Hyper-V creating external Vswitch disconnects from host
Hello,
I have a Windows 2012 R2 Server running HyperV. The moment i create a external Vswitch from the Virtual Switch Manager, i loose connectivity from the host machine. I then have to manually go back and delete the vswitch to have connectivity again. Is
this a bug ? Couldnt find any hot fix for it. What am i missing ? The network connection for the vswitch is out of a DHCP scope block.
Hi Neeraj,
This is by default. When you are creating vswitch, it gives a message that your host will be disconnected. Basically, it binds to a physical NIC and creates a vNIC in your host server. When this is done, it removes the IP address which you had set on
physical NIC. You need to connect it via ILO or some other method, then perform this task. Also you need to assign IP to vNIC after creating vswitch.
Thanks,
Umesh.S.K
Similar Messages
-
Creating external boot disk from an earlier time?
I've put a lot of progs on my MBP. No probs with that, but for my work, should it ever go down, I'd like to have a boot-able external drive with only the progs I need at the time so I can be back up and running asap. (Yes, I know I should have thought of this earlier.)
I could uninstall all the new stuff, create a boota-ble drive, then re-install...
but I don't want to.
So is there a way to create a boot-able drive from an earlier time using TM? so that, for instance, it could boot up to what it used to be a month ago? In theory all the data is there in TM to do just that...
or
Here's a workaround: Can I take the MBP to a month ago and create a boot-able drive, then use TM to come back to the present?Karel Bata wrote:
So is there a way to create a boot-able drive from an earlier time using TM?
Try restoring from the previous TM backup to a clean disk or partition. Then use SuperDuper or CarbonCopy Cloner to create a bootable clone.
-mj -
Secure External HDD disconnects from computer
I have just bought an external secure thinkpad USB 3.0 HD. I am using Windows 8.1
I am having problems as the drive will not stay connected. Every few minutes it will simply disconnect. I have made the power adjustments suggested in blogs but no luck. sometimes when disconnected the HD will simply click away making me wonder if it is faulty. To reconnect I must pull out the USB and put in passworkd
At the moment the drive is basically unusable. (aghhhhhhhh!!!)
Has anyone had similar problems and was there a cure
thanksI have just bought an external secure thinkpad USB 3.0 HD. I am using Windows 8.1
I am having problems as the drive will not stay connected. Every few minutes it will simply disconnect. I have made the power adjustments suggested in blogs but no luck. sometimes when disconnected the HD will simply click away making me wonder if it is faulty. To reconnect I must pull out the USB and put in passworkd
At the moment the drive is basically unusable. (aghhhhhhhh!!!)
Has anyone had similar problems and was there a cure
thanks -
How to create External Hard Drive from Internal Hard Drive?
For my Mac, I want to get a 250GB external Firewire Hard Drive. I know I can purchase one as is. However, it seems that money can be saved by purchasing an internal hard drive and a hard drive enclosure. Is this correct?
If so, would the internal hard drive be an IDE?
Is there an enclosure that will make this IDE drive a Firewire/USB external drive?
Should the enclosure have a fan, on/off button?
Anything else to consider.
Thanks,
HerschelHi Hershel.
1) If you want to use the drive with both your PC and your Mac then you have two options. Either you format the drive in FAT32 (standard windows format) or you get hold of one of the utilities which allows you to read Mac HFS+ formatted disks on a PC (IMHO the better way to go). One disadvantage of using Fat 32 formatting for the drive is that you then won't actually be able to use it as an emergency "startup disk" for the Mac . The other problem is that Fat 32 can be problematic with large disks and files sometimes.
2) Your iMac has both USB2 ports and firewire 400 ports. There is no advantage really in getting an enclosure with Firewire 800 , because your iMac is limited to Firewire 400 anyway. The drive you buy to insert in the enclosure won't have any effect on this.
3) The reasons for getting a firewire capable enclosure for use with your Mac are that it is actually faster than USB2 (despite the higher rated speed of USB2) and because you can start up your Mac from an external FW drive, but not from an external USB2 drive. If you are formatting in Fat32 this won't be an issue because you won't be able to boot from it anyway.
4) The business about "parallel" and "serial" drives relates to the type of bridge in the enclosure that you buy, not to whether you want to connect it to a PC or a mac. Some enclosures are designed to work with "SATA" drives - ie Serial. Some are designed to work with "regular" IDE / ATA drives (ie parallel).
Just to make this clearer , think about this as involving two links in a chain. THe first link is from the drive to the enclosure. The enclosure needs to have the right sort of INTERNAL connection for the drive you buy - either SATA or regular ATA - regular ATA enclosures are more common than SATA one but large drives are now easier to find with SATA interfaces than IDE ATA. A few enclosures can accept either type of drive,but they tend to cost more.
The second link is the EXTERNAL one from the enclosure to your computer. In your situation it sounds as if you ideally need one which has both Firewire 400 and USB2 connections. (THere are also some cases which provide am external SATA connection for connection to the computer, but you wouldn't be able to use this with your iMac as it has no external SATA port).
Try a Google for the IceCube Pleiades and you should be able to come up with prices in a place somewhere near you. At present I'm not sure which country you are in.
Cheers
Rod -
How can I edit lightroom 5 smart previews on mac book pro (mbp) when the lightroom 5 master image files are on my external hard drive is disconnected from the mbp? So far when I try to disconnect the external HD from the mbp, I get the following pop up window: The disk "external hard drive A" couldn't be ejected because "Lightroom" is using it. Quit that application and try to eject this disk again. When I do that and restart Lightroom 5, the Adobe Photoshop Lightroom - Select Catalog screen pops up but doesn't list my external hard drive A as a choice.
I've reviewed Adobe's Lightroom Help | Smart Previews Lightroom 5 web page and still haven't been able to figure what I'm doing wrong. Any help would be appreciated.Your internal HDD. by default, is named 'Macintosh HD'. From what information you supplied, it looks like there is already a Lightroom catalog installed on you local (internal) HDD using the standard naming convention Adobe uses as well as a Lightroom catalog on your external drive which you created. To be sure of which catalog Lightroom is loading when it starts up, To do this, start Lightroom as you normally would. After it starts, select the Lightroom menu item, then select the Catalog Preferences item and finally, navigate to the General tab. The Location information will tell you exactly what catalog Lightroom is opening by default. This will likely be the Photography Mac Book Pro Versions catalog on your external HDD. Once that is confirmed, you are ready to proceed. As an additional test/verification, you can shut down Lightroom and, this time, start Lightroom while holding down the ALT/OPTION key. This will cause Lightroom to pause and display a screen which will allow you to chose a different catalog to open. Navigate to the /Users/[user name]/Pictures/Lightroom folder and select the Lightroom 5 Catalog.lrcat file. When Lightroom comes up, there should be no previews or folders as this catalog should be empty. Now you can be certain which catalog is being used and which catalog has all your data and you are ready to migrate your current catalog. Shut down Lightroom.
To migrate your current catalog, use Finder to locate your Photography Mac Book Pro Versions folder on your external drive. Select the folder and select COPY from the context menu. Next, use Finder to navigate to the /Users/[user name]/Pictures/Lightroom folder on you internal HDD. You can start at the Macintosh HD level and work your way down by opening each level (Macintosh HD/Users/[user name]/Pictures). Select the /Pictures folder and then select PASTE... from the context menu. When the COPY/PASTE is complete, you should see the following files on the Macintosh HD:
Macintosh HD/Users/[user name]/Pictures/Lightroom/ and
Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions
The Macintosh HD/Users/[user name]/Pictures/Lightroom folder will contain the empty default catalog the Adobe created when Lightroom was installed and Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions will contain a copy of the catalog you created on your external HDD.
You are almost done now. Make sure your external drive is still attached for this step. Restart Lightroom using the ALT/OPTION key again. When the Select Catalog screen appears, select the Choose a Different Catalog button (lower left side). When you do, a Finder window will open to allow you to navigate to a catalog of your choosing. Navigate to Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions and select the file Photography Mac Book Pro Version.lrcat. This is the copy you just created. Select the Open button and Lightroom should start. You should see all of your previews and settings just as before. Also, in the left hand panel, all of your folder should show up and none of them should be dimmed and none of your previews should display a small exclamation point badge. Either a dimmed folder name or an exclamation point badge indicates that Lightroom can't find the associated image file. If everything looks good, go to the Lightroom menu, select Preferences and then select the General tab. Under Default Catalog, select an option to either load the LAST catalog opened or select the Users/[user name]/Pictures/Photography Mac Book Pro Versions catalog from the drop down. Shut down Lightroom and then restart it normally. This time, when Lightroom starts, you should be viewing the new copy of your catalog. You can confirm this by looking at the General tab on the Catalog Preferences screen (Lightroom/Catalog Preferences menu items). Shut down Lightroom once again and this time, eject your external drive before restarting. This time, your folders in the left hand panel will be dimmed but you should be able to work with your smart previews. If Lightroom should display a Select Catalog screen with the external drive detached, double check your settings as it indicates Lightroom is still looking at the copy of the catalog on the external drive rather than the new copy you made.
Finally, if you are seeing dimmed folders and/or exclamation point badges with the external drive attached, this indicates a problem. You can select any folder and select Update Folder Location from the context menu. This will allow you to navigate to the copy on the external drive and select it. Lightroom will then update the catalog (select to synchronize the content). This will not only clear the dimmed folder problem but also remove the exclamation point badges for all photos in that missing folder. However, it may indicate that not all went well with the copy of the catalog so make sure to verify all went well. You can use the Get Info option on the two folders. You should see the same number of files/folders for both the copy on the internal drive as well as on the external drive but you can't rely on the byte count because of the possibility of differences between the geometry of the two drives. Hope this all helps! -
I have a user working on a MacBook Pro, Lion OS X 10.8.2, connected to an external display. When disconnecting from the external display the background picture changes, he can’t open documents saved to desktop, and the connection to the server shares is lost. Rebooting does not resolve the issue while it is disconnected from the external display. If he reconnects the MacBook back to the external monitor sometimes he has to reboot to get everything back to normal. It almost seems like it is logging him into a different account or profile or something like that (please excuse my messy terminology as most of our users are still using PCs). However if you look at what account is logged in, it is still the same account that he logged in with that morning. The Mac is not authenticating to the network, just connecting to server shares. Has anyone experienced this issue before and if so is there a fix for it?
The Mac has a long history of assuming that ANY adapter still present means the display is still present -- you need to remove the adapter as well as the cable, if present.
So my theory articulated above is that the disconnect is not registered correctly. This would mean that the second display is still seen as present. You could check this by invoking:
System Preferences > Displays ...
and looking for the Arrange pane (shown above) which is ONLY present when multiple displays are attached. More detailed information can be found in About this Mac > ( More info ) Graphics & Displays ...
... specifically the NAME of each attached display is shown or an indication (no display connected):
ATI Radeon HD 4870:
Chipset Model: ATI Radeon HD 4870
Type: GPU
Bus: PCIe
Slot: Slot-1
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: ATI (0x1002)
Device ID: 0x9440
Revision ID: 0x0000
ROM Revision: 113-B7710C-176
EFI Driver Version: 01.00.318
Displays:
Cinema HD:
Resolution: 2560 x 1600
Pixel Depth: 32-Bit Color (ARGB8888)
Display Serial Number: CY8360UFXMP
Main Display: Yes
Mirror: Off
Online: Yes
Rotation: Supported
Display Connector:
Status: No Display Connected -
Hello All,
we have created shared folder on multiple client machine in domain environment on different 2 OS like-XP,Vista, etc.
from some day's When we facing problem when we are access from host name that shared folder is accessible but same time same computer when we are trying to access the share folder with IP it asking for credentials i have type again and again
correct credential but unable to access that. If i re-share the folder then we are access it but when we are restarted the system then same problem is occurring.
I have checked IP,DNS,Gateway and more each & everything is well.
Pls suggest us.
Pankaj KumarHi,
According to your description, my understanding is that the same shared folder can be accessed by name, but can’t be accessed be IP address and asks for credentials.
Please try to enable the option below on the device which has shared folder:
Besides, check the Advanced Shring settings of shared folder and confrim that if there is any limitation settings.
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Creating external table - from a file with multiple field separators
I need to create an external table from a flat file containing multiple field separators (",", ";" and "|").
Is there any way to specifiy this in the CREATE TABLE (external) statement?
FIELDS TERMINATED BY "," -- Somehow list more than just comma here?
We receive the file from a vendor every week. I am trying to set up a process for some non-technical users, and I want to keep this process transparent to them and not require them to load the data into Oracle.
I'd appreciate your help!scott@ORA92> CREATE OR REPLACE DIRECTORY my_dir AS 'c:\oracle'
2 /
Directory created.
scott@ORA92> CREATE TABLE external_table
2 (COL1 NUMBER,
3 COL2 VARCHAR2(6),
4 COL3 VARCHAR2(6),
5 COL4 VARCHAR2(6),
6 COL5 VARCHAR2(6))
7 ORGANIZATION external
8 (TYPE oracle_loader
9 DEFAULT DIRECTORY my_dir
10 ACCESS PARAMETERS
11 (FIELDS
12 (COL1 CHAR(255)
13 TERMINATED BY "|",
14 COL2 CHAR(255)
15 TERMINATED BY ",",
16 COL3 CHAR(255)
17 TERMINATED BY ";",
18 COL4 CHAR(255)
19 TERMINATED BY ",",
20 COL5 CHAR(255)
21 TERMINATED BY ","))
22 location ('flat_file.txt'))
23 /
Table created.
scott@ORA92> select * from external_table
2 /
COL1 COL2 COL3 COL4 COL5
1 Field1 Field2 Field3 Field4
2 Field1 Field2 Field3 Field4
scott@ORA92> -
Not able to create Oracle External Procedure to Run Host Commands
Trying to follow this article
http://timarcher.com/node/9
Its related to
Oracle External Procedure to Run Host Commands
steps
1)mkdir –p /u01/app/usfapp/oracle_external_procs/oracle_host
2)
Author is suggesting to create a file
but header file is missing in very first line... may be not sure..say it is <stdio.h>Create a file named oracle_host.c. The contents of this file will be:
#include
int RunCmd(char *cmd)
return(system(cmd));
4) Create the file named makefile. The contents of this file will be:
oracle_host: oracle_host.o
gcc -shared -o oracle_host.so oracle_host.o
$ cat makefile
oracle_host: oracle_host.o
gcc -shared -o oracle_host.so oracle_host.o
5)
Now run the command make
The output on my server looks like:
[u01/app/usfapp/oracle_external_procs/oracle_host]
banner@usfbannerte [TRNG] > make
gcc -shared -o oracle_host.so oracle_host.o
here I stuck .. Not able to run this step ]$ make
gcc -shared -o oracle_host.so oracle_host.o
/usr/bin/ld: oracle_host.o: relocation R_X86_64_32 against `a local symbol' can not be used when making a shared object; recompile with -fPIC
oracle_host.o: could not read symbols: Bad value
collect2: ld returned 1 exit status
make: *** [oracle_host] Error 1
Any one has any idea what went wrong
Any other link related to this is most welcomed.
Please suggest ...hi
please update
or
provide any other link / document for
Oracle External Procedure to Run Host Commands
--using c
Thanks in advance. -
Hi Experts,
I have requirement to create custom business object and create Web Service for that and use in external system (SAP ECC / SAP CRM / Third Party).
1) Is it possible to create custom object web service and used in external system ?
2) When we create the Web service from custom business object what the necessary steps(action : Create , Read , Update) require?
3) Sample Scenario :
My Custom Business Object
businessobject Custom_Integration {
element EP_VAL1 : LANGUAGEINDEPENDENT_MEDIUM_Text;
element EP_VAL2 : LANGUAGEINDEPENDENT_MEDIUM_Text;
element IP_RES : LANGUAGEINDEPENDENT_MEDIUM_Text;
I have created the Web Service using this custom business object.
3) How i can use this web service in external system? what are the prerequisite steps in external system to consume this service in it?
Please anyone have idea about this how to do this and how to achieve this using SDK and custom business object.
Many Thanks
MithunHello Mithun,
Does this section in the documentation help you:
SAP Cloud Applications Studio Help -> Developers Desktop -> Web Services
The entry "Task -> Create a Web Service" describes how to create a Web Service on your own BO
The entry "Task -> Test a Web Service" helps you how you can use it in a foreign tool / application.
HTH,
Horst -
IPhone disconnects from my Windows laptop when i'm trying to create a backup
Not shure if this is the right cathegory to post this question in, but here i go anyways
So, i wanted to create a backup for my iPhone on my Windows 8.1 computer, and i firs had some problems with the "Apple Mobile Device Service", but when i finally fixed that problem, and when i finally where ready to make a backup to my computer, it started, lasted for around 10 secounds, beafore the iPone was disconnected from my computer. I have already tried to use a different usb adapter, but this didn't solve my problem,..
Any ideas where my problem is hiding?Hi Veselorjan,
Yes, I did see that information in your initial post. Have you gone through the troubleshooting in the article I provided? There are additional steps aside from trying another USB port and updating iTunes.
Check connections
Try these steps to check the connection between your device or computer. You might need to do only one of these steps to resolve the issue, so test your connection after each step.
See if the cable connection at the device or computer has come loose or unplugged.
Unplug the cable you're using to connect your iOS device from the USB port on your computer, and then reconnect it. Then unplug it from your iOS device, and reconnect it.
Remove any third-party battery packs or cases from the device and ensure that the USB cable is connected directly to the port on the device.
If your Lightning or 30-pin cable is connected to a keyboard, display or USB hub, try plugging it directly into a USB port on the computer instead.
Close any virtualization apps (such as Parallels or VMWare).
These apps might interfere with your computer's ability to communicate over USB if they aren't properly configured, or up to date. If this resolves the issue, contact the developer of the app to see if an update is available.
Restart your computer.
Restart your iPhone, iPad, or iPod touch.
Check for software updates. You can download the latest version of iTunes from Apple. If you're using a Mac, you can check for updates to OS X and other software using the Mac App Store.
If you're using a non-Apple computer, check for firmware updates for your computer or USB card from the manufacturer's website.
If your iOS device displays the Connect to iTunes screen, reset your device and then restore it.
If you're using an accessory or third-party cable to connect your device, try using an Apple cable with the device instead.
Disconnect other USB devices from your computer, except for your keyboard and mouse. Then, reconnect your iOS device. If the issue is resolved, reconnect the other USB devices one at a time. Make sure your iOS device is still recognized by the computer after adding back each device.
If one of these steps resolves the issue, but it comes back later, make sure you haven't changed how the device is connected. For example, check to see if you plugged the device into a specific accessory, or used a specific cable that reintroduced the issue.
Resolve USB-related alerts in iTunes - Apple Support
Take care,
Alex H. -
Is it possible to invoke an external REST web-service hosted in WebLogic web application from an Adobe LiveCycle Process (ES-4) with parameters as input and manipulating the response depending on the type of parameters it gets back. Then invoking an Adobe Form and prepopulating the Form based on the response parameters? Do you have sample projects that do this invocation. The part highlighted in red is what I need examples.
You can simply use "Execute Script" operation in Workbench and make use of java.net.URL. Below links should help :
http://www.mkyong.com/webservices/jax-rs/restfull-java-client-with-java-net-url/
http://www.adobe.com/devnet/livecycle/articles/building-xml.html
http://help.adobe.com/en_US/livecycle/9.0/workbenchHelp/help.htm?content=000581.html
Hope this helps.
-Wasil -
Why CompactRio always disconnect from my host after deployment?
I have the following program that I try to run as a real time program in the compactrio 9002:
The problem is that always that I try to run this program without any debugging tool the compactRio disconnects from my host and I have to reset it. But if I use the "HighLight Execution" tool it works perfectly (except for the fact that It is really slower) doesn't show any error.
Does anyone know what am I doing wrong?
Thanks in advance,
Tito Coutinho Melco.Welcome to the Apple Community.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment. -
MD3000 - Change Access From Host to Host-Group
I've got a Hyper-V partition on an MD3000 called "HyperV-CSV".
At present, in the "Host-to-Virtual Disk Mappings" it is only accessible by "Host HyperV1".
I'm trying to allow host HyperV2 access as well, and without causing problems. What I have done is created a Host Group called "HyperV-Group" where both HyperV1 and HyperV2 are members.
So what I think I need to do is change the access of the Virtual Disk from "Host HyperV1" to "Host Group HyperV-Group".
My questions though - will this disconnect the disk from HyperV1 briefly while making the change? Will this properly allow both HyperV1 and HyperV2 to access this virtual disk?
This topic first appeared in the Spiceworks CommunityHi AlexMtl,
It seems the host accesses internet via wifi ,right ?
The host still can access internet after removing bridge connection then reboot , right ?
If it is the case , please refer to following setps :
1. remove bridge from wifi then reboot it to ensure host can access internet
2. create a new internal virtual switch
3. share wifi connection to the new Vswitch (right click wifi connection --> properties --> sharing --> check "allow another network ..." and select the new internal Vswitch in the drop list)
4. configure an IP for the new Vswitch same subnet as VM's IP
5. configure VM's gateway same as the IP of new Vswitch (also configure the DNS server IP for VMs)
Hope this helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
No external network access from virtual machine
Hello:
I'm configuring a Windows Server 2012 Standard with Hyper-V and want to share a network card so that both the virtual machine and the host access a LAN using the same wire.
HOST SYSTEM:
OS: Windows Server 2012 Standard
IP: 192.168.50.1
VIRTUAL MACHINE: Windows XP
IP: 192.168.50.4
PHYSICAL SWITCH (CISCO):
IP: 192.168.50.6
I've configured an external virtual switch, assigned to it a physical card and activated the sharing between host and virtual machine.
With this configuration:
ping from HOST to VM and viceversa: OK
ping from HOST to REAL SWITCH: OK
ping from VM to REAL SWITCH: FAIL
If I configure the network card to work exclusively with the VM, it can access the external switch from the VM, but I lose any connection with the host.
I could solve the problem installing another physical card and using one for the host and one for the VM, but I can't get both working with the same card, even though they are in the same subnet, see each other, share files between VM and host... I'm not
trying to connect to the internet.
Any idea? Thanks.Hello again,
Sorry for the delay.
After system update, the problem has not been solved. The external switches do not limit the number of MACs, so this is not the problem either.
After updating the system I deleted the virtual switch and created it again. I also rebooted the VM and even the server. It just doesn't share the access: only the VM or the server can access to the net at the same time, even if both see each other all the
time (server and VM).
Apart from that, every time I delete the virtual switch and create a new one, I reconfigure the VM as well (I delete the network card at the VM and create it again). When I do that I have to assign an IP address to the network card in the VM (no DHCP
installed, so this is normal), but I can use the same IP I was using before deleting the virtual switch. When I do so, a message appears saying the IP is used in a virtual network adapter, but this is hidden because it is not in use anymore. I haven't found
a way to see and delete these hidden network adapters either.
I think I'll install VMWare, because Hyper-V is more a problem than a solution.
Maybe you are looking for
-
Having a Kernal process running. Computer seems to run OK but fan which almost never runs is on continuously for the past 3 days. 7/4/11 7:31:21 AM com.apple.launchd[1] (edu.mit.Kerberos.krb5kdc[707]) Exited with exit code: 1 7/4/1
-
(How do I/Can I) use this CD to install XP on my macbook?
Here's the CD in question: http://img227.imageshack.us/img227/1971/dellcdhv0.jpg Do I need Microsoft Virtual PC? Do I need BootCamp? Will my Dell reinstallation CD even work? Any help would be appreciated... MacBook Pro Mac OS X (10.4.7)
-
9.1.3 pretty much ruined (32/64 bit) Logic performance?
I've had a look around through some threads and it seems that a lot of people are having similar problems. Ever since updating to 9.1.3, Logic has gone horribly wrong, making the CPU spike for no reason, causing freezing on playback, random clicks an
-
Crash Reporter disabled by default?
For some weird reason, my crash reporter seems to be disabled globally in the OS. Is there at unix command I can use in the Terminal to verify Crash Reporter status/enable it?
-
NT 의 PERFORMANCE MONITOR 를 CHECK 하기
제품 : ORACLE SERVER 작성날짜 : 2003-11-27 NT 의 PERFORMANCE MONITOR 를 CHECK 하기 ======================================= PURPOSE NT의 performance MONITOR에서 ORACLE PERFORMANCE를 CHECK 하는 방법을 알아보자. Explanation NT 의 performance 에서 oracle 의 performance 도 check 가 가