HVDVD_TS folder

What steps should I take when given the following warning while trying to burn a DVD?
The Build Location folder contains a HVDVD_TS folder(HD DVD content). You must remove the HVDVD_TS folder from the Build Location in order to proceed with Build/Format of a Standard DVD project.

It sounds like you previously tried to build a High Definition project which created that HVDVD_TS folder.
Using the Finder, navigate to where you are trying to save the current build and remove that folder, or build to a new location.

Similar Messages

VIDEO_TS or HVDVD_TS folder files not included in final disc

I'm trying to burn an HD DVD project and after the compile completes successfully I get a string of error messages in the Log telling me that the .BUP, .IFO, .EVO, .LAY files found in VIDEO_TS or HVDVD_TS folder will not be included in the final disc. When I try to play the finished disc in a regular set-top DVD player it doesn't play. (It will play in an Apple Computer)
I can't figure out how to fix this.

I don't know why you are getting those errors. Maybe someone else will come along and help with that.
You are still using a media that has a very small range of options to play. I would start a new SD DVDSP project and take things from there.

Get Front Row to play from HVDVD_TS folder

How can I get Front Row to play content from a HVDVD_TS folder. It works great with standard VIDEO_TS folders (under Leopard/Snow Leopard) but it doesn't seem to recognise my DVD Studio Pro generated HVDVD_TS folder.
Thx!
Cojcolds

I have the same problem with remote control device (infrared) and FrontRow as many other users, see links below.
And yes, I have tried all the described "remedies", but the problem is still there.
The problem is that after boot, FrontRow reacts to the remote ok (about 10-15 minutes), but then
FrontRow stops responding to remote control commands. However, FrontRow can be controlled by keyboard
commands all the time. If iMac is now booted, the problem is still there. The only way I have had FrontRow
and remote work ok (for 10-15 mins) is shutting down iMac, waiting an hour or so, and then booting it. I'm just
wondering is this hardware problem (related to e.g. temperature ?), problem with FrontRow itself, or problem with
related daemons. Anyway, I hope that this is sw problem, and Apple could fix quite soon in next FrontRow or Mac OS X
update. Otherwise, I'm 100% sure to replace my iMac because of this stupid little bug (that seemed to be the only
working remedy).
- Kari
http://discussions.apple.com/thread.jspa?messageID=1264312&#1264312
http://discussions.apple.com/thread.jspa?threadID=287078&tstart=15
http://discussions.apple.com/thread.jspa?messageID=1438431&#1438431
http://discussions.apple.com/thread.jspa?threadID=309333&tstart=15
http://discussions.apple.com/thread.jspa?messageID=1439228&#1439228
http://discussions.apple.com/thread.jspa?messageID=1003149&#1003149
http://discussions.apple.com/thread.jspa?messageID=1004692&#1004692
http://discussions.apple.com/thread.jspa?messageID=1317018&#1317018
IMAC G5/2.1GHz, 20" iSight Mac OS X (10.4.3) 512MB, 250GB

DVDSP creates HVDVD_TS folder - disk won't play

When I attempt to create a DVD I get one that will play on my Mac but not in a standard DVD player - I've tried several. DVDSP creates a disk with one folder - HVDVD_TS containing .BUP and .EVO and .IFI files.
A start with Final Cut Pro with files either created in Compressor or QuickTime. I have tried h.264, Apple ProRes 422, or straight to MPEG2.
Any ideas?
Thanks

You created a HD DVD disc, which only plays in some (now defunct) HD DVD players. To create a disc that will play in standard DVD players, you must create a SD DVD.
In your Outline, click on your disc then look at the Inspector. Under the General tab change your setting from HD DVD to SD DVD.

TS2610 'VOB_DATA.LAY' Warning: The file 'VOB_DATA.LAY' found in the VIDEO_TS or HVDVD_TS folder will not be included in the final disc. Warning: The file 'YOU_GOT_TO_BE_KIDING_.layout' found in the VIDEO_TS or HVDVD_TS folder will not be included in the f

I have been fighting this file witch came up out of no where for the first time ,if i could understand whats going on maybe i can burn a dvd Help !

Looks like you are making an HD DVD...a format that lost the high def disc wars. Only Macs with Superdrives and discontinued JVC HD DVD decks can play this format.
You need to make an SD DVD...I'll post the steps for that in a bit. If you want a high definition disc, you'll need a BluRay burner, and software like TOAST to burn it.
#42 - Quick and dirty way to author a DVD
Shane's Stock Answer #42 - David Roth Weiss' Secret Quick and Dirty Way to Author a DVD:
The absolute simplest way to make a DVD using FCP and DVDSP is as follows:
1. Export a QT movie, either a reference file or self contained using current settings.
2. Open DVDSP, select the "graphical" tab and you will see two little monitors, one blue, one green.
3. Select the left blue one and hit delete.
4. Now, select the green one, right click on it and select the top option "first play".
5. Now drag your QT from the browser and drop it on top of the green monitor.
6. Now, for a DVD from an HD source, look to the right side and select the "general tab" in the track editor, and see the Display Mode, and select "16:9 pan-scan."
7. Hit the little black and yellow burn icon at the top of the page and put a a DVD in when prompted. DVDSP will encode and burn your new DVD.
THATS ALL!!!
NOW...if you want a GOOD LOOKING DVD, instead of taking your REF movie into DVD SP, instead take it into Compressor and choose the BEST QUALITY ENCODE (2 pass VBR) that matches your show timing. Then take THAT result into DVD SP and follow the rest of the steps. Except you can choose "16:9 LETTERBOX" instead of PAN & SCAN if you want to see the entire image.

HVDVD_TS found in build location? What? I don't understand. Can't burn DVD!

This is the warning I get when I press the burn button:"The Build Location folder contains a HVDVD_TS folder(HD DVD content). You must remove the HVDVD_TS folder from the Build Location in order to proceed with Build/Format of a Standard DVD project."
I don't know what's it's telling me. I don't know where this folder is. I used spotlight, and nothing.
I'm trying to burn a regular DVD, and I can't do it. The movie itself is only 30 seconds and according to DVD SP only 46.1 MB is being used up for this project.
Anyway. Please help if you can

With earlier version of DVDSP 4, it would allow you to create a mixed disc--containing HD-DVD and SD DVD folders. The latest specs for HD-DVD doesn't support that mixing, so the latest version of DVDSP won't allow you to create such a folder (with both HD and SD folders inside). It's asking you to remove the HD-DVD video_ts folder first, before you build your SD folder.
Jim

DVD Studio Pro HVDVD_TS

DVD Studio Pro 4.2.1 insists on creating an HVDVD_TS folder when burning a DVD. I have checked everything at least 10 times and all is SD, in fact I have never burned an HD DVD. I am trying to get this DVD out to a client and must get this resolved. I have followed all of suggestions on the discussion board that I have the patience to read, including deleting the HVDVD_TS folder (5 times now) and the burn keeps recreating the HVDVD folder. I have been making DVDs for years and now suddenly I get this issue. Anyone know whats up? I am at a total loss for a solution.
Thanks.

Started over from scratch, after deleting the HVDVD folder. Now DVD Studio Pro appears to be creating a VTS folder instead of a HVDVD folder. What happened in the last 2 months to cause this? Was there a buggy DVDSP upgrade or something?

Can't Burn my HVDVD_TS

I need to burn the dvd or i will lose money what i am i doing wrong? I have this folder HVDVD_TS but DVD pro isn't burning it. How can i make it work to burn. Here are the files with in the folder:
HV000I01.BUP
HV000I01.IFO
HV000M02.EVO
HV001I01.BUP
HV001I01.IFO
HV001M01.EVO
HV001T01.EVO
HV002I01.BUP
HV002I01.IFO
HV002M01.EVO
HV002T01.EVO
HV003I01.BUP
HV003I01.IFO
HV003M01.EVO
HV003T01.EVO
HV003T02.EVO
HV004I01.BUP
HV004I01.IFO
HV004M01.EVO
HV004T01.EVO
HV005I01.BUP
HV005I01.IFO
HV005M01.EVO
HV005T01.EVO
HV005T02.EVO
Render Data
UNTITLED_DISC.layout
VOB_DATA.LAY
i don't know if that helps but please please help me
thank you!

I have had the same problem.
All I have left of an old video project of mine, was the HVDVD_TS folder and so I desperately needed to find a way to make i viewable. There was no help to find on the internet, it seems DVD Studio Pro is shamefully neglegting all the people they have left off with unusable HD dvd formats of their work.
I found one way to get the material onto a regular dvd using Roxio Toast (I have version 8) I simply clicked the video_dvd option on the left hand menu and drag & dropped the HVDVD_TS folder into the window. When I clicked the "burn" button it first transcoded and then burned the dvd and it works fine on a regular dvd player.
Hope it can help you

Disc Image will not mount after format

I am trying to create a disc image from DVD Pro so that I can burn the final project at a low speed to avoid burn errors. Whenever I try to burn the image to DVD in Disc Utility it says that the file is not recognized. I have even tried to start the project from scratch and still am getting the same error message. Another weird thing that DVDSP is doing that is odd is when I am build and format, the log shows a ton of error messages saying that random files will not be included on the final DVD. Please help, I cannot figure oout what I am doing wrong.
Thanks,
Leon

Leon:
Warning: The file ‘2007KIAC_BBTOURNY.layout’ found in the VIDEO_TS or HVDVD_TS folder will not be included in the final disc.
Warning: The file ‘VOB_DATA.LAY’ found in the VIDEO_TS or HVDVD_TS folder will not be included in the final disc.
These are standard wraning. Nothing to take care about.
After deleting the old build empty your trash and try again. If DVDSP ask to reuse, you must be building to another location than where you think. Check that.
Hope that helps !
Alberto

I am trying to burn a basic DVD in DVDSp 4.0,

Here is the message I am getting...The Build Location folder contains a HVDVD_TS folder(HD DVD content). You must remove the HVDVD_TS folder from the Build Location in order to proceed with Build/Format of a Standard DVD project.
Not sure how or why. If anyone has had this issue, please tell me how to resolve it.
Thanks.
The video piece is about 1hr and 30 minutes...cut into 2 segments. SOmehow, it seems that one of the segments is SD and the other is HD. I crearted the video in FCP 6.06
Thanks.
MArk

I actually had to go into my preferences...discard the HVDVD_TS folder and it worked fine.
Thanks for your offers.
Mark

How to convert HD DVD to SD in PAL and NTSC - is the MXO2 the magic bullet?

I edited a 1 hour-long video of my college class reunion in FCP Studio 2, exported via Compressor and finally made it into a DVD with menus via DVDSP. Very neat so far, but there's a problem - the DVD is in HD, but I need to convert it to SD PAL to distribute to my old pals in the UK and SD NTSC for those who made it to the USA.
I'd like to do that without re-doing all the fancy menu-work in DVDSP, but how? Can anyone advise me, will the new Matrox MXO2 convert an input HD PAL signal to an SD PAL / or SD NTSC output which can be re-acquired into DVDSP and burned to disk?
Advice would be much appreciated, thanks.

Jerry, I appreciate your help with this. I exported the film from FCPS2 via Compressor as a PAL SD .mov, located the correct HD video asset in the DVDSP Build folder and replaced it with the new SD version, renamed to look like the HD asset.
On re-opening the project, DVDSP registers the fact that the video asset has changed (mainly affects menu items), but despite ensuring Preferences is set for SD, there seems no way of changing the format of its output from HD to SD.
Trying to hide the HD video asset in a sub-folder doesn't work - DVDSP re-names the new SD video as Filename (Video) 1.
Build command creates an HVDVD_TS folder containing the usual HD-type files. Creating a template in the hope of using the menu structure in a new SD project results in all the HD video assets coming with it.
I'm sure I'm being stupid, as usual, but can you point me in a better direction?
Thanks
Dr8x

Error message - won't let me burn any dvd's

Hello
Tried a couple of times to burn this DVD project using DVD SP 4.1 and the first DVD went well, tried a second one got this error message...tried a different dvd got the same message:
Formatting failed
The recording device reported the media error: Power calibration area error. (0x73, 0x03.)
Never saw this before - fix?
Thanks
KB

Also get this in the build log - don't know if this is a problem or not...
Warning: The directory ‘/Volumes/All Media/DVDSP4_projects/Wedding 2004’ will not be included in the final disc.
Warning: The directory ‘/Volumes/All Media/DVDSP4projects/JACKETP/PAR’ will not be included in the final disc.
Warning: The file ‘VOB_DATA.LAY’ found in the VIDEO_TS or HVDVD_TS folder will not be included in the final disc.
Warning: The file ‘WEDDING_04.layout’ found in the VIDEO_TS or HVDVD_TS folder will not be included in the final disc.
Thanks
KB

How do I create Blu Ray Disc with DVD Studio Pro ?

Folks, I think that I'm in trouble... I created 3 HD projects with DSP (i do not have the tapes and fcp project anymore, neither the HDV 1080i mov file) and I need to be burned it with a Blu-Ray Media, and play it with a BR Player... So far I made the following steps:
1-) In FCP, I exported some Quicktime Movies with HDV 1080i60 codec (movie with chapters, menu bg movie, extras).
2-) In Compressor, I used the preset HD MPEG-2 19,0 MBPS for videos, and Dolby digital professional 2.0 for audios.
3-) In DSP I created a HD DVD Project (DISC window, GENERAL tab, DVD STANDARD = HD DVD; DISC WINDOW, DISC/VOLUME tab, DISC MEDIA = BLUE LASER, LAYER OPTION = OTP) with movies, extras, menus...
4-) In ADVANCE BURN (under FILE MENU) I chose BUILD.
5-) Now I got a HVDVD_TS folder, with my movie compilation...
NOW, my doubt is... The folder HVDVD_TS can be burned on a BR Media and be played on a BR Player ?
If not, what can I do with my HVDVD_TS folders to be compatible with Blu Ray ?
thanks a lot for any help.
Best Regards
Marcelo

That can't be done. Get the tapes back and start over. Get the new Toast in the tutorial I posted to make a Blu ray disc.
You could try this tool to demux the streams, transcode to QT then re-encode for Blu Ray but I wouldn't go that direction unless you know what your doing. You would also be encoding twice which is not good.
Get the original source back and go the toast route from the start.
Message was edited by: Eric Pautsch1

DVD studio pro will not burn menus PLEASE HELP!!!!!!!!!!!!!!

PLEASE HELP!!!
I have created a project, a DVD with menus and subtitles in 2 languages, yet when I burn the DVD (both using build/format option and build format options separately)the resulting DVD has no main menu, actually it has no menus at all! it goes straight into the DVD film where I can change subtitles language only from the remote buttons. The project compiles successfully but once formatting it gives me two hilghlighted errors in the log (which I gather are the layouts/menus)HERE IS THE LOG (highlighted part is error message):
Building Project Treesitting DVD with sub+menu
17/12/2007 14:12:01
Build Folder /Users/adelitahusni-bey/Library/Caches/DVD Studio Pro Files/HVDVDTS/HVDVDTS/nomad/treesit dvd
Starting DVD Build TREESITTINGDVD_WITHSUB...
Compiler Initializing...
Precompiling Project TREESITTINGDVD_WITHSUB
Compiling VMG Information...
Created 15 PGCs in VTSM1
Created 8 PGCs in VMG.
2 Menu(s) will be created...
Compiling Menu PGCs...
Compiling Menu#1 (Menu 1)...
Skipped Rendering Menu:Menu 1,Language:1.
Compiling Menu#2 (Menu 2)...
Skipped Rendering Menu:Menu 2,Language:1.
Writing HV000M02.EVO
1 VTSs and 1 Titles will be created...
Compiling VTS#1 (Track 1)...
Preparing Subtitles...
Muxing HV001T01.EVO
Done.
Linking VMG...
Linking VTS#1...
Writing VTS#1...
Writing VMG...
Writing Layout Info...
Compile Completed Successfully
+*Warning: The file ‘TREESITTINGDVD_WITHSUB.layout’ found in the VIDEO_TS or HVDVD_TS folder will not be included in the final disc.*+
+*Warning: The file ‘VOB_DATA.LAY’ found in the VIDEO_TS or HVDVD_TS folder will not be included in the final disc.*+
Start formatting
Formatting as Standard DVD
Simulation mode is off
Lossless linking is on
Number of layers is 1
Doing side 1 of 1
Playable in region 1,2,3,4,5,6,8
Disc size is 12 cm
Disc has no copyright material
Writing UDF 2.50 structures
Writing files
Writing final UDF information
Formatting finished.
Formatting finished.
DOES ANYONE PLEASE KNOW THE REASON FOR THIS???? AND HOW TO SOLVE IT???? PLEASE PLEASE PLEASE...HAVE TO SEND THIS PROJECT OFF SOON.
I have burned another project with menus succesfully..

Hi
FIRST check that your Play Movie button in your menu has NOT an Auto Action selected that make it plays automatically your movie when the Menu loads. You'll find that setting in the Advanced tab of Inspector. If not . . .
You can try a workaround, no matter that if you have your Menu as First Play it must work. Try yhis:
- Create a simple black JPG file i.e. in Photoshop
- Create a Slideshow
- Add a the JPG to the slideshow, set duration 2 secs
- Set the Slideshow as First Play
- Set Slideshow End Jump to your Main Menu
Build and burn again.
Alberto

DVD STUDIO PRO burning problem damned!

hi everyone.
Here are the steps:
-i edited a film on final cut, exported it in quicktime proress 422 25p 48khz.
created a dvd on dvd studio pro.
it doesnt work and here is the log:
Starting DVD Build UNTITLED_DISC...
Compiler Initializing...
Precompiling Project UNTITLED_DISC
Compiling VMG Information...
Created 7 PGCs in VTSM1
Created 8 PGCs in VMG.
1 Menu(s) will be created...
Compiling Menu PGCs...
Compiling Menu#1 (Menu 1)...
Writing VIDEO_TS.VOB
1 VTSs and 1 Titles will be created...
Compiling VTS#1 (Barquettes v3)...
Muxing VTS011.VOB
Done.
Linking VMG...
Linking VTS#1...
Writing VTS#1...
Writing VMG...
Writing Layout Info...
Compile Completed Successfully
Warning: The file ‘UNTITLED_DISC.layout’ found in the VIDEO_TS or HVDVD_TS folder will not be included in the final disc.
Warning: The file ‘VOB_DATA.LAY’ found in the VIDEO_TS or HVDVD_TS folder will not be included in the final disc.
Start formatting
Formatting as Standard DVD
Simulation mode is off
Lossless linking is on
Number of layers is 1
Doing side 1 of 1
Playable in region 1,2,3,4,5,6,8
Disc size is 12 cm
Disc has no copyright material
Writing ISO 9660 directories
Writing UDF 1.02 structures
Writing files
The recording device reported the media error: Unknown device error. (0x73, 0x03.)
The recording device reported the media error: Unknown device error. (0x73, 0x03.)
I'am stuck, can anyonw help!
thanks a lot!

I've run into this before too.
What ended up happening to me, after literally many months of stress and frustration, for it was a huge project I had worked on for a long time. I simply had to just make a new project. Something within my project settings or files had become corrupt. My first suggestion would be to just start again and see what happened. But if you don't want to, try making sure you don't have any hidden unused tracks or buttons. This will upset and make DVDSP pissy at times. If that isn't it, maybe it is your actual final cut exported file. Ask yourself, did you run it through compressor or not (this is not a necessity, but could potentially help), if not then try burning a dvd with another project all together and see what happens. It might help you narrow down your problems, sort of like a check list. If the other project burns, then it is either your DVDSP project (which is my guess), or it is your final cut file, which means you just export again and try again.
Hope that helps!

HVDVD_TS folder

Similar Messages

Maybe you are looking for