Hyper draw doesn't appear unless you set Hyperdraw/Articulation ID

From the last 2 or 3 version Logic has an annoying behaviour on score window: Hyper draw doesn't appear unless you set Hyperdraw/Articulation ID/Any or None...
This procedure has 3 minus points:
1. The editing is slowed down
2. Every time you close and reopen the score window YOU HAVE TO REDO IT!!!!
3. What is it for?.....
It was better before...

For Radeon 7000, you need to:
pacman -S xf86-video-ati
You need to load those modules in /etc/rc.conf:
MODULES=(agpgart via-agp)
And in xorg.conf:
Driver      "radeon"

Similar Messages

  • My submit button on my contact form doesn't appear unless you rollover the menu.

    Also - you can't fill in the fields properly until you have done the said rollover either!
    Any ideas?

    Please check the states defined for the button , normal state should show the button image or any fill you have used.
    Thanks,
    Sanjit

  • How can I use my Dx7 as a MIDI controller for Logic Pro  9? I'm using MIDI/USB cable but Dx7 doesn't appear in the 'set-up' list, what am I doing wrong?

    I'm using Logic Pro 9 -  9.1.8
    MacBook Pro Retina OSX 10.9.3
    DX7 2 FD connected to my laptop with a MIDI/USB cable
    When I click the 'scan all models' search in the 'Control Surfaces Set Up' there is no Yamaha DX7 in the list so how can I make Logic 'see' the DX7?

    As Colin pointed out, you have to look first in the Audio MIDI Setup. If your MIDI Device doesn't show up there, then Logic cannot see it either (unless you are using Logic Remote on your iPad to play over Wi-Fi).
    I'm curious about the "MIDI/USB cable you mention. If the DX7 has a standard 5-pin DIN MIDI out jack, then you have to connect that to a MIDI Interface first that converts the MIDI signal to send it over the USB jack out. Please note that you would see the MIDI Interface in the Audio MIDI Setup  app and not the DX7 itself. Also, in Logic you would see the MIDI Interface in the Environment as a valid MIDI input device.
    Hope that helps
    Edgar Rothermich
    http://DingDingMusic.com/Manuals/
    'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

  • Very annoying issue: Hyper draw doesn't work in Score

    The concerning display remains grey and no data appears on it....
    Very very annoying.......

    Hi
    Go to View Hyperdraw:Articulation ID and select "any"
    Then try to display Hyperdraw velocity
    Note that the 'Articulation ID" option has disappeared ;-)
    Now you see it
    Now you don't.... but you do see Note velocity in Hyperdraw
    CCT
    Message was edited by: CCTM.... typo

  • Homepage doesn't show unless you click page. . . ?

    Has anyone experienced this? My site won't show up in Safari, it loads but the page is white unless you click the page.
    It's fine in other browsers, and it always worked in Safari until this last update.
    thanks
    enzosf

    Enzo,
    I had the exact same problem a while back with GoDaddy. (along with everyone else forwarding to .mac) If I remember correctly ( I could be wrong) it only affected iWeb viewed with Safari. But it did turn out to be a code change on Godaddy's side.
    It took a few weeks to resolve. GoDaddy customers were in contact with tech support. GoDaddy began monitoring this forum and eventually figured out and corrected the problem.
    It certainly could be something else causing your problem but it does sound very similar to my experience with GoDaddy.
    Sincerely, David Phelps http://web.mac.com/phelpssculpture/iWeb/
    "I may receive some form of compensation, financial or otherwise, from my recommendation or link."
    ibook & imac   Mac OS X (10.4.9)  

  • Window doesn't refresh unless you click to another app (on Mac)

    When I scroll, click on a link, or click on another tab to switch to it, FF appears to be frozen and nothing moves/changes/happens on screen. If I then click to another app (e.g. Outlook) and then back on FF, the new content appears instantly. It appears as though the browser is loading the requested information, but does not actually ''draw'' it until I click away and click back.
    I already tried deleting and reinstalling.
    ETA: This happens every time I use FF, not immediately upon opening. It crops up when I've been using it for a little while (say, a half-hour). It may have to do with having multiple tabs open, but I don't see an exact correspondence between the problem and visiting specific sites or having a certain number of tabs open.

    I am unable to click to select with my track pad so I enabled my magic mouse in order to even get into System Preferences to check settings. I understand that they are set up separately. Unfortunately, that didn't help

  • Can you set up Remote app to Apple TV without original Apple TV remote?

    I lost my Apple TV remote, so I tried looking up other ways to control my Apple TV. I found the Apple Remote app, but I can't get it to work. The setup information I found indicates that you have to turn on home sharing on the Apple TV, but that can't be done without a remote. Obviously I don't have a remote right now, so I'm trying to find out if there's another way to get my Remote app to work on my Apple TV without the original remote. Can anyone help?

    Can be done. All you need is your iPhone/ Ipad.
    Learn how to set up your Apple TV (3rd generation) using an iOS 7 device.
    With Apple TV software 6.0 or later, you can set up your Apple TV (3rd generation) by transferring the following from your iOS 7 device:
    Wi-Fi network and password
    iTunes Store account
    Language and region format preferences
    System requirements
    To use your iOS device to set up Apple TV, you need the following:
    Apple TV (3rd generation) using Apple TV software 6.0 or later
    One of these iOS devices using iOS 7 or later
    iPhone 4s or later
    iPad (3rd generation or later)
    iPad mini
    iPod touch (5th generation)
    Setting up your Apple TV
    Follow these steps to set up your Apple TV (3rd generation) using your iOS 7 device.
    Connect your Apple TV to your television and power and wait until your Apple TV displays the setup screen.
    Unlock your iOS 7 device and ensure that Bluetooth is enabled. Also ensure that you are connected to the Wi-Fi network you want to use with Apple TV.
    Touch your iOS device to your Apple TV and wait for the prompts to appear on your iOS device and Apple TV.
    Enter your Apple ID and password on your iOS device.
    Choose if you want Apple TV to remember your Apple ID password, and if you want Apple TV to send data to Apple.
    This does not change your iOS device preferences.
    Your Apple TV will start the configuration process, including connecting to your Wi-Fi network, activating Apple TV, and setting up your iTunes Store account.
    When complete, your Apple TV is ready to use.
    Troubleshooting tips
    If you encounter an issue setting up your Apple TV using an iOS device, try the following:
    If the Automatic Setup screen doesn't appear when you touch your iOS device to the Apple TV, verify that you:
    Have an Apple TV (3rd generation) using Apple TV software 6.0 or later.
    Use a supported iOS device with iOS 7 or later.
    Note: iPhone 4 and iPad 2 are not supported.
    Verify that your iPhone is unlocked and that Bluetooth and Wi-Fi are on.If the issue persists, press the Sleep/Wake button to lock your iOS device, then press the Home button and slide to unlock and try again.
    While configuring your Apple TV, keep your iOS device within 10 to 15 feet of your Apple TV until the configuration process completes.If you go out of range or the setup doesn't complete, restart your Apple TV by unplugging it from power for a few seconds and then reconnecting it.
    If you are still unable to set up your Apple TV with your iOS device, you can set up your Apple TV with the included remote instead.

  • How do you set up location services

    how do you set up location services

    Look on the side of your WiFi router/modem and there should be a string of numbers and letters, unless you set up a custom password when you bought it. In that case, you would probably have to call your WiFi service provider and talk to them.

  • App published but doesn't appear in Windows Store unless you click on the right link ( the search doesn't show my app )

    My app doesn't appear in the Windows Store unless i click on its link ( if i search it, Windows Store doesn't show my app ).
    PS : My app work properly and it has a Windows store page
    Do i just need to wait?
    Thank You

    When did you publish to store? It might just be a matter of waiting for it to show up:
    http://social.msdn.microsoft.com/Forums/windowsapps/en-US/cfc243bd-f843-4f25-9d54-b14638a1c22e/my-app-does-not-show-up-in-search-results?forum=windowsstore
    Thanks
    Robin

  • I open a file - playback - the audio is there - doesn't appear in timeline, but I hear it, after 1 edit, the audio disappears.  I have to reboot to get it back then it happens again.  All suggeswtions welcome.  Thank you, Randy

    I open a file - playback - the audio is there - doesn't appear in timeline, but I hear it, after 1 edit, the audio disappears.  I have to reboot to get it back then it happens again.  All suggeswtions welcome.  Thank you, Randy

    Is your Premiere Elements 12/12.1 running on a Windows 7, 8, or 8.1 64 bit computer or a Mac computer?
    What is the brand/model/settings of the camera recording your video?
    Windows 7 64 bit PC 
    Footage taken from DVD through Adobe Premiere Elements
    Are you sure about the Frame Width and Frame Height that you gave 720 x 484? Did you mean 720 x 480?
    Yes, my err.  720X480
    For the Frame Rate, was it really 29.97 frames per second and you rounded it off to 29 frames per second? Or,
    is the frame rate really 29 frames per second?
    If the properties that you just posted are representative of your source file, what project preset did you or the
    project set for the project preset? If you are not sure, please tell us the readings for Editing Mode, Timebase, Frame Size,
    and Pixel Aspect Ratio under Edit Menu/Project Settings/General.
    Still having problems - haven't been able to edit project. 
    Thank you for your help.
    Randy Klein

  • Text appearance in adobe acrobat (pro) files displays inconsistently unless you zoom in. Mainly 'i's and 'l's look bigger than they should.

    Text appearance in adobe acrobat (pro) files displays inconsistently unless you zoom in. Mainly 'i's and 'l's look bigger than they should.
    The pdfs print fine though.

    Try doing a spotlight search for all files that start with AdobeFnt. They will be named AdobefntXX.lst, with the XX being some number. They will be scattered across the drive... After making sure that all Adobe applications are closed, trash all the adobefntxx.lst files, those with the 3 letter extension .lst.
    Then, restart the system, and open the files in Acrobat again.
    Otherwise, what happens in Safe boot? (Remember, Safe boot loads only a default set of fonts.) If they display fine there, the problem most likely is a font issue, one of the fonts that Adobe installed.
    Check Adobe's web support page for troubleshooting Fonts.
    - or -
    Contact Adobe about the whole issue, it is after all, Adobe Acrobat... Adobe's contact number is 800 833 6687.

  • My iPhone doesn't appear in iTunes after setting up iCloud syncing

    I have an iPhone4 and have updated to ios 5 and have a macbook pro running Lion and have updated that and iTunes. Everything was goig OK but after setting up iCloud syncing I find if I want to sync by usb my iPhone doesn't appear in the devices. Maybe I have done something wrong, but I did usb sync once after all the setting up?

    Did you try recovery mode?
    iOS: Unable to update or restore

  • I recently bought a WD My Book Live to backup using Time Machine, now that I've upgraded to and my old NAS won't support Mountain Lion. The WD drive appears in the Finder, it doesn't appear as an option when setting up the backup disc in Time Machine.

    I recently bought a WD My Book Live to backup using Time Machine, now that I've upgraded to and my old NAS won't support Mountain Lion. The WD drive appears in the Finder, but it doesn't appear as an option when setting up the backup disc in Time Machine. Any ideas please?

    " now that I've upgraded to and my old NAS won't support Mountain Lion. "
    Do you have a few words missing in the original question ?.
    When i upgraded from LION to MOUNTAIN LION it made NO difference at all to my MyBook Live !!!
    reading the original post again and again, do you in fact have two My Book Live units, an old one and a new one ?
    tim

  • HT201317 icloud doesn't appear in my network & internet screen on my windows pc.  I do I set it up?? thanks

    icloud doesn't appear in my network & internet screen on my windows pc. HowI do I set it up?? thanks

    Have you downloaded and installed it?

  • After upgrading to iOS5,everything was restored.I couldn't find the downloaded movies I had before.I kept on syncing it with iTunes.I can see videos are taking up space on my Ipad 2 memory but it doesn't appear,only songs appear.thank you..

    After upgrading to iOS5 & everything was restored,I couldn't find the downloaded movies I had before.I kept on syncing it with iTunes.I can see videos are taking up space on my Ipad 2 memory in the iTunes page but it doesn't appear,only songs appear on the Music.thank you in advance for your assistance..

    They are now in the videos app!

Maybe you are looking for