Hung up on 4 times in a single hour
I recently had some repair work done on my fence. I called 811 and had a crew come out to mark lines. The crew did mark any lines anywhere near my EAST fence. I thought this was odd so I had them come out a 2nd time and specifically told them the fence I was replacing and to mark anything near there. Again, no marks were painted within 20ft of the fence.
My fencer cut a wire that was 1 inch away from my fence almost immediately. I was very upset but was happy that it was repaired the same day. However, my attitude was completely change now that I received a bill from CMR for $282.60 for a verizon drop wire repair job. This is ridiculous.
So I called Verizon and told a represenstive what happened. He said he would trasferme to the damages department (?). He instead sent me to a new account activation line.... 100% automated, no way back to the rep. I hung up.
So I called Verizon again and told a different representative what happened. He said it sounded like fraud... after waiting 15 minutes on hold, I was sent back to the original phone tree asking me what I needed help with....
So I went through the automated phone tree and reached a 3rd representative. I told him what happened and he assured me he would stay on the line until I was connected with someone that could help. I was only hold for almost 20 minutes with the rep checking in every 3-4 minutes to let me know he was still there. He finally said he had someone and he was going to connect 3-way with them. Then I was hung up on.
So I called verizon for the 4th time. Got a new rep and explained the situation. I was put on hold for 15 minutes and he told me that I need to contact the fencers to pay the bill! That's not going to happen. The lines weren't marked to begin with. Then he said I need to contact the marking company for them to pay my bill! Are you kidding? I am supposed to call a random company and say "pay my bill, please?" He said he could connect me to a technician to see if he knew what to do, so I agreed. I was then hung up on. WOW
So here I am on this board. I have a bill for $282.60 and no one seems to be able to help me. Does anyone know what I should do?
Rob
Hi legacy15,
Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you. Please go to your profile page for the forum and look at the top of the middle column where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under "My Support Cases" you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe". Please keep all correspondence regarding your issue in the private support portal.
Similar Messages
-
Can't print a photo multiple times on a single page
I just installed iLife 8 and am trying to print one 3X5 photo multiple times on a single page. When I consulted the help menu in iPhoto, I found what I thought was the answer. When I followed the instructions, I hit a snag because I don't have the Photos Per Page pop-up menu it references. Any ideas on how I can do this to save paper?
Here's what the help menu said:
Printing one photo multiple times on a single page
If you have a favorite photo you want to share with many people, you can print multiple copies of that photo on a single page.
To print one photo multiple times on a single page
Select the photo you want to print.
Click the Print button.
Select the paper size (such as letter-size or legal-size).
Select the print size (such as 2 x 3 or 4 x 6).
If you want to make the photo a custom size, select Custom.
Click the Customize button.
Click the Settings button.
Select “Multiple of the same photo per page” from the Photos Per Page pop-up menu.
iPhoto will zoom and crop the photo to fit the space available. To make a photo appear full-frame, Control-click the photo and choose “Fit Photo to Frame Size” from the menu that appears.
Click OK.
Click Print.Well don't I feel stupid! I just installed iLife '08 and assumed that it would tell me right away if I needed any updates. I found and installed the needed updates (7.1.1), I got the right settings drop down menu to print multiples on one page. Thanks for your help
-
To open a window & html page at a time on a single button, in JSP.
Hello!
I want to open 1 window as well as i want to open 1 html page on a single button click at a same time, in JSP.
on button's "action" event i am opening the html page and button's "onclick" event i am opening the window, but it is not showing these 2 actions at a time. only window gets open when i click the button.
[Also on form's "action" event i am having validate() function.]
how do i open a window & html page at a time on a single button, in JSP?
I don't know how to do this. I have stuck over here, if anyone is having any solution, please let me know.
I need your help.
Thank You.write js as
window.open(page, "Popup", windowprops);
windowprops = "height="+hi+",width="+wd+",top="+ wint +",left="+ winl +",location=no,"
+ "scrollbars=yes,menubars=no,toolbars=no,resizable=no,status=yes";
encapsulate this in one function and call that function on button click event !! -
Is it possible to print more than one picture at a time on a single page and if so, how?
is it possible to print more than one picture at a time on a single page and if so, how?
Hi Rowegarth.
HP Photo Creations offers several ways to print multiple photos on a page. Here's a link to some preset grids. If you don't have HP Photo Creations already, you'll be prompted to download the software. (It's a free download.)
You could also start with a "Design Your Own" collage print with a white theme.
This video shows some ways to print multiple photos in HP Photo Creations to make them easier to cut out:
www.youtube.com/embed/VRoGjhXPm4I?rel=0
The beginning shows an older version of the software, but the second half (at 1:17) explains the grid settings.
Hope this helps,
RocketLife
RocketLife, developer of HP Photo Creations
» Visit the HP Photo Creations Facebook page — news, tips, and inspiration
» See the HP Photo Creations video tours — cool tips in under 2 minutes
» Contact Customer Support — get answers from the experts -
Query - Get data from the same table and field two times on a single line
I have prepared a query showing the bill of material. At each line each component will be a new line and I want to have the description of the material at the top (the master material composed of the component ones) and also the description of the component materials on the same line. This means that I should be able to use MAKT table 2 times on a single line of the query. I have used the query tool with SQ01 and SQ02 tcodes. How can I get the the description of the material at the top and also the description of the component material on a single line?
Thanks in advance for the answers.Yasar,
Any time you wish to use a table twice in an SQ01 query, you have to create an alias.
SQ02 > select the infoset, 'change' > go to Join definitions.
Select 'Alias' button. Create. Select your table name (such as MAKT) and define an alias, such as 'COMP_MAKT' for component descriptions.
Now you can insert the Alias table into your infoset just like it was a regular table, and use standard join method to join COMP_MAKT to your component material number.
Best regards,
DB49 -
How can I add recording time to a single recording not a series recording?
If I set-up a series recording it allows me to add minutes to the recording time why can't I add time to a single recording? For example if I want to record a single show tomorrow I find it on the guide and hit record. Now I want to add a few minutes on the end of the show because I know it always runs over it's advertised time why can't I add the time? It doesn't gives to extra options for a single recording. The only time I can add time to a single recording is if the show is currently on then it allows me to add time but, not before the show is on. So what good does that do? Comcast allowed me to set-up extra options to a single recording.
Actually you can. It's a bit clumsy but what you have to do is go to the DVR menu, select scheduled reordings, select the recording you want to extend, scroll through the menu and you will find an option to modify the start / end time.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem. -
To print one photo multiple times on a single page
The title of my question is the title of the page in iPhoto 8 help.
"To print one photo multiple times on a single page"
It says (a bit shortened) 1. Select photo 2. Click print button 3. Select paper size 4. Select print size 5 Click Customize button 6 Click Settings button 7. Select "Multiple of same photo per page from the Photos Per Page pop-up menu. 8 Click OK 9 Click Print.
I can not find the pop-up menu referred to in Step 7. There are two "settings" buttons - neither produce a Photos Per Page pop-up menu. Settings appears if you click a double arrow to the right in the lower margin but only deals with font issues and "Print Settings" does not offer such a pop-up.
I am using Leopard on a PowerBook G4 and just bought and installed the newest iLife 8.
Grateful for help.Arthur:
When you click on the Customize button there will be a Setting button in the next window. Click on it and in the drop down window that comes up will be the option to print multiple photos of the same photo per page.
Select that option and click OK. You'll get the spinning cursor for a few seconds as iPhoto creates the multiple copies on the page you selected. Be sure that the print size is small enough so that you can have multiple copies of it on the paper size you selected.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file. -
Measure the average read time of a single database block for hardware.
Hi,
how to Measure the average read time of a single database block for hardware ?
Many thanks.Hi,
A STATSPACK report has data file level I/O tunings, but they include buffered reads, so they are biased.
Try this in 9i:
http://www.dba-oracle.com/oracle_tips_cost_adj.htm
select
a.average_wait c1,
b.average_wait c2,
a.total_waits /(a.total_waits + b.total_waits)*100 c3,
b.total_waits /(a.total_waits + b.total_waits)*100 c4,
(b.average_wait / a.average_wait)*100 c5
from
v$system_event a,
v$system_event b
where
a.event = 'db file scattered read'
and
b.event = 'db file sequential read';
Or this, in 10g:
col c1 heading 'Average Waits for|Full Scan Read I/O' format 9999.999
col c2 heading 'Average Waits for|Index Read I/O' format 9999.999
col c3 heading 'Percent of| I/O Waits|for scattered|Full Scans' format 9.99
col c4 heading 'Percent of| I/O Waits|for sequential|Index Scans' format 9.99
col c5 heading 'Starting|Value|for|optimizer|index|cost|adj' format 999
select
sum(a.time_waited_micro)/sum(a.total_waits)/1000000 c1,
sum(b.time_waited_micro)/sum(b.total_waits)/1000000 c2,
sum(a.total_waits) /
sum(a.total_waits + b.total_waits)
) * 100 c3,
sum(b.total_waits) /
sum(a.total_waits + b.total_waits)
) * 100 c4,
sum(b.time_waited_micro) /
sum(b.total_waits)) /
(sum(a.time_waited_micro)/sum(a.total_waits)
) * 100 c5
from
dba_hist_system_event a,
dba_hist_system_event b
where
a.snap_id = b.snap_id
and
a.event_name = 'db file scattered read'
and
b.event_name = 'db file sequential read'; -
Session time out up to # hours for Interaction center
Hi Experts,
I want increase the web ui session time out up to # hours. I tried using SMICM and Technical Profile. But using these options i could not achieve such long session. I tried using RZ 11 icm keep alive parameter, but the effect will apply for all the applications in the CRM WEB UI.
I want do this for only Interaction center application not for all other application in CRM WEB UI .
Please help me how I can do this.
Thanks
DineshHi Dinesh,
This cannot be achieved without development enhancements to some standard SAP framework component, to introduce a "keep-alive" concept. If you are using a CMS for CTI or email integration, you need to ensure it supports keeping the communications session alive also.
Sincerely,
Glenn
Glenn Abel
Covington Creative
www.covingtoncreative.com -
I've tried downloading iOS5 several times and after an hour each time I get a message that says my network connection has timed out. But I can't find any information about "timing out" or how to correct the situation. Any help?
Disable your antivirus and firewall, and try again.
-
How do I get a time value in days, hours and minutes returned to a cell from a calculation of distance divided by speed?
Simon,
you can use the duration function:
B4=DURATION(0,0,B1/B2)
you can further, format the cell as a duration like this using the cell inspector: -
I am having trouble transferring files from an old MacBook (2007) to a MacBook Air over a wireless network. The connection was interrupted and the time was over 24 hours. Is there a better way to do this? I'm using Migration assistant. The lack of an ethernet port on MacBook air does not help.
William ..
Alternative data transfer methods suggested here > OS X: How to migrate data from another Mac using Mavericks -
Why doesn't siri know how to change the time of a reminder? When asked, "Do you want to confirm or cancel your reminder?" Reply, "Can I change the time to a half hour later?" Siri doesn't know how to respond.
Hi
In iMovie'11 (version 9.0.x)
on top menu row - Apple/iMovie/File/Edit/Cut (Can vary dep. on language - in Swedish Apple/iMovie/Arkiv/Redigera/Klipp . . . )
down Cut menu - Slow playback/Raspid Playback/Re-play in Slow Motion and onvards
Here one can select the Pre-Set speeds
Are you familiar with getting 'inspector' to run?
No - but I guess that Double Click on clip/sequense or ctrl-Click on it might open it.
Yours Bengt W -
I am using 10.9.1 on a 21.5" iMac. I am backing up using Time Machine. The hourly backups are over kill. How do get TM to backup daily, only?
See Pondini's TM FAQs, for details.
-
I had backed up my IPhone 4s on iCloud on Jan 19. I am now trying to do another back up but it says the time required is 7 hours. It appears to long a time for 1GB of data stored on the iCloud. Can someone help me please?
To be honest, that sounds about right.
For example on my 8Mbps (megbits) down service I get around 0.4Mbps upload. That is the equivalent of (very approximately) 3Mb (megabytes) per minute or 180Mb per hour. Over 7 hours that would be just over 1Gb.
Obviously, it all depends on your connection speed, but that is certainly what I would expect, and that is why I use my computer for backing up, not iCloud. So much quicker.
Maybe you are looking for
-
Wireless connected- yet every program not
I have a wireless router and an imac g5 and an ibook g4. they have both been connected to the internet via the wireless router. then suddenly my ibook g4 lost its connection while the g5 is still connected. the ibook says it is connected, however, sa
-
After I close Bookmarks menu, the bottom part of list stays at bottom of Window, not happen on IE9
After I open and then close Bookmarks, to select an item, at the bottom of the Window part of this list remains, which is annoying. This does not happen with IE
-
Specifying a blank criteria for a smart album
In iPhoto 9.2.1, how do I create a smart album of photos with blank descriptions?
-
Bridge will not display my image.
Here is what I get when I try and view an image in Bridge. It has been working fine and then all of a sudden I can't view images. Thanks!
-
my ipad won't turn on and I can't restore it because itunes needs me to input my security code and I can't because it's a gray screen