Hyper-V can't create a network switch in Windows 8 enterprise evaluation

Hello
I have a problem with creating a new virtual network switch in windows 8.
it's the error:
[Window Title]
Virtual Switch Manager for HYPER-VISOR
[Main Instruction]
Error applying Virtual Switch Properties changes
[Content]
Failed while creating virtual Ethernet switch.
[Close]

Hi,
If you are using Wireless network adapters.
Virtual switches can only be created that are bound to wired NIC's
Best regards,

Similar Messages

Wifi Bug - Can't create a network

Installed Snow leopard, upgrade to 10.6.2, Airport client 2009-002.
Can't create a network thru airport menu

Try a new post in the 10.6 Networking forum.
DALE

Can I create a network for printing & music alone ?

I don't have DSL or any type of broadband - still using dial up.
If I buy an Airport Express can I configure it to wirelessly print and stream music or do I need a wireless network in the background to make this work ?

Can I create a network for printing & music alone ?
Yes
If you also want internet access at the same time you will need to tweak things a bit.

Can't create Local Network Users in Yosemite

I can't create Local Network Users (or change passwords)
Logged on to /LDAPv3/127.0.0.1 as directory administrator
When I try to create a new user (press the [+], fill in the form), it brings up the message:
existing connection is not authenticated or secure: password change denied
I suspect this is emblematic of other issues. I can authenticate for Mail and SMB, but not for AFP or Xcode

So I had this problem last night as well when I upgraded my 10.9.5 OD master to 10.10.
Two obvious problems after that upgrade:
1) Could not add a new Local Network User
2) Existing users could not connect via AFP (but could via SMB)
Through a series of trial and error (and with two Apple Support people...), we found that the following actions seemed to help fix some (but not all) of the problems.:
Problem #2 seemed to initially be fixed by archiving the OD Master, destroying the OD Master and then reimporting from the archive. I archived from the upgraded 10.10, but should probably have tried restoring my 10.9.5 archive (which may end up being why I still have some problems...)
Problem #1 seemed to be solved when I used WorkGroup Manager to reset the password on the Directory Administrator account I use (I also blew out all references to that account from the Keychain, so everything reprompted me to add that password
However, we think the root cause of this might have been that in /var/db/openldap/migration, the following "dot" files were still present after the upgrade
fs:migration root# ls -la
total 6308816
drwx------ 10 root wheel         340 Oct 30 18:59 .
drwxr-xr-x   6 root wheel         204 Oct 30 18:57 ..
-rw-------   1 root wheel           0 Oct 30 18:59 .autossl
-rw-------   1 root wheel           0 Oct 30 18:59 .enableODProxyd
-rw-------   1 root wheel           0 Oct 30 18:59 .rekerberize
-rw-------   1 root wheel           0 Oct 30 18:59 .updateLocales
-rw-r--r--   1 root wheel      333436 Oct 30 18:57 authbackup.ldif
-rw-r--r--@ 1 root wheel      617453 Oct 30 18:57 backup.ldif
-rw-r--r--   1 root wheel      617453 Oct 30 18:57 backup.ldif.backup
-rw-r--r--   1 root wheel 3228537344 Oct 30 18:59 oldsystem.tar
Those 4 .dot files were *not* present in that directory on the two other test OD Master servers that I upgraded without issue.
So we removed them and after having done all the above as well -- I can now add users to the server.   The OD engineer I talked to thought that the presence of those .dot files may have been triggering something to rerun every time PasswordService launched.
When all was said and done, I was then able to "kinit <mydiradminaccount>" correctly and get a "klist" without issue.
ALL THAT SAID: As of this morning, *some* (most? I don't know yet) of my existing OD user accounts are able to successfully log into the server.   A couple of them (so far) are reporting that their account is "disabled" (which is different from the "shaking"/can't-log-in behavior) -- but they can still log in via SMB -- so I think there was still a problem migrating OD accounts in the upgrade process.
AND -- I noticed that -- in Server 4.0 -- "change password" is greyed out, so I have to use WorkGroup Manager to change server account passwords.
Whee...

How can I create a text pop up window in my Pages document? I want text to pop up when the reader hovers his/her cursor over a certain word.

How can I create a text pop up window in my Pages document? I want text to pop up when the reader hovers his/her cursor over a certain word in the document. I am teacher. So for example when a student came to word he/she did not know, if he/she hovered the cursor over the word, a defintion or other information would appear. You can do this in Word using bookmarks/hyperlinks but I can't figure this out in Pages. I can link it to another point in my Pages document but I just need the text to pop up - not take the reader to another location. THANK YOU!!!!!!

Have you tried Word for Mac?
You will need to test if links survive export or printing to .pdf
Peter

How can I create more than one main window in a page of SAP SCRIPT?

How can I create more than one main window in a page of SAP SCRIPT? If anybody helps me I will be obliged.
Regards,
Subhasish

Hi Ganguly,
It is possible to have more than one main window in a same page.
You create a main window and simply you copy and past it in the same page.. it will create first main window name as MAIN and other main windows as MAIN01,MAIN02.... up to MAIN99.
Contets flow from MAIN , MAIN01, MAIN02.......................MAIN99. contents after filling the current window it flows to next window(by default, you skip as well with some keyword not sure could be NEW-WINDOW)
you want print the main window data twice? or you want to create two main window in the same page ?
1. give two copies in the no of copies in the output type screen ( Which pop up is coming after excute the program ).
2. create two page with the same script form.
3. you can write the coding inside the program to print twice the same page.
Hope this information use full to you..

In smart form, can i create more than one main window,

In smart form, can i create more than one main window,
if no, then why?

Hi,
As for main window a page can have only one.
You may have number of Variable windows
Main window can only be one. One it can be copied to next page.
but secondary window as many as u want.
Reward if it helps..
Regards,
Omkar.

HT4436 can i create an icloud acct on windows

can i create an icloud acct. from windows using my apple id?

Welcome to the Apple Support Communities
You can only create an iCloud account on a iPhone, iPad, iPod touch or Mac, not on a PC. See > http://www.apple.com/icloud/setup

Windows can't create a network map/appearance of B...

Hi
I have had BT infinity for somewhat over a month now without any problems, until yesterday. That I am aware of two things have changed but in what order they changed I do not know.
'Firstly' I connected a brand new but several years old i.e. unused, LG 1T network drive and tried to get through the software installation process without success (can't create acceptable login details ). However I could see etc. the drive if I typed its network address into a browser's address window. BUT at that point the Windows network map started breaking. That was yesterday and I have, for the moment, removed the drive and deleted its info from the Homehub 5b.
Today I noticed that two new wireless networks have appeared, BTWifi-X and BTWifi-with-Fon. These appear and disappear as and when my homehub is switched on and off and, given what I have read, I assume these are the hotspot networks I am providing.
If I have my laptop connected to the homehub via LAN, Windows can create a network map providing no other computer is connected via WAN. Conversely when any computer is simultaneously connected to the homehub via WAN Windows loses the ability to create a network map, this includes the situation where one computer is connected via WAN and LAN. I often use my employer's WAN when at work and frequently forget to switch the WAN off, meaning that when I come home the laptop is initially often connected via WAN and LAN. That I am aware of, Windows has not previously had a problem creating a network map when this has happened.
There does not seem to be a problem if my phone (android) is connected to the homehub via WAN or if I have two computers connected to the homehub via only WAN nor if two computers are connected to the home hub via only LAN
One other thing I have also noticed is that the network map, when created, seems to contain, at times, a switch, a hub, Homehub5 and BThub5**** as if there a multitude of connectors.
I would like to get back the ability for windows to create network maps whatever connections are made.
Any suggestions?
Thanks

Claybourne wrote:
Hi
I have had BT infinity for somewhat over a month now without any problems, until yesterday.
That I am aware of two things have changed but in what order they changed I do not know.
'Firstly' I connected a brand new but several years old i.e. unused, LG 1T network drive and tried to get through the software installation process without success (can't create acceptable login details ). However I could see etc. the drive if I typed its network address into a browser's address window. BUT at that point the Windows network map started breaking. That was yesterday and I have, for the moment, removed the drive and deleted its info from the Homehub 5b.
Today I noticed that two new wireless networks have appeared, BTWifi-X and BTWifi-with-Fon. These appear and disappear as and when my homehub is switched on and off and, given what I have read, I assume these are the hotspot networks I am providing.
If I have my laptop connected to the homehub via LAN, Windows can create a network map providing no other computer is connected via WAN. Conversely when any computer is simultaneously connected to the homehub via WAN Windows loses the ability to create a network map, this includes the situation where one computer is connected via WAN and LAN.
I often use my employer's WAN when at work and frequently forget to switch the WAN off, meaning that when I come home the laptop is initially often connected via WAN and LAN. That I am aware of, Windows has not previously had a problem creating a network map when this has happened.
There does not seem to be a problem if my phone (android) is connected to the homehub via WAN or if I have two computers connected to the homehub via only WAN nor if two computers are connected to the home hub via only LAN
One other thing I have also noticed is that the network map, when created, seems to contain, at times, a switch, a hub, Homehub5 and BThub5**** as if there a multitude of connectors.
I would like to get back the ability for windows to create network maps whatever connections are made.
Any suggestions?
Thanks
You seem to be using WAN to mean a Wireless connection when it means something else. Is this correct.
Your HH 5 B should provide a better network map than windows. Do you know how to log into your Home Hub Manager to get this and other information ?
Have you set up your HH 5 B as recommended in this forum ?

Windows 8.1 Pro - Hyper-V Can I create a shareable disk?

I am using Windows 8.1 Pro with Hyper-V. Can I use a Synology NAS and create iSCSI LUNs which are shared between TWO virtual machines (running Linux) - a shareable disk.
Or is this possible only in Windows 2012 Server?
Thanks

Hi,
"Shared virtual hard disks are only available in Windows Server 2012 R2."
http://technet.microsoft.com/en-us/library/dn281956.aspx
http://technet.microsoft.com/en-us/library/dn265972.aspx#BKMK_SharedVHDX
Hope that helps
Regards
Sebastian

Can I create a network object from CIDR format or do I need to use IP - netmask?

Have a cisco ASA running ASA V 8.3
Wondering what the correct syntax is or even if it is possible to create a network object from a list of IP's in CIDR format?
Typically just do this:
Create network-object
object-group network name
network-object 1.2.3.0 255.255.255.0
Would like to do this:
network-object 1.2.3.0/24
thanks!

Hi,
As far as I know the ASA does not support entering a network/subnet mask in such format in any of its configurations.
- Jouni

Airport has stopped working -- Now Can't Create a Network

We're using a wireless router (not an Apple AirPort router) to connect to the internet. We've had connections before, but now this has simply stopped working.
In the past, I've solved this problem by just creating a new network and connecting to that. That seemed to get the connection back.
Now, I create a network in Preferences > Network > Airport, but it doesn't show up in Internet Connect > Airport, or under the Airport in the menu bar.
When I try to connect to it using "Other" I get the message "There was an error connecting to the network XXXXX".
When I click on "Create Network" in Internet connect, it only gives me an option to create a computer-to-computer network.
Ethernet connection works fine. This is on a PB 12" / 10.4.11
Any suggestions most welcome.

Reset the printer back to Factory Defaults and check the wireless radio again. It needs to be enabled.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

I can not map a network drive in window 8.1 under VPN

Dear sir / madam,
I face a big problem. My company use VPN Connection. After my company upgrade the window from Window 7 to Window8.1 , we find that we can not reconnect the network drive. please find the details below:
1. I success to map drive and then logout / switch user.
2. wait two /three hours
3. i find the drive is disconnected.
4. when I try to reconnect, window can not find again. then I try to use netstat
C:\Windows\system32>netstat
TCP 172.28.97.31:58206 test-server:http TIME_WAIT
Then, i try to use cmd , net use /delete and then try to reconnect test-server
5 it show reconnect successful by net use command. However , I need waste many time and I can not find the drive in window.
if I restart window, i can reconnect it quickly and find the drive in window.
the server are window server 2008 r2 and server 2012, they located at difference site.
if the server and PC located at same site, it is no problem.
both the server and PC are joined in same domain.
it is dell server and Lenovo M82 PC( Intel Lan 82579LM/V Driver)
please help me to solve the problem
(window 7 also have this problem. However, i can click the drive and it can reconnect quictly.i cannot do this in window 8.1.......it loop again)
thanks

Hi,
How did you map the network drive? Manually via GUI? Command? GPP? If you're using one of the above solutions, then try other solutions as a alternative way to check the result.
According to your description, If Windows remains unable to reconnect mapped Network Drive at login, then I would suggest you created a batch file with net use command, use it as an logon script, this provides an alternate way to reconnect drives on
a re-logon.
example
@echo off
net use * /delete /yes
net use x: \\server_name\shared_directory_name
You can find detailed information in the following link
https://helpdesk.egnyte.com/hc/en-us/articles/201638304-Mapping-a-drive-using-a-net-use-command-and-logon-scripts-for-domain-users
http://technet.microsoft.com/en-us/library/bb490717.aspx
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Yolanda Zhu
TechNet Community Support

I can not map a network drive in window 8.1 via VPN

Dear sir / madam,
I face a big problem. My company use VPN Connection. After my company upgrade the window from Window 7 to Window8.1 , we find that we can not reconnect the network drive. please find the details below:
1. I success to map drive and then logout / switch user.
2. wait two /three hours
3. i find the drive is disconnected.
4. when I try to reconnect, window can not find again. then I try to use netstat
C:\Windows\system32>netstat
TCP 172.28.97.31:58206 test-server:http TIME_WAIT
Then, i try to use cmd
5 it show reconnect successful by net use command. However , I need waste many time and I can not find the drive in window.
if I restart window, i can reconnect it quickly and find the drive in window.
the server is window server 2008 r2 and located at difference site.
if the server and PC located at same site, it is no problem.
both the server and PC are joined in same domain.
it is dell server and Lenovo M82 PC
please help me to solve the problem
(window 7 also have this problem. However, i can click the drive and it can reconnect quictly.i cannot do this in window 8.1.......it loop again)
thanks

Hi,
Is there any error message throwed when you reconnect the mapped drive? Can you directly access the UNC path of the mapped drive? What VPN programs do you use? Please check if the VPN client connect correctly.
You could refer to the thread below to check if the AD account is restricted by VPN.
Can't access mapped drives through VPN when away from office
http://social.technet.microsoft.com/Forums/windows/en-US/a0ca41aa-08b8-4e46-a314-ffb7e401bd7a/cant-access-mapped-drives-through-vpn-when-away-from-office?forum=w7itpronetworking
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Can't create a function in SQL windows of PL/SQL Developer.

The function is :
create or replace function Xgyh
(pvc2Czy in varchar2,
pnumYhid in number,
pvc2Lfid in varchar2,
pvc2Grzid in varchar2,
pvc2Zbmid in varchar2,
pvc2Bmid in varchar2)
return number is
intZxbz integer:=1;--返回值(1:正确，0:错误);
numDxlb number;
numGx number;
begin
--判断指定用户是否合法
if pvc2Czy is null then
intZxbz:=0;
end if;
if pnumYhid is not null then
if pvc2Lfid+pvc2Grzid+pvc2Zbmid+pvc2Bmid is null then
intZxbz:=0;
end if;
elsif pvc2Lfid is not null then
if pvc2Grzid+pvc2Zbmid+pvc2Bmid is null then
intZxbz:=0;
end if;
elsif pvc2Grzid is not null then
if pvc2Zbmid+pvc2Bmid is null then
intZxbz:=0;
end if;
elsif pvc2Zbmid is not null then
if pvc2Bmid is null then
intZxbz:=0;
end if;
elsif pvc2Bmid is null then
intZxbz:=0;
end if;
--取当前登陆操作员在数据权限表中权限并判断是否允许更新当前用户
if intZxbz=1 then
select t.更新,
decode(t.对象类别,'用户',0,'楼房',1,'供热站',2,'子部门',3,'部门',4,'集团',5)
into numGx,numDxlb
from 系统_数据权限_表 t
where t.用户=pvc2Czy
and (t.对象类别,t.对象识别码) in
(('集团',0),('部门',pvc2Bmid),('子部门',pvc2Zbmid),('供热站',pvc2Grzid),('楼房',pvc2Lfid),('用户',pnumYhid))
and rownum=1
order by 2,1;
end if;
--返回信息
return(numGx);
end Xgyh;
If get rid of the where condition
'and (t.对象类别,t.对象识别码) in
(('集团',0),('部门',pvc2Bmid),('子部门',pvc2Zbmid),('供热站',pvc2Grzid),('楼房',pvc2Lfid),('用户',pnumYhid))',
this function can be created fast.
Thanks for you help!

This is duplicated question.
Can't create a function in database
William Robertson and I have described some advices for you.
Is my English poor?
If you couldn't get theirs (mikerault, William Robertson et al.) and my advices,
You can ask that on ITPUB (this is Chinese site).
Here it is. http://www.itpub.net/
And this site is not only for Oracle.
I think they can help you in Chinese words.
PS.
I learn that
'Gongrezhan' means the center of supplying heating to building,
and this center is the characteristic systems in Beijing or more cold district.
PS.2
Your script includes simplified Chinese character-set.
Even if you were not Chinese person,
we all think you can understand Chinese words.

Hyper-V can't create a network switch in Windows 8 enterprise evaluation

Similar Messages

Maybe you are looking for