Hunt Group phones ring but caller gets silence

Hi,
Have a problem where a call ends up hitting a Hunt group pilot number and the phones in the hunt group ring as expected but the caller only gets silence until the call is answered ? If I call the pilot number direct it works fine.. Weird.
CCM 4.1.3
Matt.

Have a problem where a call ends up hitting a Hunt group pilot number and the phones in the hunt group ring as expected but the caller only gets silence until the call is answered ?
If I call the pilot number direct it works fine.. Weird...
You mean the call first hit other number like another DN then CF to the PP (Pilot Point) it doesnt work? Calling from PSTN or internally?
Please clarify
Thanks

Similar Messages

How do I switch from headphones back to regular volume if I use my headphones I have trouble with regular communication the phone rings but I cannot hear the speaker

HOw do I switch from headphones back to regular volume.if I use my headphones I cannot get the volume to work for incoming calls the phone rings but I cannot communicate

Do you have a screen protector on? At times of poorly made it will cause problems with the sensor for the screen lighting

How do I turn off Headphones? My phone rings but all other alerts have been changed to headphones, so no sound. (tried sounds, settings, manual side buttons)

How do I turn off Headphones? My phone rings but all other alerts have been changed to headphones, so no sound. (tried sounds, settings, manual side buttons)

As was already said: the camera's interpretation of the raw data is just one interpretation, and not the same as Adobe's. Don't confuse it with "exactly how they were shot", as this doesn't apply when shooting Raw. Granted it IS the manufacturer's interpretation, but you wouldn't be shooting Raw and using Adobe Camera Raw if you thought the manufacturer was always right.
One thing nobody has mentioned is Adobe's "baseline exposure" compensation factor. Camera Raw adjusts the default preview exposure by a factor of EV based on their measurements of the camera sensor. My present camera is boosted by 0.35EV and my last camera by 0.5EV. There is a way of determining this using EXIFTOOL, but I can't remember how to do it offhand. For the last few years, I have adjusted my own Camera Raw defaults by reversing this compensation, so it more closely matches the exposure I was expecting.
EDIT: here's the procedure, if you're interested. Re: Baseline Exposure

HT4061 my screen is not displaying it is black. The phone rings but nothing displays, this is the same when I receive a text

My screen is not displaying it is black. The phone rings but nothing displays, The same is happening when I receive a text.

Hi there Mrunner,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
-Griff W.

HT201269 hi, i have just upgraded to the i phone 5 from the 4s, i have done a back up and transfrerred all content to my i phone 5 but cannot get apps to trasfer how do you do this please?

hi, i have just upgraded to the i phone 5 from the 4s, i have done a back up and transfrerred all content to my i phone 5 but cannot get apps to transfer how do you do this please?

Apps are not part of the backup. You need to sync them to the iPhone from iTunes on your computer or re-download them from the iTunes Store. For the latter option, see:
http://support.apple.com/kb/ht2519
Regards.

BT Hub Phone Ringing but no call connection

Evening
I hope someone can assist - the home hub phone rings when there is an incoming calls but when I try to connect (by pressing the green phone on the hub phone) there is no one on the other end.
Ideas?

You have to make sure you check the corrcet 1471, as one for hub phone and a seperate one for the landline (i.e. if you ring your landline and try 1471 from the hub phone, no call weill be left).
I'm not usre if the caller display not working is indicating a fault with the hub phone (cant remember if my hub phone shows the ID when you call the landline or not)
it might be worth trying the old 'turn it off and on again' try disconnecting the batteries from the hub phone, if this doesnt solve then try a power down cycle on your hub (techspeak for turning it off and leaving off for 45 seconds).
if still having a problem, your best bet is to log on to bt.com and report it through the web, or if cant, call the tech support to go through the settings with you (they will also test to see if there is a fault with the landline, hub phone or hub)

CUCM 9.0 Hunt-Group Phone( all phones in the hunt group) reset

Hi,
we have 7945 , 03 phones with attendanat consoles connected , all three phones get reset at the same time ,
this happens once each 4-5 days time, these three phones are conencted to LAN using two different switches ,
so it cannot be a problem with the switches , or conenctivity , ( other phones do not reset at that time , only these three phones which are in the same hunt group reset )
please advice us

Hi,
There is no option to check on your phone on who picked up the call in the pickup group. Please check the following link for the behavior of 89XX and 99XX IP phones
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/9971_9951_8961/10_0/english/userguide/P567_BK_UB293500_00_userguide-8961-9951-9971-10_0/P567_BK_UB293500_00_userguide-8961-9951-9971-10_0_chapter_0100.html
"Hunt group and multiparty calls show an icon to the right of the caller ID that differentiates the call from a normal call."
HTH
Manish

How can you make phone ring but text vibrate

How do you set your phone to ring but all other notifications ie texts &emails vibrate?
This question is for iPhone 4 & 4s

As i mentioned up top, you can do this with a silent ringtone. I have read some app's have muted ringtones(don't know of the app name though) OR, GarageBand can make ringtones on Mac. (that is where i think you would need further explaining on, if you have Mac).
The silent tone will be set as text's tone (as the same if it made noise), it will vibrate two times quick...While asleep, awake, on a phone call, still texting, at almost any time i can think of, (other than powered OFF.)
I have recommended this method, for people asking as a regular ringtone, for telemarketer's, unknown callers, and other sort of people. And YES, you will need the Vibrate turned on.
Hope this helped.

How to set the number of rings for the agent phone rings before it get the not prepared state

hi, how to set the number of rings for the agent phone rings? before it get the not prepared state.
thanks

The following assumes that you are using ICM with an IPIVR etc (not using CVP), as the answer is different for CVP
What you are looking for is called "Ring no answer time". It is set in the Agent Desk Setting List tool.
Regards,
Kevin

HT4623 when i get a call or make one I have to use the speaker phone.I hear nothing after the phone rings but when I hit the soeakerphone icon i can hear the caller but so does everyone else.

When I receive or make a phone call, I have to hit the speaker phone icon to hear the conversation and so does everyone else around me.
My phone was perfect until I updated to the newest version.
The person making the call can hear me, but I cant' hear them until I push the speakerphone.
Any resolve to this please and thankyou.

Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

Phone rings but cannot hear caller on other end

I've only had my phone for a few days and something has gone terribly wrong! The phone seemed to be working fine until I downloaded the BlackBerry Handheld Software v4.5.0.152 (Multilanguage) update late last night. This morning I noticed while reviewing the ring tones already on the phone that I could not make them play, but I thought maybe I was doing something wrong because I was able to hear them when I first started using the phone.
Immediately after the software update I had to change the radio settings so that I could access the internet again (radio settings I think). Is there a setting on the phone I need to update, or something else I can do to resolve this?
Thanks very much in advance!
Solved!
Go to Solution.

So, to be clear, it occurs, you pop the battery, things work fine for a while, then it occurs again, and you must again pop the battery?
Is that release of the device OS that you installed certified by your carrier? Or is it a leaked version? You can check your carrier's release here:
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
You might also try reloading the device OS -- something may have gone a bit wrong during the install last night.
KB11320 How to perform a clean reload of the BlackBerry Device Software using the Application Loader tool
Otherwise, if it persists, you should contact your carrier (if it was a sanctioned OS release) and let them know.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

After 4 or 5 rings the call gets dropped instead of going to voicemail.

I recently upgraded to callmanager 7.1 and now whenever anyone calls our main number, if we do not anwser it within 4 or 5 rings it will drop the call, instead of going to voicemail.
Please help and thanks
George

Hello George.
Since you have upgraded, I'm assuming that CFw was working before.
Have you checked the CSS in the Forwarding section of the line?
Also try calling the same number internally and let it forward to voice mail. Does it have same symptom? Even if it fails, by any chance do you see the number on the calling phone changed to Voice mail pilot number at all?
Thanks
- abu

I phone 4 backlight only, phone rings but touch sreen dosent work, help please

right, about two months ago my phone was just black with a backlight.the phone still rung and the touch still worked, i was going to take it to the shop but diddnt have time and just forgot about it and got a new phone. now its the same but i cant touch the screen to unlock it to back it up. it has been smashed twice but fixed could that be to do with it...any body know what has happened or how to fix???

The LCD display has failed. From the way your post reads it's time to let go of the past and move on with the future.
Hope that helps

My phone is on wifi in my house and i don't hear the phone ring on calls or text messages most of the time. help

I miss most calls and texts help with settings. some calls ring and some dont and we have weak signal in our area. and have wifi at home. and some calls dont ring and most text dont signify when they come through. help i am lost.

Check to see if the mute switch is not set to mute.
After that, check to see if Do Not Disturb is on. Lastly, if you have weak signal at your home, this could be what is causing you to miss calls.

Cannot hear phone ringing when calling also cannot hear called pickup and talk

3G I have checked speaker by using ringtones, also not on vibrate

I had the same problem like you. I can hear from the speaker, and when doing a recording and play back via the speaker. My iPhone 4 is out of warranty so I just got it fix at the small repair shop and cost me S$50. The repair guy did the above test and comfirm it is faulty of a small component, total tiem taken to fix my iPhone is about 10mins..

Hunt Group phones ring but caller gets silence

Similar Messages

Maybe you are looking for