Hwmon device ordering - problem showing temperature in conky

My conky sometimes refuses to show CPU temerature. That is because it gets it from file "temp1_input" which is normally located in /sys/class/hwmon/hwmon0/ , but sometimes after computer reboot it shows up in /sys/class/hwmon/hwmon1/ . It is evident, that the problem is ordering hwmon devices, which seems to be random. Is there any way to force ordering to be always the same?

That happened to me before; I think the problem was that there were two modules that were being loaded and they weren't always loaded in the same order. I only actually used one, so I blacklisted the other, and then the correct information would always show up in hwmon0. Here's a post from when I was on ubuntu; adjusting for Arch should be straightforward.
http://ubuntuforums.org/showthread.php?t=1610061
Of course, if you need the other module, then this solution won't work.

Similar Messages

  • Yesterday I  reset my settings on my  iphone 4 to correct another problem. Today I am unable to connect to itunes to sync my phone. The device does not show up on the screen. What can I do?

    Yesterday I reset my settings on my iphone 4 to correct a problem. Today I am unable to connect to itunes to sync my phone. The device does not show up on the screen. What can I do?

    Best practices says plug the USB cable into the computer, then plug the 30 pin connector into the iPhone.
    If everything is working correctly, you should be able to plug the iPhone in at any time. Before or after opening iTunes.
    Depending on what settings are selected in iTunes, the program may or may not automatically open when you connect the device.

  • How come whenever i plug my iPhone 5 into the computer the device will not show up on my itunes.  This is the first time that i have done it since i updated to iOS7 and before i had no problem but now it just wont work.

    How come whenever i plug my iPhone 5 into the computer the device will not show up on my itunes.  This is the first time that i have done it since i updated to iOS7 and before i had no problem but now it just wont work.

    Hi Celia51510,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    I can't tell from your post if you are using a Windows or a Mac Computer.
    Try deleting the iTunes application and redownloading the version you need below:
    iTunes 11.1 Download for Mac
    http://support.apple.com/kb/DL1614
    iTunes 11.1 for Windows (64-bit)
    http://support.apple.com/kb/DL1615
    Cheers,
    - Judy

  • On my iPad mini, my inbox number count is over 500 even though the inbox. Is empty. All accounts do this on my iPad but all my other device are fine. Problem showed up two weeks ago???

    On my iPad mini, my inbox number count is over 500 even though the inbox. Is empty. All accounts do this on my iPad but all my other device are fine. Problem showed up two weeks ago???

    Hi Peter,
    Thanks for participating in the Apple Support Communities.
    It sounds like the Mail app on your iPad mini is showing that you have over 500 unread email messages, but your inbox is actually empty.
    There are several steps I'd use to troubleshoot this situation.
    First, restart your iPad to see if it clears up the symtom:
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    Press and hold the Sleep/Wake button until the red slider appears.
    Drag the slider to turn your device completely off.
    After the device turns off, press and hold the Sleep/Wake button again until you see the Apple logo.
    If this doesn't correct the behavior, try removing and re-adding the affected email accounts next:
    Get help with Mail on iPhone, iPad, and iPod touch - Apple Support
    Delete the affected email account from your device.
    Tap Settings > Mail, Contacts, Calendars.
    Tap the affected email account.
    Tap Delete Account.
    Add your account again.
    If the same thing happens after re-adding the account, you may need to use the steps below to reinstall iOS. You may want to back up your iPad to iTunes before completing this step.
    Make sure that you have iTunes 12 or later on your computer.
    Put your device in recovery mode.
    When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
    From:
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    All the best,
    Jeremy

  • My devices are not showing up on my itunes. How do i fix this?

    My devices are not showing up on my itunes to sync. how do i fix this?

    Why is this answer being accepted by users?  Am I supposed to restart my Mac EVERY TIME I want to sync my iPhone, iPad or iPod?
    Has anyone found a solution to this problem?  I see this question in the Apple Support forums quite frequently, and the answer always boils down to 'http://support.apple.com/kb/TS1591' - Which - after exhausting the obvious, you've got a bad cable or bad USB port checklist - recommends that you 'Restart your Mac' to resolve the issue.
    That's not an adequate or acceptable answer - If Apple is ignoring this question, then they're the ones with a 'Problem' - Ignoring these obvious issues (this isn't a bad cable / bad USB port problem) is only going to lead to a loss of customers.  I'm certain that Apple has the technical expertise to investigate and resolve the underlying issue. The real question is 'does Apple still value the customer'?
    My iTunes (11.1.4) has stopped recognizing Devices (an iPad 2, an iPhone 5S, an iPod classic). This has been going on for about a month now (since 11.1.4?). Yes, I have the current OS (OS 10.9.1), yes my iDevice has the most recent iOS (just updated to 7.0.6 (1.1.2 for 160GB iPod Classic), yes my USB 3.0 ports work (after I reboot the computer). The syncing and connectivity works fine (with all my devices/cables/USB ports) until I disconnect my device - What good is my mobile device if I have to leave it tethered to my Mac in order to use it?

  • HT1386 Is Apple not compatible with Windows 8.1? When I open iTunes, my device doesn't show at all.

    When I open iTunes, my device does not show up... connected with USB cable. I'm using a PC with Windows 8.1. Anyone else having this problem? I can't sync wired or wirelessly at all.

    Hello updmom,
    Thanks for using Apple Support Communities.
    I found the following article that will help you in resolving this issue, where your iPhone is not recognized by iTunes.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    If you get to the part where it asks you to uninstall iTunes, be sure to uninstall iTunes and the other components in the order listed.
    Take care,
    Alex H.

  • Devices does not show up in left-hand column

    Ipod nano is connected to USB port and has fully charged. "Devices" doesn't show up in left-hand column.  Library, Store, Genius, and Playlists are listed.  Looked on public forums, but no viable solution displayed.  I welcome suggestions.  Nano was not recognized when used an older cable.  2nd cable worked.
    I think it could be my PC's problem.  It doesn't list the nano in control panel.
    I reset the nano, to no avail. 
    Thanks.Greg

    Welcome to the Apple Community.
    Unless you have any devices it won't show up. The Apple TV is not a device that shows up in the devices list in iTunes, that was the Apple TV 1.

  • I am signed in itunes with me apple id and my iphone /ipad is in the same id but when i go in manage devices its only showing my iphone?

    I am signed into itunes with my id and my iphone / ipad are also on this id but when i go in to manage devices its only showing the iphone. Also just up dated my ipad now its saying not charging when its hooked up to the computer?

    If the problem persists, you'll probably have to make another apple id, it wont take off any games or music or apps or anything you've bought it will all stay there, i have two apple id's and i don't have a problem with anything.

  • Smart Playlist Song Order Problem on iPod Nano 6th G

    recently i got an iPod Nano 6th G after years of using my iPod Classic 5.5G, and so far it has been a bliss actually if it wasnt for one small thing
    i have a somewhat large collection of music that i have - with a few exceptions - put in one big smart playlist with the rules provided in the pic to fit my needs
    on my old iPod Classic when i sync it i find it in the ipod in the same ordered that shows on my iTunes, but with my iPod Nano that is no longer the case.... even the the same playlist in my iPod have the songs in the exact order as it is in my library on iTunes, once i unblug it the play list on iPod becomes arranged alphabetically by artist and obviousely that is my problem
    so if anyone could guid me to correct it or even the cause of it i'ld be very thankful

    Can someone point me to a forum somewhere where I can get help with this? I'm obviously posting to the wrong place. Thanks!

  • My new ipod nano 7th generation will not sync with i tunes, followed all the apple on line trouble shooting ideas, this device will not show up in itunes but i can see it from explorer, windows 7 user.

    ipod nano 7th generation will not sysc with i tunes is updated , device does not show up in itunes under devices but shows itself in explorer.ran diagnostics failed sync. about ready to take this back to best buy.

    yes i have a solution to my problem only because of a recent phone call from apple they were great.......... in the right hand side of itunes my i pod was displayed.  click on the ipod symbol........at the top of the page you will see summary,,,,,,music,,,,,,movies,,,,,,tvshow,,,,,,photo,,,,,on this ipod.
    click on music check mark music done and sync
    problem solved
    thanks apple

  • Problem showing BI report in SAP CRM 7.0

    Problem showing BI report in SAP CRM 7.0
    We are facing a problem in our SAP CRM, when we show a BI report in the fact sheet we can see the report correctly.
    But when we click on the match code of the query, (in order to choose a value from the help) the popup does not appear and we got the error u201Caccess denied     popup_ie6.jsu201D
    Any help?
    Thank you in advance.

    Hi,
    Please check the service patch for BW.
    In our S/m it is working Fine.
    SAP_BW     701     0003     SAPKW70103     SAP Business Warehouse
    BI_CONT     704     0003     SAPK-70403INBICONT     Business Intelligence Content
    Regards,
    Lokesh.

  • Sales Order Status showing  Being Processed

    Hi All ,
    I my client created sales order with 100000.700 ton and with 42 Piratical delivery document with different dates and 42 billing document and clear accounting documents
    But the problem is Sales order status showing as Being Processed
    I check all delivery documents if was showing total quantity delivers and i check copy controls OR to ZLF Updated document flow is there
    and i Item category TAN don't not having completion rule
    My question is it is mandatory to maintain Completion rule in item category
    The Problem With Only One sales order it showing Being Processed, rest of sales document Showing completed
    Do we need to Updated Status manually ?
    Can any one guide me what could be a Problem
    Thanks
    Rajesh

    Hi,
            GO TO VA02 THEN SELECT THE ITEM  THEN GO TO SCHEDULE LINE -> STATUS TAB-> GIVE THE REASON FOR REJECTION
    Regards,
    T.Murugu

  • Install from SCSI CD fails: ERROR: boot device didn't show up after 30

    I have a x86 based server w/SCSI HD and DVD drive. 
    Install fails with following.
    Waiting 30 seconds for device /dev/disk/by-label/ARCH_201108
    ERROR: boot device didn't show up after 30 seconds
       Falling back to interactive prompt
       You can try to fix the problem manually, logout when you are finished
    sh: can't access tty; job contro turned off
    [ramfs /]#
    I hooked up a IDE DVD drive and using same CD installs OK.  Then, once installed, I switch my DVD back to SCSI that failed the install, and guess what?  Arch booted from my HD now recognizes the SCSI DVD drive, I can mount it and so on.  Looks to me like the install kernel doesn't support my SCSI DVD drive but the installed kernel does.
    I need the Arch install to work from the SCSI DVD drive on my system.  I'm trying to develop an Arch distro for my particular system, which there are about a dozen of in the field, they all have SCSI DVD and no IDE drives.  Will I have to add a SCSI driver to the boot kernel?  Or is my problem something else?
    I notice there is no /dev/disk/by-label (ther is a /dev/disk/by-id  by-label  and by-uuid).
    I do a:
    "[ramfs /]# lsmod | grep sr_mod"
    sr_mod        14951   0
    cdrom        36329   1   sr_mod
    scsi_mod    131482   7  sg,sr_mod,sd_mod,libata,mptspi,mptscsih,scsi_transport_spi
    [ramfs /]# lsmod | grep scsi
    mptscsih        20040   1   mptspi
    mptbase            63459    2   mptspi,pmtscsih
    scsi_transport_spi    20059   1   mptspi
    scsi_mod        131482  7   sg,sr_mod,sd_mod,libata,mptspi,mptscsih,scsi_stransport_spi

    scrath "I notice there is no /dev/disk/by-label (ther is a /dev/disk/by-id  by-label  and by-uuid)."
    Should be: I notice there is no /dev/disk/by-label (there is a /dev/disk/by-id  by-path  and by-uuid).

  • Artist sort order problem

    Hi.
    I have music sync'd via iTunes Match from my laptop to my iPad and to my iPhone. The names and order appear correct on both the laptop and on the iPad but on the iPhone several artists are either shown in all lower case or the last name will be used by the sort, rather than the first.
    I've reset the artist, album artist and sort artist tags to different names (and they show up correctly then on the iPhone) and then set them back, but the problem remains.
    I'm thinking that the iPhone has a corrupt file somewhere - but how can I reset that without losing everything on the phone?
    A factory reset and restore from iCloud results in the same problem.
    Any ideas?
    Thanks guys.
    --Cynan.

    I also have an Artist sort order problem. While the circumstances are quite different from yours, I wonder if it's due to a similar corruption problem. I don't use iTunes Match. I found Kenny G listed under letter T.

  • W520: Unable to boot from USB - device does not show up in boot menu

    I have a W520, and I am trying to boot from a USB key. The USB key is bootable, my old T61p boots just fine from it, and so does another computer I tried.
    The W520, after pressing F12 on power on, immediately shows the Intel PXE agent and then some blue boot menu, which only shows hard drive and LAN as available boot options.
    I have tried all three USB ports but the results are always the same - the USB device does not show up. Is there any trick or BIOS setting to enable boot from USB?
    Thanks,
        CS 

    Hello Neil
    Thanks for getting back to me
    The issue was that the usb drives were disabled in the bios from the  Startup menu.
    To enable
    1. Enter bios
    2. Select boot
    3. If you do not see the boot device you require use the down cursor key until the "Excluded from boot priority order" becomes visible.
    4. Select the device you require (in my case USB HDD)
    5. Save and exit.
    You can now boot from a usb stick and install the Linux distro of your choice :-)
    Cheers

Maybe you are looking for

  • Foreign exchange difference

    hi sap gurus I am facing one problem in foreign currency valuation . Company code currency is INR We are issuing sales invoice to one customer in USD for 1000 US$- rate on the date is 50 INR=1 US$. Receivable in INR 50,000.Customer reco acct is in IN

  • Digital Signature Logs in DSAL Tcode

    Hello All, Please help me to solve one issue. I have successfully created the configurations and code to digital check the R/3 User and password of user and accordingly receiving the logs in DSAL tcode also using if_ds_sign-sign method. But issue is

  • Issue in production orders confimations, when any component is modified.

    Hi Experts, I'm facing with the follow situation: - I've created and released one production order - Then, I've changed one component quantity in production order. - Finally, I've tried to confim this order. Does anyone know why this component (wich

  • The Best Virus Program For The Mac?

    Hi... I currently use Virus Barrier X6 w/ Net Barrier... What is the best Virus/Network Software for the Mac platform? Any Recommendations? So far I've had no problems and Virus Barrier did detect one virus which came in the form of a junk email atta

  • 10.3, how to configure cluster as "single Weblogic server"

    Hello, We have a Cluster with Two Managed servers. The ports for the MS's are 7002, 7003. We want deployments for these servers to be visible through port 80/443. Currently we have Mapviewer application deployed and targeted to the cluster. All serve