HW acceleration (direct2d) causes problems for my site , is there a script to disable it automatically?

direct2d acceleration on FF4 causes really bad font rendering problems for my site.
Text goes on to of each other and behind pictures making it impossible to read for some parts. Disabling HW acceleration fixes the problem. Is there a script that I could use to disable it automatically for my site?

In fact updating my graphics was the cause of the problem. With the old drivers there were no problems. It depends on the system. So far I've tested on 6 Windows PC's. on 2 of them it worked fine. My site should be 100% W3C compliant. It works fine on 3.6, Chrome, IE and Opera

Similar Messages

Facebook for Blackberry causing problems for Facebook site?

For 3 days I have had problems with my Facebook account. It occurred to me that it could possibly be my Facebook for Blackberry application that is causing the problems with my online facebook.. My problems are many..(these probs are on my ONLINE facebook only) ....My chat does not open or show friends online, my news feed only shows posts for about the past 30 minutes and no link at bottom to "view more", no option to "view more" on other pages as well. I cannot view my notifications, it just sits there and spins when I click to view, I cannot access the notifications page in settings nor can I edit or delete any of my facebook applications. I have this problem on any computer I use to access my facebook account, but Facebook on my Blackberry seems to be working fine, except I only get email notifications, no facebook notifications, when there is activity. On my Blackberry, I can view all posts in the news feed, see online friends and chat. I am posting this here because after lots of searching in Facebook Help, I read that sometimes your mobile device can be the cause of your problems on your Facebook account online. Has anyone ever experienced this or know if it is the cause of my headaches or how to fix it? I have cleared the cookies and history on my Blackberry. I have done battery pulls, log out of Facebook, everything short of deleting the application a reinstalling. Any help would be greaty appreciated! Thanks!

hello Charm,
what version of Facebook for BlackBerry are you using?
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Does adding V-Card to signature cause problems for Outlook (Windows) users?

Hi -
I want to add a V-Card to my signature in Apple Mail (by drag and drop from address book to signature pane in Mail>Preferences). I have read that, in the past, this can caused problems for some recipients who use Windows Outlook.
Is this still the case? If so, how can I add a V-Card to my signature without causing problems for recipients?
Thanks -
Doug

I take note of your WNLB recommendation but in this case the error start on one of the CAS server first and client connected to the CAS that does not have any errors continue to work as normal.
I upgraded to SP3 late last year. This problem first happened in Feb 2014.
Have you checked the DNS settings on the VM - yes, and both of them are pointing to one of our DC's.
I would set the client with a Host file to just one CAS to rule out the WNLB - this would be too hard
to manage as when the issue happens again it could happen on CAS1 but the client could be connected to CAS2 so it wont experience the issue.

Does any one know about the small Hardrive that "The Power Company" is producing, sponsored by Indiegogo, for small Apple mobile devices (iPhones, iPods, etc,). Do they work or cause problems for the device or iCloud storage?

Does any one about the small hard drive that "the Power Company" is bringing out as a crowdsourced project by Indiegogo? Does it work, does it cause problems for IOS, iPOD Touch or iCloud?

I have not heard that mentioned here before. What does the Indiegogo page say?

HT204053 I have downloaded Lion onto my MacBook Pro. My husband and I share a desktop. Can download Lion onto the desktop from my Apple ID without causing problems for my husband's Apple ID use.

I have downloaded Lion onto my MacBook Pro. My husband and I share a desktop. Can we download Lion onto the desktop from my Apple ID without causing problems for my husband's Apple ID use?

Yes. In the future, however, only you will be able to update Lion because it will now require your Apple ID.

[svn] 863: Cleanup the jsp for some space issue that causes problem for proxy test on WAS .

Revision: 863
Author: [email protected]
Date: 2008-03-19 11:39:05 -0700 (Wed, 19 Mar 2008)
Log Message:
Cleanup the jsp for some space issue that causes problem for proxy test on WAS. Update both trunk and 3.0.x branch.
Modified Paths:
blazeds/branches/3.0.x/qa/apps/qa-regress/remote/HttpXmlEchoService.jsp
blazeds/trunk/qa/apps/qa-regress/remote/HttpXmlEchoService.jsp

Revision: 863
Author: [email protected]
Date: 2008-03-19 11:39:05 -0700 (Wed, 19 Mar 2008)
Log Message:
Cleanup the jsp for some space issue that causes problem for proxy test on WAS. Update both trunk and 3.0.x branch.
Modified Paths:
blazeds/branches/3.0.x/qa/apps/qa-regress/remote/HttpXmlEchoService.jsp
blazeds/trunk/qa/apps/qa-regress/remote/HttpXmlEchoService.jsp

[solved] Some programs cause problems for sound in other programs.

Today I noticed that audio has stopped working in some applications, but not others. The programs that I know where it doesn't work are:
Hotline Miami (game)
VLC
Dungeons of Dredmor (game)
Uplink (game)
Programs where I know it works are:
mplayer / smplayer (on the same files where vlc does not work)
mpd
Programs run through wine
Standalone flash player and the firefox flash plugin
Additionally, when I run a program where audio doesn't work, I have to restart programs where it does. For example, I'll pause mpd, open Hotline Miami, and then quit. When I try to unpause mpd, I'll get the error message "Failed to open audio output". But if I try a couple times, it will eventually resume. It's a similar situation for mplayer. I'll have to quit and restart mplayer a couple times after trying one of the other programs before audio will work.
Further complicating the matter is that there are no error messages for the programs where audio does not work. I can't seem to track down the problem. I also don't do much with sound beyond using mpd and mplayer, so I don't know when this started.
My hardware is a Lenovo IdeaPad z580 with integrated Intel HDA audio.
EDIT: I just noticed that the problem is not what I thought. Part of the problem was simply due to volume. So I can get sound in the listed programs. However, running those programs does still cause the problem for the mplayer and mpd where I have to restart them.
Last edited by mathfreak (2014-03-10 13:27:10)

Gah. It does appear to have been a pulseaudio thing. I hadn't even realized it was installed, let alone running. I've fixed it. Thanks for the help! And thanks, brebs, for the asoundrc file. I think it'll help a lot.

IPv6 deployment problem for multiple site

Dear Expert,
I have a question about the deployment of IPv6 on two different site and the requirement is that client may need to auto switchover to another site while one of the ASR1002 is failure. I have using two different prefix on two sites with IPv6 stateless autoconfig like above diagram. Different prefix used for each site due to each site should use there own IPv6 prefix for Firewall Stateful(Default gateway point to local site firewall only). Client will retrieved two IPv6 addresses at the same time and it seems workable on Vista PC and Mac(Mac haven't select the High DRP one but work fine) and I haven’t try for other mobile device (have WiFi device for vlan100). Is it a valid solution? Any other solution for multiple site deploy IPv6 with Firewall no NAT enabled?
Thank you very much!
Regards,
Kawaii

One option would be to tweak the OS prefix policy table to prefer v4 to v6. On Linux this is in /etc/gai.conf; on windows you'd run "netsh interface ipv6 set prefixpolicies ...". The side effect would be that you'd only do v6 with the v6-only sites, not with the dual-stack sites.

Firmware Update 1.7 drains battery and causes problems for sound

I have a Macbook Pro early 2011 with a SSD. After installing Firmware 1.7 I saw the beach ball over and over even after rebooting... this problem got resolved after I plugged in power cable and is now gone even when it is running on battery. But the sound of my MBP goes randomly on/off when I plug in/out my headphones and the worst problem is that prior to the 1.7 I got up to 5 hours of battery but now only 2:30 hours. I've only 470 cycles of my battery. Resseting the SMC didn't help and unfortuaneltly there is no way of downgrading the firmware. What should I do?? This is definietly a firmware problem which supposedly was released to solve a rare battery problem on some machines not to cause problems on others.

I am seeing this problem as well.
Before the SMC Update 1.7 the battery was fine. After, it hibernated within a half hour of use on battery. Upon wake-up the Service Battery warning is in the battery menu, and the time remaining calculation has gone from several hours at a full charge to less than 10 minutes.
My battery is original MacBookPro8,2; I rarely work on battery, relying on it mostly to keep my computer going while asleep during a half hour commute to/from work. System Information's Power tab reports
Cycle Count: 19
I plan to try a battery calibration soon; if that fails, then the Apple Store.
e

Does dust under the iphone screen protector cause problems for the retina?

I dont have bubbles under the protector but if I reflect the screen under light I can see tiny dust particles under the protector, they are small white dots. So will this cause issues for the screen and is it worth removing the screen protector itself to fix or will it do nothing to the resolution of the phone?

will this cause issues for the screen
No
will it do nothing to the resolution of the phone?
no

[SOLVED] wxpython update cause problems for playonlinux

After a recent update, playonlinux seems to get stuck in an endless loop during startup. The output in terminal is this:
Looking for python... 3.3.3 - skipped
Looking for python2.7... 2.7.6 - selected
Traceback (most recent call last):
File "mainwindow.py", line 34, in <module>
import wx, wx.aui
File "/usr/lib64/python2.7/site-packages/wx-3.0-gtk2/wx/__init__.py", line 45, in <module>
from wx._core import *
File "/usr/lib64/python2.7/site-packages/wx-3.0-gtk2/wx/_core.py", line 4, in <module>
import _core_
ImportError: /usr/lib64/python2.7/site-packages/wx-3.0-gtk2/wx/_core_.so: symbol _ZTI10wxListBase, version WXU_3.0 not defined in file libwx_baseu-3.0.so.0 with link time reference
Looking for python2.7... 2.7.6 - selected
Traceback (most recent call last):
File "mainwindow.py", line 34, in <module>
import wx, wx.aui
File "/usr/lib64/python2.7/site-packages/wx-3.0-gtk2/wx/__init__.py", line 45, in <module>
from wx._core import *
File "/usr/lib64/python2.7/site-packages/wx-3.0-gtk2/wx/_core.py", line 4, in <module>
import _core_
ImportError: /usr/lib64/python2.7/site-packages/wx-3.0-gtk2/wx/_core_.so: symbol _ZTI10wxListBase, version WXU_3.0 not defined in file libwx_baseu-3.0.so.0 with link time reference
This just keeps repeating until I end the process with Ctrl-c
The specific update that cause this is:
wxgtk
wxpython
wxgtk2.8
The wxgtk2.8 package was newly installed as certain packages require this version. Just to make sure, I removed wxgtk2.8, and downgraded wxgtk and wxpython, then playonlinux works without issue. Upgrading the system again causes this issue to appear again.
Edit: wxgtk upgrades from version 2.8.12.1-5 -> 3.0.0-2, and wxpython upgrades from version 2.8.12.1-4 -> 3.0.0.0-1
I have narrowed down the problem. Downgrading only wxpython to version 2.8.12.1-4 solves the problem.
Last edited by Daerandin (2014-01-12 02:32:41)

I'm on wxpython 3.0.0-2 and I'm still getting this issue, both on wxgtk 2.8.12.1-5 and 3.0.0-2.
And it might help to know that playonlinux depends on the package "wxgtk2.8" rather than wxgtk (and also wxpython2.8), which I can't install without borking my system and don't want to anyway because I use wxMupen64Plus, so I installed every other dep and -Sdd'd it.
EDIT: Scratch that, my error is actually similar but not the same:
Looking for python... 3.3.3 - skipped
Looking for python2.7... 2.7.6 - selected
Traceback (most recent call last):
File "mainwindow.py", line 32, in <module>
wxversion.select('2.8')
File "/usr/lib/python2.7/site-packages/wxversion.py", line 152, in select
raise VersionError("Requested version of wxPython not found")
wxversion.VersionError: Requested version of wxPython not found
And it has the exact same output for either version of wxgtk. I'd test it on wxpython2.8, but that depends on wxgtk2.8, which I can't install without either uninstalling important packages like audacity or forcing conflict overwriting. It also loops this error forever until I CTRL+C.
Last edited by Cadeyrn (2014-02-04 06:29:08)

Internet connexion problem for remote site in Site to site VPN asa 5505

Hi all
I'm configuring a site to site Ipsec VPN in 2 sites using ASA 5505 V 8.2, The VPN is working fine i can ping machine in the 2 sides but the problem is the remote site dont' have internet.
The architecture is, we 2 site Site1 is the main site and Site2 is secondary site there will be Site3, ...
The internet connection is based in Site1 and site2 and site 3 will have internet connection through Site1. Site1, Site2 and Site 3 is interconnected by Ipsec VPN.
Here is my ASA 5505 Configuration :
SITE 1:
ASA Version 8.2(5)
hostname test-malabo
domain-name test.mg
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd ta.qizy4R//ChqQH encrypted
names
interface Ethernet0/0
description "Sortie Internet"
switchport access vlan 2
interface Ethernet0/1
description "Interconnexion"
switchport access vlan 171
interface Ethernet0/2
description "management"
switchport access vlan 10
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 192.168.1.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 41.79.49.42 255.255.255.192
interface Vlan10
nameif mgmt
security-level 0
ip address 10.12.1.100 255.255.0.0
interface Vlan171
nameif interco
security-level 0
ip address 10.22.19.254 255.255.255.0
ftp mode passive
dns server-group DefaultDNS
domain-name test.mg
object-group network LAN-MALABO
description LAN DE MALABO
network-object 192.168.1.0 255.255.255.0
object-group network LAN-BATA
description LAN DE BATA
network-object 192.168.2.0 255.255.255.0
object-group network LAN-LUBA
description LAN DE LUBA
network-object 192.168.3.0 255.255.255.0
access-list interco_1_cryptomap extended permit ip 192.168.1.0 255.255.255.0 192.168.3.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.1.0 255.255.255.0 192.168.3.0 255.255.255.0
pager lines 24
mtu inside 1500
mtu outside 1500
mtu mgmt 1500
mtu interco 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
icmp permit any inside
icmp permit any outside
icmp permit any interco
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
nat (interco) 1 0.0.0.0 0.0.0.0
route outside 0.0.0.0 0.0.0.0 41.79.49.1 1
route interco 192.168.3.0 255.255.255.0 10.22.19.5 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication ssh console LOCAL
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto map interco_map0 1 match address interco_1_cryptomap
crypto map interco_map0 1 set pfs group1
crypto map interco_map0 1 set peer 10.22.19.5
crypto map interco_map0 1 set transform-set ESP-3DES-SHA
crypto map interco_map0 interface interco
crypto ca trustpoint _SmartCallHome_ServerCA
crl configure
crypto isakmp enable interco
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet 192.168.1.0 255.255.255.0 inside
telnet 10.12.0.0 255.255.0.0 mgmt
telnet timeout 30
ssh 192.168.1.0 255.255.255.0 inside
ssh 10.12.0.0 255.255.0.0 mgmt
ssh timeout 30
console timeout 0
management-access interco
dhcpd option 3 ip 192.168.1.1
dhcpd address 192.168.1.100-192.168.1.254 inside
dhcpd dns 41.79.48.66 8.8.8.8 interface inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
username admin password eY/fQXw7Ure8Qrz7 encrypted privilege 15
tunnel-group 10.22.19.5 type ipsec-l2l
tunnel-group 10.22.19.5 ipsec-attributes
pre-shared-key *****
isakmp keepalive threshold 60 retry 5
class-map inspection_default
match default-inspection-traffic
policy-map global_policy
class inspection_default
inspect dns
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect snmp
inspect icmp
prompt hostname context
call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:5aa0d27f15e49ea597c8097cfdb755b8
: end
SITE2:
ASA Version 8.2(5)
hostname test-luba
domain-name test.eg
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
description "Sortie Interco-Internet"
switchport access vlan 2
interface Ethernet0/1
description "management"
switchport access vlan 10
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 192.168.3.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 10.22.19.5 255.255.255.0
interface Vlan10
nameif mgmt
security-level 0
ip address 10.12.1.101 255.255.0.0
ftp mode passive
dns server-group DefaultDNS
domain-name test.eg
object-group network LAN-MALABO
description LAN DE MALABO
network-object 192.168.1.0 255.255.255.0
object-group network LAN-BATA
description LAN DE BATA
network-object 192.168.2.0 255.255.255.0
object-group network LAN-LUBA
description LAN DE LUBA
network-object 192.168.3.0 255.255.255.0
access-list outside_1_cryptomap extended permit ip 192.168.3.0 255.255.255.0 192.168.1.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.3.0 255.255.255.0 192.168.1.0 255.255.255.0
pager lines 24
mtu inside 1500
mtu outside 1500
mtu mgmt 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
nat (inside) 0 access-list inside_nat0_outbound
route outside 0.0.0.0 0.0.0.0 10.22.19.254 1
route outside 192.168.1.0 255.255.255.0 10.22.19.254 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication ssh console LOCAL
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto map outside_map0 1 match address outside_1_cryptomap
crypto map outside_map0 1 set pfs group1
crypto map outside_map0 1 set peer 10.22.19.254
crypto map outside_map0 1 set transform-set ESP-3DES-SHA
crypto map outside_map0 interface outside
crypto ca trustpoint _SmartCallHome_ServerCA
crl configure
crypto ca certificate chain _SmartCallHome_ServerCA
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet 10.12.0.0 255.255.0.0 mgmt
telnet timeout 30
ssh 192.168.3.0 255.255.255.0 inside
ssh 10.12.0.0 255.255.0.0 mgmt
ssh timeout 30
console timeout 0
management-access outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
username admin password eY/fQXw7Ure8Qrz7 encrypted privilege 15
tunnel-group 10.22.19.254 type ipsec-l2l
tunnel-group 10.22.19.254 ipsec-attributes
pre-shared-key *****
isakmp keepalive threshold 60 retry 5
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect ip-options
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
service-policy global_policy global
prompt hostname context
call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:185bd689118ba24f9a0ef2f7e80494f6
Can anybody help why my remote site can't connect to Internet.
REgards,
Raitsarevo

Hi Carv,
Thanks for your reply. i have done finally
i used no crypto ipsec nat-transparency udp-encapsulation in my end router only.
and in remote access VPN i have enabled UDP for client configuration. the most imprtant is i have given IP add of same LAN pool to VPN user,
Regards,
Satya.M

Purch. Req. to COPA link causing problems for PO Goods Receipt

A problem just started occuring in the past week and a half where our Warehouse staff could not receive in goods due to error: "Complete PA transfer structure FI".
What I have found out is that when a Purch. Req. is created with Account Assignment "F" (Internal Order - GR), the corresponding EKBN segment is being created with a Profitability Analysis segment ID (EKBN-PAOBJNR) and the Functional Location field (EKBN-FKBER) is left blank.
Previously, the PA Seg ID has been blank and the Functional Location fields has always contained a value.
This COPA link issue is causing havoc in our Receiving department and I can not find if there was a configurator's transport that caused it (no is fessing up to anything), or if a customer in the MM system set some type of flag -or- is some G/L Account was set up incorrectly that is causing a link to COPA when the PR eventually gets received into inventory.
Help.

I have checked the KEI2 before and for our Assignment 30 we have "Other Costs", and in the "Source" for the Assignment Lines for #30, we have defined a Group (OTHERCOSTS).
This group or set contains the Cost elements which we now have to add to, every time we come across a new cost element or G/L account that is assigned to a PO with line items of Account Assignment Category "F".
The problem is that approximately 3 weeks ago if a PO was created with type "F" line items and the G/L account (cost element) in the Account Assignment portion of the PO was not one that was in the OTHERCOSTS Group/Set ... we had no problem doing the Goods Receipt of the PO -AND- a PA segment was created as well.
For now, we are just adding any new Cost elements to our OTHERCOSTS set if the need arises.

Updating to signed JARs causes problems for older Java versions?

Bear with me on this one -- not a Java developer, but an end user of Java products looking for a little clarification.
We use a product which delivers a Java application via JAR file / web to end users (GlobalScape's EFT server). With the recent release of Java 7 Update 51, users have been running into issues running these JAR files as they are not properly "signed". We're working with the vendor to get updated signed JAR files in place, but they've warned us that these new JAR files will cause errors (or maybe not work at all) on folks who aren't running Java 7 Update 51.
Trying to wrap my head around why that might be. Best theory I can come up with from perusing threads here along with the Java team blogs is that the new security attributes used in the updated JAR files aren't "trusted" by older versions of Java (prior to Update 51?).
We're pushing our vendor for clarification, but curious if someone here could help explain.
Thanks!

I suspect the problem with 'new JAR files will cause errors' is mainly because the vendor keeps enhancing their product, and may not any more support older JREs, or the new jars are no more compatible For example, we build our product on JDK 1.5 ... as some users out there must use that one because the 'newer and better' release does not work for them.
But so far, we have not seen any problems running the 'JRE 7 Compliant' applications on older releases ... provided you can make your application run on latest JRE 7.
In most cases, one can simply remove the previous signature, add (now required) attributes, and sign the same jar again.
But I have yet to find a vendor that would simply add attributes to some older release and re-sign those. Perhaps they can't repeat the build / QA cycle, and would not 'trust' the re-signed jars.
Our curse are signed Cryptographic Provider jars.
Those must be signed by certificates rooted by Sun/Oracle, and adding attributes invalidates that signature - we can re-sign them, but then they won't work. In our case, we are stuck with 5+ year old Bouncy Castle jars, and it does not help us that their 'current' jars are signed with attributes - they are completely incompatible..
IMHO, Oracle failed to think this all thru - or does not care.

Print Preferences handled differently in Windows 7 than XP causing problems for customer locations

Customers use web based application that they run only in Internet Explorer (both 8 or 9). Many of them have a label printer and a report printer attached to the same computer. In Windows XP this was not a problem. But with Windows 7 you
can designate the printer you want to print to from the application but Internet Explorer uses the print preferences for the default printer no matter which printer you choose. Obviously this causes a problem due to the different sizes of paper on the
two printers.
Any ideas for a solution or work around? Having all customers go back to Windows XP is not an option!

Sorry it has taken me so long to respond. Printer drivers for Windows 7 have been installed correctly. It doesn't matter what brand printers are involved. The label printer is the one that has the smaller page size obviously -- brand can
be Cognitive, Godex or Zebra. All respond the same way. If you have the 8 1/2 x 11 printer set to the default printer but you want to print to the label printer about 5 or 6 labels spit out because it is trying to print 8 1/2 x 11 instead of 2.0
x 2.4. It works the opposite way if the label printer is set to the default. If you have the label printer set to the default it will print a tiny report on an 8 1/2 x 11 sheet of paper on the report printer. In this example it is a Canon,
but it doesn't matter what brand the report/invoice printer is. Keep in mind this is choosing the printer from Internet Explorer that you want to print to and even confirming that the printer preferences show correctly from the printer dialogue window
in IE. This is using IE9 but it happens in 8 as well. It DOES NOT happen in Microsoft Word, Chrome or Mozilla. I just sent a 2.0 x 2.4 Word document to the label printer when the default printer was set to the Canon and it print just fine.
I also sent a regular size document to the Canon with the label printer (RT200) set as the default. It also printed normal size. A person should be be able to attach 2 printers to a computer and print to either one from Internet Explorer
and have it use the print preferences assigned to their chosen printer regardless of whether it is set as the default or not. We developed our web-based application to use Internet Explorer so there are other issues that keep us from using another browser
--our customers are told that we only support IE, but if this doesn't get resolved we might have to change that.
Thank you for any help you are able to provide.

HW acceleration (direct2d) causes problems for my site , is there a script to disable it automatically?

Similar Messages

Maybe you are looking for