Hy rotation lock is not checked, why not rotate?

If you see a lock icon in the upper right corner of the screen - then the screen orientation is locked. I think that you are seeing that lock icon.
Try the side switch above the volume rocker first and see if that unlocks the screen. If that doesn't do it, double tap the home button and swipe to the right and look for the lock icon all the way to the left. Unlock it there.
If the screen is unlocked but still will not rotate, reset the iPad.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Similar Messages

When trying to update to 4.0.1 it locks up when checking for updates do plug-in. This causing Firefox not to work. Why?

When trying to update to 4.0.1 it locks up when checking for updates to plug-in. This causing Firefox not to work. Why?
I am running windows 7. I have tryed uninstalling and reinstalling and every time it locks up at the same point, when it is checking for updates to plug-ins. I have run troublt shooting and it tels me :Incompatible Application. Why??

Create a new profile as a test to check if your current profile is causing the problems.
See:
* [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins"
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See:
* http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

My iPad screen won't rotate. The rotation lock is not on and it is out of warranty. What should I do?

My iPad screen won't rotate. The rotation lock is not on and it is out of warranty. I downloaded a gyroscope app and it says that I am always at 0 degrees. What should I do?

Hi,
There are three things you can do.
1) Check the function of the side switch - in the Settings app, under General.
2) Try a reset by holding the on/off and home buttons together until the Apple logo appears.
3) If this fails, take it to an Apple Store.
Hope this helps and Happy Holidays!

Hi. Im currently living in New Zealand. Just bought an iphone 5s yesterday from a shop called Parallel Brand Imports in Auckland. When i came home i called apple to check whether my phone is locked or not and they said that its locked to US Verizon even t

When i came home i called apple to check whether my phone is locked or not and they said that its locked to US Verizon even though when i checked on iphoneimei it said sim status unknown. I put my 2degrees (NZ carrier) in today and it worked fine. I got into the settings and turned off the automatically part of carrier and there were 3 options for me to choose 2degrees vodafone and telecom. Because of that, im quite confused abt whether my phone is locked or not since im from vietnam so i want to know if i can use vietnamese sim card when i go home. Thanks for your help@verizon

Hi tranvietanh - I appreciate you contacting us all the way from New Zealand! I can confirm that the iPhone 5s and all of our other 4G LTE device are not SIM locked. As the carrier in New Zealand may not support the exact same frequencies and cellular bands that we use on our network, we are unable to support the device if using a 3rd party SIM.
Thank you,
YaleK_VZW
Follow us on Twitter @VZWsupport

FM or table to check whether a transaction is locked or not

Hi all.
    I need to create change a return order (VA02 Transaction ) & then need to create a delivery (VL01N Transaction) for this
   return order no. My issue is before creating delivery (VL01n) I need to check whether return order (VA02) is lockked or not in report program. Is there any FM or table for this. Thanks in advance.
Kind Regards,
sami

Hi,
check the below function module to check the return order is locked or not..
      CALL FUNCTION 'ENQUEUE_EVVBAKE'
        EXPORTING
          mode_vbak      = 'E'
          mandt          = sy-mandt
          vbeln          = w_lvbeln "pass return order
          x_vbeln        = ' '
          _scope         = '2'
          _wait          = ' '
          _collect       = ' '
        EXCEPTIONS
          foreign_lock   = 1
          system_failure = 2
          OTHERS         = 3.
      IF sy-subrc NE 0.
" Sales Order is locked
      ENDIF.
Prabhudas

We need to check whether the order is locked or not?

I need to check whether the order is locked or not?
I tried to use this RFC KAUF_ORDER_READ and passed Order no.
I manually locked the order( using Tcode -IW32) but still Function module is not returning 'X' in FIELDS flg_locked and FLG_ENQUE of the structure E_KAUF.
the FM should return 'X' in these fields.
Please help.
Coudl anybody suggest me how I can check using RFC/ Table fields etc that whether the order is locked or not?

Hi Rohit,
Try this code. Check the flag.
Note : Order number should have left padding of Zero
DATA : order_tab TYPE TABLE OF ord_pre,
       wa        TYPE ord_pre,
       flag      TYPE rc27x-flg_sel.
wa-aufnr = '000004006789'. "Order number should have left padding of Zero
APPEND wa TO order_tab.
CALL FUNCTION 'CO_ZF_ORDER_READ'
EXPORTING
   flg_dialog               = ' '
*   FLG_ENQUEUE              = 'X'
*   OBJECTS_IMP              = ' '
*   EXPLODE_IMP              = ' '
*   FLG_PROT_IMP             = ' '
*   FLG_NO_EXTERNAL          = ' '
*   FLG_NO_BANF              =
*   FLG_CHECK_SIM            =
*   IMPORT_MESSAGE_ID        =
*   CHECK_STATUS_READ        = ' '
*   FLG_NO_GOS               = ' '
*   FLG_CALLED_TO_COPY       = ' '
IMPORTING
   flg_enqueue_ok           = flag
*   FLG_ESCAPE               =
TABLES
*   AUFNR_DEL_EXP            =
    aufnr_tab_imp            = order_tab
EXCEPTIONS
   ORDER_NOT_FOUND          = 1
   RELEASE_NO_CHANGE        = 2
   OTHERS                   = 3
IF sy-subrc = 0.
WRITE flag. "If Flag is X order is not locked
ENDIF.
Regards
Rajvansh
Edited by: Rajvansh Ravi on Nov 27, 2008 12:33 PM

I have iPhone 5 IOS 8.1.2; for past 13 weeks I get message that my phone has not backed up on the cloud. Every night however the wifi is on, phone is connected to power, and screen is locked. Any idea why back-up is not happening ?

I have an iPhone 5 IOS 8.1.2;
for the past 13 weeks I get the message that "this phone has not been backed up on the cloud". However, every night it is connected to wifi, phone is connected to power, and the screen is locked. Any idea why back-up is not happening ? By the way, I do not have the "back up now" option in Setting / iCloud.. Help anyone ?

Try deleting an other icloud backup and see if it will automatically backup.

On update to 4.0 Firefox locked up while checking for compatability of applications and will not load.

I have HP a6620f, Vista, 64 bit, 2.5 GHz 4.0 GB RAM. Firefox worked great until I upgraded to 4.0 when it locked up while checking for compatability of applications. I have the desktop ikon but firefox will not come up. Task manager shows firefox.exe using 50% of CPU when terying to come up.

I've since updated manually to 4.0.1, but haven't yet tried the full uninstall version, because I have to export plenty of settings first (and/or manually copy them). Also means I'd have to start from scratch with many customizations in No Script.
That said, I'll try the 'Safe Mode' option tonight, thank you :-)!
If I have to uninstall the whole shebang, I'd be more tempted to go back to 3.6.x until a few more of 4's teething problems (e.g. the messy print dialogues, particularly preview, which regularly doesn't even work) have been tackled.
Thanks-1M! for now - keep you posted.

Locking Mech not working as expected

I wanted to test my own lock object for a custome table 'zemp_master'. I have created a lock object (WRITE LOCK). Now in my main user (SAPUSER) i have written the following program.
REPORT ZLOCK_TEST.
CALL FUNCTION 'ENQUEUE_EZLOCK_1'
EXPORTING
   MODE_ZEMP_MASTER       = 'E'
*   EMPNO                  = ''
*   X_EMPNO                = ' '
*   _SCOPE                 = '2'
*   _WAIT                  = ' '
*   _COLLECT               = ' '
* EXCEPTIONS
*   FOREIGN_LOCK           = 1
*   SYSTEM_FAILURE         = 2
*   OTHERS                 = 3
IF SY-SUBRC <> 0.
MESSAGE 'Lock Not done' TYPE 'I'.
ELSE.
MESSAGE 'Lock done' TYPE 'I'.
ENDIF.
write:/ 'Hello'.
CALL FUNCTION 'DEQUEUE_EZLOCK_1'
* EXPORTING
*   MODE_ZEMP_MASTER       = 'S'
*   EMPNO                  =
*   X_EMPNO                = ' '
*   _SCOPE                 = '3'
*   _SYNCHRON              = ' '
*   _COLLECT               = ' '
When I execute the above code , I get a MESSAGE 'LOCK DONE' and i dont click on the tick mark yet. Instead , i log in as different user ('Amber') and execute the following code.
REPORT ZLOCK_ACCESS.
data: itab TYPE TABLE OF zemp_master WITH HEADER LINE.
select * FROM zemp_master into TABLE itab.
LOOP AT itab.
write:/ itab-empno.
ENDLOOP.
Now my previous prog (for SAPUSER) is still enqued , at the same time i execute the above code from the user 'Amber' hoping that it wont allow me to read and fetch data from the database for zemp_master table. But it displays the data successfully.
So how can i test my lock object so that it doesnt allow any other user to read while the lock has not been released.
THANKS

Not sure why are you not passing the field whose check has to be done ....You need to pass other parameter's as well and here sy-subrc eq 0 meand lock done you are checking other way around .....
Revert back if you need more info....
CALL FUNCTION 'ENQUEUE_*'
                              EXPORTING
                                mode_ycat_mrn = 'E'
                                mandt          = sy-mandt
                                field1         = wa_val-field1
                                 x_field1       = ' '
                                _scope         = '2'
                                _wait          = ' '
                                _collect       = ' '
                              EXCEPTIONS
                                foreign_lock   = 1
                                system_failure = 2
                                OTHERS         = 3.
                            IF sy-subrc EQ 0.
write 'lock obtained i am feeling lucky as i will update this as i have locked it '
else .
write 'locknot not obtained some one else is updating need to check after some time '
endif .
to test you can keep it locked in debugging mode and dry to put another lock in another session by calling enqueue module again ...
Hope it solves ,
Thanks,
Anjaneya .

Lock screen not translucent in iOS 7.0.3?

My Lock screen not translucent in iOS 7.0.3? Why not? How do I set this?

As @markwmsn said, simply go to the Settings, General, Accessibility, and uncheck the "increase contrast" option. this will make your Notification Center, Control Center and Lock Screen look translucent/transparent and colorful because they'll partially show the colors of the background behind them. Otherwise if that option is checked, they'll be just plain black or gray, no transparency and colors whatsoever. You must have unwillingly checked the contrast option...

FCP X locks up (not responding)

Twice now on two different projects, once after hours of editing and just today after 30 minutes of editing, FCP X locks up (not responding), spinning beach ball, and I must force close it. When I go to reopen the program and open my project, it is completely BLANK, nothing in it.
I have the lastest upgrade to FCP X and this has happened on both my Mac Pro desktop (Early 2009 with 10 GB of memory and plenty of HD space) as well as on my new Macbook Pro on an external drive.
I HATE that I cannot save the file myself and that APPLE thinks I'm too stupid to do so. YES, I know I can create a whole new project, but that entails saving related files, etc. Just not as simple as a simple SAVE.
Can anyone help me? I am not comfortable starting on a large editing project, unsure if it will lock up and I'll have to start over.

My advice is to learn to use a new Application and get comfortable with it (working reliably) before you even contemplate starting an important project.
FCP X is working very well for a great number of people, but it does have its quirks too.
To be able to help you find out why you are getting crashes, you need to supply a lot more information than you already have - length of projects, what video codec you're working with, Whether your media is optimised, where your media, projects and events are stored - how the HDs are formatted etc etc.
Don't lose heart! It's an awesome application - you just need to see why it's not working well on your system.
Here are some of the most common ways to improve performance (you may have already addressed some of these but it's worth reading them.
FCP X runs very well (not perfectly, by any means) on my 2009 MacPro 2 x 2.26 GHz Quad-Core Intel Xeon with 16 GB RAM and ATI Radeon HD 5870 1024 MB
First, check the spec of your iMac against the system requirements:
http://www.apple.com/finalcutpro/specs/
Particularly your graphics card. If it's listed here, it's not suitable:
http://support.apple.com/kb/HT4664
If you are getting crashes, there is some conflict on the OS. Create a new (admin) user account on your system and use FCP X from there - if it runs a lot better, there's a conflict and a clean install would be recommended.
Other ways to improve performance:
Create optimised media.
Hide Waveforms at all times when you don't need them (both in Browser and Storyline / Timeline). They take up a lot of processor power.
Create folders in the Project library and put any projects you are not working on currently, in there. (Twirl it closed to hide them).
Move your Projects and Events to an external HD (make sure it's formatted OS Extended - with journaled on or off) and run from there.
The biggest single improvement I saw in performance was when I upgraded the RAM from 8 GB to 16.
Andy

Livecache lock handler not available in APO

Hello Experts,
We are getting the error "Livecache lock handler not available" error when we are running planning jobs in SAP APO.
We are using parallel processing profiles for DP background processing jobs (Macro calculations) and I am getting this error only when a job is run with PP profile.
Below are the parameters of the parallel processing profiles:
Application: DP background processing
No of parallel processes: 2
Block Size: 500
The error message is written in the spool generated for the background job and the job fails. Eventually the process chain fails in which the job is included.
Please provide some pointers if anyone has come across the same error.
Regards,
Raghu

Hi JB,
Thanks for the note, Basis check the solution in the note and system seems to have met the requirements.
But one thing is likely to increase the MaxSQLLocks in the system as the demand of the locks is more than the availability. So basis is looking at this dimension to increase the number of locks in the system.
Will update soon in case of any conclusion.
Regards,
Raghu

All the fonts are in caps and the cap lock is not on. PSE 8

all the fonts are in caps and the cap lock is not on. PSE 8 Why is this happening and how do I fix it?

Suggest that you reset preferences. This will frequently correct things like you are experiencing.
Windows
Step 1. Hold down the Alt + Ctrl + Shift keys as you click on the icon to open Elements. When asked if you want to delete the settings file, say yes.
Step 2. Reset the preferences .
Step 3. Close Elements and let the file regenerate.

Live cache lock handler not available

Hi we are frequently getting this error Live cache lock handler not available and this causes our process chains to fail.
Can anyone please explain in details what this error refers to and direct to any good links for error resolution.

Hello,
1. As SAP customer, you could create the SAP message to the component BC-DB-LCA and get SAP support.
2. If you set the flag 'activate livecache lock' in tcode /SAPAPO/MSDP_ADMIN for your planning area on SCM system, please run the connection test for the LEA connection in /ndb59 to check the LEA connection settings.
The liveCache installation guide has additional information about LEA connection.
Regards, Natalia Khlopina

Livecache lock handler not available

Hello Experts,
We are getting the error "Livecache lock handler not available" error when we are running planning jobs in SAP APO.
We are using parallel processing profiles for DP background processing jobs (Macro calculations) and I am getting this error only when a job is run with PP profile.
Below are the parameters of the parallel processing profiles:
Application: DP background processing
No of parallel processes: 2
Block Size: 500
The error message is written in the spool generated for the background job and the job fails. Eventually the process chain fails in which the job is included.
Please provide some pointers if anyone has come across the same error.
Regards,
Raghu

Hi JB,
Thanks for the note, Basis check the solution in the note and system seems to have met the requirements.
But one thing is likely to increase the MaxSQLLocks in the system as the demand of the locks is more than the availability. So basis is looking at this dimension to increase the number of locks in the system.
Will update soon in case of any conclusion.
Regards,
Raghu

Hy rotation lock is not checked, why not rotate?

Similar Messages

Maybe you are looking for