Hyper-V encountered an error while Configuring the network on Vmachine
Hi all,
i am novice in window server 201, I learning from a ebook.While i doing the step of creating virtual machine , i got this error
Hyper-V encountered an error while configuring the network on Vmachine
Hyper-V encountered an error trying to access an object on computer 'localhost' because the object was not found. The object might have been deleted, or you might not have permission to perform the task. Verify that the virtual Machine Management service
on the computer is running. If the service is running,try to perform the task again by using Run as Administrator
Windows Server 201? Are you sure?
What sort of machine are you trying to install and run Hyper-V on? What OS is it running?
Bill
Similar Messages
-
Windows 8.1 Hyper-V - Error while configuring the hard disk 0xC03A0014
Hello. I have just enabled Hyper-V on my Windows 8.1 laptop.
Dell Latitude E7440 i7-4600U @ 2.10GHz
I can create a Virtual-Switch but I am unable to create a new Hard Disk or Virtual Machine within Hyper-V. I get the same error for both processes.
Error: The Virtual Machine Management Service encountered an error while configuring the hard disk on virtual machine New Virtual Machine.
Failed to create the virtual hard disk.
The system failed to create C:\Users\user\Documents\Test\New.vhdx .
Failed to create the virtual hard disk
The system failed to create C:\Users\user\Documents\Test\New.vhdx . A Virtual disk support provider for the specified file was not found. (0xC03A0014).
I have ran all Dell Client System updates and all of windows updates.
I have attempted to create a virtual machine on the current SSD and also an external drive. The same error appears.
I have also attempted to create a virtual hard disk via Hyper-v with a Base vhdx, still the same error occurs. I've tested the base image on other laptops of the same model and windows 8.1 without issue.
Any thoughts on how I can fix this?
Thank you,
-JakeHi Jake,
"Enable Data Execution Protection (DEP) in the BIOS and make sure the Format of drive file system is not fat32.
1. Uninstall Intel Active System Monitor 3.0, if installed.
2. Disable "Intel IPMI Service" and "Intel Monitoring Agent" Service.
3. Open regedit and locate: HKLM\System\CurrentControlSet\Services\imbdrv.
4. Change the Start Key to 4 (Disabled).
5. Locate HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E97D-E325-11CE-BFC1-0 8002BE10318}.
6. Take ownership of the ‘Properties’ key.
7. Give yourself full permission for this key.
8. Now locate the properties key; if you see a ‘Security’ entry there, that is your problem. Delete this key.
9. Try attaching or adding the VHD again after rebooting.
If above steps did not help, add the Network Service account to Local Administrator group."
It is quoted from the similar thread below :
http://social.technet.microsoft.com/Forums/windows/en-US/55085ff3-0f26-41bd-b590-bb3490e2d6f5/win-7-professional-a-virtual-disk-support-provider-for-the-specified-file-was-not-found?forum=w7itprovirt
Hope it helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
on a backup DNS w2008 R2 server I tried create a new VM.
[Window Title]
New Virtual Machine Wizard
[Main Instruction]
The server encountered an error while configuring hard disk on SEPmW8.
[Content]
You might not have permission to perform this task.
[Close]
when I tried creating v a new Vhd using default or custom folder, I get
[Window Title]
New Virtual Hard Disk Wizard
[Main Instruction]
The server encountered an error trying to create the virtual hard disk.
[Content]
You might not have permission to perform this task.
[Close]
But I verified the admin ID does have full access to the folders. furthermore it belongs administrators, domain Admins, enterprise admins,
What gives? what additional privilege I need to give to the login ID, I tried in vain adding to Virtual machines but got rejected. I also could not locate anything like virtual machines in the active directory,
Btw I finally managed to create a new VM wi/ VHD but still can't create new vhd
------------Platform info ---
the physical quad core Xenon server for backup dns also works as exchange server
has 12 GB RAM, 931 GB Raid 5 storage with 325 GB free.These actions are not performed in the security context of the user. The Local System / computer account of the Hyper-V Server is what needs the access, not the user.
Also, many AV products will cause these problems if the exclusions are not set properly, as they block the hypervisor from doing its job.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat. -
ORA-20160: Encountered an error while getting the ORACLE user account.
when users trying to apply for the leave . Once they apply for the leave and the respective manager approves it.
They get an notification mail with the error message The changes were not applied because ORA-20160: Encountered an error while getting the ORACLE user account for your concurrent request. Contact your system administrator. ORA-06512: at "APPS.ALR_PER_ABSENCE__800_53447_IAR", line 3 ORA-04088: error during execution of trigger 'APPS.ALR_PER_ABSENCE__800_53447_IAR'
EBS : 12.1.2
Database : 11.2.0We are also facing the same issue , with the following error.
The Changes were not applied because ORA-20160: Encountered an error while getting the ORACLE user account for your concurrent request, Contact your system administrator. ORA-06512: at “ APPS.ALR_PAY_ELEMENT_801_53338_IAR”, line 1 ORA-04088: error during execution of the trigger ‘APPS.ALR_PAY_ELEMENT_801_53338_IAR’
Dear Hussein ,
As per your suggestion , if we disable the trigger , does it workflow goes ahead without any problems ?
By Disabling the trigger , what would be the impact ? I mean does we are going to loose the data that was supposed to be updated the trigger.
And basically please educate me . what is the use of this APPS.ALR_PAY_ELEMENT_801_53338_IAR’ ?
Regards
Raghu -
Error "Encountered an error while exporting the data. View the lof file (DPR-10126)
Hello,
I would like to have sugestions and help to solve a problem in IS 4.2.
I've created a view from two tables, joined together with the key from each one.
Then i've binded the rule with the view (mentioned above) created and calculated score for it.
The calculation is successful, however when i try to export all failed data i have the following error:
"Encountered an error while exporting the data. View the lof file (DPR-10126)"
When exporting failed data from calculations made directly to the datasources i do not encounter any problem, but when i try to export all data to CSV file (not only the 500 results limit) i have this kind of error.
However, when i visualize the data from the view created, it is also possible to export to csv file.
Resuming, the error occurs only when exporting all failed data from the view.
Can anyone help with this issue?
Thx
Best Regards,Hello,
Your information is correct.
I've just confirmed it in the 4.2 SP3 Release Notes and they specifically refer to this issue.
A user who has 'View objects' rights for the project and a failed rule connection cannot export the failed data. This issue has been fixed in this release.
Thank you very much for your input.
Best Regards, -
An unexpected error occurred while configuring the Network Bridge
Windows XP Pro SP2, a new TP61 6460 6WG, all Win updates, all Lenovo updates.
Everything works fine except... when I'm trying to create a network bridge I always get the following: An unexpected error occurred while configuring the Network Bridge.
This is not the situation described in Microsoft's Knowledge Base KB309640 (http://support.microsoft.com/kb/309640/en-us). I have no ICS, no ICF.
Any ideas?I had the same problem and was really frustrated. I was about to pull my hairs out but then i was finally able to solve it. The solution is deleting some files of WMI repository. The complete details can be found on my blog http://cheatppc.blogspot.com/2008/07/unexpected-error-has-occured-while.html
Hope this solves the problem. -
Dear Techies,
We have registered an Extra Information Type as self service OAF page and did some validations using user hook which are working fine. But for some requests EIT creation page is throwing below errors.
1. Encountered an error while getting the ORACLE user account for your concurrent request. Contact your system administrator.
2. An unexpected situation occurred while executing routine FND_DATA_SECURITY.GET_SECURITY_PREDICATE_HELPER.The cause was: The parameter 'p_object_name' cannot be 'GLOBAL'.
System throws these errors whenever user hook suppose to throw our customized validation messages.Since we are at UAT instance, we are bouncing apache and oacore to get rid of these errors every time they appear. But we cannot bounce once it is moved to production.
Kindly share some ideas to fix these errors as we are very close to Go-Live and we are facing this issue with all EIT's and SIT's.
Thanks and Regards
Dileep Kumar.Hi Mahesh,
Thanks for reply.
I have gone through the link that you have suggested. But our EIT user hook validations doesn't have any code related to submission of concurrent programs. More over our error is not stable. If we bounce the apache and oacore, the system will work fine without unexpected errors for some time. We are not even able to replicate these errors.
Thanks and Regards
Dileep Kumar. -
Evdre encountered an error while retrieving the data
hi
all
i have an error
"evdre encountered an error while retrieving data" evdre addin
evdre cannot retrieve data
working on ms 7.0 bpc
excel 2003
i have gone thru the sap service place and found that i have to replace 2003 to 2007
please let me know also if there is any possibility to change my reports in such a way that i may pass with out this error
what is the mistake i am doing while i create the reports ?
ur help is appreciated
thanksThis error message has many root cause.
First let's check if the installation of BPC client is correct.
Just use a simple EVDRE functions and try to expand.
Are you receiving any error? If yes then I suggest to try also for Apshell ppset.
If it is not working then that's means you have a problem with installation.
If you can use EVDRE from another machine then the problem is installaytion of the client.
If the problem is into all computers then the problem is into server.
If the problem is just into one report then you have to review that report because some parameters sent to EVDRE are wrong otit is trying to retrievea region which is toobig.
I hope this will help you toinvestigate the issue.
Regards
Sorin Radulescu -
Error While Configuring the Shared Service with Active Directory
Hi All,
I am getting a error while configuring MSAD with Shared Service, when entering the User Id and password and clicking next, the following error is displayed:
"EPMCSS-05180:Failed to validate Security configuration. Failed to connect. Invalid values for Base DN, User DN or Password. Enter valid value(s). Root Cause : [LDAP: error code 49 - 80090308: LdapErr: DSID-0C0903A9, comment: AcceptSecurityContext error, data 52e, v1db1]"
The AD user has the read access to the all users and group in Active Directory. If I use an Active Directory user with Admin privilege, It is getting connected.
But client is not ready to provide the Admin Access due to their internal policy and I also don't have any document which says admin privilege is required. According to the document,the user should have the following privileges only.
"The distinguished name of the user that Shared Services should use to bind with the user directory. This user must have search privilege on the RDN attribute within the DN. For example, in the dn: cn=John Doe, ou=people, dc=myCompany, dc=com, the bind user should have search access to the cn attribute.Special characters in User DN must be specified using escape characters. See “Using Special Characters” on page 46 for restrictions.
Example: cn=admin,dc=myCompany,dc=com
But I am getting confused with the statement "This user must have search privilege on the RDN attribute within the DN". Is it not search privillege?
Can anybody help me with required privilege for Active Directory user to configure with Shared Service.
Thanks in Advance,
SunilThank you All,
i tried connecting using AD Browser from Microsoft, and it went in properly. then i found out that the AD Team here were giving a Wrong Credentials to connect, they Gave me HYP_OID which infact turned out to be a Principal name instead of a 'cn'.
after searching in the AD Browser i found the correct cn which is "Hyperion OID", then it went to the second Screen where now i am trying to search for the Users based on thier Job Nature.
Thank you for all the Support Guys, you both "Celvin" and "John" are the Top Guys under my Search list for any technical Assistance.
Thank you once again Friends....
Regards,
Sunil...
Shantan.... -
Error while configuring the domain "Configure JDBC Component Schema"
Hi Everyone,
I have installed SOA Suite 11g on my Win 7 machine 64bit OS and while trying to configure the domain for the WebLogic Server. I fallowed the wizard and everything went well till the JDBC Component Schema window. Here I am able to pass through
1. BAM Schema- Failed
2. SOA Infrastructure-Failed
3. User Messaging Service-Passed
4. OWSM MDS Schema-Passed
5. SOA MDS Schema-Passed
and here is the error that i am facing...
Component Schema=BAM Schema
Driver=oracle.jdbc.OracleDriver
URL=jdbc:oracle:thin:@localhost:1521/XE
User=DEV_ORABAM
Password=*******
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='BAM' and version='11.1.1.2.0'
CFGFWK-60850: Test Failed!
CFGFWK-60853: A connection was established to the database but no rows were returned from the test SQL statement.
Component Schema=SOA Infrastructure
Driver=oracle.jdbc.xa.client.OracleXADataSource
URL=jdbc:oracle:thin:@localhost:1521/XE
User=DEV_SOAINFRA
Password=*******
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='SOAINFRA' and version='11.1.1.2.0'
CFGFWK-60850: Test Failed!
CFGFWK-60853: A connection was established to the database but no rows were returned from the test SQL statement.
I googled the error and tried to check whether the Schema_version_registry has any rows are not and initially i don't have any and then I have created table named "Schema_version_registry" and then inserted the values accordingly..
CREATE TABLE schema_version_registry(owner VARCHAR2(30), mr_type VARCHAR2(10), version VARCHAR2(50));
INSERT INTO schema_version_registry(owner, mr_type, version) VALUES ('DEV_SOAINFRA','MDS','11.1.1.2.0');
similarly i did for the DEV_ORABAM but there is no use...........
I am struck at this position can any please help me out........... please..
Thanks in advance
Sorry Guys.. I understood my mistake and change the "mr-type" accordingly... it is successful now..
Thanks if anyone tried to answer it.......
Edited by: user10763276 on Oct 10, 2010 5:11 PMHi can anyone please help me ...all the jdbc component schema is failing for me while creating domain.
please find the log.
Component Schema=SOA Infrastructure
Driver=oracle.jdbc.xa.client.OracleXADataSource
URL=jdbc:oracle:thin:@localhost:1521/XE
User=sys as sysdba
Password=*********
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='SOAINFRA' and version='11.1.1.5.0'
CFGFWK-60850: Test Failed!
CFGFWK-60853: A connection was established to the database but no rows were returned from the test SQL statement.
Component Schema=User Messaging Service
Driver=oracle.jdbc.OracleDriver
URL=jdbc:oracle:thin:@localhost:1521/XE
User=sys as sysdba
Password=*********
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='ORASDPM' and version='11.1.1.2.0'
CFGFWK-60850: Test Failed!
CFGFWK-60853: A connection was established to the database but no rows were returned from the test SQL statement.
Component Schema=OWSM MDS Schema
Driver=oracle.jdbc.OracleDriver
URL=jdbc:oracle:thin:@localhost:1521/XE
User=sys as sysdba
Password=*********
SQL Test=select 1 from schema_version_registry where
owner=(select user from dual) and mr_type='MDS' and
version='11.1.1.5.0'
CFGFWK-60850: Test Failed!
CFGFWK-60853: A connection was established to the database but no rows were returned from the test SQL statement.
Component Schema=SOA MDS Schema
Driver=oracle.jdbc.OracleDriver
URL=jdbc:oracle:thin:@localhost:1521/XE
User=sys as sysdba
Password=*********
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='MDS' and version='11.1.1.5.0'
CFGFWK-60850: Test Failed!
CFGFWK-60853: A connection was established to the database but no rows were returned from the test SQL statement.
" -
Error while configuring the ASM on linux
i am trying to implement ASM of the virtual machine.. i downloaded the ASM libraries and packages and installed them as a "root" user using the following command:
$>rpm -Uvh oracleasm*
after the installtion was done i went to configure the library driver by executing the following command(also as a root user)
$>/etc/init.d/oracleasm configure...
i answered all the question given by the command and then the following error message occured..
This will configure the on-boot properties of the Oracle ASM library
driver. The following questions will determine whether the driver is
loaded on boot and what permissions it will have. The current values
will be shown in brackets ('[]'). Hitting <ENTER> without typing an
answer will keep that current value. Ctrl-C will abort.
Default user to own the driver interface [oracle]:
Default group to own the driver interface [dba]:
Start Oracle ASM library driver on boot (y/n) [y]:
Fix permissions of Oracle ASM disks on boot (y/n) [y]:
Writing Oracle ASM library driver configuration: [ OK ]
Loading module "oracleasm": Unable to load module "oracleasm"
[FAILED]
i don't have much experience with ASM to solve this problem, so if someone can help then i will appreciate it.
NOTE: my platform is
ORACLE10gR2(10.2.0.1)
RHEL 4 update 5.i have been trying to delete the ASM library driver and install it again but i get this message everytime i do so..,
[root@localhost RPMS]# rpm -ev oracleasm-2.6.9-55.0.0.0.2.EL-2.0.3-2.i686.rpm
error: package oracleasm-2.6.9-55.0.0.0.2.EL-2.0.3-2.i686.rpm is not installed
then i execute the following command to install it and the following appears.
[root@localhost RPMS]# rpm -ivh oracleasm-2.6.9-55.0.0.0.2.EL-2.0.3-2.i686.rpm
warning: oracleasm-2.6.9-55.0.0.0.2.EL-2.0.3-2.i686.rpm: V3 DSA signature: NOKEY, key ID b38a8516
Preparing... ########################################### [100%]
package oracleasm-2.6.9-55.0.0.0.2.EL-2.0.3-2 is already installed
it is really weired,,,
if someone have encountered this scenario then please explain this issue for me. -
Error while configuring the application server for ESB on Jdeveloper
While i try to configure a application server connection on Jdeveloper for a remote installation of ESB (advanced mode with all the three components together and not in a cluster mode) i get the following error :
Error getting OC4J Process for: opmn-home+oc4j-10.10.36.21-6003-default:
Error connecting to OPMN (is it running?): Connection refused: connect
All the OC4J processes are running on the server as i get the following output for the ./opmnctl status command :
[oraclesoa@esboid2 bin]$ ./opmnctl status
Processes in Instance: home.localhost.localdomain
--------------------------------------------------------------+---------
ias-component | process-type | pid | status
--------------------------------------------------------------+---------
OC4JGroup:default_group | OC4J:oc4j_soa | 10000 | Alive
OC4JGroup:default_group | OC4J:home | 9999 | Alive
ASG | ASG | N/A | Down
HTTP_Server | HTTP_Server | 9998 | Alive
The installation is on a Linux box.
I give the following details in the connection properties box in Jdeveloper :
host : 10.10.36.21
opmn port : 6003
oc4j instance : home
Also the opmn port is correct :
[oraclesoa@esboid2 bin]$ ./opmnctl status -port
esboid2:6003
Any ideas on this?
Message was edited by:
Nilayi tried with taht.....same error.......is this an issue with port 6003 on the server........it is a linux server and I cannot telnet to it......i can use SSH though.......how to know whether the opmn port(6003) is open or not?.....
-
Error while configuring the database
Hello all-
I have installed Oracle 11G and i am trying to create a Database via Database Configuration Assistant & i get following Error:
May 17, 2010 2:22:55 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM Configuration Assistant again .
Refer to the log file at C:\app\admin\cfgtoollogs\dbca\FOUNDATION\emConfig.log for more details.
May 17, 2010 2:22:55 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM Configuration Assistant again .
at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:3245)
at oracle.sysman.emcp.EMReposConfig.unlockMGMTAccount(EMReposConfig.java:1001)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:346)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:158)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:253)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:583)
at oracle.sysman.assistants.util.em.EMConfigStep.executeImpl(EMConfigStep.java:139)
at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
at oracle.sysman.assistants.util.step.BasicStep.callStep(BasicStep.java:251)
at oracle.sysman.assistants.dbca.backend.PostDBConfigureStep.executeImpl(PostDBConfigureStep.java:269)
at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2667)
at java.lang.Thread.run(Thread.java:595)
May 17, 2010 2:22:55 PM oracle.sysman.emcp.EMConfig restoreOuiLoc
CONFIG: Restoring oracle.installer.oui_loc to C:\app\admin\product\11.2.0\dbhome_1\oui
I have seen the service for the Listener its up & running. Is there something that i shud do to register the database service with listener.
Any help would be appreciated.
Thanks!Hello,
As previously posted you don't have to download Netca or Net Manager.
However, you may find on the links below an introduction to these tools:
http://www.orafaq.com/wiki/NetCA
http://www.orafaq.com/wiki/Net_Manager
Hope this help.
Best regards,
Jean-Valentin -
Error while configuring the directory in ALBPM Enterprise 6.0 WL edition
Hi,
We have installed ALBPM Enterprise 6.0 for Weblogic edition to deploy ALBPM processes into Enterprise 6.0. I tried to configure directory through ALBPM admin center.
I have checked the below options and provided necessary information asked in the series of dialog boxes.
- Create Directory Service
- Create Process engine
- Create ALBPM application EARs
- BEA Weblogic Configuration
We get error in the last step (BEA weblogic configuration) stating that there is some problem in executing the WLST script:-
Problem invoking WLST - Traceback (innermost last):
File "C:\Documents and Settings\14360\.configWizard\tmp\config.py", line 640, in ?
NameError: engineType
We tried to deploy the ALBPM application EARs manually to weblogic. But there are lot of dependencies, so we couldn't successfuly deploy them.
Appreciate any help on resolving the WLST error.
Thanks in advance
DeepakDeepak:
Could you please check the info on
http://tracker.fuegolabs.com/browse/EAP-985
HTH
Nico
Deepak Vinod Kumar wrote:
Hi,
We have installed ALBPM Enterprise 6.0 for Weblogic edition to deploy ALBPM processes into Enterprise 6.0. I tried to configure directory through ALBPM admin center.
I have checked the below options and provided necessary information asked in the series of dialog boxes.
- Create Directory Service
- Create Process engine
- Create ALBPM application EARs
- BEA Weblogic Configuration
We get error in the last step (BEA weblogic configuration) stating that there is some problem in executing the WLST script:-
Problem invoking WLST - Traceback (innermost last):
File "C:\Documents and Settings\14360\.configWizard\tmp\config.py", line 640, in ?
NameError: engineType
We tried to deploy the ALBPM application EARs manually to weblogic. But there are lot of dependencies, so we couldn't successfuly deploy them.
Appreciate any help on resolving the WLST error.
Thanks in advance
Deepak -
Error while configuring the automatic payment
Hi
I configured for the over and under payment. However whenever i try to to use the reason code i get an error . reason code with automatic charge off is not permitted here.I was using the Tcode F-28
The diagnosis says that the automatic posting requires adtional specifications.and since the difference is not from one open item this method can not be used.
Need help on this.
Thanks in advanceThank you All,
i tried connecting using AD Browser from Microsoft, and it went in properly. then i found out that the AD Team here were giving a Wrong Credentials to connect, they Gave me HYP_OID which infact turned out to be a Principal name instead of a 'cn'.
after searching in the AD Browser i found the correct cn which is "Hyperion OID", then it went to the second Screen where now i am trying to search for the Users based on thier Job Nature.
Thank you for all the Support Guys, you both "Celvin" and "John" are the Top Guys under my Search list for any technical Assistance.
Thank you once again Friends....
Regards,
Sunil...
Shantan....
Maybe you are looking for
-
SharePoint 2010 Collect Signatures workflow - no digital signatures?
Hello, I configured a "Collect Signatures" workflow for the content type "Document", then uploaded a MS Word 2010 (.docx) document as content type "Document". This Word document as 2 empty Signature Line in it. I then start the workflow, basically 2
-
I'm building a site with iweb and I want to add some images that have animation (gif). each time I add it I get the "player" window so I have to hit play to get the animation to work. Is there a better way to add animation or is there a way to have t
-
Multiple countries live in SAP, system logon in English...
Hi, We currently have an MDMP R/3 system that has been configured to allow users to logon in RU (amongst other CEE countries) so they can enter data in Russian, but the system remains in English. We have achieved this without actually installing the
-
Keyboard shortcut for opening mail messages
i'd like to be able to open email messages using a keyboard shortcut. i suspect i'm being thick, but I can't seem to find a way to do that. (i tried the keyboard shortcut function in system preferences, but because there is no "open" menu command, I
-
My iphone and ipad doesnt wanna connect with bluetooth
Why most of apple say "FORGET THIS DEVICE" if it doesnt wanna connect