Hw do I fix this error "Script:resource://gre//modules/services-sync/engines/prefs.js:219?

I have a Mac and I get this error when I m trying to adjust setting to print to a Dymo 450 turbo Labelwriter.
Usually (but not always) when I click on the continue button it totally freezes everything and I have to force quit Firefox

Please update to version 20 to see if it has any difference. If no difference, try a reset.
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

Similar Messages

What precise steps do I take to STOP this annoying 'unresponsive script' freezing of computer; error message: "resource://gre/modules/XPCOMUtils.jsm:329"

When computer is first turned on, and after Firefox is launched, the screen freezes. It continues to remain unresponsive to any mouse clicks or keyboard actions. After 10 to 20 minutes error message pops up:
Unresponsive script: resource://gre/modules/XPCOMUtils.jsm:329
followed by 2 choices (buttons): wait for script to finish running or stop the script.
This is an enormous waste of time and highly frustrating.
If you answer this question or provide a solution, kindly do not use technical or vague terms like "check if there's a problem with the hardware accelerator or with add-on or extensions". That's too general and I can't follow up. It's a bit like saying "go cook a meal". Instead, I'd appreciate if you give precise instructions, steps 1, step 2, step 3 and so on. Thank you.
THANK YOU VERY MUCH IF YOU PROVIDE A SOLUTION!!

any difference between Cached Web Content and browsing history and cokkies?
Old Toad wrote:
I'm able to access the Vistaprint home page with FF 24 without a problem. Install FF 24 and give it another go. First try clearing Firefox's cache via its Advanced preference pane and reload the site.
OT

Bookmark restore problem: " A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete. script: resource://gre/modules/PlacesUtils.jsm:1436"

I'm trying to restore bookmarks from a .json file (as xmarks keeps duplicating and corrupting my list) and Firefox often works really slowly also. I know this as I ususally get a script message errors and option to continue or stop.. In this case with restoring bookmarks everytime I try to restore with my saved .json file I get an interruption, and the message " A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete. script: resource://gre/modules/PlacesUtils.jsm:1436" i stop the script (if i continue the same warning comes up) and then get half of my bookmarks restored or similar only if that, and another message telling me FF is unable to process the bookmarks!? I think this unresponsive script is the one that randomly comes up when I'm working FF hard, and causes it to run slowly- or it is a very similar looking message. Any comments and ideas appreciated .
Running on Macbook pro 2GHz Intel Core 2Duo, 2Gb 667 Mhz DDR2 OS 10.6.8

One other thing....the same script error on Ubuntu Linux 11.10 on my old Dell. And it seems that the backup I thought I had made probably was saved incorrectly, again only half of the bookmarks I had sorted out were created in the file- i should have exported a copy as another safeguard!

Are "Script: resource://gre/modules/XPIProvider.jsm " the result of an upgrade bug in FF?

I was getting similar "unresponsive script" messages in a laptop running Win 8 and the recommended fixes didn't work so I took to using a PC with Xp, which worked fine until recent FF upgrades. The only other fix I've tried is adding FB Phishing Protector which hasn't cured the problem.
FF v. 23.0
Error message: Script: resource://gre/modules/XPIProvider.jsm -> jar:file:///C:/Documents%20and%20Settings/Owner/Application%20Data/Mozilla/Firefox/Profiles/pbo63226.default/extensions/%7Bd10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d%7D.xpi!/bootstrap.js -> jar:file:///C:/Documents%20and%20Settings/Owner/Application%20Data/Mozilla/Firefox/Profiles/pbo63226.default/extensions/%7Bd10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d%7D.xpi!/lib/contentPolicy.js:415

Based on a web search, {d10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d} identifies AdBlock Plus. You can compare the more friendly names of extensions with their alphanumeric identifiers on this page:
Help > Troubleshooting Information
It would be in the second table, under the Extensions heading.
If there's a problem with AdBlock Plus in Firefox 23, then lots of people are going to have it. Can you check for an update?
orange Firefox button (or Tools menu) > Add-ons > "gear" button > "Check for Updates"

Warning: Unresponsive script Script resource://gre/modules/xpcomutils.jsm:198

When starting up Firefox get my users get Warning unresponsive script
A script on this page may be busy or or it may have stopped responding this is on the en-US/firefox/4.01/whatsnew
Script: resouce//gre/modules/XPCOMUtils.js

Such errors with internal Firefox files as the cause are usually caused by extensions that are misbehaving or (incompatible) extensions that are forced to load.
*resource:///modules/XPCOMUtils.jsm
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode

Why does Thunderbird keep displaying Unresponsive Script resource://gre/modules/XPCOMUtils.jsm:323?

Thunderbird keeps hanging and displaying "a script on the page may be busy..." with the above message. I thought that the latest update would fix the problem but it seems to have made it worse. My system is W7 64BitUltimate with SP1. It has 8GB of RAM.
What could be the problem?
Application Basics
Name: Thunderbird
Version: 24.5.0
User Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:24.0) Gecko/20100101 Thunderbird/24.5.0

Script errors are sometimes caused by anti-virus programs keeping the system "busy" by scanning mail folders. Do you have a product such as McAfee operating on the mail folders?

I get this when I close Private Session - "Script: resource://gre/res/hiddenWindow.html:12" What is happening here?

I get a an error when closing Private Session. The screen displays this: Script: resource://gre/res/hiddenWindow.html:12. Then asks if I want a script to stop or continue. Any help out there on this. This is just been recently, the last week maybe.
== This happened ==
Every time Firefox opened

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

I keep receiving this error every time I open LR, "Lightroom encountered and error when reading from its preview cache and needs to quit" and the app won't open. It said LR would try and fix this error next time I opened it but the error remains. I tried

I keep receiving this error every time I open LR, "Lightroom encountered and error when reading from its preview cache and needs to quit" and the app won't open. It said LR would try and fix this error next time I opened it but the error remains. I tried uninstalled and installing the app and the error remains. I have windows 8. Can anyone please help???

Use Windows Explorer to open the folder containing your catalog. The normal location is Pictures\Lightroom. Locate a folder with the extension .lrdata and delete that folder. Then you should be able to start Lightroom again, and Lightroom will begin building and new previews folder. Do not delete anything else.

Lightroom crashes at start up with the error message "Lightroom encountered an error when reading from its preview cache and needs to quit". Please advise on how to fix this error. Thanks

Lightroom crashes at start up with the error message "Lightroom encountered an error when reading from its preview cache and needs to quit". Please advise on how to fix this error. Thanks

You probably need to delete your preview cache. See here
Why And How To Clear Your Lightroom Cache - Lightroom Fanatic
Preference and other file locations in Lightroom 5

When i tried to update my apps in the app store, i coudn't update because of particular error is irritating me whenever i try to update..[There was an error in the app store please try again later.(20)] Any one suggest me to fix this error soon.

When i tried to update my apps in the app store, i coudn't update because of particular error is irritating me whenever i try to update..[There was an error in the app store please try again later.(20)] Any one suggest me how to fix this error soon.

Yea i deleted all the apps which was purchased earlier with old Apple id ..and nw i installed all apps with my new apple id...Tanq for helping guys (Linc Davis and Dah•veed ).

How to fix this error message The backup disk image "/Volumes/AirPort Disk/FARES DEL VALLE's iMac.sparsebundle" could not be accessed (error -1).

how to fix this error message The backup disk image “/Volumes/AirPort Disk/FARES DEL VALLE’s iMac.sparsebundle” could not be accessed (error -1).

The troubleshooting C17 is the specific article.
http://pondini.org/TM/Troubleshooting.html
This is generally a Lion error.. and you will need 5.6 utility to get access to the disk area.
So download the real utility. Run it instead of v6 toy version.
http://support.apple.com/kb/DL1482
Go to the manual setup, disk page and click on disconnect all users.. that will unmount all users connected to the disk and allow it to start working. But there are a number of other issues that are possible cause. Pondini lists some of them.

How to fix this error "this iPad is not able to complete the activation process. Please press Home and start over. If the issue persists, please visit your nearest Apple Store or Authorized service provider for more information or replacement"?

How to fix this error "this iPad is not able to complete the activation process. Please press Home and start over. If the issue persists, please visit your nearest Apple Store or Authorized service provider for more information or replacement"? When I plugged in my iPad this popped up!

Hi csreddy,
If you are receiving a message to contact an Apple Retail Store or Authorized Service Provider for help updating from iOS 3, click on the link below to initiate that support:
Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
http://support.apple.com/en-us/HT204204
Update your device using iTunes
If you can’t update wirelessly, or if you want to update with iTunes, follow these steps:
Install the latest version of iTunes on your computer.
Plug in your device to your computer.
In iTunes, select your device.
In the Summary pane, click Check for Update.
Click Download and Update.
If you don't have enough free space to update using iTunes, you'll need to delete content manually from your device.
Find out what to do if you get other error messages while updating your device.
Last Modified: Jan 12, 2015
Apple - Find Locations
https://locate.apple.com
Contact Apple for support and service - Apple Support
http://support.apple.com/en-us/HT201232
Regards,
- Judy

Can someone tell me how to fix this error in 10.4.11 on a G5 Quad Core 2.5GHz Tower...A valid video device could not be found for playback. [-70017]

Can someone tell me how to fix this error in 10.4.11 on a G5 Quad Core 2.5GHz Tower...A valid video device could not be found for playback. [-70017]

That's an error reported from DVD Player I believe...
kDVDErrorMissingGraphicsDevice = -70017, // A valid graphics device is not available.
There's some conjecture it has to do with HDCP, or Video Card problems, but the only 2 cures/fixes I found were Software related, one was cured by updating the OS, another by replacing the Video kexts.
I think this error also shows up if trying to use DVD player in Safe Mode, (too much research isn't good! ).
At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware>Graphics/Displays and report like this...
NVIDIA GeForce 7800GT:
Chipset Model:          GeForce 7800GT
Type:          Display
Bus:          PCI
Slot:          SLOT-1
VRAM (Total):          256 MB
Vendor:          nVIDIA (0x10de)
Device ID:          0x0092
Revision ID:          0x00a1
ROM Revision:          2152.2
Displays:
VGA Display:
Resolution:          1920 x 1080 @ 60 Hz
Depth:          32-bit Color
Core Image:          Supported
Main Display:          Yes
Mirror:          Off
Online:          Yes
Quartz Extreme:          Supported
Display:
Status:          No display connected
Can't think of much to try at the moment, but perhaps reapplying the big 10.4.11 combo, Repair Permissions, & reboot would help, not sure.
The combo update for PowerPC-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateppc.html

How do I fix this error message??

How do I fix this error message
"This message could not be delivered and will remain in your Outbox until it can be delivered.
The SMTP server "smtp.mac.com" doesn't support TLS (SSL) on port 25. Please check your account settings and try again."
ThANK YOU!!!
Rich

Mail Help has some articles devoted to sending problems, e.g. “I can't send email” or “I can't send email because the connection to the server on port 25 timed out”. You may want to take a look at them in case there is something there that applies to you.
Something that usually works if you’re trying to use an outgoing (SMTP) server different from the one provided by your ISP (and in the case of .Mac in particular) is changing the outgoing server port to 587 instead of 25 in Preferences > Accounts > Account Information > Outgoing Server Settings.

Do you have any idea, what makes to fix this error in creating PO.

The error is u201CDocument 101600 does not existu201D
Do you have any idea, what makes to fix this error in creating PO.The error is u201CDocument 101600 does not existu201D Here the 101600 is PO no.

Hi
Please check in t.code: RZ20 .
You can find out the nature of this error
Regards
G.Ganesh Kumar

Hw do I fix this error "Script:resource://gre//modules/services-sync/engines/prefs.js:219?

Similar Messages

Maybe you are looking for