Hyper-V: after convert from physical to virtual not start

Hi
i'm converted windows server 2008 R2 standard to virtual after this created new virtual machine and everything it is ok
the problem
The virtual machine no start since i started still now it is showing (Status:Running )
specification
Server IBM x3650 m4,RAM 32GB,Processor Intel(R) Xeon(R) CPU E5-2620 0 @ 2.00GHz, 2001 Mhz, 6 Core(s), 12 Logical Processor(s)
Include ( Microsoft SQL Server 2008 R2 - oracle sql developer version 2.1.1.64 )
Hope to help me to solve this problem

Dear Brian Ehlert
Thanks for reply
1) how did you perform the P2V?
Disk2vhd
2) is this a generation 1 VM? (it must be)
Yes, it's a generation 1
3) did you attempt to repair the bootloader in any way?
NO
Note:
i tried to run this vm in different server (Hp and Dell) but the same problem
Hope to help me to solve this problem

Similar Messages

When using Adobe Export PDF - I cannot save a document after converting from PDF. Why not?

When using Adobe Export PDF - I cannot save a document after converting from PDF. Why not?

What happens when you click the Save/Download button after the file conversion is complete?

Conversion from physical to virtual server

Our server technology group wants to convert our physical
server that contains the RoboEngine to a virtual server (using ESX
VMware). We are using RoboHelp 5 to publish WebHelp to the
RoboEngine. Has anyone else converted from a physical to a virtual
server? If so, could you tell me about any problems you
encountered?
Thanks,
Liz

Hello Nelson,
There are quite lot of things in TMG which are dependent on Hardware.
If you want to migrate from physical to virtual server, you can follow the steps here which are recommended/supported way of doing it.
Though this article is for ISA to TMG migration, still you can follow the same steps for Physcial to Virtual migration.
http://technet.microsoft.com/en-us/library/dd440994.aspx
Please let us know, how it goes!

Unable to install iTunes after converting from Windows Vista to Windows 7. Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193).

Unable to install iTunes after converting from Windows Vista to Windows 7. Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193). I have my iPod plugged into my computer via USB port. What am I doing wrong?

i have the only account on my laptop so have checked and am the account administrator
i run windows 7 home premium
I have the same problem and
have followed the link uninstalling in the correct order,
then restarted as per instructions,
went to Apple to download itunes,
hit download now,
Visit the iTunes download page. Click Download Now to download the iTunes installer. When prompted, click Save (instead of Run).
did not get a save instead of run prompt
Right click on iTunesSetup or iTunes64Setup (the installer you downloaded in step 3).
If you have Windows Vista, Windows 7, and Windows 8: Choose "Run as administrator."
i can only click run as administrator from right clicking the shortcut on my desktop screen
If iTunes fails to install or repair, it might be necessary to remove components left from a previous installation of iTunes and then reinstall.
sick of doing this
at least 7 or 8 times i have re installed itunes to no avail
troubleshooting no better
please help. pulling my hair out at this stage
it was working fine until 2 days ago when i opened itunes it offered to update to 12.1
not working since i clicked yes
also i have gone to restore previous point and ffs there are no restore points before my multiple reinstalls
really dont want to have to restore factory settings

Sap Server movement from physical to virtual(p2v)

Hi all,
We currently have two older versions of R/3 running 4.6c and 4.7ee, both IDES versions.
These versions have been out of support for some time.
We have these instances running for reference purposes. We have new versions of R/3 ECC 5.0, 6.0
also running in our company. All these versions of R/3 are IDES.
Our Windows administrators are of the opinion that servers on which the instances 4.6c and 4.7ee are running are very old,
and spares are hard to find. So they want to move these instances from a physical environment to a virtual environment.
I have read through the Note: 1409608.
It says,
SAP does not support SAP systems that are installed on Windows 32-bit
in a virtualized environment. If you plan to migrate your SAP system that is running
on native hardware on Windows 32-bit to a virtualized environment
on Windows 64-bit, it might be necessary to upgrade the SAP system to a higher release.
For these configurations, SAP recommends to migrate the SAP system to Windows x64 first
and then upgrade the SAP system.
Now, I don't think is it quite possible to upgrade 4.6c and 4.7ee to 64 bit.
License keys on windows are based on SID, Hostname, MAC address of the network card.
If we make sure that the MAC address is the same and
that its at the same place as before(sequence of multiple network cards is the same),
we can still Use the old license.
Our Windows guys say its very hard to retain the MAC address, they can try it.
So with these old versions of R/3, how can we keep them running, if they have to be moved from Physical to virtual,
as license keys and installation software is hard to get.
Regards,
Vishnu.

Hi Markus,
Thanks for your reply. Would open an OSS call.
I have looked at the note mentioned by you, and since our OS is windows, I thought the below statement
holds good in my case. From the note I have also deduced that for Windows, licenses are based only on the Hardware Key.
Am I wrong in assuming this?
Only Windows uses a hardware key that does NOT depend on the hardware.
A new installation of Windows definitely causes the hardware key to change.
I have also looked at note 793649, which says Hardware key changes only when,
1. Formatting the machine and reinstalling Windows.
2. When changing the computer name.
3. When changing the domain (it will not change back when returning to the previous domain).
Regards,
Vishnu.

SCCM 2012 hierarchy from Physical to Virtual

I have an existing standalone SCCM 2012 hierarchy on a physical server with ~ 50K clients reporting with additional servers hosting various site system roles. Now the requirement is to migrate this hierarchy on a virtual environment. Client doesn't want
to do P2V migration and wanted to have the migration done on new infra.
In current hierarchy we have client health compliance at ~90% and we have to maintain the same post migration additionally there are lot of collections, packages and deployments those needs to be successfully migrated.
Please suggest a feasible and most efficient solution for this

Client doesn't want to do P2V migration
Assuming that you have done your homework and are OK that Virtual is the way to go, the easiest way to migrate from Physical to Virtual is to carry out a P2V migration. I don't quite understand this.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

After restore from backup, iphone is not getting start, only apple logo is there on screen

after restore from backup, iphone is not getting start, only apple logo is there on screen

Hi there.
Try some basic trouble shooting steps first, before looking into some advanced issues that might be causing this. The first thing I would try, is holding down the power button and home button at the same time until the screen turns off on you. See what steps you can take from there, if any.
Kind Regards.
- Mike.

After upgrading to 27, firefox will not start. Saw an error message during the upgrade process.

After upgrading to 27, firefox will not start. Saw an error message during the upgrade process but cannot remember.
Tried to run firefox.exe -P but receive error message:
XML Parsing error: undefined entity
Location: chrome://mozapps/content/profile/profileSelection.xul
Line number 18, Column 1:
<dialog
^
Running on Windows XP SP3. No problem whatsoever before upgrading to 27. Sending this from Chrome as I cannot open Firefox at all.

Thanks jschaer2000: after starting it once in safe mode, I closed Mozilla and tried several restarts in normal mode. So far, all worked:-)
Thank you very much again.
Still the automatic update process bothers me: it took me several days to discover the reason to the malfunction, since when I removed the problematic version from Add and Remove Programs, I didn't pay attention at first that it was another version, not v26 which I installed from my folder.
In addition, I like to save the installation files before I run new programs and if I didn't have v26 exe file, I couldn't have operated Mozilla at all. Not that it was fun to remove and install again each time v27 didn't react, but it was better than nothing, I still prefer Mozilla over its competition.

After the reboot, ssh demon is not starting up

Hi Folks,
After the reboot, ssh demon is not starting up in Solaris 9 server.
1) Does any change in package?
2) If it need to install the new package, sunfreeware seems to not active.
# /etc/init.d/sshd start
Starting SSHD
:/# OpenSSL version mismatch. Built against 90702f, you have 9080cf
:/# pkginfo | grep open
application SMCossh openssh
application SMCossl openssl
:/# pkginfo -l SMCossh
PKGINST: SMCossh
NAME: openssh
CATEGORY: application
ARCH: sparc
VERSION: 3.7.1p2
BASEDIR: /usr/local
VENDOR: The OpenSSH Group
PSTAMP: Steve Christensen
INSTDATE: Jun 22 2007 15:20
EMAIL: [email protected]
STATUS: completely installed
FILES: 51 installed pathnames
10 shared pathnames
11 directories
10 executables
1 setuid/setgid executables
3059 blocks used (approx)
:/# pkginfo -l SMCossl
PKGINST: SMCossl
NAME: openssl
CATEGORY: application
ARCH: sparc
VERSION: 0.9.8l
BASEDIR: /usr/local
VENDOR: The OpenSSL Group
PSTAMP: Steve Christensen
INSTDATE: Jan 10 2012 10:52
EMAIL: [email protected]
STATUS: completely installed
FILES: 1563 installed pathnames
1 shared pathnames
42 directories
27 executables
23412 blocks used (approx)

Clearly it's telling you what is wrong:
Starting SSHD
:/# OpenSSL version mismatch. Built against 90702f, you have 9080cf
Why not use the ssh that comes with Solaris 9 instead of the opensource version?
SUNWsshdr and SUNWsshdu or the Secure Shell Cluster (SUNWCssh):
http://docs.oracle.com/cd/E19683-01/817-0488/installbugs-222/index.html

I have I phone 4s. I made update and after that the WI-FI is not starting. Can somebody tell me what to do? Thank you

I have I phone 4s. I made update and after that the WI-FI is not starting. Can somebody tell me what to do? Thank you

I have the exact problem on my 4s immediately after updating to 6.1.2. Not able to enable the phone wifi at all! Can anyone please help?

Receiving a message in my word document after converting from a PDF to word. Please advise

After converting and dowloading that converted file from a Adobe PDF file to a word document I then open the word document to see a message stateing
"To view the full contents of this document, you need a later version of the PDF viewer. You can upgrade to the latest version of Adobe Reader from www.adobe.com/products/acrobat/readstep2.html
For further support, go to www.adobe.com/support/products/acrreader.html"
Please proivde advise on how to sucessfully convert the Adobe PDF file to a word document.

Hi Buster,
The error message you were receiving occurs when you try to convert a dynamic PDF file created with Adobe LiveCycle Designer. This file is usually already a fillable form. Unfortunately there is no workaround available for converting documents like this within the ExportPDF service.
I'm sorry for the inconvenience.
Please let me know if you have any questions or if I can be of further assistance.
-David

Unnecessary text behind listbox after converting from a web-page

When I make convertation from htm-page containing listbox to pdf, there also appear text on the back of Listbox object. The strings are equal to Listbox values. If I create listbox manually, these strings not appear. How to fix this bug?

OK, I see now what you mean. It's been a while since I've web-captured an HTML form and I've never noticed that before. I don't think there's anything you can do to prevent it from happening though. You can change the color of the text so it's not visible, or remove it through redaction or other editing tools.

WLS 8.1 username/password on startup after converting from WLS 5.1

I have just converted weblogic.properties from a good installation under WLS 5.1
using WLS 8.1 tools.
The convertion appears to be successful but on startup WLS 8.1 requests a username
and password and none of the combinations I have tried so far worked. They all
lead to a message similar to:
The WebLogic Server did not start up properly
Reason: weblogic.security.SecurityInitializationException: Authentication for
user XXXX denied
The original weblogic.properties contained the following entry:
weblogic.password.system=weblogic
So, on startup I have tried username=system and password=weblogic but that didn't
work.
Any sound suggestions most welcome.
Thank you
Juan

Juan:
If you can't get it to boot, I am afraid you may have to "start" over. What
you can do is.
1) cd to a new directory
2) set your environment for 8.1
3) run "java weblogic.Server" answer prompts for user/pass
4) kill server
5) cp config.xml config.bak
6) copy in your 5.1 converted config.xml, make sure you remove/replace any
encrypted text password portions from your config.xml, putting inplain text
password values. When you boot the server it will reencrypt those sections.
*In general the conversion utility should just provide a guide, I really
think your better off starting a new domain and reconfiguring it "by hand"
with the console, jmx or by hand editing.
cheers
mbg
"Juan Jimenez" <[email protected]> wrote in message
news:[email protected]..
>
I have just converted weblogic.properties from a good installation underWLS 5.1
using WLS 8.1 tools.
The convertion appears to be successful but on startup WLS 8.1 requests ausername
and password and none of the combinations I have tried so far worked.They all
lead to a message similar to:
The WebLogic Server did not start up properly
Reason: weblogic.security.SecurityInitializationException: Authenticationfor
user XXXX denied
The original weblogic.properties contained the following entry:
weblogic.password.system=weblogic
So, on startup I have tried username=system and password=weblogic but thatdidn't
work.
Any sound suggestions most welcome.
Thank you
Juan

Converting from 2D to 3D not working for me

I am trying to follow the tutorial "Converting from 2D to 3D" and it is 'not working for me.' When I open the image 'archer...' I do not get layers, but only the background image, and consequently no 3DAxis widget appears.
This is my first try at this, and I am stuck trying to figure out what is wrong.
I am running Adobe Photoshop CS4 Extended, version 11.01 on Vista, with 4GB of RAM, 500GB HD
Processor speed 2200MHz
NVIDIA GeForce 7100
Memory available to PS 3255MB
Memory used by PS 70 percent
If anybody could please point me in the right direction, I would greatly appreciate it!
christian

it can work with the Background layer just fine, go to 3d->New Shape from Layer->Cone (or whatever) and then select one of the 3D tools and it should appear. Note though that OpenGL drawing must be enabled in Edit->Preferences->Performance to be able to see it.
Using the 3D Axis: http://help.adobe.com/en_US/Photoshop/11.0/WS0FB519CE-94B2-44d0-AFBE-7227747D20B9.html

Coding with Vector file, Convert from PSD to AI or Start over from Scratch?

I have an App developer that is requesting an .AI file for developing an App that can be utilized on all the following Apple hardware (iPhone 4, iPhone 5, iPod touch, iPad, iPad mini). He is insisting on it, because of the vector file. I have a design file that was completed in a layerd PSD. I want to know what, if any, quality is lost from converting from PSD to .AI vector file? Would it be better to have the Designers strach over from Scratch? Please Advise!
Thanks for your help

Depends on what type of layers are in the .psd. Certain layers type can convert to vector quality (shape layers, type layers, smart objects).
You also should ask the devloper about bitmnapped effects (eg: drop shadow) and placed images, if they are ok to use.

Hyper-V: after convert from physical to virtual not start

Similar Messages

Maybe you are looking for