Hyper Editor questions!

I wonder if anyone could answer this:
1) how to alter the length of the notes in Hypereditor?

oops
2) how to set quantize value for hypereditor?
the manual is so short about this wonderful editor.

Similar Messages

Ultrabeat and Hyper Editor

Hi there,
I have a feeling I know the answer to this question so I am just seeking confirmation really!
I have got used to changing AU controls in the hyper editor using fader event definitions. The way I generally do this is by creating a new definition, connecting a 'monitor' module to the channel in the environment and moving a knob. The monitor reports the (my terminology may be wrong) internal channel, followed by the control ID of the knob I was moving. I then set the channel and number settings on my hyper editor definition and it works fine for controlling that setting.
However, when using ultrabeat I follow exactly the same process, the channel and number gets reported by the monitor module but it never seems to work once i put that info into the hyper editor definition.
The weird thing is that it also doesn't work for inserts on the ultrabeat channel. Using a channel number of 3 or 4 for example allows me to control the inserts in slots 1 and 2 on most channels, but on an ultrabeat channel this doesnt work either!
So, is this just because of the huge array of parameters available on ultrabeat, does it just disable any kind of hyper-editing in this way because the max 'number' setting of 127 is not enough to define all the controls on ultrabeat? It's annoying that it seems to stop inserts as well because otherwise you could use extra effects to replace the stuff you can't do on ultrabeat itself..
oh well, I hope that makes sense!

These kits are mostly reasonably sized multisampled kits, and so require the EXS24 (or Garageband versions of the EXS24).
Ultrabeat's sample playback doesn't support multisampling, so you can't load those kits into Ultrabeat directly.
The best thing to do is create a blank template sample-playback only kit in Ultrabeat, then navigate to your GB samples directories and drag in the kicks/snares/hats/etc drum samples you want, and save the kit. That way, you can create dozens of UB kits with your favourite samples.

Is "AutomationTool" available in PianoRoll hyper-editor now?

Is "AutomationTool" available in PianoRoll hyper-editor now?
SvK

Hi SVK,
Long time.
There's a new Logic 8 forum that we should be using for these new questions...besides, no one actually has LP8 yet (unless they signed an NDA).
X

German word: 'Anschlagstärke' in Hyper Editor? logic 7.2.1

Hi People. I'm a newbee on the forums and with music making, so first...hi to you all!
My question...
When i hyperedit a region, the Hyper Editor displays this...
Volume
Pan
Modulation
Pitch Bend
Ch. Pressure
Poly Pressure
Program and
'Anschlagstärke' What the...?!
Does everybody have that with 7.2? Or 7.2.1?
Did i do something wrong with an update?
Greetings,
Benny
(yes...i'm a nitpicker...

Have a look at this post, might help....
http://discussions.apple.com/thread.jspa?messageID=1999821&#1999821
best, Fred

Is "Automation Tool" available in PianoRoll hyper-editor now?

Is "Automation Tool" available in PianoRoll hyper-editor now?
SvK

Hi SVK,
Long time.
There's a new Logic 8 forum that we should be using for these new questions...besides, no one actually has LP8 yet (unless they signed an NDA).
X

Hyper Editor Bug

Hi, everythings been fine but over the last few days, i have noticed that i will be working away then all of a sudden the volume slider of the channel i'm on suddenly jumps to +2.6 db. (always 2.6)
I have no idea why this has started happening and it's really getting annoying now.
When i record on a midi channel, it will record the jump in level in the hyper editor which leads me to believe that it is something to do with that and not automation.
I'm not sure but i know it's **** annoying.
Any help would really be appreciated, thanks guys
(latest update and os x too btw)

Same here. I usually right click when I' done my actual entry to get the mouse to let go. Then I have to undo the extra info inserted before the release. Annoying, but workable.

How can I erase velocity in Hyper editor?

I unintentionally let my breath controller write velocity into the hyper editor. I can't get the event list to show velocity in the hyper editor. I must not understand the event list. would someone please help?

Thanks all, It was in the editor drop down menu=delete hyper set.

Hyper Edit Question

Hi All,
I think I already know the answer but I'll ask anyway. Can I use the Hyper Editor to edit drums in different regions on the same track or does the Event Definition apply to the entire track? It seems like I can only have a massive single region on the drum track. I think it would be better if I could use it to edit data in individual regions.
Thanks and regards
David

G'Day!!!!!
I just noticed that the Hyper Editor follows the region selected in the main arrange window so although it does use one long stream of data in the hyper edit window, it lets me do all the stuff I need to with my individual midi regions in arrange. Panic over (just discovered how easy it is to use HE to create drum patterns).
Re the weather : I'll give you one guess what it's like. Yip, it's dull, cold and raining.
Thanks and regards
David

Hyper editor for controling plug-ins

Hi! the plugins won't listen to fader midievent from the hyper editor in one of my projekt. It works fine on another projekt. I try to control highcut freq on an eq on a chanal strip. I've checked that the type, channel and pitch is correct. Have anyone any idea what it could be?

Hi, I was kinda curious about this and decided to d/load the Reaktor 5 demo and tried it out. No problem mapping screen controls from Mainstage to R5 knobs or sliders and it remembered all the connections between each patch just fine.
I didn't do anything special just the usual click the Mainstage control then mapped the parameter to a control in Reaktor 5 and it worked fine even with the R5 demo. Maybe you can provide a little more detail on how you tried to configure?

Adjusting Curve Shape in Hyper Editor

Hello all,
Is there a way to adjust the curve/slope shape (more concave, more convex...etc) drawn in Hyper Editor like how we can do with the automation in arrange window?
thanks.

Why not use Expression CC#11 in HyperDraw which is available below the Piano Roll?
Click on the line a couple of times with the pointer tool: Once before the point where you want the note to fade and another at the end point of the fade. Drag this second point down with the pointer tool.
If there are more notes after this point that need to sound, then you need to click a third time at the existing level before you drag down the second point.
Read the User Manual chapter entitled "Using Hyper Draw in the Piano Roll Editor"

Possible in hyper editor?

Is it possible to use the hyper editor to do something like: attach a pitch change to the end of all the (midi) notes within a certain range or time frame? In other words, if I want each note from bar 1 to 20 to bend up 4 semitones, is that possible?

OK, then just draw one eighth note of pitch bend data, you'll need a hi-res grid for it to be meaningful, copy it, move the spl to the next note location and paste. You can do this all with key commands.
The problem is that you have little control over it, other than varying the scaling that the synth responds to pitchbend. It did however, only take me 45 seconds and a few mouse clicks to open Sculpture, target envelope 2 to Pitch and set up the envelope for an eigth note sync'd to tempo. Then you just automate/toggle the Enable Envelope 2 Target 1 parameter for the bars that want the effect.
But hey, if you want to do it with pitchbend, then you go guy!

Hyper editor

Hi
in a bass line, (midi) i want one note to fade. In the hyper editor, i use the volume track and it works fine, only in the mixer the volume slider happily moves up and down acording to the volume of the hyper editors curve. To be able to control the overall volume of the bass again, i send that bass track to a bus.
Apple midi loops are full of that little white lines and the fader in the mixer never moves. Can i manage that too? I feel i make it over complicated and there is an easier way, is there?
Turning the region into an apple loop leaves me with the same result, the fader in the mixer still moves.
The manual has left me clue less.
Pra

Why not use Expression CC#11 in HyperDraw which is available below the Piano Roll?
Click on the line a couple of times with the pointer tool: Once before the point where you want the note to fade and another at the end point of the fade. Drag this second point down with the pointer tool.
If there are more notes after this point that need to sound, then you need to click a third time at the existing level before you drag down the second point.
Read the User Manual chapter entitled "Using Hyper Draw in the Piano Roll Editor"

WhaTS going on with my hyper editor

OK, so all of a sudden, when I create a GM set in my hyper editor the tags are wrong, for example where it says Kick 1 the sample I get is like a bongo or something, I've used the hyper edit with this instrument (the Garage band Rock Kit) like a hundred times and this has never happed before, whats going on?

Welcome to the Apple Support Communities
They replaced the logic board but not the memory. Take the Mac to an Apple Store to replace your memory or buy the memory and install it yourself

Notes disappear in Piano Roll and Hyper editor

When recording with either the piano roll editor or the hyper editor windows open the notes disappear and then reappear when recording is stopped....does anyone know how to turn this off? so annoying. thanks.

Pancenter wrote:
christianobermaier wrote:
Uncheck the Link button of the Piano Roll.
Christian
The only version(s) that showed both previously recorded notes and new ones as they were played was the last few PC versions of Logic.
pancenter-
I wonder why they did away with that...it's very helpful to be able to see that....

Using Hyper Editor to automate plug-in parameters

Is it possible to use the hyper editor to automate any FX or inst plug-in that you wish? if so, how do you do so?

Hi
It is indeed possible to automate Instrument and FX Insert plugins using HyperEdit.
This involves setting up Event Definitions in HyperEdit:
Individual parameters can be accessed using 'FADER' events as the Status, with the MIDI channel setting which 'Insert' slot the events are addressing (Ch 2= I/O, Ch 3= Inset slot 1 etc). The Number parameter sets the specific parameter.
If you only need to control a few parameters, the easiest way to set this up is to create some Track-Based automation, then convert this to Region-Based using the Track:Track Automation:Move commands.
Once you've done this, select the events in the Event List and make a hyperset.
HTH
CCT

Hyper Editor questions!

Similar Messages

Maybe you are looking for