Hw to use vrfy function in UTL SMTP
hw to use function below--
FUNCTION vrfy(c IN OUT NOCOPY connection,
recipient IN VARCHAR2) RETURN reply;
i want to check if senders address i m sending is right or not means exists on server or not
sample code---
declare
vs_errordesc varchar2(4000);
vs_conn UTL_SMTP.connection;
reply varchar2(1000);
begin
vs_conn := UTL_SMTP.open_connection (xyz.com',25);
UTL_SMTP.helo (vs_conn,'xyz.com');
UTL_SMTP.VRFY (vs_conn,'[email protected]') ;
dbms_output.put_line (reply);
exception when others then
vs_errordesc :=sqlerrm;
dbms_output.put_line (vs_errordesc);
end;
i want to check whts reply hw can i check it?
i m getting error here
--UTL_SMTP.VRFY (vs_conn,'[email protected]') ;
can u anyone help
The VRFY command is basically useless.. had a good intent, but no practical way to do it accurately and correctly, nor does it serve any real purpose.
Some servers (especially older SMTP version) will simply parse the e-mail address and check if the format is correct. E.g.
-> VRFY [email protected]
<- 252 <[email protected]>
Newer servers will return a 502, meaning that the command is not implemented. E.g.
-> VRFY [email protected]
<- 502 smtp.domain.com: Command not implemente
The reason for this is that in the vast majority of times, the SMTP server you are talking to does not own the address of the recipient. You usually send e-mail to someone in another domain, via your domain's SMTP server.
How can your domain's SMTP server verify the recipient's address when it belongs to another domain? And what can it check? The domain name? How and why? It is not as simple as it sound.
When you deliver an e-mail to recipient on the same domain, the VRFY also does not make sense. Why waste a round trip on that command? If VRFY says okay, you still need to send the address via the RCPT TO command. So simply send a RCPT TO command and have the server telling you yea or nae - a single round trip dealing with the recipient's address.
Similar Messages
-
Hw can i use vrfy command in UTL SMTP or link LDAP with pl/sql
i m using utl smtp to send email from oracle and
i giving sender email address and receiver email address
but when i m sending email from oracle if receivers address is within domain the
then code will just give me error that undeliverable and sender will be system administer as auto mail as we always get and i m getting unable to replay if address is outside domain
now i want to check if my sender email address is exists or not then hw can i check it bcause vrfy command is not useful and and some 1 told me to use rcpt to command i m getting undelivered mail in that case but unable to catch exception
case here is that look up for email address from pl/sql on server?and what if sender is rediff or yahoo mean outside domain
can anyone guide me?when you execute the program it would error out if the sender\recipient address is not available in the server.
Regards,
Bhagat -
Can i send cloab data from UTL SMTP WRITE RAW DATA?
hi
here is my code to send email from oracle as attachment using demomail package provided by oracle----
create or replace procedure html_mail(
p_sender varchar2, -- sender, example: 'Me <[email protected]>'
p_recipients varchar2, -- recipients, example: 'Someone <[email protected]>'
p_subject varchar2, -- subject
p_text varchar2, -- text
p_filename varchar2, -- name of html file
p_blob blob -- html file
) is
conn utl_smtp.connection;
i number;
len number;
BEGIN
conn := demo_mail.begin_mail(
sender => p_sender,
recipients => p_recipients,
subject => p_subject,
mime_type => demo_mail.MULTIPART_MIME_TYPE);
demo_mail.begin_attachment(
conn => conn,
mime_type => 'application/csv',
inline => TRUE,
filename => p_filename,
transfer_enc => 'base64');
-- split the Base64 encoded attachment into multiple lines
i := 1;
len := DBMS_LOB.getLength(p_blob);
WHILE (i < len) LOOP
IF(i + demo_mail.MAX_BASE64_LINE_WIDTH < len)THEN
UTL_SMTP.Write_Raw_Data (conn
, UTL_ENCODE.Base64_Encode(
DBMS_LOB.Substr(p_blob, demo_mail.MAX_BASE64_LINE_WIDTH, i)));
ELSE
UTL_SMTP.Write_Raw_Data (conn
, UTL_ENCODE.Base64_Encode(
DBMS_LOB.Substr(p_blob, (len - i)+1, i)));
END IF;
UTL_SMTP.Write_Data(conn, UTL_TCP.CRLF);
i := i + demo_mail.MAX_BASE64_LINE_WIDTH;
END LOOP;
demo_mail.end_attachment(conn => conn);
demo_mail.attach_text(
conn => conn,
data => p_text,
mime_type => 'text/csv');
demo_mail.end_mail( conn => conn );
END;
Above i m using
p_blob blob -----to send message as attachment now i have table containg data into clob format nw if i send it as it is just changing coulmn from Pblob--- Clob
then it gives me error at UTL SMTP WRITE RAW DATA...
for that i do wrkaround as i m taking data from table as clob convert it to blob and
send as attachment ...
can any one guide me little that is this approcah proper?do i really need to convert data from clob to blob?
bcause in 10g Mail UTL_MAIL raw attachment i have limitation on size of email.attachment........> still no email comes. No error as well.
SMTP itself is straight forward. It is a delivery protocol. And very easy to implement. Which is what UTL_SMTP does - without bugs or errors (none to my knowledge and experience using UTL_SMTP extensively for a long time now).
The problems experience are 50% of the time, incorrectly using SMTP. The other 50% of the time, incorrectly constructing a Mime Internet Message Body for SMTP to deliver. Both are issues that the caller (app code using UTL_SMTP) needs to address.
As UTL_SMTP is program-driven, it is not that easy to play with and debug the conversation with the SMTP server - and figure out just what the SMTP server expects, not like, disallows, etc.
In order to make sure that you are having a proper/valid conversation with the SMTP server, do it interactively using a telnet session on the Oracle server platform. All you do with telnet is to send the very same PL/SQL coded SMTP commands and parameters to the SMTP server - but interactively.
E.g.
/home/billy> telnet mail 25
Trying 165.143.128.194...
Connected to mail
Escape character is '^]'.
220 mail Tue, 13 May 2008 11:20:59 +0200
HELO 10.251.93.58
250 mail: Hello [10.251.93.58]
MAIL FROM:<[email protected]>
250 <[email protected]>: Sender Ok
RCPT TO:<[email protected]>
250 <[email protected]>: Recipient Ok
DATA
354 mail: Send data now. Terminate with "."
Subject: Test Message
This is a test e-mail.
250 mail: Message accepted for delivery
QUIT
221 mail closing connection. Goodbye!
Connection closed by foreign host.
/home/billy>
Simply substitute the SMTP parameters you use in your PL/SQL calls to UTL_SMTP above. And use the same SMTP command sequence as you do in your code.
Note that in the above case, the SMTP server quite happily accepted incorrect and undeliverable sender and recipient addresses. Which means that the e-mail will wind up in the Big Bit Bucket In The Sky. No errors. -
Can not use TOUCH function on Nokia 6600 slide
Can not use TOUCH function on Nokia 6600 slide-
turned on sensor in phone settings, but when i touch the PHONE it does not work.
Please, tell me how use this function or maybe my phone is out of orderAs long as your Sensor Settings are On within Menu, Settings, Phone, Sensor Settings then you just need to do the following -
Tapping
The tap function allows you to quickly
mute and reject calls and alarm tones, and
to display a clock just by double-tapping
the back or front of the phone when the
slide is closed.
Select Menu > Settings > Phone >
Sensor settings to activate the tap
function and vibration feedback.
Mute calls or alarms
Double-tap the phone.
Reject a call or snooze an alarm after
muting it
Double-tap the phone again.
Display the clock
Double-tap the phone.
(If you have missed calls or received new
messages, you must view them before you
can see the clock.)
Simply, if you double tap the screen when the slide is closed and you can see the clock appear then it is working.
I hope this makes it clearer for you.
Full Manual here - http://nds1.nokia.com/phones/files/guides/Nokia_6600_slide_UG_en.pdf -
Can we use replace function in bursting control file?
Hi All,
Greetings!!!!!!!!!!
Have a doubt can we use sql functions like replace,nvl,decode.. in xml bursting control file.
Please let me know if there is a option.
awaiting reply...
Thanks
RajeshIn Expression operator or in Filter, etc. you can type function name by hand.
Oleg -
Can we use Evaluate function in Prompt
Hi all
Can we use Evaluate Function in Dashboard Prompt?
I need some exposure on how to use it.
I am working on a HRMS-OLTP Source where I need to work with Oracle Functions from OBIEE.
IF somebody can tell me that, It will be a favour for me....
ThanQ
Anand VHi All,
Here's an example of how to use evaluate. This use calls the Oracle TO_DATE function: EVALUATE('TO_DATE(%1,%2)' as DATE, '03/03/2009', 'MM/DD/YYYY')
Here's how it works: EVALUATE( '<FUNC>' AS <DATATYPE>, VALUE1,VALUE2,etc)
FUNC) Is the syntax for the function you are calling. Any parameters have to be replaced by %<number>, where number refers to the order in which you specify your parameters.
DATATYPE) The datatype that the function will evaluate to. In this case, DATE.
VALUE1) The latter part of the formula is a comma separated list of all the parameters used in the function. In this case, it's the date I want to cast
VALUE2) This is the second parameter. You need as many as you referenced in your function. In this case, it's the date format.
Good luck and if you found this post useful, please award points!
Best regards,
-Joe -
Can we use Evaluate Function in Dashboard Prompt
Hi
Can anybody tell me
Can we use Evaluate Function in Dashboard Prompt.
If yes...How
Thanks in AdvYes ! You Can!
while creating the dashboard prompt, under "Show" pick SQL results and you write the SQL statement and include the EVALUATE function.
I have several such examples. Most of of dashboard pages are parameter driven.
1. 1st paratmeter - users specify the dates
2. 2nd parameter - constrains the results for the period specified in 1st paramter and my SQL for 2nd paramter looks like this -
SELECT table1.column1
FROM table, datedim1, table1,table2
WHERE datedim1.date BETWEEN EVALUATE( 'TO_DATE(%1,%2)','@{presentation variable1}','dd/mm/yyyy') AND EVALUATE('TO_DATE(%1,%2)', '@{presentation variable 2}','dd/mm/yyyy')
HTH
Mahesh -
Can we use SOUNDEX function in OWB?
Hi
Can we use SOUNDEX function in OWB. If yes then how?
Regards
VibhutiIn Expression operator or in Filter, etc. you can type function name by hand.
Oleg -
Convert smartform output in to PDF using CONVERT_OTF function how to do it
Hi Anil , and Hi All
I am trying to display smartforms output in java webdynpro
for that i have got the following code in sdn.
can anybody please clarify these doubts in the below code
1) What are the mandatory input and output parameters
I have to pass here in this code to my application
2) please check my previous post also in this regards please
. Please reply at the very earliest. Check the below code
Convert smartform output in to PDF using CONVERT_OTF function module and you can write pdf using parameter 'binfile' of this function in WebDynpro using the following code:
It is copied from my prg. I hope you understand it.
public void onActionGetQuote(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
//@@begin onActionGetQuote(ServerEvent)
wdThis.wdGetOppt_QwriterCustController().executeZquote_Writer_Input();
String fileName = wdContext.currentZquote_Writer_InputElement().getOrder().toString().trim() + System.currentTimeMillis() + ".pdf";
String pdfOutput = new String(wdContext.currentOutputElement().getBinfile());
if (pdfOutput != null)
try
String pdfResoucePath = WDURLGenerator.getResourcePath(wdComponentAPI.getDeployableObjectPart(), fileName);
FileOutputStream fileOutputStream = new FileOutputStream(new File(pdfResoucePath));
PrintStream ps = new PrintStream(fileOutputStream);
ps.print(pdfOutput);
ps.close();
//Display the PDF to the browser
String fileURL = WDURLGenerator.getAbsoluteWebResourceURL(wdComponentAPI.getDeployableObjectPart(), fileName);
IWDWindow window = wdComponentAPI.getWindowManager().createExternalWindow(fileURL, "Pdf Browser", false);
window.removeWindowFeature(WDWindowFeature.ADDRESS_BAR);
window.removeWindowFeature(WDWindowFeature.MENU_BAR);
window.removeWindowFeature(WDWindowFeature.STATUS_BAR);
window.removeWindowFeature(WDWindowFeature.TOOL_BAR);
window.open();
// To collect all the file created in the server by user
quoteFiles.add(quoteFiles.size(), pdfResoucePath);
} catch (Exception e)
throw new WDRuntimeException(e);
//@@endHi
ABAPers prepared a BAPI function module which calls Smart form , how can i execute it from java Webdynpro, so that I can display the smart form in Webdynpro. Pleas reply at the very earliest. Every answer will be rewarded.
regards
jalandhar -
Hi,
we have FR Studio (client, v. 11.1.1.3.0238 and Report Server v. 11.1.1.3.0.0301) distributed on Citrix terminal server (windows 2003 32-bit) and on latest 2 prod servers we have this error "You're not authorized to use this function. Contact your administrator." appearing.
On QA server FR Studio works fine, we had an issue there when we forgot to set ports
8295-8299 to "listening mode" = they were not defined on FR server's FR_servp.properties config files.
This is also fixed on Prod FR servers and we have double checked firewalls are open.
After adding them to QA FR servers we had no issues with FR Studio on QA, but on PROD the issue still exists.
We have also checked that this shouldn' have anything to do with authentication.
Odd thing is that we get at least partially same sort of error messages on both working and non-working FRClient.log files.
On FRClient.log there are for example following records:
08-04 09:26:11 ERROR ConfigResourceBundle Could not find fr_configcache.properties file
08-04 09:26:11 ERROR SerializableResourceBundle Could not get registry instance
08-04 09:26:11 ERROR SerializableResourceBundle java.io.FileNotFoundException: C:\Apps\Hyperion\common\config\9.5.0.0\reg.properties (The system cannot find the file specified)
com.hyperion.hit.registry.exceptions.RegistryException: java.io.FileNotFoundException: C:\Apps\Hyperion\common\config\9.5.0.0\reg.properties (The system cannot find the file specified)
at com.hyperion.hit.registry.RegistryUtils.createNewConnection(RegistryUtils.java:158)
at com.hyperion.hit.registry.RegistryConnection.getInstance(RegistryConnection.java:155)
at com.hyperion.hit.registry.Registry.getInstance(Registry.java:309).....
Caused by: java.io.FileNotFoundException: C:\Apps\Hyperion\common\config\9.5.0.0\reg.properties (The system cannot find the file specified)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at com.hyperion.hit.registry.RegistryUtils.createNewConnection(RegistryUtils.java:151)
... 15 more
08-04 09:26:11 ERROR HRResourceBundleFactory Could not locate registry
08-04 09:26:11 ERROR HRResourceBundleFactory 5500
com.hyperion.reporting.util.HyperionReportException: Server not yet configured. Please configure the server.
at com.hyperion.reporting.config.ConfigResourceBundle.<init>(Unknown Source)
at com.hyperion.reporting.config.ConfigResourceBundle.getInstance(Unknown Source)
at com.hyperion.reporting.config.HRResourceBundleFactory.getConfigBundle(Unknown Source)...
That propably gives already an idea what FR Studio is logging.
Does anyone have idea about this .properties file for frconfig cache?
Should that be defined somehow during system configuration as we don't find that from any of our environments?
Just for additional info:
We have used following packages and installed HFM Admin Client, FR Studio and EPMA File Generator GUI.
• 02. installer - V17382-01.zip
• 03. foundation 1 of 4 - V17397-01.zip
• 03. foundation 2 of 4 - V17369-01.zip
• 04. architect - V17398-01.zip
• 08. financial reporting - V17378-01.zip
• 11. financial management - V17365-01.zip
Patches:
+ hfm_11113_50-p9976978_111130_WINNT.zip
+ financial reporting_11113_20-p9657652_11113_WINNT.zip
During the installation we selected:
Foundation \
Performance Management Architect\Performance Management Architect File Generator
Financial Management\
Financial Management Client
Financial ManagementADM Driver
Financial Reporting\
Financial Reporting Studio Client
I noticed that apparently no configuration was run neither in QA or in PROD, not sure though if FR Studio even requires that? HFM Admin Client does work on all environments Citrix servers.
But in Dev and LAB where FR Studio is working fine - FRClient logs absolutely no recods at all and there we did run configuration to tell which SQL db is on background.
Not sure though whether that config run has any significance for FR Studio.
Sorry for extremely long story, but just in case if anybody has faced similar issues and whether there could be something with Windows server settings I should go and check?
Btw... even adding this fr_configcache.properties manually (to try to highlight FR server name and port) it seems FR Client can't find the file.
Br, MJKDenis,
Thank you for the prompt reply.
>
Denis Konovalov wrote:
> if those reports were saved with security - you're not goingt o be able to open them with Xi3.1 Deski.
Forgive me for my mundane question but what does saving with security mean?
Thanks -
I am going to run tests that require an actuator to move using various types of arbitrary waveforms such as sine or square. The NI 7344 is hooked to the UMI that is going through a driver for a servo valve. The loop is analog and it is closed. I have played with some of the examples but can't get it to work. I have used the function generator VI to generate a signal but I think I am using the wrong input VI to the motion control board. When I use what I have it moves the servo and then stops. It doesn't continually generate the signal.
I would love to use the controls on the function generator vi to control frequency and amplitude ect. Any help or pointer would be helpful. Thank you in advance.Hello,
I'm not clear on exactly how you want to use the generated data but I'm assuming they will be used as your target points.
There's a built-in example for motion called 'One-Axis Contour Move.vi'. This example demonstrates how to provide your target points as 1-D array. All you need to do is to replace the input array with the output of the function generator. In order to have it run continuously, use a while loop. You can further program your application so that it'll change the waveform on the fly by monitoring the user interface but this might be little little tricky as you will need to reset the move and load the new generated points while keeping track of your current position.
I hope this helps. Let me know if you have further questions regarding this
application.
Best regards,
Yusuf C.
Applications Engineering
National Instruments -
How to use read_text function module
Hi how to use read_text function module to read purchase order header text .what are all tht things to pass in ID,Name and Object
thanks,
MaheDear,
Use below code.
DATA:IT_LINE LIKE TLINE OCCURS 0 WITH HEADER LINE,
V_TDNAME LIKE THEAD-TDNAME.
V_TDNAME = PO_NUMBER.
CALL FUNCTION 'READ_TEXT'
EXPORTING
* CLIENT = SY-MANDT
ID = 'F01'
LANGUAGE = 'EN'
NAME = V_TDNAME
OBJECT = 'EKKO'
TABLES
LINES = IT_LINE.
Thanks and Regards, -
How to avoid use of function module in case of background jobs?
Hi ,
I am working a file tranfer interface .Functionality is to extract file either apllication or presentation server , and process the file through bapi , send the result in their respective server. This program should run through batch jobs in background mode.
I am using following function module :
SUBST_GET_FILE_LIS : Get the file list from application server
TMP_GUI_DIRECTORY_LIST_FILES : Get the file list from presentation server
GUI_UPLOad : to extract file data from presentation server
GUI_downLOAD : to download data to presentation server
in case of background job these function modules will not work.... so how to resolve this issue...
what are the methods we can apply?
Thanks & Regards
SandeepHi,
This FM is used to get list of files from Application server (will work in Background). This cannot be used to list files from presentation server. There is no way , by which you can process presentation server files in background mode.
Regards
Vinod -
How can i use reuse_alv_fieldcatalog_merge function module
I am using below steps for populating the final internal table.How can I use reuse_alv_fieldcatalog_merge function module in the place of declaring all these fields.How canI put title of the report in reuse_alv_fieldcatalog_merge function module.
FORM BUILD_FIELDCATALOG .
FIELDCAT-TABNAME = 'IT_FINAL'.
FIELDCAT-FIELDNAME = 'KUNNR'.
FIELDCAT-SELTEXT_M = 'Customer Name'.
FIELDCAT-JUST = 'L'.
FIELDCAT-KEY = 'X'.
FIELDCAT-DATATYPE = 'C'.
APPEND FIELDCAT TO I_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_FINAL'.
FIELDCAT-FIELDNAME = 'VBELN'.
FIELDCAT-SELTEXT_M = 'Invoice Reference'.
FIELDCAT-JUST = 'L'.
FIELDCAT-KEY = 'X'.
APPEND FIELDCAT TO I_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_FINAL'.
FIELDCAT-FIELDNAME = 'VKBUR'.
FIELDCAT-SELTEXT_M = 'Sales Office'.
FIELDCAT-JUST = 'L'.
FIELDCAT-KEY = 'X'.
FIELDCAT-DATATYPE = 'C'.
APPEND FIELDCAT TO I_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_FINAL'.
FIELDCAT-FIELDNAME = 'VKGRP'.
FIELDCAT-SELTEXT_M = 'Sales Person'.
FIELDCAT-JUST = 'L'.
FIELDCAT-KEY = 'X'.
FIELDCAT-DATATYPE = 'C'.
APPEND FIELDCAT TO I_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_FINAL'.
FIELDCAT-FIELDNAME = 'POSNR'.
FIELDCAT-SELTEXT_M = 'Item No'.
FIELDCAT-JUST = 'L'.
FIELDCAT-KEY = 'X'.
APPEND FIELDCAT TO I_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_FIANL'.
FIELDCAT-FIELDNAME = 'ARKTX'.
FIELDCAT-SELTEXT_M = 'Item Description'.
FIELDCAT-JUST = 'L'.
FIELDCAT-DATATYPE = 'C'.
APPEND FIELDCAT TO I_FIELDCAT.
CLEAR FIELDCAT.Hello,
It is very easy to use reuse_alv_fieldcatalog_merge.
You try this it will work.
example
data:
DATA : gv_repid TYPE syrepid VALUE sy-repid . " Report id
PERFORM set_field_catalog USING gst_struct CHANGING lst_fieldcat.
FORM set_field_catalog USING uv_tab TYPE slis_tabname
CHANGING xt_fieldcatalog TYPE slis_t_fieldcat_alv.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = gv_repid
i_internal_tabname = uv_tab
i_inclname = gv_repid
CHANGING
ct_fieldcat = xt_fieldcatalog
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " set_field_catalog_spec -
Creating Report using EPM Functions with Dynamic Filters
Hi All,
I am new to BPC, In BPC 7.5 i seen like we can generate EPM report using EVDRE function very quickly and easy too. Is the same feature is existing in BPC 10.0 ? if no how can we create EPM reports using EPM Functions with Dynamic Filters on the Members of the dimension like in BPC 7.5.
And i searched in SDN, there is no suitable blogs or documents which are related to generation of Reports using EPM Functions. All are described just in simple syntax way. It is not going to be understand for the beginners.
Would you please specify in detail step by step.
Thanks in Advance.
Siva NagarajuSiva,
These functions are not used to create reports per se but rather assist in building reports. For ex, you want to make use of certain property to derive any of the dimension members in one of your axes, you will use EPMMemberProperty. Similary, if you want to override members in any axis, you will make use of EPMDimensionOverride.
Also, EvDRE is not replacement of EPM functions. Rather, you simply create reports using report editor (drag and drop) and then make use of EPM functions to build your report. Forget EvDRE for now.
You can protect your report to not allow users to have that Edit Report enabled for them.
As Vadim rightly pointed out, start building some reports and then ask specific questions.
Hope it clears your doubts.
Maybe you are looking for
-
How I can check in formula field does Source table has rows count more than zero?
I have 2 tables in data set source: tbl_Quote and tbl_Invoice. Report should show an Invoice Number. If an invoice isn't issued yet I want display an Order Number instead of Invoice Number. I'm using a formula field for this purpose. I tried formulas
-
hi, in SD VOV8, we can know what would be the type to use next in delivery and billing. example, some of the activity no delivery, so there is no value under delivery in VOV8. may i know in MM, where i can see the similar? like some of the activity G
-
Has anyone had a problem with the F keys changing functions all by themselves? i.e.: my volume keys make the dashboard come up?....how do I fix this..i've had my macbook for 4 days...no clue
-
Does anybody know something about quadro fx 1800 support fo Premiere cs5 ?
Does anybody know something about quadro fx 1800 support fo Premiere cs5 ? It`s very important to me. Premiere cs 4 supports fx 1800 if you have elemental accelerator. So if you have any information please share. cheers
-
Why do I need Skype To Go #'s?
I have Skype To Go #'s on my account but I do not call Internationally. So why do I have or need Skype To Go #'s?