Hvr-1600 unable to get clear picture

Thank You in advance for reading my post!
I have been for over a year now, on and off trying to get my hvr-1600 to work under Linux. In the past i have tried MythTV, YaVDR, tvheadend, VDR, all installed on different versions and distributions of Linux. Some i get no video at all some i get fuz i have read almost every webpage that has cx18 or hvr-1600 on it but can not figure it out. Recently i have made the attempt again. Here is were i am now:
- Fresh install of Arch with base and base-devel and only a couple additional packages.
- tvheadend-git v3.5_225 from Arch AUR
- v4l-utils 0.9.5-2
- ivtv-utils 1.4.1-5
I would like to build a headless recording box. I currently just have a DVD player connected to the svideo port on the hvr-1600 playing the menu of 24 tv show. Through many tutorials i have been able to force the card to use the svideo port via the command "v4l2-ctl --set-input=1 --set-standard=1" which has got me to see the attached screen capture. I have used ivtv-tune to swich frequency's manually with no change to the picture. I use the command lines only because i can't figure out how to set these within the tvheadend website. I see no option to pick the input nor do i understand how the minimum frequency is 10000 but when i set it using ivtv-tune it shows 625.200 or something like that. Anyway i have attached some additional command exports so you can see logs and initialization logs that might give you more insight into what might be going on.
Any help is appreciated my only option for this card to work right now is Windows 7 and it works perfectly and that just makes me sick... LOL
https://tvheadend.org/boards/4/topics/8996
This link is to where i posted the same question to the tvheadend.org forum and it has some attachments that provide more info.  Not sure how i can attach them here.

I had a response from someone on the TVHEADEND.ORG site and wanted to update this post:
***FROM OTHER SITE****
I have no idea how to use this card but -
What are you planning on using it to record, analogue TV, svideo, digital TV or all?
While you are testing with s-video trying to tune doesn't make sense.
Your log shows -
[ 1633.356655] cx18-0 843: Detected format: NTSC-M
[ 1633.356658] cx18-0 843: Specified standard: PAL-BDGHI
so maybe try a different --set-standard= for the s-video test.
*** My Response ***
Thanks for the response.
All i want is something that i thought would be very easy. I have a Bell Satellite TV and i just want to record through the svideo connection off of the satellite receiver. Just analogue svideo don't need to pause or stop or epg just raw signal recording.
The tuning using the svideo was something i was trying to see if it would make a difference it came to me because what is being displayed reminds me of when my dial TV (ya i remember using a dial) was just a bit off. Also from when i would connect my VCR (YA YA) and it had the CH3-CH4 switch on the back and had to make sure the TV was on the correct channel or it would not work.
I tested all of the different standards with no success. Thank you for the idea i never thought of testing all of them i just automatically switched it to NTSC.
Thanks Again and i welcome any suggestions!!

Similar Messages

  • My hard drive crashed on my macbook pro and I had a new one installed and they were unable to get my pictures off of it. Is there anyone who could help? I'm going to lose all my memories of my kids! I got my old hard drive

    My hard drive crashed on my macbook pro so i had a new one installed and they couldn't get my pictures off. I dont want to lose all my memories! They gave me back my old hard drive. Is there anyone that could help me?

    I think how you understand the value of having backups. All you can do is:
    General File Recovery
    If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as MAC Data Recovery, Data Rescue II, File Salvage or TechTool Pro.  Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive.  Two free alternatives are Disk Drill and TestDisk.  Look for them and demos at MacUpdate or CNET Downloads. Recovery software usually provide trial versions that enable you to determine if the software would help before actually paying for it. Beyond this or if the drive has completely failed, then you would need to send the drive to a recovery service which is very expensive.
    The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
    Also visit The XLab FAQs and read the FAQ on Data Recovery.
    You will need an external enclosure for the old drive so you can connect it to the computer in order to try the recovery software before you buy it. But if they don't work then you will need to send the drive to a recovery service such as Drive Savers.

  • I had to replace the hardrive on my laptop. I have over 2000 photos in an album on my iPod Touch but I am unable to get the pictures off the iPod and back onto my computer. Suggestions?

    I am in need of assistance with syncing photos on my iPod onto my laptop. Had to replace the hardrive on the laptop and I'm unable to get the photos synced from the iPod.     

    - If the photos were taken by or saved to the iPod just use the computer's camera/image capture software to get them from the iPod.
    - If the photos were synced to the iPod you need a third-party program such as PhoneView of TouchCopy.

  • AppleTV only gets clear picture on HDMI 1, HDMI 2 and 3 are dull pictures

    My new AppleTV works fine but only in HDMI 1. Both HDMI 2 and 3 are a very dull picture. I've got a Panasonic 42" plasma. TV looks dull when plugged into HDMI 2 and 3 also. What am I missing?
    I couldn't have 2 bad inputs could I?
    Your help is appreciated.
    Cheers
    mrjazz

    Does the Panasonic support different Picture Settings for each input - a desirable feature but which could cause confusion.
    Are HDMI 2 and 3 inputs set for Cinema or Eco mode or similar, rather than Normal or Dynamic (I think these are the names)?
    Brightnes/colour/contrast may all be independently adjustable too, if settings are adjustable for each input ensure they're identical before making comparisons.
    Cinema mode will look washed out comapred to normal/dynamic but is often regarded as mre faithful and less saturated but it all boild down to personal preference.

  • I had OS Maverick and downloaded OS X Yosemite and then cleared the mistakenly cleared the hard-drive while trying to re-download OS Maverick and now should I re-download OS X Yosemite in attempts of getting the pictures, videos, and documents back?

    I had OS Maverick and downloaded OS X Yosemite and then cleared the mistakenly cleared the hard-drive while trying to re-download OS Maverick and now should I re-download OS X Yosemite in attempts of getting the pictures, videos, and documents back? 

    No; try using a data recovery product such as the ones listed here. Don't write anything else to the drive until the files are recovered or you choose not to recover them.
    (120682)

  • I am a residential appraiser and recently purchased an ipad4 to use for my home inspections.  Some homes are foreclose without power and I am unable to get a good picture without a flash.  Does anyone know of a flash attachment for the ipad4?

    I am a residential appraiser and recently purchased an ipad 4 to use for my home inspections.  Some homes are foreclosed poperties without power and I am unable to get a good interior picture without a flash.  Does anyone know of a flash attachment for the ipad 4? I found a flash attachment for the ipad 2, but it does not work with the ipad 4.

    I'm sorry to hear that.
    I'm not affiliated w/ the developer, just a happy user that gave up fighting the apple podcast app a while ago.  I used to have a bunch of smart playlists in itunes for my podcasts, and come home every day and pathologically synced my phone as soon as I walked in the door, and again before I walked out the door in the morning.
    Since my wife was doing this too, we were fighting over who's turn it was to sync their phone.
    Since I've switched to Downcast, I no longer worry about syncing my phone to itunes at all.  I can go weeks between syncs.
    Setup a "playlist" in downcast (ex., "Commute") and add podcasts to that playlist.  Add another playlist ("walk" or "workout") and add different podcasts to that one. 
    Set podcast priorities on a per-feed basis (ex., high priority for some daily news feeds, medium priority for some favorite podcasts, lower priority for other stuff).  Downcast will play the things in the priority you specify, and within that priority, it will play in date order (oldest to newest).
    Allegedly, it will also sync your play status to other devices, although that is not a feature I currently use and can't vouch for.  It uses apple's iCloud APIs, so to some extent may be limited by what Apple's APIs can do.

  • Can anyone recommend an alternative software programme to Pages? I have an OS X 10.7.5 macbook pro, so I am unable to get it. I want a programme that I can create docs with pictures and text on, invitations, posters etc. Many thanks in advance-..

    Can anyone recommend an alternative software programme to Pages? I have an OS X 10.7.5 macbook pro, so I am unable to get it. I want a programme that I can create docs with pictures and text on, invitations, posters etc. Many thanks in advance…..

    LibreOffice

  • I updated my phone and it cleared everything on it and I don't have an icloud or itunes backup. Please help I need to get my pictures and information back

    I updated my phone and it cleared everything on it and I don't have an icloud or itunes backup. Please help I need to get my pictures and information back

    Sorry, but without a backup in iCloud or iTunes on your computer, your data is gone and can't be restored anymore.

  • I just purchased a mac air and am unable to get my entire music library and pictures moved from my iPhone.  I subscribed to match and it wants to delete everything on my iPhone and replace with nothing from the new computer  How do I get my music and pict

    I just purchased a mac air and cannot figure out how to get my pictures from my toshiba windows to the air into iphoto and I also cannot get my library of music and apps to get to the mac air as well.  Each time I try to synch it tells me it will repace my ipad and iphone with the blank library from the new air.  How do I get my music, apps and photos to the air.  I just subscribed to imatch and it charged me and only has 600 of my 2,000 songs!

    You must move your photos and music from your Toshiba to your MBA directly, not using the iPhone. The Migration Assistant app on your Mac will help.

  • My iPhone 4 has a cracked screen that I cannot see anything on it. I want to clear my pictures off of it before I sell it. I plugged it into my Surface RT, but I cannot download iTunes and I cannot unlock my phone. How can I get my pictures off my phone?

    I have a cracked iPhone 4. It still works, but the body is cracked and I cannot see the screen. I want to get my pictures off before I sell it. I have a Microsoft Surface RT and cannot download iTunes, and I cannot unlock my phone because I cannot see the screen. Any suggestions?

    The solution would have been to back up your photos to your computer before the screen broke.
    It's too late now.  But you'll know for next time.

  • How to get CLEAR photos on the Touch?

    I love my iPod touch, but there's one thing that has always bothered my - photos sync'd through iPhoto-->iTunes are grainy and have bad color. Until now, I've been unable to prove this - but finally I've found a way to prove that it's not just in my head. So, I'm wondering if anyone knows a way to get clear photos on the Touch ... ?
    First of all, after using the app "PhoneView" to download my sync'd pictures from my iPod BACK to my Mac, I've noticed that the resolutions are different for pictures, depending on whether their orientation is portrait or landscape. For portrait 4x6 images, the resolution is indeed 480x320. However, for landscape orientation, the resolution is consistently 640x426. I think it's kind of odd that iTunes would be sizing photos differently depending on their orientation ... I usually have my full-resolution pictures in iPhoto and sync those images through iTunes, but today I also tried manually resizing my pictures to 640x426 (landscape) and 480x320 (portrait) and then syncing them as a folder, rather than through iPhoto. The results were the same as doing it through iPhoto: disappointing. I've put together a sample, below:
    !http://www.mavisxp.com/ipod/iTunes_compression.png!
    and another example here.
    As you can see, even the manually resized images are turning out horribly grainy. What's even more disappointing than the image quality, however, is the file size: my original JPG is 84KB, but the iTunes' "optimized" JPG is five times as large (456KB) with inaccurate color and awful grain to boot. I mean, it looks like someone dribbled a basketball all over a glossy print (seriously, that grain's pattern is an exact match with the grain on a basketball) ... Is it supposed to look like that?
    +After examining the EXIF data for both pictures, I've noticed another oddity which explains the bad color at least - when iTunes 'optimizes' pictures for the iPod, it apparently assigns them your monitor's color profile! Was this just an oversight that has yet to be corrected? When I export my pictures from Lightroom to iPhoto, I always use the sRGB profile because it's the most standard profile to use when sharing pictures (posting online, emailing, etc) ... My iMac's color profile is a custom Spyder2Pro profile, but that profile is only accurate for THIS MONITOR - certainly not my iPod! Anyway, I've uploaded the original pictures if anyone is interested in checking them out - you can download them in a zip archive here.+
    This is the second iPod I've noticed grainy pictures with, so I know it's not just defective hardware. So I guess my question is simple: does anyone know of ANY way to get clear photos sync'd with the iPod Touch or iPhone? I've poked through plists in iTunes.app and preferences, etc - but I haven't found anything. Any ideas?

    Thanks for the reply, Duddo.
    I guess you're right, Apple probably just wanted to simplify the syncing process and make it consistent for all users. And no, most users probably won't notice that awful grain and poor color reproduction.
    That said, I think it's a real shame to waste the capabilities of the iPhone/Touch like this. Wasting storage space is asinine (increasing file size 5X when 'optimizing'?!) not only due to the limited storage space available in the first place, but also due to the fact that smaller files are quicker and easier to load and manipulate. Overwriting color profiles is just sloppy coding, an oversight - hopefully one they'll soon fix. But the biggest problem for me is that the pinch/zoom functionality is USELESS because if you zoom in at all, the grain is so blatantly obvious. I found an old discussion thread on another forum which mentions this problem, according to several posters there, the grain problem was introduced AFTER the iPhone launched (meaning it can likely be corrected in a firmware update or an iTunes update) ... You can check out that discussion here, if you're interested:
    http://www.everythingicafe.com/forum/iphone/not-optimize-photos-8264.html
    Anyway thanks again for your reply. I'll keep my eye on this thread and if I hear anything about this issue (or a workaround) I'll be sure to post it!

  • Unable to get Material No and Description from VBAP

    Hi Gurus
    Can anyone please help me to get material number and description from vbap table, The report is fine but I am unable to get material no and description.
    regards
    report ZCHGDOC_BY_SALES no standard page heading
                              line-size 132.
    type-pools:
      slis.                     " ALV types
    Tables
    tables:
      cdhdr,                    " Change documents: Header
      cdpos,                    " Change documents: Items
      vbak,                     " Sales order: Header
      mara,                     " Material No
      user_addr,                 " User Address
      vbap.                     " Contract order: Items
    Types
    types:
      begin of ty_cdhdr,
        objectclas like cdhdr-objectclas,     " Object class
        objectid   like cdhdr-objectid,       " Object value
        changenr   like cdhdr-changenr,       " Document change number
        username   like cdhdr-username,       " Changed by
        udate      like cdhdr-udate,          " Changed on
        utime      like cdhdr-utime,          " Changed at
        tcode      like cdhdr-tcode,          " Transaction code
      end of ty_cdhdr,
      ty_it_cdhdr type ty_cdhdr occurs 0,
      begin of ty_cdpos,
        objectclas like cdpos-objectclas,     " Object class
        objectid   like cdpos-objectid,       " Object value
        changenr   like cdpos-changenr,       " Document change number
        tabname    like cdpos-tabname,        " Table name
        tabkey     like cdpos-tabkey,         " Table key
        fname      like cdpos-fname,          " Field name
        chngind    like cdpos-chngind,        " Change indicator
        value_new  like cdpos-value_new,      " New value of field
        value_old  like cdpos-value_old,      " Old value of field
      end of ty_cdpos,
      ty_it_cdpos type ty_cdpos occurs 0,
      begin of ty_dd03l,
        tabname   like dd03l-tabname,
        fieldname like dd03l-fieldname,
        as4local  like dd03l-as4local,
        as4vers   like dd03l-as4vers,
        rollname  like dd03l-rollname,
      end of ty_dd03l,
      ty_it_dd03l type ty_dd03l occurs 0,
      begin of ty_dd04t,
        rollname   like dd04t-rollname,
        ddlanguage like dd04t-ddlanguage,
        as4local   like dd04t-as4local,
        as4vers    like dd04t-as4vers,
        scrtext_l  like dd04t-scrtext_l,
      end of ty_dd04t,
      ty_it_dd04t type ty_dd04t occurs 0,
      begin of ty_kna1,
        kunnr like kna1-kunnr,                 " Customer number
        name1 like kna1-name1,                 " Customer name
      end of ty_kna1,
      ty_it_kna1 type ty_kna1 occurs 0,
       begin of ty_user_addr,
        bname    like user_addr-bname,              " user no
        name_textc like user_addr-name_textc ,      " Username
      end of ty_user_addr,
      ty_it_user_addr type ty_user_addr occurs 0,
      begin of ty_vbap,
        matnr     like vbap-matnr,             " Material No
        arktx     like vbap-arktx,             " Production Description
      end of ty_vbap,
      ty_it_vbap type ty_vbap occurs 0,
      ty_text(500) type c,
      ty_lines type tline,
      ty_it_lines type ty_lines occurs 0,
      begin of ty_merged,
        vbeln     like vbak-vbeln,            " Sales order number
        erdat     like vbak-erdat,            " Created on
        auart     like vbak-auart,            " Order type
        faksk     like vbak-faksk,            " Billing block in SD document
        netwr     like vbak-netwr,            " Net value
        waerk     like vbak-waerk,            " Currency
        vkorg     like vbak-vkorg,            " Sales organisation
        vtweg     like vbak-vtweg,            " Distribution channel
        vkbur     like vbak-vkbur,            " Sales office
        fkara     like vbak-fkara,            " Proposed billing type
        kunnr     like vbak-kunnr,            " Sold-to party
        bname     like vbak-bname ,           " User No
        xblnr     like vbak-xblnr,            " Reference
        fbuda     like vbkd-fbuda,            " Date services rendered
        username  like cdhdr-username,        " Changed by
        udate     like cdhdr-udate,           " Changed on
        utime     like cdhdr-utime,           " Changed at
        tcode     like cdhdr-tcode,           " Transaction code
        tabname   like cdpos-tabname,         " Table name
        tabkey    like cdpos-tabkey,          " Table key
        fname     like cdpos-fname,           " Field name
        chngind   like cdpos-chngind,         " Change indicator
        value_new like cdpos-value_new,       " New value of field
        value_old like cdpos-value_old,       " Old value of field
        scrtext_l like dd04t-scrtext_l,       " Description of field
        intnote   type ty_text,               " Internal note
        hdrnote   type ty_text,               " Header note
        name1     like adrc-name1,            " Sold-to party name
        matnr     like vbap-matnr,            " Material No
        arktx     like vbap-arktx,            " Product Description
      end of ty_merged,
      ty_it_merged type ty_merged occurs 0,
      begin of ty_vbak,
        vbeln    like vbak-vbeln,             " Sales order number
        erdat    like vbak-erdat,             " Created on
        auart    like vbak-auart,             " Order type
        faksk    like vbak-faksk,             " Billing block in SD document
        netwr    like vbak-netwr,             " Net value
        waerk    like vbak-waerk,             " Currency
        vkorg    like vbak-vkorg,             " Sales organisation
        vtweg    like vbak-vtweg,             " Distribution channel
        vkbur    like vbak-vkbur,             " Sales office
        fkara    like vbak-fkara,             " Proposed billing type
        kunnr    like vbak-kunnr,             " Sold-to party
        xblnr    like vbak-xblnr,             " Reference
        objectid like cdhdr-objectid,         " Change document object
      end of ty_vbak,
      ty_it_vbak type ty_vbak occurs 0,
      begin of ty_vbkd,
        vbeln like vbkd-vbeln,                " Sales order number
        posnr like vbkd-posnr,                " Sales order item
        fbuda like vbkd-fbuda,                " Date services rendered
      end of ty_vbkd,
      ty_it_vbkd type ty_vbkd occurs 0.
    Internal tables
    data:
      it_cdhdr    type ty_it_cdhdr,
      it_cdpos    type ty_it_cdpos,
      it_fieldcat type slis_t_fieldcat_alv,
      it_kna1     type ty_it_kna1,
      it_user_addr type ty_it_user_addr,
      it_merged   type ty_it_merged,
      it_vbak     type ty_it_vbak,
    Material No
      it_vbap     type ty_it_vbap,
      it_vbkd     type ty_it_vbkd.
    data:
      wa_vbak  type ty_vbak.
    data:
      st_tvariant  like disvariant,
      st_variant   like disvariant.
    constants:
      co_as4local_a           like dd03l-as4local     " Active version
                              value 'A',
      co_objectclas_verkbeleg like cdhdr-objectclas
                              value 'VERKBELEG',
      co_posnr_initial        like vbkd-posnr         " Initial item number
                              value is initial,
      co_posnr_initial_2        like vbap-posnr         " Initial item number
                              value is initial,
      co_save_u               type c                  " User display variant
                              value 'U',              " saving allowed.
      co_trvog_0              like vbak-trvog         " Sales order
                              value '0'.
    data:
      va_exit                 type c,                 " ALV display
      va_tabix                like sy-tabix.
    selection-screen: begin of block b1 with frame title text-001.
    select-options:
      s_vkorg  for vbak-vkorg OBLIGATORY,            " Sales organisation
      s_vkbur  for vbak-vkbur,            " Sales office
      s_vtweg  for vbak-vtweg,            " Distribution channel
      s_vbeln  for vbak-vbeln,            " Sales order number
      s_usrnme for cdhdr-username,        " Changed by
      s_udate  for cdhdr-udate.           " Changed on
    selection-screen: end of block b1,
                      begin of block b2 with frame title text-002.
    parameters:
      p_varint like disvariant-variant.   " Display variant.
    selection-screen: end of block b2.
    Initialization
    initialization.
    Load display variant.
      if not p_varint is initial.
        move st_variant to st_tvariant.
        move p_varint to st_tvariant-variant.
        call function 'REUSE_ALV_VARIANT_EXISTENCE'
             exporting
                  i_save     = co_save_u
             changing
                  cs_variant = st_tvariant.
        st_variant = st_tvariant.
      else.
        clear st_variant.
        st_variant-report = sy-repid.
      endif.
    at selection-screen on value-request for p_varint.
    Provide display variant list for this program.
      call function 'REUSE_ALV_VARIANT_F4'
           exporting
                is_variant = st_variant
                i_save     = co_save_u
           importing
                e_exit     = va_exit
                es_variant = st_tvariant
           exceptions
                not_found  = 2.
      if sy-subrc eq 2.
        message id sy-msgid type 'S'
                number sy-msgno
                with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      else.
        if va_exit eq space.
          st_variant = st_tvariant.
          p_varint = st_tvariant-variant.
        endif.
      endif.
    At selection screen
    at selection-screen.
    Load display variant.
      if not p_varint is initial.
        move st_variant to st_tvariant.
        move p_varint to st_tvariant-variant.
        call function 'REUSE_ALV_VARIANT_EXISTENCE'
             exporting
                  i_save     = co_save_u
             changing
                  cs_variant = st_tvariant.
        st_variant = st_tvariant.
      else.
        clear st_variant.
        st_variant-report = sy-repid.
      endif.
    Start of selection
    Extract order details from VBAK
      select vbeln erdat auart faksk netwr waerk vkorg vtweg vkbur fkara
             kunnr xblnr
             from  vbak
             into  table it_vbak
             where vkorg in s_vkorg
             and   vkbur in s_vkbur
             and   vbeln in s_vbeln.
      if sy-subrc ne 0.
      No data found for selection
        message s001(zgen).
        exit.
      endif.
      loop at it_vbak into wa_vbak.
        va_tabix = sy-tabix.
        wa_vbak-objectid = wa_vbak-vbeln.
        modify it_vbak from wa_vbak
                       index va_tabix
                       transporting objectid.
      endloop.
    if sy-subrc ne 0.
      No data found for selection
       message s001(zgen).
       exit.
    endif.
    loop at it_vbak into wa_vbak.
       va_tabix = sy-tabix.
       wa_vbak-objectid = wa_vbak-vbeln.
       modify it_vbak from wa_vbak
                      index va_tabix
                      transporting objectid.
    endloop.
    Extract  Change data
      select objectclas objectid changenr username udate utime tcode
             from  cdhdr
             into  table it_cdhdr
             for   all entries in it_vbak
             where objectclas eq co_objectclas_verkbeleg
             and   objectid   eq it_vbak-objectid
             and   username   in s_usrnme
             and   udate      in s_udate.
      if sy-subrc eq 0.
        select objectclas objectid changenr tabname tabkey fname chngind
               value_new value_old
               from  cdpos
               into  table it_cdpos
               for   all entries in it_cdhdr
               where fname NE 'CMPRE_FLT'
               and objectclas eq it_cdhdr-objectclas
               and   objectid   eq it_cdhdr-objectid
               and   changenr   eq it_cdhdr-changenr.
      endif.
    Extract customer details from KNA1
      select kunnr name1
             from  kna1
             into  table it_kna1
             for   all entries in it_vbak
             where kunnr eq it_vbak-kunnr.
    ---- Changes are made here -
    Extract Material details from vbap
      select matnr arktx
             from  vbap
             into  table it_vbap
             for   all entries in it_vbak
             where
             vbeln eq it_vbak-vbeln
              and   posnr eq co_posnr_initial.
    -----------------End of Change ----------------------*
    Extract Contract No from vbkd.
      select vbeln posnr fbuda
             from  vbkd
             into  table it_vbkd
             for   all entries in it_vbak
             where vbeln eq it_vbak-vbeln
             and   posnr eq co_posnr_initial.
      perform merge_data tables it_cdhdr
                                it_cdpos
                                it_kna1
                                it_user_addr
                                it_merged
                                it_vbak
                                it_vbap
                                it_vbkd.
      if it_merged[] is initial.
        message s001(zgen).
        exit.
      endif.
    Release memory no longer required.
      free: it_cdhdr,
            it_cdpos,
            it_kna1,
            it_user_addr,
            it_vbak,
            it_vbap,
            it_vbkd.
    Build field catalog for call to report function
      perform build_field_catalog tables it_fieldcat.
    Output report.
      perform output_report tables it_fieldcat
                                   it_merged.
    *&      Form  merge_data
          text
    form merge_data  tables   pa_it_cdhdr  type ty_it_cdhdr
                              pa_it_cdpos  type ty_it_cdpos
                              pa_it_kna1   type ty_it_kna1
                              pa_it_user_addr type ty_it_user_addr
                              pa_it_merged type ty_it_merged
                              pa_it_vbak   type ty_it_vbak
                              pa_it_vbap   type ty_it_vbap
                              pa_it_vbkd   type ty_it_vbkd.
    Local internal tables
    data:
      lit_dd03l type ty_it_dd03l,
      lit_dd04t type ty_it_dd04t.
    Local work areas
    data:
      lwa_cdhdr  type ty_cdhdr,
      lwa_cdpos  type ty_cdpos,
      lwa_dd03l  type ty_dd03l,
      lwa_dd04t  type ty_dd04t,
      lwa_kna1   type ty_kna1,
      lwa_user_addr type ty_user_addr,
      lwa_merged type ty_merged,
      lwa_vbak   type ty_vbak,
      lwa_vbap   type ty_vbap,
      lwa_vbkd   type ty_vbkd.
    Local variables
    data:
      lva_dd03l_tabix like sy-tabix,
      lva_dd04t_tabix like sy-tabix.
    Sort Data
      sort pa_it_cdhdr by objectid changenr.
      sort pa_it_cdpos by objectid changenr tabname tabkey fname.
      sort pa_it_kna1  by kunnr.
      sort pa_it_user_addr by bname.
      sort pa_it_vbak  by vbeln.
       sort pa_it_vbkd  by vbeln.
      loop at pa_it_vbak into lwa_vbak.
        clear lwa_merged.
      Assign sales order fields to reporting work area
        lwa_merged-vbeln = lwa_vbak-vbeln.
        lwa_merged-erdat = lwa_vbak-erdat.
        lwa_merged-auart = lwa_vbak-auart.
        lwa_merged-faksk = lwa_vbak-faksk.
        lwa_merged-netwr = lwa_vbak-netwr.
        lwa_merged-waerk = lwa_vbak-waerk.
        lwa_merged-vkorg = lwa_vbak-vkorg.
        lwa_merged-vtweg = lwa_vbak-vtweg.
        lwa_merged-vkbur = lwa_vbak-vkbur.
        lwa_merged-fkara = lwa_vbak-fkara.
        lwa_merged-kunnr = lwa_vbak-kunnr.
       lwa_merged-bname = 1wa_user_addr-bname.
        lwa_merged-xblnr = lwa_vbak-xblnr.
    Assgin Material to reporting work area
       lwa_merged-matnr  = lwa_vbap-vbeln.
      Get name of sold-to party from PA_IT_KNA1
        clear lwa_kna1.
        read table pa_it_kna1 into lwa_kna1
                              with key kunnr = lwa_vbak-kunnr
                              binary search.
        lwa_merged-name1 = lwa_kna1-name1.
      Get name  from PA_it_user_addr
       clear lwa_user_addr.
       read table pa_it_user_addr into lwa_user_addr
                             with key  = lwa_user_addr-bname
                             binary search.
       lwa_merged-username = lwa_user_addr-name_textc.
      Get business data from PA_IT_VBKD.
        clear lwa_vbkd.
        read table pa_it_vbkd into lwa_vbkd
                              with key vbeln = lwa_vbak-vbeln
                              binary search.
        lwa_merged-fbuda = lwa_vbkd-fbuda.
    Get Material Data
      clear lwa_vbap.
        read table pa_it_vbap into lwa_vbap
                             with key matnr = lwa_vbap-matnr
                                with key vbeln = lwa_vbak-vbeln
                              binary search.
        lwa_merged-arktx = lwa_vbap-arktx.
      Get internal note text for sales order
        perform read_text using '0002'
                                '1'
                                lwa_merged-vbeln
                                'VBBK'
                                lwa_merged-intnote.
      Get header note 1 text for sales order
        perform read_text using 'Z002'
                                '1'
                                lwa_merged-vbeln
                                'VBBK'
                                lwa_merged-hdrnote.
      Determine if change documents exist for sales order.
        clear lwa_cdhdr.
        read table pa_it_cdhdr into lwa_cdhdr
                               with key objectid = lwa_vbak-objectid.
        if sy-subrc ne 0.
          continue.
        endif.
        loop at pa_it_cdhdr into lwa_cdhdr
                            from sy-tabix.
          lwa_merged-username = lwa_cdhdr-username.
          lwa_merged-udate    = lwa_cdhdr-udate.
          lwa_merged-utime    = lwa_cdhdr-utime.
          lwa_merged-tcode    = lwa_cdhdr-tcode.
          clear lwa_cdpos.
          read table pa_it_cdpos into lwa_cdpos
                                 with key objectid = lwa_cdhdr-objectid
                                          changenr = lwa_cdhdr-changenr
                                 binary search.
          loop at pa_it_cdpos into lwa_cdpos
                              from sy-tabix.
            lwa_merged-tabname   = lwa_cdpos-tabname.
            lwa_merged-tabkey    = lwa_cdpos-tabkey.
            lwa_merged-fname     = lwa_cdpos-fname.
            lwa_merged-chngind   = lwa_cdpos-chngind.
            lwa_merged-value_new = lwa_cdpos-value_new.
            lwa_merged-value_old = lwa_cdpos-value_old.
          Get description for field - determine date element
            clear lwa_dd03l.
            read table lit_dd03l into lwa_dd03l
                                 with key tabname   = lwa_cdpos-tabname
                                          fieldname = lwa_cdpos-fname
                                 binary search.
            lva_dd03l_tabix = sy-tabix.
            if sy-subrc ne 0.
              select single tabname fieldname as4local as4vers rollname
                     from   dd03l
                     into   lwa_dd03l
                     where  tabname   eq lwa_cdpos-tabname
                     and    fieldname eq lwa_cdpos-fname
                     and    as4local  eq co_as4local_a.
              if sy-subrc eq 0.
                insert lwa_dd03l into lit_dd03l
                                 index lva_dd03l_tabix.
              endif.
            endif.
          If data element was found, get description
            if not lwa_dd03l is initial.
              clear lwa_dd04t.
              read table lit_dd04t into lwa_dd04t
                                   with key rollname   = lwa_dd03l-rollname
                                            ddlanguage = sy-langu
                                   binary search.
              lva_dd04t_tabix = sy-tabix.
              if sy-subrc ne 0.
                select single rollname ddlanguage as4local as4vers scrtext_l
                       from  dd04t
                       into  lwa_dd04t
                       where rollname   eq lwa_dd03l-rollname
                       and   ddlanguage eq sy-langu.
                if sy-subrc eq 0.
                  insert lwa_dd04t into lit_dd04t
                                   index lva_dd04t_tabix.
                else.
                  lwa_dd04t-scrtext_l = 'Description for field not found'.
                endif.
              endif.
            endif.
            lwa_merged-scrtext_l = lwa_dd04t-scrtext_l.
            append lwa_merged to pa_it_merged.
            at end of changenr.
            Only process field changes for this change document.
              exit.
            endat.
          endloop.
          at end of objectid.
          Initialise work area so we know change document for order has
          been processed.
            clear lwa_merged.
          Only process change documents for this sales order.
            exit.
          endat.
        endloop.
      endloop.
    endform.                    " merge_data
    *&      Form  build_field_catalog
          text
    form build_field_catalog tables pa_it_fieldcat type slis_t_fieldcat_alv.
    data:
    Local variable
      lva_col_pos   type slis_fieldcat_alv-col_pos,
    Local structure
      st_fieldcat   type slis_fieldcat_alv.
      lva_col_pos = 0.
      clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'VBELN'.
      st_fieldcat-ref_tabname   = 'VBAK'.
      st_fieldcat-ref_fieldname = 'VBELN'.
      st_fieldcat-row_pos       = '1'.
      st_fieldcat-col_pos       = lva_col_pos.
      append st_fieldcat to pa_it_fieldcat.
      clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'VKBUR'.
      st_fieldcat-ref_tabname   = 'VBAK'.
      st_fieldcat-ref_fieldname = 'VKBUR'.
      st_fieldcat-row_pos       = '1'.
      st_fieldcat-outputlen = '6'.
      st_fieldcat-col_pos       = lva_col_pos.
      append st_fieldcat to pa_it_fieldcat.
    clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'VKORG'.
      st_fieldcat-ref_tabname   = 'VBAK'.
      st_fieldcat-ref_fieldname = 'VKORG'.
      st_fieldcat-row_pos       = '1'.
      st_fieldcat-outputlen = '6'.
      st_fieldcat-col_pos       = lva_col_pos.
      append st_fieldcat to pa_it_fieldcat.
    clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'KUNNR'.
      st_fieldcat-ref_tabname   = 'VBAK'.
      st_fieldcat-ref_fieldname = 'KUNNR'.
      st_fieldcat-row_pos       = '1'.
      st_fieldcat-col_pos       = lva_col_pos.
        st_fieldcat-outputlen = '6'.
      append st_fieldcat to pa_it_fieldcat.
    clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'NAME1'.
      st_fieldcat-ref_tabname   = 'KNA1'.
      st_fieldcat-ref_fieldname = 'NAME1'.
      st_fieldcat-row_pos       = '1'.
        st_fieldcat-outputlen = '15'.
      st_fieldcat-col_pos       = lva_col_pos.
      append st_fieldcat to pa_it_fieldcat.
    clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'MATNR'.
      st_fieldcat-ref_tabname   = 'VBAP'.
      st_fieldcat-ref_fieldname = 'MATNR'.
      st_fieldcat-row_pos       = '1'.
      st_fieldcat-col_pos       = lva_col_pos.
        st_fieldcat-outputlen = '6'.
      append st_fieldcat to pa_it_fieldcat.
    clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'SCRTEXT_L'.
      st_fieldcat-ref_tabname   = 'DD04T'.
      st_fieldcat-ref_fieldname = 'SCRTEXT_L'.
      st_fieldcat-row_pos       = '1'.
       st_fieldcat-outputlen = '20'.
      st_fieldcat-col_pos       = lva_col_pos.
      append st_fieldcat to pa_it_fieldcat.
      clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'UDATE'.
      st_fieldcat-ref_tabname   = 'CDHDR'.
      st_fieldcat-ref_fieldname = 'UDATE'.
      st_fieldcat-row_pos       = '1'.
      st_fieldcat-outputlen = '10'.
      st_fieldcat-col_pos       = lva_col_pos.
      append st_fieldcat to pa_it_fieldcat.
      clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'USERNAME'.
      st_fieldcat-ref_tabname   = 'CDHDR'.
      st_fieldcat-ref_fieldname = 'USERNAME'.
      st_fieldcat-row_pos       = '1'.
      st_fieldcat-outputlen = '6'.
      st_fieldcat-col_pos       = lva_col_pos.
      append st_fieldcat to pa_it_fieldcat.
      clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'FNAME'.
      st_fieldcat-ref_tabname   = 'CDPOS'.
      st_fieldcat-ref_fieldname = 'FNAME'.
      st_fieldcat-row_pos       = '4'.
      st_fieldcat-outputlen = '8'.
      st_fieldcat-col_pos       = lva_col_pos.
      append st_fieldcat to pa_it_fieldcat.
      clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'CHNGIND'.
      st_fieldcat-ref_tabname   = 'CDPOS'.
      st_fieldcat-ref_fieldname = 'CHNGIND'.
      st_fieldcat-row_pos       = '1'.
      st_fieldcat-outputlen = '8'.
      st_fieldcat-col_pos       = lva_col_pos.
      append st_fieldcat to pa_it_fieldcat.
      clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'WAERK'.
      st_fieldcat-ref_tabname   = 'VBAK'.
      st_fieldcat-ref_fieldname = 'WAERK'.
      st_fieldcat-row_pos       = '1'.
      st_fieldcat-outputlen = '5'.
      st_fieldcat-col_pos       = lva_col_pos..
      append st_fieldcat to pa_it_fieldcat.
      clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'VALUE_NEW'.
      st_fieldcat-ref_tabname   = 'CDPOS'.
      st_fieldcat-ref_fieldname = 'VALUE_NEW'.
      st_fieldcat-row_pos       = '1'.
      st_fieldcat-outputlen = '20'.
      st_fieldcat-col_pos       = lva_col_pos.
      append st_fieldcat to pa_it_fieldcat.
      clear st_fieldcat.
      add 1 to lva_col_pos.
      st_fieldcat-tabname       = 'PA_IT_MERGED'.
      st_fieldcat-fieldname     = 'VALUE_OLD'.
      st_fieldcat-ref_tabname   = 'CDPOS'.
      st_fieldcat-ref_fieldname = 'VALUE_OLD'.
      st_fieldcat-row_pos       = '1'.
      st_fieldcat-outputlen = '20'.
      st_fieldcat-col_pos       = lva_col_pos.
      append st_fieldcat to pa_it_fieldcat.
    endform.                    " build_field_catalog
    *&      Form  output_report
          text
    form output_report tables pa_it_fieldcat type slis_t_fieldcat_alv
                              pa_it_merged   type ty_it_merged.
    Local variables
    data:
      lva_formname type slis_formname,
      lva_repid    like sy-repid.
      lva_repid = sy-repid.
      lva_formname = 'ALV_USER_COMMAND'.
      call function 'REUSE_ALV_GRID_DISPLAY'
        exporting
          i_callback_program = lva_repid
          i_callback_user_command = lva_formname
          i_save             = 'A'
          is_variant         = st_variant
          it_fieldcat        = pa_it_fieldcat[]
        tables
          t_outtab           = pa_it_merged
        exceptions
          program_error      = 1
          others             = 2.
    endform.                    " output_report
    *&      Form  alv_user_command
          text
    form alv_user_command using pa_ucomm    like sy-ucomm
                                pa_selfield type slis_selfield.
    Local work areas
    data:
      lwa_merged type ty_merged.
      clear lwa_merged.
      read table it_merged into lwa_merged
                           index pa_selfield-tabindex.
      case pa_selfield-fieldname.
        when 'VBELN'.
        Contract Number
          set parameter id 'AUN' field lwa_merged-vbeln.
         call transaction 'VA03' and skip first screen.
    S_BCE_68001393
    when 'USERNAME'.
        Username
          set parameter id 'username' field lwa_merged-username.
          call transaction 'S_BCE_68001393' and skip first screen.
        when 'KUNNR'.
        Customer number
          set parameter id 'KUN' field lwa_merged-kunnr.
          set parameter id 'VKO' field space.
          set parameter id 'VTW' field space.
          set parameter id 'SPA' field space.
          call transaction 'XD03' and skip first screen.
      endcase.
    endform.                    " alv_user_command
    *&      Form  read_text
          text
    form read_text  using    pa_id
                             pa_inline_count
                             pa_name
                             pa_object
                             pa_text.
    Local internal tables
    data:
      lit_inlines type ty_it_lines,
      lit_lines   type ty_it_lines.
    Local work areas
    data:
      lwa_lines   type ty_lines.
    Local variables
    data:
      lva_tdname    like thead-tdname.
      refresh: lit_inlines,
               lit_lines.
      lva_tdname = pa_name.
      call function 'READ_TEXT_INLINE'
        exporting
          id                    = pa_id
          inline_count          = pa_inline_count
          language              = sy-langu
          name                  = lva_tdname
          object                = pa_object
        tables
          inlines               = lit_inlines
          lines                 = lit_lines
        exceptions
          id                    = 1
          language              = 2
          name                  = 3
          not_found             = 4
          object                = 5
          reference_check       = 6
          others                = 7.
      loop at lit_lines into lwa_lines.
        concatenate pa_text
                    lwa_lines-tdline
                    into pa_text separated by space.
      endloop.
    endform.                    " read_text ENDLOOP.

    Hi
    As per your code here:
    "-------------- Changes are made here ----------------
    *Extract Material details from vbap
    select matnr arktx
    from vbap
    into table it_vbap
    for all entries in it_vbak
    where
    vbeln eq it_vbak-vbeln
    and posnr eq co_posnr_initial.   " Here the condition specifies you want to select sales order items where there is no item number, which i beleive shouldnt be the case
    " -----------------End of Change ----------------------
    Try as below by commenting the Item Number is INITIAL condition:
    select matnr arktx
       from vbap
       into table it_vbap
       for all entries in it_vbak
       where
       vbeln eq it_vbak-vbeln.
    "and posnr eq co_posnr_initial.
    Regards
    Eswar

  • Sony DCR-DVD505 Handycam: Unable to get video clips, audio

    Evaluating Adobe Premier.  Hopefully helpful for other Sony DCR-DVD505 users.
    Objectives:
    1) Get videos from Sony DCR-DVD505 handycam into Premier Elements
    2) Drag and drop various clips into Sceneline
    3) Insert menu markers
    4) Burn DVD
    Stuck in Step 1, getting video from handycam, unable to get video clips (with audio)
    First Try: NO AUDIO.
    The Sony DCR-DVD505 burns a mini-DVD (1.4 GB) while recording.  After "finalizing" the disk, the media may be imported into the computer.  Streaming was supported by Windows XP driver but is no longer supported in Windows Vista.   In fact, Vista Service Pack 2 (SP2) does not even recognize the camera as a DVD drive!  So downgraded to Vista SP1 and used the Sony Picture Motion Browser to import media into computer as MPG files.  Each MPG file is a clip (corresponding exactly to camera record on-off sequence while shooting).  Then opened up Adobe Premier Elements 8.  Used get media to import all the MPG clips into "Organize".  Dragged and dropped various clips...inserted a menu or two and...burned the DVD.  PROBLEM: VIDEO OK, BUT NO AUDIO(?!).  The MPG files on computer play fine (with audio) inside Windows Media Players.  Read all sorts of nonsense about why Adobe Premier (probably old versions) cannot work with "low-quality/compressed" MPG and needs to be a particular type AVI soo....
    Second Try: Capture VOB directly
    Forget the camera.  Insert the mini-DVD directly into computer DVD drive, create a new project and followed directions from  "Lowdown on VOB" http://forums.adobe.com/message/2117743 and "tools to convert to DVI" http://forums.adobe.com/thread/415317.  I loaded the VOB directly and dropped them into  Timeline as advised by the second post (only hitch being the first VOB pertaining to the DVD menu is not recognized and is neither needed).
    However, File > Export is always GREYED out (unusable).  And the status at bottom right seems to be looping on "Background Rendering".  DO I WAIT?  In any case, the whole video is showing up as a single continuous stream and what I want are the clips from the camera?! 
    Then I tried Prism (again as per the second forum post mentioned above).  It simply did something to process 30 minutes of video and crashed in the end without explanation - saying there was an error in conversion.
    Is this AVI conversion even a good idea?  How would I get my clips back??
    Bottomline.  My mini-DVD and imported MPGs plays fine in Windows Media Player.  However unable to extract the camera clips (with audio).

    Dawg, I have the Sony DCR-DVD305, and have been using it successfully for quite a while with PE7, with few issues, once I had a workflow nailed down.
    I believe the 505 is basically the same camera, with some additional features.
    This workflow worked for me in the past so I'll pass that along:
    Sony Browser to PC as Mpeg.
    Mpeg to Windows Movie Maker, output to DV-AVI, taking default settings.
    DV-AVI imported into PE7.
    This should also work for PE8.
    Upon getting Cyberlinks PowerDirector v7, my new workflow changed to this:
    I take the min-DVD directly from camcorder to my PC, and capture the disk via Power Director.
    PD will convert the VOB's directly to DV-AVI Type 2 on one pass.
    I then load this DV-AVI into PE7.
    (PD v7 was pre-installed on my new PC from HP, or it can be purchased from Cyberlink).
    Other options to try:
    Copy the VOB's directly from the mini-DVD to your PC and use Prism to convert these to AVI.
    Or load the VOB or Mpeg into PE, then use that to convert to AVI.
    (Export to DV-AVI with PE8 is done with SHARE/PC, not Export under the File Menu, which is greyed out).
    I've had many issues trying to work with Mpeg's and VOB's when loaded directly to PE with limited success.
    So if you can get it converted successfully to AVI outside of PE, I've found this to be a better approach.
    Post results, if any of this works for you...
    Note: One other thing, if you are working directly with VOB's to PE, especially multiple VOB's from a single DVD, you can encounter out-of-sync issues between video and audio. If this occurs, review this link from Muvipix:
    http://muvipix.com/phpBB3/viewtopic.php?f=38&t=2469:

  • SCRIPT5007: Unable to get property 'top' of undefined or null and too much recursion

    I am not sure about placing two questions into one post, but here it goes:
    The error above  "SCRIPT5007: Unable to get property 'top' of undefined or null" is coming from this function:
    Code: 
    $(function () { //this is the way to run your code at the DOM Ready event  $('a').click(function () { $('html, body').animate({ scrollTop: $($(this).attr('href')).offset().top }, 1500); return false; });  });
    This is the effected code I believe that is causing the problem:
    Code: 
    scrollTop: $($(this).attr('href')).offset().top
    the error occurs when I click on a "clear" button in my form. My website is one long page and that function allows my navigation to slide up and down the site. Without it, everytime you click a nav, it jumps to that anchor.
    For the 2nd problem, the too much recursion, the problem lies within here:
    Code: 
    function () { if ($.isReady) return; imReady = true; $.each($.includeStates, function (url, state) { if (!state) return imReady = false }); if (imReady) { $.readyOld.apply($, arguments) } else { setTimeout(arguments.callee, 10) } }
    where the error is actually coming from the 2nd "function" script. This is part of the browser compatibility script for mozilla/opera at the top of the index page. Any help would be great. Thanks.

    Ahh I apologize. I simply was posting to JavaScript forums in hopes of
    finding a solution. Sorry for the mixup.

  • Several applications including Settings open and close immediately, unable to get iTunes to install an update

    While traveling in China, I was unable to get latest iTunes download an update to 4.3.2  (after download is compoleted, is starts processing and says network timed out, without any clear reason) I can download the file separately for an older version without using iTunes fine.
    I have a hunch that the multitude of emails flying in my account is causing trouble, since Mail is one of the apps closing immediately. But I cannot use settings to combat Mail problems....  Anyone any idea???
    Henk

    The "Network timed out " may be a firewall or antivirus on the computer.
    For the apps closing, try the following:
    stop all running apps:
    Double-click the Home button. Hold an icon in the bottom row until the minus sign shows, then touch all minus signs to close all apps.
    Then Press and Hold the Home and Power buttons until the Apple Logo appears, about 10 seconds.

Maybe you are looking for

  • Item Import - completes with " Completed Error" status and process_flag=4

    I am trying to Import Item through Open Interface. RDBMS : 9.2.0.5.0 Oracle Applications : 11.5.10 Populated data into mtl_system_items_interface with process_flag = 1. Once I run the "Item Import" program it completes with error, with the following

  • My late 2012 mac mini boots slow with new ssd drive

    So here is the situation.  I purchased a 128gb ssd drive, installed it a usb enclosure, formatted it to Mac OS Extended (Journaled), cloned it with carbon copy cloner 3,   used the option key during boot up and selected the ssd drive and it booted my

  • Blank Screen on Startup

    So here is how it happened. Started up my ibook today, everything was normal. Plugged in my Lacie External Hard drive, that was normal. Copied my user name folder to back up my files, everthing was going normal. I got an error saying there was some p

  • Block cancelling the cleared billing documents

    Hi Friends, Currently system is allowing to cancel the cleared billing document and business does want to do that, for example when F2 billing type document is cancelled then it is generating S1 type cancelled document. I think I can prevent this by

  • Missing Photographs - 5,000 in total - is there a programmatic way to get the complete file paths missing?

    HostOS : Mac OS X LightRoom version : 4.4 I accidentally moved linked files over the past few years, and just discovered (via "Missing Photos" view) that I have 5,000 missing photos. I know the master photos are on my hard disk drive ... so, that is