Huperlinks in ibooksauthor glossary? Doesn't seem to be possible? Is therea work around?

Is there a work around? I need to include links to the outside world from the glossary.
help...
Johan

actually I found the solution :
http://www.igeneration.fr/itunes/astuce-votre-historique-d-achats-itunes-12056
it's in french, but the images and google translate will be enough
hope that helps for the others having the same kinda problem

Similar Messages

My iphone got stolen, and now i have a new one. I would like to know how to get back all my apps on my new iphone as it doesn't seem to be possible from itunes ... Thank you

Good evening !
Oh sorry I didn't get it was just a title ...
So, as i said, my iphone got stolen like a month ago, and i purchased a new one.
I downloaded other apps in this new iphone and i think i did an error by syncing it with itunes as it seems that it doesn't have all the other apps i downloaded on the other iphone.
So I would like to know how to get back all my apps ?
Thank you very much
PS : it is the same account that I use.

actually I found the solution :
http://www.igeneration.fr/itunes/astuce-votre-historique-d-achats-itunes-12056
it's in french, but the images and google translate will be enough
hope that helps for the others having the same kinda problem

Upgrading RAM doesn't seem to be possible

I have a 2-month-old Core 2 Duo which I purchased with 2GB, because this eejit didn't read the specs properly and didn't realise this was 2x1GB chips. Now my 2G5 has suffered terminal death, I am using the MBP as my main system and, as such, would like to maximise the RAM. However, I seem to be at an impasse. I cannot find a single 2GB module anywhere (I'm in the UK and I don't have a credit card so ordering from abroad isn't possible). If I'd ordered it with 1GB, then I could have upgraded it to 2, that wouldn't have been a problem, but I cannot upgrade to 3.
Incidentally, could someone with the technical knowledge about these things, please enlighten me as to why the slots are asymmetrical. Surely, if the RAM in these things has to be installed in matched pairs, then the maximum ought to be 1, 2 or 4, not 3.
I wish I'd saved up a little longer and ordered it with 3 from the outset! Gah!
Why does Apple do this to us? Either ship the damned thing with a single 2GB module, or allow it to be upgraded with a single 2GB module. Either that, or set the maximum at 4 and sell a 4GB (2x2GB) kit!
So does anyone know of anywhere retailing a single 2GB module, or am I stuck with 2GB?
btw, I wish there were UK-specific forums, as I know that the majority of posters here are (probably) North American.
Yours, frustrated,
Sarah
MacBook Pro 17" Core 2 Duo Mac OS X (10.4.8)
MacBook Pro 17" Core 2 Duo Mac OS X (10.4.8)

please enlighten me as to why the slots are asymmetrical.
It's because of the Intel chipset used in the MBP C2D used particular memory addresses that come into conflict if you have 4GB memory installed. Even though you can actaully install 4GB (2 x 2GB) RAM you will only ever get around 3.2GB of that. So, to stop the "where did all my expensive RAM go" questions, Apple just limits you to 3GB. Which I think is fair enough.
As for being assymetrical, the MBPs do not suffer from the same performnace issues as the MBs. Most because it the integrated graphics processor that requires the symmetrical RAM. In the MBP there is dedicated VRAM so this is of no importance.
Why does Apple do this to us?
They didn't… as you said yourself, you didn't quite read it right. While maybe Apple could have made it clearer all the information was all there in front of you.
Either ship the damned thing with a single 2GB module
This would be a good CTO option for them to offer although I think they don't simply due to the short supplies of the 2GB SODIMMs.
So does anyone know of anywhere retailing a single 2GB module, or am I stuck with 2GB?
While Enthanee recommended that you go with Apple, had she read it correctly should would have noticed that Apple only sells 2GB RAM for the MBP C2D as 2 x 1GB SODIMMs. It's what you already have. Apple currently does NOT sell 2GB SODIMMs as a standalone product.
So, What I would recommend is that you try calling Crucial UK…
http://www.crucial.com/uk/
… and see what they can do for a credit card-less person like yourself for the Part Nº CT613260 (2GB SODIMM for the MBP C2D). Same goes for Kingston…
http://www.kingston.com/ukroot/
… although with these guys you'll probably have to call them to find a reseller near you that can order it for you. The part number you need here is KTA-MB667/2G.

Mini dvi to s-video/composite adapter doesn't seem to work?

basically i'm trying to hook my rather new 2.53 ghz mac mini to my tv, which basically has rca inputs. so, having seen several laptops hooked to this tv as simply as using an s-video to composite adapter, i figured it would be as simple as getting the mini dvi to composite adapter and i'd be good. well, for some reason this doesn't seem to do anything. the other weird thing is that when i hook the cable from the composite adapter to the tv, i get a buzz out of the speakers as the connection is being made. why is a video signal having anything to do with the audio? plugging my playstation 2 into the same input works fine. why the difference?

Boece wrote:
!http://images2.monoprice.com/productmediumimages/47241.jpg!
+
!http://images2.monoprice.com/productmediumimages/48501.jpg!
That's the setup I've used. Works great for video and photos, but webpage text can be difficult to read.
I used the yellow composite input rather than the s-video. My old tv is inside an “entertainment center” type tv stand and is so friggin heavy, it’s a pain in the axx to move, so I just used the composite plug on the front of my tv. Since the Mac mini is sitting in front of the tv it works great:-)
http://discussions.apple.com/thread.jspa?threadID=2430645&tstart=0
Message was edited by: James Press1

Need lightroom 4.4 asmac is 10.6.8 and not compatible with anything higher. Does this come with the creative cloud? Would really like a disc but that doesn't seem to happen anymore. Currently have cs4 and d7100 hence need 4.4 to open raw Any idea

need lightroom 4.4 asmac is 10.6.8 and not compatible with anything higher. Does this come with the creative cloud? Would really like a disc but that doesn't seem to happen anymore. Currently have cs4 and d7100 hence need 4.4 to open raw Any ideas? Is this now customer service or does adobe have a customer service team . Site not user friendly. Thanks

Graham Giles wrote:
Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
• I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
I know that using a cloned drive would work well in this instance.
I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive?

Wacom Tablet doesn't seem to work all of the time?

I have a Wacom Intuos 3 tablet, not more than a year old. I recently installed it onto my Macbook Pro and it worked fine, but when I unplugged it and came back to work with it later, it doesn't seem to work. The mouse doesn't respond to where I click on the pad.
So, I've reinstalled this a couple of times and was able to make it work perfectly, but today when I went back to work in photoshop, it doesn't seem to be responding again.
Does anyone have any tips? I know that Leopard likes you to eject USB devices instead of just pulling them out of the slot, but I don't see anywhere to eject it.
Does anyone know what's up?

Downloaded a driver from website, tablet works now.

HT3235 I just bought a Micro-DVI to video adapter to try and hook my MacBook Pro 13" I bought mid 2009 to my old TV, the adapter doesn't seem to fit any of the connections, is this the right adapter?

I just bought a Micro-DVI to video adapter to try and hook my MacBook Pro 13" that I bought in mid 2009 to my old TV (svideo), the adapter doesn't seem to fit any of the connections on my macBook pro, is right adapter?

Shootist007 wrote:
Apple doesn't offer a MDP to AV or componet connect . Only DVI and VGA. They also don't offer one to HDMI. You have to go aftermarket to get one to HDMI.
Quite right, but as the OP does not have component or composite connections not important.
To the OP, this does work, but is not the cheapest, and as it appears that Apple no longer sell an SVideo adaptor cable 3rd party it will have to be.

1.burned a hole in my screen can I get this repaired? 2. Even though I have it set to open up to a blank screen, no web pages, my computer (safari) continuously opens with multiple safari sites open. It doesn't seem to matter what I do, it just reverts

1. I burned a small hole in my screen, is that fixable/replaceable? 2. Even though I have my 15" MacBook Pro set to open to empty screen when I open Safari, it constantly opens multiple previous pages. It doesn't seem to matter what I do it just reverts back to opening multiple pages. Major security risk, my bank pages have popped back up after my computer has been shut down, account numbers and all. I took my computer to an Apple store and the genious there tols me... "honey, you can't hold your laptop on your lap, that's the problem, it's getting too hot" he honestly said that. Could someone please help me? Thanks

Apple doesn't call its portable machines 'notebooks' instead of 'laptops' for nothing - using a MacBook Pro in your lap can cause some burns on your skin, poor ventilation, etc. So use it on a hard flat surface - not your lap, pillows, bedclothes, etc.
As for burning a hole in your screen, you'll have to revisit the Apple Store and see how much they would charge for a new screen. It's likely to be a bit expensive.
And if you've Safari set to re-open tabs when you restart, you can disable this feature -> Safari-Preferences-General.
Good luck,
Clinton

How does Azure Compute Emulator (or the Azure one) determine if a role is web project or something else ("The Web Role in question doesn't seem to be a web application type project")?

I'm not sure if this is F# specific or something else, but what could cause the following error message when trying to debug locally an Azure cloud service:
The Web Role in question doesn't seem to be a web application type project.
I added an empty F# web api Project to a solution (which adds Global.asax etc., I added an OWIN startup class Startup etc.) and then from an existing
cloud service project I picked Roles and
chose Add
-> Web Role Project in solution, which finds the F# web project (its project type guids are 349C5851-65DF-11DA-9384-00065B846F21 and F2A71F9B-5D33-465A-A702-920D77279786),
of which the first one seem to be exactly the GUID that defines a web application type.
However, when I try to start the cloud project locally, I get the aforementioned error message. I have a C# Web Role project that will start when I remove the F# project. I also have F# worker
role projects that start with the C# web role project if I remove this F# web role project. If I set the F# web project as a startup project,
it starts and runs as one would expect, normally.
Now, it makes me wonder if this is something with F# or could this error message appears in C# too, but I didn't find anything on Google. What kind of checks are there when starting the emulator and which one needs
failing to prompt the aforementioned message? Can anyone shed light into this?
Sudet ulvovat -- karavaani kulkee

Sudet,
Yeah you are right, the GUID mentioned seems to be correct and the first one i.e. {349C5851-65DF-11DA-9384-00065B846F21} means the web application project which compute emulator uses to determine while spawning up role instances.
You might want to compare the csproj of your C# and F# web projects which might give some pointers.
Are you able to run your F# web project locally in IIS? If yes then you will definitely be able to run it on azure so I will recommend to test it in IIS Express first.
Here are some other tips which you can refer or see If you are yet to do those settings
1. Turn on the IIS Express - You can do it by navigating to project properties
2. Install Dependent ASP.NET NuGets / Web Api dependencies (If there are any missing), Reference System.Web assembly
Also I will suggest to refer this nice article about how to create a F# web Api project
http://blog.ploeh.dk/2013/08/23/how-to-create-a-pure-f-aspnet-web-api-project/
Hope this helps you.
Bhushan | http://www.passionatetechie.blogspot.com | http://twitter.com/BhushanGawale

My apple tv is registering on my tv - i can see it on my system info screen but the apple tv doesn't show up, as well my imac doesn't seem to let me share - so i don't know whats wrong, why my apple tv isn't working

anybody able to help me with my setup for apple tv. i've followed the directions in the guide and my tv doesn't seem to register in part. it's weird because my tv system info identifies the apple tv but the screen never went black and it doesn't show anything, too, my imac doesn't seem to register the apple tv unit either

I would try connecting it to another tv to see if it works there if it does
then likely your tv can't handle the default resolution and you should lower it on the other tv
if not then you should connect it by usb to the computer and use itunes to restore it's firmware

Safari on my iPhone 6 running 8.02 doesn't seem to work right. Some Java scripts don't show correctly and they do on other browsers I have downloaded. I tried almost everything and nothing seems to work to fix it. Please help.

Some websites like the one of my college uses JavaScripts and they seem to load correctly to a certain point but then not really. For example in one it would say select an option from the left menu. And I do it hut nothing happens. But when I go to the same website in another browser on my phone. The JavaScript works completely and allows me to see whatever I was clickig on that menu. I have seen that there are other websites being affected too. I tried clearing my cookies and data. even restarted my phone. And doesn't seem to work. I don't know how change the configuration any more to make it work like normal. At first I thought it was my school's website but it never got fixed. And now I realized is my safari browser! I wanna keep using it since I am really familiar with It. If someone knows how to fix this please let me know!
Thanks

You can reset the SMC and see if that helps. If it's a unibody or Retina, follow the method for "a battery you should not remove yourself."
http://support.apple.com/kb/ht3964

I'm using iphoto9.1.3 but now it doesn't seem to work, whenever I try to open it, it just shows loading, but never loads. Can anybody help me with this ?

I'm using iphoto9.1.3 but now it doesn't seem to work, whenever I try to open it, it just shows loading, but never loads. Can anybody help me with this ?

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

TS3991 iWork doesn't seem to recognize that I already have the pages, keynote, and numbers apps so I can't use iCloud to sync my documents. How to get my apps recognized?

iWork doesn't seem to recognize that I already have the pages, keynote, and numbers apps so I can't use iCloud to sync my documents. How to get my apps recognized?

Do you have both the OS X and iOS versions of each of them?

The image came up on my screen saying that I need to connect my iPod to iTunes, but I have a passcode, so it won't allow me to. And I want to try and turn it off, but my touch screen doesn't seem to be working either. HELP!

The image came up on my screen saying that I need to connect my iPod to iTunes, but I have a passcode, so it won't allow me to. And I want to try and turn it off, but my touch screen doesn't seem to be working either, so I can't even turn it off since you need to "slide to power off." HELP! I'm leaving on Thursday morning for six and a half weeks, and I absolutely need my iPod with me. I was just at the Apple store today for problems I was having with ANOTHER product, and I don't really want to drive all the way out to where my nearest store is (which is not very near) if I can figure this out at home. My iPod was working totally fine earlier today and last night, so I don't know what happened! Please, please, PLEASE HELP!

Now it's allowing me to reboot (hold down power button and home button and restart), but every time it just comes up to the same thing: the connect to iTunes page. Which is not possible. And I refuse to restore my iPod. PLEASE HELP.

IPhoto suddenly doesn't seem to recognize my camera, and essentially freezes. The only thing that makes sense is that another person in my house imported using a different camera and that changed things somehow. Ideas?

iPhoto suddenly doesn't seem to recognize my camera, and essentially freezes. The only thing that makes sense is that another person in my house imported using a different camera and that changed things somehow. Ideas?

Hi There!
The camera is a Panasonic Lumix. I don't have a USB card reader. I did try and different port although not a different cable.
I did remember one additional thing. I plugged my camera in at work to a PC. It was after that, when I came home, that the iPhoto wasn't working when I connected my camera to our iMac/iPhoto at home. I think this may have caused the problem.
Cheers!

Huperlinks in ibooksauthor glossary? Doesn't seem to be possible? Is therea work around?

Similar Messages

Maybe you are looking for