speaker. Any thoughts?

    yeah, that's what I figured.. I guess I'll try now to figure out exactly how to do that!

  • Is there a way to play my macs computer audio through airport express?

    I have a stereo receiver that only plays through the auxillary port, and i have been using airport express to play my music and movies in itunes through it. Some of my other movies however are neither in itunes or playable through itunes. Is there a way to send the computer's audio output (not just itunes) through airport express and thus into the stereo receiver? Much help would be appreciated, thanks!

    Try using Airfoil.
    (62000)

  • Can't play music via Airport Express

    I've successfully played music through Airport Express before, but for some reason I keep getting this error message now: There are no speakers connected to the Aiport Device "Living Room".
    I have connected Harman Kardon speakers and subwoofer connected to the Airport, but it must not be recognizing the connection. I believe I have it correctly set up on the computer end...any thoughts?

    Are these speakers USB or are they connected with the 1/8" audio jack? What is your setup from pluging the audio speakers and the subwoofer?

  • When playing iTunes from 2006 MacBook via Airport Express remote stereo speakers, the music keeps dropping in and out

    I've tried hours and a trip to the Apple Store to resolve this problem, and no luck so far.
    We have two Airport Expresses -- one is an older "g" version (from 2006), one is a newer "n" version (a couple of years old).
    We have one older MacBook (from June 2006) (so it can only use "g" wireless and also cannot be upgraded to OS X 10.7 "Lion").
    We have one MacBook Air and an iMac (both less than a year old), an iPad (about 2 months old), and a recently acquired AppleTV (in the past few weeks).
    We also have two iPhones that do use our local wireless network on occassion.
    We have stereo speakers that are currently connected into one of the Airport Expresses.
    For years (until the past few weeks) I played music from iTunes on my first generation MacBook to the speakers with no problems (using the older "g" Airport Express).  Recently, however, when playing music remotely over the speakers we have gotten fairly regular (though at random intervals) drops of the music in and out (drops are for a second or two each).  So far, here's what we've tried to do:
    (1)     Went to the Apple Store, where they thought the problem might be compatability between the g and n equipment in our house.  They suggested that we get an Airport Extreme and use that as the base so that 2.5 GHz and 5 GHz networks could each be set up, allowing the two systems to play nicely.  Spent a couple of hours setting everything up.  No dice.
    (2)     The skipping happens even when (a) I turn off the Apple TV; and/or (b) turn off the older Airport Express and just use the Extreme and the "n" Express (with the "n" Express as the connection to the stereo).
    (3)      When I have the wireless network drop-down menu selected on my MacBook, the skipping occurs immediately after the computer is "looking for networks" (as shown at the top of the menu).  The computer does this at random intervals on a regular basis.  The skipping, however, will occur even if the menu is not selected.
    (4)     Here's the weirdest part.  The skipping has even occured when playing iTunes from our newish iMac, with the older MacBook shut down, with the older Airport Express shut down.  In this case, the skipping only appears to occur when we have the wireless network drop-down menu selected and again, it occurs when the computer is "looking for networks" which occurs at random intervals.  In this situation, the skipping only seems to occur when the menu is selected.
    At this point, if I can't find another solution, I'm going to return the Airport Extreme, and just give up playing music over our stereo speakers from the MacBook (and instead transfer music to the iMac and play from it).  But I thought I'd try a last-ditch effort to ask for help to see if anyone could figure out what might be causing the problem.  I would chalk it up to the problems of using my old "g" network MacBook on a newer "n" system (though I'm not about to spend $1K+ to upgrade my laptop just for this), but for (4) above, which seems to indicate something else is going on.
    Any help would be most appreciated!

    Unfortunately, your description of the problem and the placement of both your main and AirPort Express routers does lend itself to believe the problem is most likely Wi-Fi interference. If it isn't the microwave or portable phones, it could be obstacles like walls between the routers that may be preventing the stream from consistently reaching the Express.
    In your configuration, the stream will first travel to the main router, and then, from the main router to the AirPort Express. If, for example, you started the stream in the same room as the Express, that stream would have to travel across several rooms at least twice.

  • I recently got an iphone 5S and my songs not purchased from iTunes are grayed out (phone only) and are skipped past when playing them through my iPhone.

    I recently got an iphone 5S and my songs not purchased from iTunes are grayed out (phone only) and are skipped past when playing them through my iPhone. i have tried the following:
    1) Removing all music from phone and resynced to iTunes PC library.
    2) Erased phone and restored from back up
    3) Erased phone and started as a new iPhone
    4) Reformated the music files in my library that weren't playing
    5) Deleted songs from iPhone and computer and re-imported CDs
    6) Tried to redownload my COMPLETE MUSIC LIBRARY from iCloud.
    7) I have also turned it off and turned it back on several times
    8) I tried syncing through my macbook (only moved partial songs to it to see if it would even work).
    9) I have tried to get Siri to play them, did not work.
    10) All music does play fine on my iPod Touch 3rd (iOS6 i think) gen and iTunes on Mac and PC
    11)  I added a CD to my roommates iTunes and it plays on their iPhone 5S but not mine.
    After all of these things it is now WORSE!!!  My iTunes purchased songs are now experiencing the same issue along with some (not all) of the original music files that were skipping and grayed out.  My conclusion is i have no clue at this point!  I have done everything i have found online in EVERY discussion, i have spent over 60 hours trying to get this to work and i am asking myself, i bought this product why am having to fix this when it worked just fine on my iPod touch (3rd Gen) and iPod Classic!!!!  PLEASE APPLE FIX THIS ISSUE FOR US!!!! 

    I had this problem too after i upgdatd to OS X Mavericks... only the songs on my iphone 5s that i purchased from itunes would play.
    i read something about it being a syncing issue. when you plug your phone into your computer with the usb cable, the person said to switch from automatic syncing of itunes to the "manual" option. mine was already set to manual so i wasn't sure anything would work. BUT, when i plugged my phone into my computer, it started to sync all of my music on my phone again (top of itunes bar where song playing/time is listed said "now syncing 123/534 songs to x's iphone"). once that was completed, i checked the music app on my iphone and everything was back to normal!
    so, i would suggest setting your music syncing settings to manual if you haven't tried that yet!
    hope this helps!

  • Error message when I try to stream iTunes over Airport Express

    When I try to stream iTunes over Airport Express, I get an error message: An unknown error (-15006) occurring while connecting to the remote speaker. This just started happening since I upgraded to iTunes 9. Is there a fix?

    When I try to stream iTunes over Airport Express, I get an error message: An unknown error (-15006) occurring while connecting to the remote speaker. This just started happening since I upgraded to iTunes 9. Is there a fix?

  • Recently I purchased a tv show on iTunes when playing it through apple TV it constantly renders while playing

    Recently I purchased a tv show on iTunes, when playing it through apple TV it constantly renders while playing on the Samsung tv which takes forever too watch.
    Hope someone can advise if I am doing something wrong.
    My laptop is directly under the tv however my modum is in another room so it is operating through Wifi.
    Thank you

    Restart all devices and the router to see if it helps.  May or may not.
    If you Purchased in iTunes on the laptop ensure you are playing back on AppleTV via the Computers icon not under the main TV Shows icon which will reload from the web.
    I would move the laptop away from the TV in case it's causing interference to teh wifi though clearly an AppleTv might have the same issue but is designed to sit next to the TV.
    If you were playing via Computers and it's still slow you could connect an ethernet cable between AppleTv and laptop, keep wifi on the laptop for internet via the router, and enable intrenet sharing over ethernet in System Preferences > Sharing so AppleTV can do an internet authorisation.  Hopefully restarting iTunes/router will just do the trick though.
    Do you have any non-Apple security software eg NetBarrier, if so try disabling to see if it was detecting AppleTV as an intrusion threat due to multiple connection attempts.

  • No colors when printing through AirPort Express?

    I knew I couldn't use all the features (e.g. scanning) of my HP all-in-one printer F2180 through AirPort Express instead of USB. But is it normal I can't print in colors? Can it be fixed?

    I am having the same problem. I am running an AirPort Extreme to a HP Deskjet F4180.
    I spent two weeks on the phone and email with HP and they finally told me that it was a problem with Apple.
    I just got off the phone with Apple support and they told me it is a driver issue which they have no control over. They told me to see if somebody in this forum had a work around or to search the web for a generic driver that "may" fix the problem.
    If I find an answer I will let you know.
    Good luck!!

Maybe you are looking for

  • Manual payment is not allowed - Order type for payment

    Hi I 'm doing a rebate payment, but when I want to input a manual payment, I get "manual payment is not allowed for this agreement type". I moved to 'define agreement type' hoping , filling the "Payment procedure" to "C" might resolve this issue. How

  • How to pass a list as bind variable?

    How can I pass a list as bind variable in Oracle? The following query work well in SQL Developer if I set ":prmRegionID=2". SELECT COUNTRY_ID, COUNTRY_NAME FROM HR.COUNTRIES WHERE REGION_ID IN (:prmRegionID); The problem is that I can't find how to s

  • Blank column in a chart

    Hi gurus, I'm trying to insert a blank column into a column chart because the columns of different measures are together. I tried to insert a blank serie and it works, but if I show the legend, I have a blank value into the legend and I can't hide it

  • ATI 5750 and Photoshop CC ISSUE

    I'm having driver issues with the ATI Radeon HD 5750 and Photoshop CC. You can see from the screenshot the lines going through the image I have contacted Adobe they are aware of the problem.  Its in your hands now Apple to resolve

  • Can't encode some MEPG files

    Hello, We have to encode about 60 videos from the MPEG format to FLV. The CS3 Video Encoder can't encode some of them. I got an error window with the message : Une erreur interne d'application s'est produite. In english, that means that an internal e