Hunt Groups to login
Can you create a hunt group for multiple users to login in CM5.x so as to use it like a helpdesk environment and you can track whether the user has logged in or out of the queue. Any help would be great
Hi Satu,
Just to add a note to the great tips from Pam and James (+5 points each folks :)
Don't feel stupid my friend, there are so many acronyms in this business it will make your head spin :)
ACD = Automatic Call Distribution (calls are distributed between active/logged-in Agents)
This term relates to Call centre applications like UCCX.
As to Hunt Group Login/Logout, sadly this feature is only available CCM 4.2 and CUCM 6.x/7.x with the Login/Logout of Hunt Groups feature (as James nicely noted). This is not available in CCM 4.1.3 or 5.x. Have a look;
Log Out of Hunt Groups
The Log Out of Hunt Groups feature allows phone users to log their phones out from receiving calls that get routed to directory numbers that belong to line groups to which the phone lines are associated. Regardless of the phone status, the phone rings normally for incoming calls that are not calls to the line group(s) that are associated with the phone. The phone provides a visual status of the login state, so the user can determine by looking at the phone whether they are logged in to their line group(s).
The Log Out of Hunt Groups feature also comprises the following components:
The HLog softkey allows a phone user to log a phone out of all line groups to which the phone directory numbers belong. Configure the HLog softkey in the Softkey Layout Configuration window. When the user presses the HLog softkey, the phone screen displays "Logged out of Hunt Group." When the user presses the HLog softkey again to log back in and receive hunt group calls, the "Logged out of Hunt Group" notification on the phone screen clears.
The Hunt Group Logoff Notification service parameter in the Clusterwide Parameters (Device - Phone) section of the Service Parameters Configuration window for the Cisco CallManager service must be configured to enable this feature.
Hunt Group Logoff Notification Service Parameter
The Hunt Group Logoff Notification service parameter in the Clusterwide Parameters (Device - Phone) section of the Service Parameters Configuration window for the Cisco CallManager service provides the option to turn audible ring tones on or off when calls that come in to a line group arrive at the phone and the current status of the phone is logoff. The default value specifies None, which causes the phone not to ring.
The Log Out of Hunt Groups feature, which is device-based, operates differently for non-shared lines and for shared lines.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/4_2_1/ccmsys/a03rp.html#wp1091630
In the CCM 4.1.x and 5.x trains there is really not an equivilant feature. The best you can do is probably using AC Hunt :(
Hope this helps a little!
Rob
Similar Messages
-
How to enable HLog for B-ACD Hunt Group
We are using B-ACD for imcoming calls, the hunt group for BACD has 5 members. I want people to be able to login/logoff from this hunt group.
I have this working with the DND button, but then the phone doesn't ring when the extension is dailed directly. So it seems the alternative is using another feature/button called "Hlog".
I've added the HLog softkey but nothing happens when its pressed. I can't seem to find instructions on what else might need to be done to enable HLog.
Here is a bit of the related config info
ephone-template 16
softkeys idle Redial HLog Cfwdall Pickup Dnd Mobility
softkeys seized Cfwdall Endcall Redial Pickup Gpickup Callback
softkeys connected Trnsfer Endcall LiveRcd Hold Mobility
ephone-dn 15 dual-line
number 206
no-reg primary
label 206
description Kathy
name Kathy
call-forward busy 299
call-forward noan 299
timeout 10
ephone 6
device-security-mode none
video
mac-address 0021.1BFC.BF2B
ephone-template 16
max-calls-per-button 2
username "kathy"
password 1112
type 524G
button 1:15
ephone-hunt 50 sequential
pilot A888
list 204, 205, 201, 206
timeout 8, 8, 8, 8
no-reg pilot
statistics collect
auto logout 3
description *** CCA BACD ***
display-logout All agents logged outWe still don't have Logging in and out of the BACD Hunt group working.
The #350 and *350 don't seem to work. On the phone when I dial them it connects for a second then disconnects, no feedback if it worked. But when I try calling our business number the phone still gets rung in the hunt group sequence. So the phone isn't getting logged out.
On some of the phones I can see the "HLog" button but when pressed it says "that key is not active here". -
Old AC hunt groups vs. post CCM4.X line groups
This is old gripe I have with CCM 4.X and I want to know what others think about it.
From very early versions CCM has had the AC hunt groups that had the neat feature of being able to specify AC usernames and line #s as hunt group members as well as DNs as hunt group members. You could mix and match for robust scenarios.
Starting with version 4.0 line group/hunt list/hunt pilot was introduced. Also the "busy trigger" for DNs was introduced.
The new LG/HL/HP model introduced a much better feature set for hunting. It also observes the "busy trigger" such that if a person is on a single phone call and his/her DN is configured with a busy trigger of 2, the call will still hunt to that user.
Problem 1: The old AC hunt group does not observe the busy trigger. So if I have a DN with a busy trigger of 6 for a switchboard person, the AC based hunt group will consider that line busy and hunt past it with only 1 call on the line.
Problem 2:The new model of LG/HL/HP DOES observes the busy trigger but does not offer the flexability of adding AC user and line # as a line group member.
Conclusion: Each model has features the other needs. This should be reconciled.
Thoughts?Same thing happened to me with a cataylst driver on my laptop. Hangs forever. I had just updated my system about a day before I applied this update, and the kernel upgrade definitely wasn't the culprit. I get a console login on my laptop, but whenever I startx it'll just hang forever and not respond to any input other than holding down the power button. Everything was working fine with the kernel, but then the last update, which included
*libxcb
*xcb-proto
*xcb-util
*mlocate
*libx11
*xorg-server
*xf86-input-evdev
*flac
*hal-info
Shared between my two systems (one of which is my desktop, with a nvidia graphics chip and the nvidia proprietary drivers).
I tried downgrading x-server and all the libs that were related to X, but that only broke dbus.
I'm afraid to reboot my desktop now...
Last edited by Subject-17 (2009-08-02 09:01:18) -
Does anyone have a checklist for supervisors or administrators to help them decide if a CUCM Hunt Group or UCCX is needed to service departmental call distribution?
-Users can login/logout of line groups with the HLog softkey.
-Calls can be sent off to a larger line group or hunt list (or voicemail) if Ring no answer or busy timers are exceeded.
?What about any reporting? Is there anyway to report Huntpilot or Line group member statistics, I have not found.
-In UCCX you can queue up calls and play MOH in queue, not available with Hunt Pilots.
Is anyone aware of any new advancements or outside the box ways to supplement ACD features (no, not the BACD.TCL script) for CUCM without UCCX?
thanks,
KGood luck with that. This is a Cisco forum so the recommendation is always going to be for UCCX or UCCE over hunt groups. Money makes the world go around. ;-)
That said, in UCCE/CVP deployments I have configured some very small teams as a hunt group with the hunt pilot accessible from an option in the menu. Mainly for non-agent areas (distribution centers, repair department etc) where they like all the phones in the hunt group to ring.
Regards,
Geoff -
Hi
I have a problem - I am part of a hunt group, which is desk based.
However I have just asked for flexible working, which would mean having a softphone and being logged into a hunt gropu when working from home.
IT dept are struggling with this. Please can you tell me if it is possible to log into the hunt group which is already set up from a laptop?
a speedy response would be appreciated. Thank you in advance.Hi,
Yes it is possible, if you have vpn connection to your enterprise network... where the hunt group server is reside, then you may login using softphone on your laptop from home. -
Hunt Group Issue - DN being skipped over
Hello,
I am trying to set up a Hunt Group which hunts, top down, to four different extensions (A,B,C,D).
This is working as expected apart from one particular extenstion...C. When start or middle of the Line Group this extension gets skipped over completely even though the user is logged into their phone and direct calls to that extension get through fine. When C gets put to the end of the Hunt Group the call gets terminated rather than the extension ringing with a "Line Busy" message.
I have checked the Directory Number and Extension Mobility Profile settings of extension C against those that do work (A,B,D) and I believe everything is set the same...I can see no obvious reasons why C will not ring. I have also checked with the user that no DND/call forwards are set up. I have also created an entirely new Directory Number and associated it with user C's EM-Profile...the same thing happens.
Am I potentially missing something here? For the life of me cannot see why this is happening.
Thanks,
-DavidDavid,
Two things come to mind..
1. Does the user have HLOG softkey? If so perhaps the user has accidentally logged out of the hunt group
2. Have you tried logout/login back to EM?
Please rate all useful posts
"opportunity is a haughty goddess who waste no time with those who are unprepared" -
Allowing CFA for a phone in a Hunt Group
I have CCM v5.13. Several users are members of a hunt group, and claim that they used to be able to call forward their phones and not receive any calls from the Hunt Pilot. I've made some changes to the Hunt Pilot, and ever since they say when they call forward their phones, it only works for calls made directly to their DID number , and that calls from the Hunt Pilot still ring on their phones.
I've researched this, and found Bug CSCec54565, which states that Cisco recognizes the issue, but has no plans to fix it. The recommended work around is to call the DID number directly, not through the Hunt Pilot. This doesn't work for my set up because these DID numbers are customer service lines which are published to the public.
I also found, in my research, solution # K00682545, which states that this Hunt Group is Working As Designed, and suggests the same work around, which is calling the DID directly.
My concern is the changes I made in the Hunt Pilot. I'm giving my users the benefit of the doubt when they say they used to be able to call forward all calls, whether they come from the Hunt Pilot or directly. I've set up a test Hunt Pilot, using our phones here in the shop, and I could duplicate their problem.
Can anyone think of a change I could have made in the Hunt Pilot settings that would bring this result, or are these users imaging that they could ever call forward all their incoming calls while belonging to a Hunt Group? Any ideas would be appreciated.Hi Bethany,
CUCM Hunt Groups/Line Groups have worked this way since at least CCM 4.1(3) :) I never like to doubt users (not a great idea for job preservation) but...I don't see their claim being a valid one.
You have to keep in mind that a call that has routed via the Hunt Pilot will always ignore the CFWD Settings on Hunt Group Member phones. The normal way to control this then is via the Hunt Group Logout of member phones combined with the Hunt Pilot level forward settings.
The following describes how the Call Forward settings on individual Hunt member phones are ignored when presented a call via the Hunt feature. Here is a clip;
Hunting and Call Forwarding
The concept of hunting differs from that of call forwarding. Hunting allows Cisco Unified Communications Manager to extend a call to one or more lists of numbers, where each such list can specify a hunting order that is chosen from a fixed set of algorithms. When a call extends to a hunt party from these lists and the party fails to answer or is busy, hunting resumes with the next hunt party. (The next hunt party varies depending on the current hunt algorithm.) ***Hunting thus ignores the Call Forward No Answer (CFNA), Call Forward Busy (CFB), or Call Forward All (CFA) settings for the attempted party (Line Group member Phones).
From this good doc;
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/6_0_1/ccmsys/a03rp.html#wp1078922
This is where the Hunt Group Logout comes into play. Sadly I don't think any CUCM 5.x versions support this feature, but the users can look forward to this in your next release (6.X or 7.x)
Log Out of Hunt Groups
The Log Out of Hunt Groups feature allows phone users to log their phones out from receiving calls that get routed to directory numbers that belong to line groups to which the phone lines are associated. Regardless of the phone status, the phone rings normally for incoming calls that are not calls to the line group(s) that are associated with the phone. The phone provides a visual status of the login state, so the user can determine by looking at the phone whether they are logged in to their line group(s).
The Log Out of Hunt Groups feature also comprises the following components:
â¢The HLog softkey allows a phone user to log a phone out of all line groups to which the phone directory numbers belong. Configure the HLog softkey in the Softkey Layout Configuration window. When the user presses the HLog softkey, the phone screen displays "Logged out of Hunt Group." When the user presses the HLog softkey again to log back in and receive hunt group calls, the "Logged out of Hunt Group" notification on the phone screen clears.
â¢The Hunt Group Logoff Notification service parameter in the Clusterwide Parameters (Device - Phone) section of the Service Parameters Configuration window for the Cisco CallManager service must be configured to enable this feature.
The Log Out of Hunt Groups feature, which is device-based, operates differently for non-shared lines and for shared lines.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/6_1_1/ccmsys/a08ipph.html#wp1032225
Hope this helps!
Rob -
8800 Series IP Phone - Hunt Group
We are considering migrating from 7900 series phone to the 8800. On our current devices when a user is not logged into a hunt group it is displayed on the screen. With the 8800 we noticed the only way to tell your current status is to press the hunt group button. Is there anyway to bring back the notification for when a user is not logged in?
Thanks!hi
IOS Version: c2800nm-ipvoicek9-mz.124-15.T4.bin
ephone-hunt 1 sequential
pilot 1111
list 2652, 2651, 2650, 2654
timeout 10, 10, 10, 10
statistics collect
telephony service
hunt-group logout HLog
& ephone template is
ephone-template 1
softkeys idle Redial Newcall Cfwdall HLog Pickup Dnd Gpickup Login
thank you. -
Can't configure hunt group voicemail unavailable or busy msg
I have set up hunt group voicemail button on one of the phones. I can login and set up the new password, but when I get to the stage of recording the unavailable voicemail. It hangs up straight away with call end on display with out giving time for the recording.
I have tried to dial the voicemail hunt extension it does the same thing.Hi Lap,
Is it the first time to record unavailable greeting for this huntgroup voice mail box? If not, can you hear the old unavailable greeting? Did you try with a different hunt group? You got the same issue? Do you have such issue with the individual voice mail box? Were you able to record the voice mail box name before unavailable greeting for this hunt group?
Best regards,
Wendy Yang -
Ephone logged out of hunt group
In CME I have a hunt group setup so that when someone calls in to the main line it rings ephone 10 if no answer it rings ephone 11. If no one answers these phones it will ring an on a cell-phone that the on call shift has. However, somehow the first phone (ephone 10) got logged out of the hung group and I can not get it to ring anymore. Is there a simple way to log the phone back into the hunt group that I am not seeing? Below is the out put of the show ephone command for that phone. Along with the hunt group configuration.
show ephone 001D.450B.A869
ephone-10 Mac:001D.450B.A869 TCP socket:[5] activeLine:0 REGISTERED in SCCP ver 6 and Server in ver 6
mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:7
IP:10.60.8.28 49415 7961 keepalive 13656 max_line 6 DnD HuntGroupLogout
button 1: dn 15 number 206 CH1 IDLE CH2 IDLE huntGroupLogout
button 2: dn 22 number 213 CH1 IDLE CH2 IDLE shared
Username: jharvey Password: 12345
Here is the out put of the show ephone-hunt command
show ephone-hunt
Group 2
type: longest-idle
pilot number: 502, peer-tag 20061
list of numbers:
206, aux-number A502A0100, # peers 1, logout 1, down 1
on-hook time stamp 1389019098, off-hook agents=0
peer-tag dn-tag rna login/logout up/down
[20060 15 0 logout down]
209, aux-number A502A0101, # peers 1, logout 0, down 0
on-hook time stamp 1441176762, off-hook agents=0
peer-tag dn-tag rna login/logout up/down
[20062 18 0 login up ]
only one agent available!
final number: 97433765
preference: 0
preference (sec): 7
timeout: 15, 15
hops: 1
E.164 register: yes
auto logout: no
stat collect: yesHi,
I guess you've configured the hunt group to work with overlays on the ephones?
Therefore you should probably have 1 or 2 ephone-dn's with the same number (for each of the hunt group members)?
So ephone 10 should be configured something like this:
ephone 10
mac 001D.450B.A869
1:10(whatever the ephone-dn is) 2o12,13,14 (the hunt list members)
i.e. 1:10 2o12,13,14,15
If any of the overlays or hunt group dn's are missing that might explain why it's not working
Hope this helps...
Please rate useful posts.. -
Hunt Group and Voice Mail - How?
Hello,
We are setting up a Hunt Group (Line Group, Hunt List, Hunt Pilot) for call distribution. We don?t want to use the Attendant console for this, we just want the calls distributed. We need to send some calls and broadcast them to different phones. We have it working but we have a need that if no one answers to send the call to voicemail.
The way we have it configured right now?
Line Group:
Broadcast Distribution
2 Lines ? Client Phone Lines
Hunt List:
Line Group Above
Hunt Pilot:
Number & Information Configured
Hunt List Above
What we planned on doing was to take and add a second line group with a single number that is forwarded to voicemail. Then in the hunt list, if no one answers the fist group, go to the second. The problem is, CTI Ports and CTI Route Points don?t seem to be able to be added to the Line Group.
Someone suggested that I add a ?fake? phone and forward the line to voicemail. I tried that and when I call that number it goes to voicemail but when I add it to the Line Group it rings fast busy when it rolls to it.
Any ideas?I did understand you do not want the attendant console, which is why I said similar but using AC.
The key thing in my earlier reply is that the last member of my hunt group is another CTI routepoint with another DN which is the actual directory number I use in Unity as an alternate extension, but it might be that this does not work for you.
For your case it might be something like:
On the xisting CTI routepoint configure the forward no answer to VM (this works today, correct?)
Then add another CTI route point to your hunt list and configure that CTI route point with forward all to VM.
Then setup Unity with the DN for the first CTI route point and add the DN of the second CTI route point as an alternate extension.
That way I believe it will go to VM directly when no huntgroup members are available, and go to VM if no answer.
Again, this works for me, with the only difference my line group contains AC users and is not broadcast, but the principle would be the same I guess.
But I might be misunderstanding what you are trying to achieve. If so, I am sorry for misunderstanding ;-)
Thanks,
Leo -
Voice mail as last stop for hunt group
Hello:
We have no ACD ability, so I have a hunt group set up with 3 extensions (one each as second line on each of 3 phones). If no one is available on any of the hunt extensions, I want it to go to a shared voice mail box.
Can anyone help me know if this is do-able and how (nothing I've tried has worked!). Using CM 6.1/Unity 5.0
Thank you,
LindaHi Linda,
This is most possible :) I'm going to add a touch to the great info from Tere (+5 points for this Tere)
In this example we are going to do what you are trying to do as well as Light the MWI Lamp on the phones within the Line Group when a Message is left for the group.
Lets say the Hunt Pilot number is 5000 and one of the second line DN's on the Line Group member phones is 2355. Set the Hunt Pilot to Forward (CFNA) to the Unity Pilot #.
If you don't use a Routing Rule as nicely suggested by Tere you can Create a mailbox for 2355 with 5000 as an Alternate Extension. When the call routes through to Unity via the Hunt Pilot No Answer Unity should see the CLID of 5000 which will then be connected to the Mailbox on 2355. This will take care of one of the Line Group Member phones but we want to light the Lamp on the second and third phone as well :)
Try setting the the DN's of the other two Line Group members as Alternate MWI's (in Unity) as well;
Setting Up Alternate MWIs for Extensions on the Same Phone System
Cisco Unity can activate alternate MWIs for extensions on the same phone system. Note that depending on the phones and phone systems, some additional phone system programming may be necessary. Refer to the installation guide for the phone system.
To enable alternate MWIs for extensions on the same phone system, do the following procedure for each subscriber who needs alternate MWIs.
To Set Up Alternate MWIs for Extensions on the Same Phone System
Step 1 In the Cisco Unity Administrator, go to the applicable Subscribers > Subscribers > Messages page.
Step 2 Confirm that the Use MWI for Message Notification check box is checked.
Step 3 Click the Add button located beneath the MWI Extensions table to add a row to the table. By default, the first row in the table contains an "X" to indicate the primary extension assigned to a subscriber. If you want one more extension and do not need to activate the MWI on the primary extension, you can also modify the first row.
Step 4 Enter the applicable extension in the Extension field of the table. MWIs are automatically enabled for all rows in the table. When entering characters in the MWI Extensions table, consider the following:
â¢Enter digits 0 through 9. Do not use spaces, dashes, or parentheses.
â¢Enter , (comma) to insert a one-second pause.
â¢Enter # and * to correspond to the # and * keys on the phone.
Step 5 Click the Save icon.
Step 6 Repeat Step 3 through Step 5 as necessary.
http://www.cisco.com/en/US/docs/voice_ip_comm/unity/401/integration/guide/c50acu4x.html#wp1808513
Then tweak the Message Lamp Setting in CCM for the second Line appearances;
For the second Line Setting on (each phone)-
Line Settings for this Device - Changes affect only this device
Message Waiting Lamp Policy - Light and Prompt
The RED Message Lamp will then work for these Second lines on each phone.
Hope this helps!
Rob -
CUCM 8.6 - Call Forward All Doesn't Work With DN In Hunt Group
Hello,
I'm trying to make a hunt group that's sole purpose is to dial out to our Help Desk member's cell phone (on-call after hours). The idea is that we want the hunt group to broadcast the call to the on-call engineers. Whoever picks up first takes the call.
At least that's the idea now. They may want to change that to - ring primary on-call cell phone, if no answer ring secondary on-call engineer.
The target cell phones will change every week and I wanted to give the supervisor a means of changing the numbers through the ccmuser page.
I created two DNs and placed them in a hunt group, each with call forward all to a cell phone number.
It seems that the hunt group ignores the call forward all setting and that is by design (https://supportforums.cisco.com/document/9126/cisco-callmanager-call-forward-all-cfa-does-not-work-if-line-hunt-group).
Does anyone else have any suggestions on how to accomplish this?That's correct, what you're seeing is WAD, this topic has been discussed plenty of times before, the only option you have is SNR
-
CCME Call Forward from one Hunt Group to another Hunt Group Failure
Hi I have a couple of hungroups in Cisco Call Manager Express. I am trying to configure a Call Forward no answer from one hunt group to another. Does anybody know if this is possible? If so, is there a config available? Here is my config, but it is not working.
Thanks,
Derek
voice hunt-group 20 parallel
final 2290
list 2201,2251,2252
timeout 30
pilot 2209Hi Derek,
This is supported with the restriction shown below;
final number
Router(config-voice-hunt-group)# final 8888
Defines the last extension in a voice hunt group.
If a final number in one hunt group is configured as a pilot number of another hunt group, the pilot number of the first hunt group cannot be configured as a final number in any other hunt group.
From;
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm/cmecover.html#72373
Cheers!
Rob -
CVP 7.0(2) SIP RNA Timer with CUCM Hunt Group
I have a very simple ICM 7.5(9) script which simply assigns a call type then forwards to a label on CUCM 7.1(5), which is a hunt pilot containing a hunt list with 2 line groups...a circular LG with 10 members (RNA reversion timeout of 20 sec), followed by a broadcast LG with different 10 members. There is no CFNA/CFB forwarding set up on the hunt pilot.
In CVP, the SIP RNA timer is set on for this DN at 120 seconds, and I can see that get set in CVP logs (IP addresses and dialed numbers modified to protect customer data):
41762417: 10.100.1.41: Dec 03 2012 20:23:28.977 -0500: %CVP_7_0_SIP-7-CALL: {Thrd=Pool:SIP[7059609]} Matched 666333315555551111 to proxy.customer.uc
41762418: 10.100.1.41: Dec 03 2012 20:23:28.977 -0500: %CVP_7_0_SIP-7-CALL: {Thrd=Pool:SIP[7059609]} Using Local Static Route for sip:[email protected]
41762419: 10.100.1.41: Dec 03 2012 20:23:28.977 -0500: %CVP_7_0_SIP-7-CALL: {Thrd=Pool:SIP[7059609]} Matched 666333315555551111 to TimeoutMatcher: patterns like 66633331> will use RONA of 120
41762420: 10.100.1.41: Dec 03 2012 20:23:28.977 -0500: %CVP_7_0_SIP-7-CALL: {Thrd=Pool:SIP[7059609]} CALLGUID = 0B19E39A3CE811E28B7DA21700DE4950 LEGID = 0B19E39A3CE811E28B7DA21700DE4950-135458420897716680 - [OUTBOUND]: INVITE TO <sip:[email protected];transport=udp> FROM "--CVP" <sip:[email protected]:5060> EXPIRES[120] 100REL[Unsupported]
The hunt group then begins hunting, and can be answered normally. However, a CANCEL is sent at 60 seconds, and I am not sure why:
From the gateway:
2106715: Dec 3 20:24:29.095: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
CANCEL sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.100.1.5:5060;branch=z9hG4bK2C171513C0
From: "--CVP" <sip:[email protected]>;tag=20687DD0-DAF
To: <sip:[email protected]>
Date: Tue, 04 Dec 2012 01:23:29 GMT
Call-ID:
[email protected]
CSeq: 101 CANCEL
Max-Forwards: 70
Timestamp: 1354584269
Reason: Q.850;cause=19
Content-Length: 0
From CUCM SDI traces:
12/03/2012 20:24:29.169 CCM|//SIP/SIPTcp/wait_SdlReadRsp: Incoming SIP TCP message from 10.100.3.30 on port 43568 index 566129 with 389 bytes:
CANCEL sip:[email protected]:5060;transport=tcp SIP/2.0
Via: SIP/2.0/TCP 10.100.3.30:5060;branch=z9hG4bK51cac6f4-76fb29a5-78d5dd99-9a021233-1
Call-ID: [email protected]
From: "--CVP" <sip:[email protected]:5060>;tag=ds229f1b0f
To: <sip:[email protected];transport=udp>
CSeq: 1 CANCEL
Content-Length: 0
I am trying to determine which timer is limiting the hunt to 60 seconds.
Can anyone suggest where I might begin looking?
Thanks so much!!!I've run into a similar problem recently with a CVP 8.5(1) SIP deployment and have found in the CVP documentation that the RNA Timeout is a range configurable between 5 and 60 seconds.
You can enter a larger value through OAMP on the Call Server-->SIP-->Advanced Configuration tab but when you Save and Deploy, it reverts back to the max of 60 seconds. The CVP help file indicates the 5-60 second range.
Regards,
Matt
Maybe you are looking for
-
How to configure Crystal Report from Test DB to Production DB
Hi, I have a VB/asp.net application that is currently using Oracle DB. Now, I'm creating a new Crytal report that will connect using any userID, password, database, servername on runtime. When I created the Crystal Report I used the Oracle OLE/DB con
-
Why am I having problems with my memory on my 3GS after downloading os10.5 upgrade?
Ever since we upgraded to the latest OS, the memory on my 3GS is low. Everything moves so slow when surfing the net or on social networking sites.
-
Need help ! While running DS job through designer we are getting below error: ODBC call <SQLDriverConnect> for data source <SErver name> failed: <[>. Notify Customer Support. Additional notes: 1. Source and Target datastore are getting connected prop
-
Tricky Sales doc pricing problem
I have a problem becasue a particular item category does not have the u201Cdetermine costu201D flag checked and therefore then when pricing is invoked the VPRS pricing condition is not re-determined, and its removed. Which 99% of the time is what th
-
Major question about movie clips
Ok so for this class project i have tried it all. I want to get a certain clip our of a certain movie but i cannot find a way to do this at all. What applications do i even need. I need so info about this asap please. Will imovie work or do i need an