HYP EPMA PLNG v11.1.2.1 - "One or More runtime prompts is invalid" error

Hello Experts,
When user rt. clicks and enters the Purchase Date and in Service Date from the Hyperion Calendar picker on the runtime prompt on the planning web form, user sees the following:
The folloiwng value is not valid for the runtime prompt 10/15/11. Under Planning Options, we changed the Planning Preferences Display Options Date format from automatically detect to MM-DD-YYYY.
Can anyone shed some light on as to anything else we need to check for the date format or anything else we need to change?

Hi Dieter
If Disk-delete-partiton didn't help, you need to re-install the software
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v441/configuration/guide/maint.html#wp1173532
To reinstall the system software on an NME-WAE network module installed in a Cisco access router, follow these steps:....
thx

Similar Messages

Major mail problem: "One or more recipient address was invalid"

Hello,
I had my iPhone 3G for 2 weeks now. I have been experiencing some major e-mail problems - basically, I cannot send e-mails to anyone except myself. When I type in my address (the same one that I send an e-mail from) it all goes well. When I type any other valid one, it does not get through. I keep on getting a pop-up message "Cannot send mail: One or more recipient address was invalid" - even though the addresses *are, actually, valid*.
Does anyone know how to solve this problem? Happens both with usual e-mails and with pic forwarding. Many thanks for your help.
Best,
Dynamitri

I'm using a POP account. Still - I can send to myself, can't send anywhere else.
Might try deleting the account and then configuring it again. Hope it helps.
And yeah, I have the latest software.
Best,
D.

Uninstalled Old PS Versions - Now Get "One Or More File. . .etc" Error Message When Launching PS CC

I just unistalled PS C3 through 6 on my computer leaving only PS CC for use going forward. Having done this I now get this error message when launching PS CC: "One or more files in the Adobe Application Support folder, necessary for running Photoshop, are missing. Please run the Photoshop installer and re-install Photoshop." The thing is PS CC still appears to be working okay once that error message is cleared. How can I get rid of that error message? I can't reinstall using the CC Updater because it still sees PS CC on the system thus it won't install another copy. I'd just as soon not uninstall it and I'm not sure that would fix the issue anyway.
Any ideas?

Hi jpolster,
You can uninstall PS CC through the Control Panel in windows/Utilities in MAC & the reinstall PS CC.
Thanks

One or more Runtime Repositories

LS,
I've been working with OWB903 for a while, but now we've migrated to 9.2, and I have a question about the best practice regarding the use of the Runtime Repository.
Since multiple project are going to be defined in OWB, do I need only 1 general runtime repository for all projects that are going to be defined in OWB, or shoud I have one runtime repository per project (and therefore a RRU and a RAU per project)?
Cheers, Patrick

I would recommend to have one runtime repository per project (and one runtime schema per project too). The runtime repository contains metadata on the runtime operations (what objects were deployed and when, what was the deployment outcome etc., also, what mapping/process flow etc. was run and when, what was the outcome...). This kind of info is strictly related to a single project/runtime environment configuration.
Regards:
Igor

Cluster network name resource 'Cluster Name' failed registration of one or more associated DNS name(s) for the following reason: The handle is invalid.

I'm stuck here trying to figure this error out.
2003 domain, 2012 hyper v core 3 nodes. (I have two of these hyper V groups, hvclust2012 is the problem group, hvclust2008 is okay)
In Failover Cluster Manager I see these errors, "Cluster network name resource 'Cluster Name' failed registration of one or more associated DNS name(s) for the following reason: The handle is invalid."
I restarted the host node that was listed in having the error then another node starts showing the errors.
I tried to follow this site: http://blog.subvertallmedia.com/2012/12/06/repairing-a-failover-cluster-in-windows-server-2012-live-migration-fails-dns-cluster-name-errors/
Then this error shows up when doing the repair: there was an error repairing the active directory object for 'Cluster Name'
I looked at our domain controller and noticed I don't have access to local users and groups. I can access our other hvclust2008 (both clusters are same version 2012).
<image here>
I came upon this thread: http://social.technet.microsoft.com/Forums/en-US/85fc2ad5-b0c0-41f0-900e-df1db8625445/windows-2012-cluster-resource-name-fails-dns-registration-evt-1196?forum=winserverClustering
Now, I'm stuck on adding a managed service account (mas). I'm not sure if I'm way off track to fix this. Any advice? Thanks in advance!
<image here>

Thanks Elton,
I restarted 3 hosts after applying the hotfix. Then I did the steps below and got stuck on step 5. That is when I get the error (image above). There
was an error repairing the active directory object for 'Cluster Name'. For more data, see 'Information Details'.
To reset the password on the affected name resource, perform the following steps:
From Failover Cluster Manager, locate the name resource.
Right-click on the resource, and click Properties.
On the Policies tab, select If resource fails, do not restart, and then click OK.
Right-click on the resource, click More Actions, and then click Simulate Failure.
When the name resource shows "Failed," right-click on the resource, click More Actions, and then click Repair.
After the name resource is online, right-click on the resource, and then click Properties.
On the Policies tab, select If resource fails, attempt restart on current node, and then click OK.
Thanks

Item cost not found for one or more items - Inventory Posting

Good Day Mentors,
My user has encountered an error during Inventory Posting and its "Item cost not found for one or more items".
The specific Message ID from SAP's System Message Log is 10001287.
I found a similar post which addresses this error here.
But unfortunately it did not help me solve my user's problem.
I already checked if the items had a defined "Item Cost" in the Item Master Data Inventory Tab, and they all have "Item Cost" defined.
I'm not sure if this will help, but below is the Inventory Audit Report of one of the items that is throwing the "Item cost not found" error.
I am not a business consultant neither am I literate in accounting, so thanks for the patience.
SAP Version: 9.0 PL5
Valuation Method: Moving Average
Thanks in advance!
Sean

Hi Augusto and Raviraj,
I've already verified in our production database the points you made:
- Is the "Manage Item cost per warehouse" selected in the Basic Initialization Screen?
YES
- Is the "Manage Inventory by Warehouse" ticked/checked in the "Inventory Data" tab of the "Item Master Data" screen?
YES
* I apologize for not have been able to give this information upfront.
Anyway, the database only has one warehouse at the moment.
I've checked the items, like the item in the screen shot above, and it does have an item cost.
Below is the screenshot of the sample item from my original post,
Thanks in advance!
Sean

Generally when creating a Word file from either a Mac or Win7 pc and opening it on two different machines (either one first) it always prompts that the file is open and will be opened as read only. However opening a CSS file does not prompt that it is alr

Generally when creating a Word file from either a Mac or Win7 pc and opening it on two different machines (either one first) it always prompts that the file is open and will be opened as read only.
However opening a CSS file does not prompt that it is already open on or from any machine which is causing code edits to be lost.
What we found from out testing:
- The file can be saved from one user to the server and WILL NOT PROMPT on other machines until the saving machine has the Dreamweaver program closed completely
- The file can be closed and Dreamweaver minimised to the launch bar but it still will not register on other machines that it has been changed.
- Also, until the Dreamweaver program is closed on the machines, it will continue to open it's saved version of the file.
Example Scenario:
- User 1 opens test.css (which is 2000 lines) and adds some code to the end of the file to bring it up to 2500 lines
- Meanwhile User 2 opens test.css as well (opens as 2000 lines as User 1’s edits have not yet been saved) and adds in code to bring it to 2300 lines
- User 1 saves his file and closes it - but Dreamweaver is still open.
- User 2 also saves his file and leaves Dreamweaver open.
- The server will report the size and last edit of the file the same as User 2 as he was the last person to save it (and if you open from the Win7 Machine it will show as User 2’s 2300 line version)
- If User 1 then open's the file again (from either the 'recent' in Dreamweaver OR clicking on the file directly in Finder...which version opens.... The version that User 1 saved! Not the true version on the server, but the version that User 1 edited and saved with 2500 lines in it.
- Same for User 2, he will open 'his' version with 2300 lines in.
Other information:
- Files are opened directly from the server
- Sometimes the users will save incrementally and re-open
- Most of the time users will save incrementally and keep the files open
- The users will never not save incrementally and just save when closing the file once finished
- The users are usually working on the files all day
- It is always the bottom lines of code that are lost. It could be a case of the two versions being mixed up and cutting off the newly added lines based on the line count (possibly).
It is as if Dreamweaver is holding a cache of the version locally and then only properly looking back to the server when it has been completely closed. It is very difficult to see how the server is causing such an impact on these files, there are very few logs which are giving any indication to the root cause of the problems.
Anyone know if this is a known issue?
Is there a way that there can be a featured implemented on the server that doesn't allow another user to open a file if it is already open on another machine?
Thanks

Your server file handling has nothing, and really nothing to do with Adobe software. If files don't get locked for (over-)writing and/or lose connection to the program opening them, then your server is misconfigured. It's as plain and simple and that. Anything from "known file types"/ file associations not being set correctly, MIME types being botched, crooked user privileges and file permissions, missing Mac server extensions, delayed file writing on the server, generic network timeout issues and what have you. Either way, you have written a longwinded post with no real value since you haven't bothered to provide any proper technical info, most notably about the alleged server. Either way, the only way you can "fix" it is by straightening out your server and network configuration, not some magic switch in Adobe's software.
Mylenium

Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.

Hi there,
I use visual studio community 2013 to develop app for office. When I create app project using template and directly run it, it shows me this error: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
Can anyone help? Thanks in advance.

Hi holm0104,
Did you add custom code into the project? Can you reproduce the issue in a new project without custom code?
If not, did you have issue when you create a normal web application?
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

"Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information" while attempting to open UNIX/Linux monitor

We have upgraded our System Center to 2012 R2, and we cannot open any of the UNIX/Linux LogFile monitor property or the UNIX/Linux process monitor property for those monitors created prior to the upgrade. Error we get is below. Any assitance
appreciated.
Date: 9/30/2014 10:01:46 PM
Application: Operations Manager
Application Version: 7.1.10226.0
Severity: Error
Message:
System.Reflection.ReflectionTypeLoadException: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
   at System.Reflection.RuntimeAssembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection,
Boolean suppressSecurityChecks)
   at System.Reflection.RuntimeAssembly.nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection,
Boolean suppressSecurityChecks)
   at System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, RuntimeAssembly reqAssembly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection,
Boolean suppressSecurityChecks)
   at System.Reflection.RuntimeAssembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean forIntrospection)
   at System.Reflection.RuntimeAssembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection)
   at System.Reflection.Assembly.Load(String assemblyString)
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.TypeContainer.get_ContainedType()
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.MomExtensionsCommon.AddTemplatePages(LaunchTemplateUIData launchData, Form form)
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.MomExtensionsCommon.Initialize(Object launchData, Form form)
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.MomExtensionsCommon.RunPrivate(Object[] userData)
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.MomExtensionsCommon.Run(Object[] userData)

It's possible the upgrade did not update everything properly as it looks like a dll mismatch or a missing file. I'd open a support ticket with MS and have a support engineer look at the upgrade logs. What version of SCOM did you upgrade from?
Regards,
-Steve

When one or more family members who have been sharing one iTunes account wants to create their own iTunes account can they each upload the music/apps from the shared iTunes on their devices to the new iTunes account?

When one or more family members who have been sharing one iTunes account wants to create their own iTunes account can they each upload the music/apps from the shared iTunes on their devices to the new iTunes account?

Yes. I would clarify your statement about the "shared" iTunes Library though. If you want each iOS device to have its own music library, you should create separate user accounts for them. Read:
iTunes: How to share music between different accounts on a single computer
How to use multiple iPods, iPads, or iPhones with one computer

How to delete the double records connected to one or more than one tables in SQL 2008?

Hi
Can anyone please help me with the SQL query. I Im having a table called People with columns names: personno., lastname, firstname and so on. The personno. is having duplicate records,so all the duplicate records i have written with "double" in
the beginning of the numbers. I tried deleting these double records but they are linked to one or more than one tables. I have to find out, all the tables blocking the deleting of double person. And then create select statements which creates update statements
in order to replace the current id of double person with substitute id. (The personno. is in the form of id's in the database)
Thanks

You should not append "double" in the personno. When we append it will not be able to join or relate to other table. Keep the id as it is and use another field(STATUS) to mark as duplicate. Also we will require another field(PRIMARYID) against
those duplicate rows i.e the main or the primary personno.
SELECT * FROM OtherTable a INNER JOIN
(SELECT personno, status, primaryid FROM PEOPLE WHERE status = 'Duplicate') b
ON a.personno = b.personno
UPDATE OtherTable SET personno = b.primaryid
FROM OtherTable a INNER JOIN
(SELECT personno, status, primaryid FROM PEOPLE WHERE status = 'Duplicate') b
ON a.personno = b.personno
NOTE: Please take backup before applying the query. This is not tested.
Regards, RSingh

How can I create a new Care Plan with one or more care tasks

Hello,
I'm working on a Dutch website in the HealthVault Environment. I got difficulties in creating and updating a careplan with care tasks. Most likely it's due to lack of knowledge...
Following code works fine:
CarePlan plan = new CarePlan();
plan.Name = "test";
this.PersonInfo.SelectedRecord.NewItem(plan);
It creates a plan called [test]. But I don't know how to create a plan with one or more tasks in it: the tasks property is read only.
https://msdn.microsoft.com/en-us/library/microsoft.health.itemtypes.careplan.tasks.aspx
Half a year ago I was able to add an example of a careplan, which was a feature of the dev tools, but for some reason that's not possible anymore.
https://developer.healthvault.com/DataTypes/Overview?TypeId=415c95e0-0533-4d9c-ac73-91dc5031186c
So my question is, how can I add a new care plan with a task like the example from the HealthVault dev tools:
<tasks>
<task>
<name>
<text>Run 100 miles</text>
</name>
<description>Run 100 miles in 6 months</description>
<start-date>
<structured>
<date>
<y>2013</y>
<m>12</m>
<d>1</d>
</date>
</structured>
</start-date>
<end-date>
<structured>
<date>
<y>2014</y>
<m>6</m>
<d>1</d>
</date>
</structured>
</end-date>
<target-completion-date>
<structured>
<date>
<y>2014</y>
<m>12</m>
<d>31</d>
</date>
</structured>
</target-completion-date>
<sequence-number>279128532</sequence-number>
<recurrence>
<interval>
<text>Once</text>
</interval>
<times-in-interval>10</times-in-interval>
</recurrence>
<reference-id>p01vil21ckg7k2346y1g60337mmi20sg564l321l8pmpqev39n302572sewu76lh9019s3993e02924</reference-id>
</task>
</tasks>
Any help is welcome
Wilfred

Hi Wilfred,
Have you tried this?
CarePlan plan = new CarePlan();
plan.Name = "test";
plan.Tasks.Add(someTask)
If you have a task list already, you would need to enumerate through it and add one by one...
foreach (var task in existingList)
plan.Tasks.Add(task)

I am trying to upload photos from my digital camera. Every time I try to plug it into my USB, the following error message comes up: "Because a usb device was drawing too much power from your computer, one or more of your USB devices have been disabled."

I am trying to upload photos from my digital camera. Every time I try to plug it into my USB, the following error message comes up: "Because a usb device was drawing too much power from your computer, one or more of your USB devices have been disabled."
I don't have anything else plugged into my MBP, so I am confused as to what's going on. This problem has never happened before. MBP is less than a year old - about 9 months old. HELP

Get a powered USB hub.
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

I cannot erase alias JPeg images on a memory card so that it will not accept any more which I try to load onto it, yet there are no actual images available if I click on any of them. The error message states that one or more cannot

Cannot delete aliases for JPeg images on a lumix camera memory card even selecting individual images anjd trying to move to trash -error35 one or more items cannot be found. No image available on clicking or if card put back into camera-"no images to disply" Yet if try to add more images, message that card is full! Any suggestions?

Deleting from iPhoto or image capture after import should be fine and shouldn't cause any issues. Deleting from the folder view of finder, can cause issues as the camera can the image is still there. You can try emptying the trash on your mac if you deleted them via the finder, as although you've deleted it, it's only marked as trashed and not actually deleted until you empty the trash - ie it won't relieve the space taken by the files.
If your still having issues after you try this, you may be best formating the memory card. This will wipe all data on it though, so make sure you do copy anything off that yo u want to keep! Format from the camera, so that choosing the format>erase all option from the menu of most cameras.

The operation can't be completed because one or more required items can't be found. (Error code -43)

When I attempt to add files to...or copy to the desktop of my mac, my icloud (idisk ..the blue icon on my desktop) is giving this error:
The operation can’t be completed because one or more required items can’t be found.
(Error code -43)
I've been searching for info on that error code, but I'm not find anything on (many different error codes, but not -43).

I get an error -36.
I did the dot_clean in the terminal.
Did not fix it.

HYP EPMA PLNG v11.1.2.1 - "One or More runtime prompts is invalid" error

Similar Messages

Maybe you are looking for