Hyper V Error - Microsoft Emulated IDE Controller

Hi
in a new server (W2008 R2) - HP Proliant ML 350 G5 I can't start any virtual machines. When I try to start one virtual machine I see an error about Microsoft Emulated IDE Controller if virtual machine has an vhd attached, but is the virtual machine hasn't
vhd the error is different: Microsoft Synthetic SCSI Controller Insufficient Memory.
I've reinstalled HyperV role, but I'm in the same state
Any ideas?
Thanks

Correct, you created virtual machines, you just haven't installed an OS into them yet. Even though it has no OS it will still use whatever memory you tell it to from the get go. So, how much memory is configured in your VM settings?
See this screen shot for what i am talking about. Can you post a screenshot for your setup as well?

Similar Messages

  • Hyper-V virtual machines may not start, and receive the error: Microsoft Emulated IDE Controller (Instance ID {83F8638B-8DCA-4152-9EDA-2CA8B33039B4}): Failed to Power on

    I have used the Article ID: 2249906 to try and resove this error. It only started since I have created a dediacted SQL 2008 Server on the network. This is my attempt, so far using icacls:
    icacls "C:\Users\Public\Documents\Hyper-V\Virtual hard disks\XYZ-SQL.vhd" /grant "NT VIRTUAL MACHINE
    \13101CB0-271Z-4434-9736-E1DE331D316BZ":F
    NT VIRTUAL MACHINE\13101CB0-271Z-4434-9736-E1DE331D316BZ: No mapping between account names and security
    IDs was done.Successfully processed 0 files; Failed processing 1 files
    Any ideas as this is becoming very disruptive to the network as the VM is a DC.
    Many Thanks
    Paul.B

    From your description it sounds as if you have two VMs trying to use the exact same virtual disk.  And this is not possible without using differencing disks in between.  (it will give the error you describe when trying to power on the second).
    Beyond that, I would have expected the configuraiton change to work.  Another possibility is simply creating a new VM using the existing virutal disk.  This is non-descructive as well and absolutely re-creates all of the VM objects and generates
    new security identifiers.
    If that does not work, then there is more to this puzzle than has been mentioned here and you will need to provide greater detail.
    Brian Ehlert (hopefully you have found this useful) http://ITProctology.blogspot.com
    Learn. Apply. Repeat.

  • I get this error--"Microsoft Visual C++ Runtime Error, Program: c:\programfiles\mozillafirefox\firefox.exe, abnormal program termination" any ideas???

    I get this error--"Microsoft Visual C++ Runtime Error, Program: c:\programfiles\mozillafirefox\firefox.exe, abnormal program termination" any ideas???
    no specific web site causes this to happen.

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

  • Satellite P300-156 - driver detected controller error on \Device\Ide\IdePort1

    Hi
    I have recently installed a secondary hard drive in my P300-156 and am having some problems with it. I keep getting Event ID 11 in the system event log "The driver detected a controller error on \Device\Ide\IdePort1." and suffer with very bad performance with this drive.
    The drive is new and works fine in other systems and even works ok if I swap drive bays on my P300-156 but the problem with that is the drive does not fit in the other bay as it is quite thick. The drive in question is a Samsung HM100UI 2.5" 1TB Sata. I have also tried other drives in this bay and they work ok too.
    I am using windows 7 ultimate and Intel chipset drivers. It's an Intel ICH8M SATA AHCI controller, driver version 7.0.0.1013. Have tried different drivers and AHCI/IDE mode. Also tried a fresh installation and the problem persists.
    Am at a loss why this drive is having problems is there anything else someone can suggest to try?
    Thanks in advance.

    > {quote:title=peterk_1 wrote:}{quote}
    > Not all drive bays are made equal. The P500 second bay takes the "thicker" 2.5" drives.
    >
    > The current Intel chipset "driver" is v10. I have it installed BUT the installation if you want to do a complete install is not a simple task. If you download and unpack you can point the driver update to that location. Start at Intel.com
    Thanks!! This worked! It seems the Intel INF auto update utility didn't update them to the latest. I had to download the [RST and AHCI Driver and GUI|http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=20110&lang=eng] and manually search for new drivers in device manager. Now the drive is noticeably quicker and error free :)
    Thanks for all the help guys :)

  • KT4AV IDE Controller Problems

    Hi,
    I had a problem with one of my controllers stuck in PIO mode so I deleted it and now it says in reinstall it has a problem. I deleted all 3 and now I have a yellow tag on 2 of the controllers and the only one thats working fine is VIA Bus Master IDE Controller.
    I've also downloaded the 4 in one driver package and that does not work because it comes back with the following error:
    "16 Bit Windows Subsystem
    C:\windows\system32\autoexec.nt. The system file is not suitable for running MS-DOS and Microsoft Windows applications. Choose "Close" to terminate the application."
    Now Im running Windows XP with SP2
    Now what do I do?
    Regards all.

    Hello there :hypecrite:
    1) Try reinstalling it uder safe mode.  Can you still go to safe mode?
    2) Try updating the VIA IDE Bus master first to Standard IDE controller. Next, if there is no primary and secondary IDE, go to add new hardware and install the standard primary and secondary IDE.  If no problems occured, then it is time to install the VIA 4in1 driver under normal mode.
    3) Also try removing the VIA Bus master IDE as well uder safe mode.  Then, I think widows will ask you to restart you PC. And then, windows will automatically install its driver.  If that happens, then you must install next the VIA 4n1 driver.
    4) What are you connecting from that IDE controller that only detects PIO mode?
     :hypecrite:

  • ERROR reports.reportdefinition : com.crystaldecisions.reports.queryengine.driverImpl.m: JDBC Error: [Microsoft][ODBC Driver Manager] Invalid string or buffer length

    I have developed Java web application which uses Crystal Report 2013 , java 1.6 , Windows 32 bit System, All the reports are loading fine in the Following environment
    Development Environment
    Windows7 Professional Service pack 1 -32 bit
    Java - 1.6
    Internet Explorer 11
    Oracle Client 10g 32 bit ODBC driver
    Testing Environment
    Windows Server 2008 R2 Enterprise - 64 bit
    java 1.6
    Internet Explorer 9
    Oracle Client 11g 62 bit ODBC driver
    While loading reports in the 64 bit server the error occurs
    ERROR reports.reportdefinition :  com.crystaldecisions.reports.queryengine.driverImpl.m: JDBC Error: [Microsoft][ODBC Driver Manager] Invalid string or buffer length
    ERROR dataengine.datasource : Failed to read next recurring database record: database row set error.
    com.crystaldecisions.reports.reportdefinition.datainterface.j: JDBC Error: [Microsoft][ODBC Driver Manager] Invalid string or buffer length
        at com.crystaldecisions.reports.reportdefinition.datainterface.q.a(Unknown Source)
        at com.crystaldecisions.reports.dataengine.n.m(Unknown Source)
        at com.crystaldecisions.reports.dataengine.n.l(Unknown Source)
        at com.crystaldecisions.reports.dataengine.n.bn(Unknown Source)
        at com.crystaldecisions.reports.dataengine.n.bp(Unknown Source)
        at com.crystaldecisions.reports.dataengine.n.else(Unknown Source)
        at com.crystaldecisions.reports.dataengine.s.a(Unknown Source)
        at com.crystaldecisions.reports.dataengine.bk.a(Unknown Source)
        at com.crystaldecisions.reports.dataengine.bk.ab(Unknown Source)
        at com.crystaldecisions.reports.dataengine.bk.<init>(Unknown Source)
        at com.crystaldecisions.reports.dataengine.bk.if(Unknown Source)
        at com.crystaldecisions.reports.dataengine.bk.a(Unknown Source)
        at com.crystaldecisions.reports.formatter.formatter.objectformatter.bv.a(Unknown Source)
        at com.crystaldecisions.reports.formatter.formatter.objectformatter.bv.a(Unknown Source)
        at com.crystaldecisions.reports.formatter.formatter.objectformatter.be.a(Unknown Source)
        at com.crystaldecisions.reports.formatter.formatter.objectformatter.be.h(Unknown Source)
        at com.crystaldecisions.reports.formatter.formatter.objectformatter.i.h(Unknown Source)
        at com.crystaldecisions.reports.formatter.formatter.objectformatter.be.for(Unknown Source)
        at com.crystaldecisions.reports.formatter.formatter.objectformatter.bt.a(Unknown Source)
        at com.crystaldecisions.reports.formatter.formatter.objectformatter.bv.a(Unknown Source)
        at com.crystaldecisions.reports.formatter.formatter.objectformatter.bv.a(Unknown Source)
        at com.crystaldecisions.reports.formatter.formatter.objectformatter.bf.a(Unknown Source)
        at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.for(Unknown Source)
        at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.for(Unknown Source)
        at com.crystaldecisions.reports.formatter.formatter.objectformatter.b3.for(Unknown Source)
        at com.crystaldecisions.reports.formatter.formatter.objectformatter.bt.a(Unknown Source)
        at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.a(Unknown Source)
        at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.a(Unknown Source)
        at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.a(Unknown Source)
        at com.crystaldecisions.reports.formatter.formatter.objectformatter.ca.a(Unknown Source)
        at com.crystaldecisions.reports.formatter.formatter.objectformatter.a9.a(Unknown Source)
        at com.crystaldecisions.reports.formatter.formatter.e.m.a(Unknown Source)
        at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.for(Unknown Source)
        at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.for(Unknown Source)
        at com.crystaldecisions.reports.formatter.formatter.objectformatter.b3.for(Unknown Source)
        at com.crystaldecisions.reports.formatter.formatter.e.m.for(Unknown Source)
        at com.crystaldecisions.reports.formatter.formatter.objectformatter.bt.a(Unknown Source)
        at com.crystaldecisions.reports.formatter.formatter.e.p.l(Unknown Source)
        at com.crystaldecisions.reports.formatter.formatter.e.p.void(Unknown Source)
        at com.crystaldecisions.reports.formatter.formatter.e.p.l(Unknown Source)
        at com.crystaldecisions.reports.formatter.formatter.e.p.aE(Unknown Source)
        at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source)
        at com.crystaldecisions.reports.formatter.a.c.if(Unknown Source)
        at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source)
        at com.businessobjects.reports.sdk.b.b.int(Unknown Source)
        at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
        at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)
        at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)
        at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source)
        at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
        at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
        at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
        at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
        at com.crystaldecisions.reports.sdk.PrintOutputController.export(Unknown Source)
        at com.erm.controller.ALMReportsController.queryDll(ALMReportsController.java:1681)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
        at java.lang.reflect.Method.invoke(Unknown Source)
        at org.springframework.web.servlet.mvc.multiaction.MultiActionController.invokeNamedMethod(MultiActionController.java:471)
        at org.springframework.web.servlet.mvc.multiaction.MultiActionController.handleRequestInternal(MultiActionController.java:408)
        at org.springframework.web.servlet.mvc.AbstractController.handleRequest(AbstractController.java:153)
        at org.springframework.web.servlet.mvc.SimpleControllerHandlerAdapter.handle(SimpleControllerHandlerAdapter.java:48)
        at org.springframework.web.servlet.DispatcherServlet.doDispatch(DispatcherServlet.java:925)
        at org.springframework.web.servlet.DispatcherServlet.doService(DispatcherServlet.java:856)
        at org.springframework.web.servlet.FrameworkServlet.processRequest(FrameworkServlet.java:936)
        at org.springframework.web.servlet.FrameworkServlet.doPost(FrameworkServlet.java:838)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:643)
        at org.springframework.web.servlet.FrameworkServlet.service(FrameworkServlet.java:812)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:723)
        at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
        at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
        at com.erm.authentication.HttpSecurityFilter.doFilter(HttpSecurityFilter.java:658)
        at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
        at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
        at org.springframework.web.filter.CharacterEncodingFilter.doFilterInternal(CharacterEncodingFilter.java:88)
        at org.springframework.web.filter.OncePerRequestFilter.doFilter(OncePerRequestFilter.java:107)
        at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
        at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
        at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
        at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
        at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
        at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:103)
        at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
        at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:293)
        at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:861)
        at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:606)
        at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:489)
        at java.lang.Thread.run(Unknown Source)
    Caused by: com.crystaldecisions.reports.queryengine.driverImpl.m: JDBC Error: [Microsoft][ODBC Driver Manager] Invalid string or buffer length
        at com.crystaldecisions.reports.queryengine.driverImpl.o.if(Unknown Source)
        at com.crystaldecisions.reports.queryengine.ap.if(Unknown Source)
        at com.crystaldecisions.reports.queryengine.l.bN(Unknown Source)
        at com.crystaldecisions.reports.queryengine.ap.eg(Unknown Source)
        at com.crystaldecisions.reports.queryengine.ap.e(Unknown Source)
        at com.crystaldecisions.reports.queryengine.b2.f(Unknown Source)
        at com.crystaldecisions.reports.queryengine.b2.dy(Unknown Source)
        ... 89 more
    Caused by: java.sql.SQLException: [Microsoft][ODBC Driver Manager] Invalid string or buffer length
        at sun.jdbc.odbc.JdbcOdbc.createSQLException(Unknown Source)
        at sun.jdbc.odbc.JdbcOdbc.standardError(Unknown Source)
        at sun.jdbc.odbc.JdbcOdbc.SQLGetDataString(Unknown Source)
        at sun.jdbc.odbc.JdbcOdbcResultSet.getDataString(Unknown Source)
        at sun.jdbc.odbc.JdbcOdbcResultSet.getBigDecimal(Unknown Source)

    A few things to note:
    1) Crystal Report 2013 doe snot install any SDK. Thus the assumption is that you are using CR from teh following link:
    SAP BusinessObjects - SAP Crystal Reports, Version For Eclipse Download
    2) Since you are using a 64 bit connection (Oracle Client 11g 62 bit ODBC driver) you will have to make sure you are using 64 bit JVM. Otherwise, follow Dell's advice and use a 32 bit ODBC datasource.
    3) On one test you are using Oracle Client 10g 32 bit ODBC driver and the other you are using Oracle Client 11g 64 bit ODBC driver. You might want to see if you can run your app using Client 11g 32 bit ODBC driver.
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada

  • When i try to install itunes 10.6.3 for windows vista i get "error microsoft VC*80.CRT,type="win32",version="8.0.50727.6195".publicKey token="1fc8b3b9a1e18e3b",ProcessorArchitecture="x86"   what should i do?

    when i try to install itunes 10.6.3 for windows vista i get "error microsoft VC*80.CRT,type="win32",version="8.0.50727.6195".publicKey token="1fc8b3b9a1e18e3b",ProcessorArchitecture="x86"   what should i do?

    same problem. tried the ff fixes from microsoft but no joy
    http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/gett ing-error-message-an-error-occurred-during-the/10122022-2d88-4266-a695-6c6ddeafd 019?tab=AllReplies&page=1
    http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/ windows-vista-unable-to-install-itunes-an-error/19b48df7-54c8-47f3-8854-d34118fa a79a
    http://support.microsoft.com/mats/system_maintenance_for_windows/en-us
    other ideas would be appreciated.
    cheers

  • I tried to install Icloud on my windows 8 touch PC and it stops at the end and say there is an error.. any Ideas?

    I tried to install icloud on  my windows 8 touch PC and it stops at the end and says Error? Any Ideas what is wrong?

    This is all I could find: http://support.microsoft.com/kb/2643995

  • Hi i am getting Innternal Error in jdeveloper IDE in side preferences- code editer- java

    hi i am getting Innternal Error in jdeveloper IDE in side preferences->code editer->java
    if u know something about this error psease share here
    java.lang.NullPointerException
      at oracle.jdevimpl.java.editing.JavaOptionsPanel.loadSettingsFrom(JavaOptionsPanel.java:186)
      at oracle.jdevimpl.java.editing.JavaOptionsPanel.onEntry(JavaOptionsPanel.java:67)
      at oracle.ide.panels.MDDPanel.enterTraversableImpl(MDDPanel.java:1220)
      at oracle.ide.panels.MDDPanel.enterTraversable(MDDPanel.java:1201)
      at oracle.ide.panels.MDDPanel.access$1200(MDDPanel.java:128)
      at oracle.ide.panels.MDDPanel$Tsl.updateSelectedNavigable(MDDPanel.java:1657)
      at oracle.ide.panels.MDDPanel$Tsl.updateSelection(MDDPanel.java:1525)
      at oracle.ide.panels.MDDPanel$Tsl.actionPerformed(MDDPanel.java:1519)
      at javax.swing.Timer.fireActionPerformed(Timer.java:291)
      at javax.swing.Timer$DoPostEvent.run(Timer.java:221)
      at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
      at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:642)
      at java.awt.EventQueue.access$000(EventQueue.java:85)
      at java.awt.EventQueue$1.run(EventQueue.java:603)
      at java.awt.EventQueue$1.run(EventQueue.java:601)
      at java.security.AccessController.doPrivileged(Native Method)
      at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
      at java.awt.EventQueue.dispatchEvent(EventQueue.java:612)
      at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
      at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
      at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:178)
      at java.awt.Dialog$1.run(Dialog.java:1046)
      at java.awt.Dialog$3.run(Dialog.java:1098)
      at java.security.AccessController.doPrivileged(Native Method)
      at java.awt.Dialog.show(Dialog.java:1096)
      at java.awt.Component.show(Component.java:1585)
      at java.awt.Component.setVisible(Component.java:1537)
      at java.awt.Window.setVisible(Window.java:842)
      at java.awt.Dialog.setVisible(Dialog.java:986)
      at oracle.bali.ewt.dialog.JEWTDialog.runDialog(JEWTDialog.java:395)
      at oracle.bali.ewt.dialog.JEWTDialog.runDialog(JEWTDialog.java:356)
      at oracle.ide.dialogs.WizardLauncher.runDialog(WizardLauncher.java:55)
      at oracle.ide.panels.TDialogLauncher.showDialog(TDialogLauncher.java:225)
      at oracle.ide.config.IdeSettings.showDialog(IdeSettings.java:808)
      at oracle.ide.config.IdeSettings.showDialog(IdeSettings.java:601)
      at oracle.ide.ceditor.CodeEditorController.handleEvent(CodeEditorController.java:956)
      at oracle.ide.controller.IdeAction.performAction(IdeAction.java:529)
      at oracle.ide.controller.IdeAction.actionPerformedImpl(IdeAction.java:897)
      at oracle.ide.controller.IdeAction.actionPerformed(IdeAction.java:501)
      at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
      at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
      at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
      at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
      at javax.swing.AbstractButton.doClick(AbstractButton.java:357)
      at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:809)
      at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:850)
      at java.awt.Component.processMouseEvent(Component.java:6289)
      at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
      at java.awt.Component.processEvent(Component.java:6054)
      at java.awt.Container.processEvent(Container.java:2041)
      at java.awt.Component.dispatchEventImpl(Component.java:4652)
      at java.awt.Container.dispatchEventImpl(Container.java:2099)
      at java.awt.Component.dispatchEvent(Component.java:4482)
      at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4577)
      at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
      at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
      at java.awt.Container.dispatchEventImpl(Container.java:2085)
      at java.awt.Window.dispatchEventImpl(Window.java:2478)
      at java.awt.Component.dispatchEvent(Component.java:4482)
      at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:644)
      at java.awt.EventQueue.access$000(EventQueue.java:85)
      at java.awt.EventQueue$1.run(EventQueue.java:603)
      at java.awt.EventQueue$1.run(EventQueue.java:601)
      at java.security.AccessController.doPrivileged(Native Method)
      at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
      at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:98)
      at java.awt.EventQueue$2.run(EventQueue.java:617)
      at java.awt.EventQueue$2.run(EventQueue.java:615)
      at java.security.AccessController.doPrivileged(Native Method)
      at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
      at java.awt.EventQueue.dispatchEvent(EventQueue.java:614)
      at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
      at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
      at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
      at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
      at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
      at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)

    Hi,
    make sure the IDE is installed with the proper JDK version
    Frank

  • IDE Controller Card?

    Anyone using an IDE card they can recommend? I'm thinking of upgrading from my older A64 to an Intel quad core, but all of my devices are ATA. The cheap mobos for 775 only seem to have one IDE controller.
    Another question I have is whether these cards are capable of doing the normal master/slave configuration for 2 devices per port, or since I guess it would have to be recognized in the BIOS as a SCSI device, whether they can only handle one per connection?
    I'd also like to be able to boot from it so I can keep optical drives separate from hard drives, but it's not absolutely necessary. I'd prefer it, but it's not a deal breaker.
    I was looking at one of these two:
    http://www.newegg.com/Product/Product.a … 6815124001
    http://www.newegg.com/Product/Product.a … 6816132005
    I believe they both use a Silicon Image chipset, which afaik is supported in 2.6.x. Any thoughts or other suggestions?

    Okay - thanks very much. I already got a cheap one with silicone image chipset, but now I'm having trouble booting it.
    With hard disks on the motherboard IDE (I'll call it IDE1) and optical drives on the card, the disk won't boot, either giving a Disk Boot Failure, or VMI hangup.
    With the hard disks on the card and optical drives on IDE1, the computer will boot past grub, but then it says it can't find /dev/sda2 and dies.
    I booted a Slax CD, and the drives when on the card are mounted as sdex and sdfx. But then grub will not boot no matter what I change the boot line to. I tried everything from sdax to sdfx, it just can't see the partition.
    I can boot the computer if I only hook up the drives to the IDE channel and leave off the optical drives. But obviously that is not really useful and defeats the purpose for which I bought the card. :-p I also somehow had everything working at one point with disks on IDE1 and opticals on the card (except the opticals wouldn't boot, which I was trying to fix) but somehow I can't get that back. I've tried every configuration I can think of, cleared the CMOS, reset everything, still it doesn't work. As soon as I plug in the optical drives to the card, it just hangs at that VMI error.
    Any advice before I give up on this motherboard and try a better one?
    xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
    N/M - I got it. I just had to boot the fallback image and then rebuild the kernel.  Now I have the drive on the card booting fine, and it also boots from optical.
    Last edited by userlander (2009-01-24 19:01:23)

  • No way to publish a workflow, I get this error: System.InvalidOperationException: Operation failed with error Microsoft.Workflow.Client.ScopeInactiveException: Scope ... is not in an active state. Its current state is 'Unregistering'

    Hi,
    I'm using Project Server 2013 and I'm not able to publish a workflow in SharePoint Designer 2013, I get this error:
    System.InvalidOperationException: Operation failed with error Microsoft.Workflow.Client.ScopeInactiveException: Scope '/SharePoint/default/d7feb9ea-ccb2-4ec3-8f89-2a45b6cf3777' is not in an active state. Its current
    state is 'Unregistering'. HTTP headers received from the server - ActivityId: c47ef567-8c54-4ae0-9a1a-1e4fb51320d8. NodeId: TestServer. Scope: /SharePoint/default/d7feb9ea-ccb2-4ec3-8f89-2a45b6cf3777. Client ActivityId : c6e5979c-20f8-e042-1f9d-2cb2a25d7f9e.
    ---> System.Net.WebExceptio
    The thing is that I transferred the databases from a Prod.Env. to the Test Env. and from that moment on the Test Env. stopped working (only workflows), then I
    was thinking that maybe the workflow is not working in the Test Environment because when I transferred the databases from Prod Env to Test Env I didn’t transfer the databases related to workflow, I only transferred:
    WSS_Content
    PWA_ServiceDB
    But I didn’t transfer:
    SBGatewayDatabase
    SBManagementDB
    SBMessageContainer01
    WFInstanceManagementDB
    WFManagementDB
    WFResourceManagementDB
    I didn’t transfer them because, before, when I transferred DB’s in version 2010, these DB’s were not needed, as the workflows were done using another method.
    So, I tried to create a new workflow in the Test Env. but there is no way, I always get that error.
    I've tried to Register again the workflow, and the result looks ok, but it doesn't solve the problem:
    Register-SPWorkflowService
    –SPSite "http://whatever/PWA"
    –WorkflowHostUri "http://TestServer:12291"
    –AllowOAuthHttp -Force
    Do you know how to solve this issue or have an idea to give me some light?
    Thank you for your help and regards,
    José Espases

    Looks like you haven't defined the WF scope or the site where you are trying to deploy the workflow to isn't included in the scope
    Check this article
    http://fangdahai.blogspot.in/2013/04/on-premise-windows-workflow-server.html
    Thanks | epmXperts | http://epmxperts.wordpress.com

  • Major issues with nforce3 250GB IDE controller: help needed

    I am currently facing the following issues with the IDE controller of the Nforce3 250GB:
    1.   On random occasions, the PC hangs on the BIOS boot logo (Platinum) and fails to detect the IDE drives.
    2.   In most of the above cases, one of the PATA drives (generally the Seagate ST340016A) is not detected.
    3.   Sometimes, the PC shows a faded ‘Windows XP’ boot logo and gets stuck there.
    4.   Occasionally, the PC boots successfully into Windows but runs slower than a 386 (All IDE read/write operations take an eternity to complete)
    I have thoroughly checked all the drives using Seagate SEATOOLS and Samsung HUTIL (done a complete surface scan and IDE cable checks) and found no errors.
    All the drives are configured using the ‘Cable select’ option on their respective jumper terminals.
    Here is a short summary of the drives:
    Samsung SP0802N (boot drive), PATA primary master (Cable select)
    Seagate ST340016A PATA primary slave (Cable select)
    Seagate SATA drive with 2MB cache (shall update model number soon)
    Optical drives:
    Asus CD writer Secondary master, cable select
    Asus DVD Rom secondary slave cable select
    --Total 4 PATA devices, 1 SATA device NO RAID
    All the drives have been checked thoroughly. They are working fine. However, the motherboard fails to detect them on random occasions.
    I have tried resetting the CMOS.
    Configuration:
    Athlon 64 3000+ E6 core with SSE3 support
    MSI K8N Neo2-FX BIOS 1.C
    1GB dual channel kit Corsair TWINX1024-3200C2 running at 2.5-3-3-8 @ 2.75 V
    XFX 7600GT AGP (1.5V AGP)
    Seagate ST340016A 7200 RPM PATA
    Samsung SP0802N 7200 RPM SATA
    Seagate 80GB SATA Drive with 2 MB cache
    ANTEC Smartpower SL450 450 watt PSU
    Windows XP Home Edition SP2 + all updates
    Latest drivers for everything

    Hi,
      I am back here after a long long time    Now a days, I run a Intel 965P based Core 2 Duo as my primary desktop. I still use my AMD64 platform and I did fix all the issues with it! 
    Sorry, I didn't update this thread earlier with the details of how I had solved those issues...
    Well, initially I could not get my Radeon 9600XT to work on the nforce 3. I dirched it and got a 7600GT and that solved the GFX crashes..
    The HDD problem (the one that I described in this thread) was fixed by:
    1. Using the SATA ports 3 & 4 instead of SATA1 & 2!!! 
    Apparently, the issue of the cyclic reboot & the faded XP logo crash during reboot happens with a lot of Nforce 3 250 owners.
    Using the other set of SATA ports fixes this for good...
    I also replaced the 40GB Seagate ... But that wasn't the cause of this issue, because the cyclic reboot recurred with the remaining HDDs when SATA1 & 2 were in use...
    Motherboards are really quirky, I admit

  • Error (-3212) Any ideas?

    Just installed an update for iTunes. Can't connect to iTunes Store now. Error (-3212) Any ideas?
    I am connected to my home network. Watching Hulu on another screen - no issues there.

    iTunes Diagnostics - the connection test to the iTunes store was successful.
    Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
    Hewlett-Packard h8-1141
    iTunes 11.1.1.11
    QuickTime 7.7.4
    FairPlay 2.5.16
    Apple Application Support 2.3.6
    iPod Updater Library 11.1f5
    VoiceOver Kit 1.4.2 (222093/222742)
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 7.0.0.117
    Apple Mobile Device Driver 1.64.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 0031B3700D366660
    Current user is an administrator.
    The current local date and time is 2013-10-04 10:18:12.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    NVIDIA, NVIDIA GeForce GTX 550 Ti
    **** External Plug-ins Information ****
    No external plug-ins installed.
    Genius ID: 15d2c0fec6de2143c12cd29d1d2e9a2c
    iPodService 11.1.1.11 (x64) is currently running.
    iTunesHelper is currently not running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:          {FCAC5379-6783-4685-A469-B3D1B522E209}
    Description:          Microsoft Virtual WiFi Miniport Adapter
    IP Address:          0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:          0.0.0.0
    DHCP Enabled:          Yes
    DHCP Server:
    Lease Obtained:          Wed Dec 31 17:00:00 1969
    Lease Expires:          Wed Dec 31 17:00:00 1969
    DNS Servers:
    Adapter Name:          {A77A203E-ACDB-4F0C-A0A6-01262F134006}
    Description:          802.11n Wireless LAN Card
    IP Address:          192.168.1.4
    Subnet Mask:          255.255.255.0
    Default Gateway:          192.168.1.1
    DHCP Enabled:          Yes
    DHCP Server:          192.168.1.1
    Lease Obtained:          Fri Oct 04 10:14:06 2013
    Lease Expires:          Sat Oct 05 10:14:06 2013
    DNS Servers:          192.168.1.1
    Active Connection:          LAN Connection
    Connected:          Yes
    Online:                    Yes
    Using Modem:          No
    Using LAN:          Yes
    Using Proxy:          No
    Firewall Information
    Windows Firewall is on.
    iTunes is NOT enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was successful.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2013-10-01 19:19:36.

  • 4321 NetBT errors :1b after domain controller becomes pdc

    I am getting  4321 NetBT errors :1b after domain controller becomes pdc errors after moving fsmo roles over to new pdc.  The error is the DOMAIN :1b could not be regitstered with the IP of the new DC.  The computer with the IP would not allow
    it to be claimed.  I can;t ping the computer that would not allow it to be claimed and I dont see WINs on out network.  This is a HYPER-V domain controller.
    Is this gonig to effect network clients?

    Hi,
    Glad to hear that it has been solved! Thank you very much for your sharing.
    Please feel free to let us know if there are any issues in the future.
    Best Regards,
    Amy Wang

  • ASUS P5W DH Deluxe kernel panic ACPI & IDE controller is

    I recently built a new system with the ASUS P5W DH Deluxe motherboard.  Using the newISOs (both the new kernel and old) available on the forums I tried to install Arch only to be met with an extremely nondescript kernel panic (just a bunch of numbers followed by kernel panic).  After a bit of fiddling with it I managed to get the system to boot to the installation shell by giving it the "acpi=off" boot parameter.
    After figuring this out I thought I was set, but I was so very wrong.  The IDE harddrive I was trying to install to was on the Jmicron JMB363 IDE controller that seems to have been hacked together and thrown in at the last second to allow 4 IDE devices in the system (something to do with the Intel specification for the 975X chipset I believe.)
    Anyway, the system mounts my primary SATA harddrive "sda" just fine.  It then proceeds to load my two PATA DVD+RW drives: "hda" and "hdb" from the intel IDE controller just fine.  Then while trying to load the my PATA harddrive "hde" from the Jmicron JMB363 IDE controller, the installation slows to a crawl requiring several minutes before the system boots and throwing errors along the way.  The harddrive is also unusable in the system.  If I try to do something like "cfdisk /dev/hde" the system will hard lock and require a reboot.
    Is there something I've configured incorrectly or is this perhaps a support issue with the Jmicron JMB363 controller.  Also, why do I need to turn ACPI off to avoid a kernel panic?  I should probably mention that there is a bios option that can be turned on or off to support ACPI 2.0 (disabled by default).
    Thanks for any input!

    I'm running archlinux on a P5W DH Deluxe.  Personally, I disabled JMicron in the BIOS as the drivers for it are pretty buggy from what I've read.  I'm just using the ICHR PATA/SATA Controller (I have an SATA disk and a PATA DVDRW).  I have it set to AHCI mode in the BIOS (this is the most compatible mode and faster for sata drives).  It might look like it's frozen during boot, but there is a device that causes problems and takes a minute or so for the kernel to give up on it and continue booting.
    If you want to use the JMicron controller, there is a flag you can pass to the kernel in your grub menu.conf (I think it's "ALL-GENERIC-IDE" (no quotes) and you might have to pass "irqpoll" as well.  I got it working once but haven't used it for a while, so this may have changed.  You might want to look into JMICRON_PATA.
    There are some issues with the linux kernel and the P5W.
    The bridge between the ICHR to the EZRaid controller isn't recognized by the kernel yet, so it will give some error messages and with a few 30 second pauses between them (which is a pain... I don't know of a way to disable the controller though).  I've heard that if you attach a SATA hard disks to BOTH the EZRaid controller and the ICHR it's supposed to avoid it, but I don't want to install an extra hard disk.
    The kernel seems to have have problems keeping time with the P5W.  I tried installing openntpd to help with it, but it only help a little... moving the clock by about 10 seconds every couple of minutes.  I found ntpd does a little better job (altering it by about 1 second every 5-10 minutes).  I think this is the cause of some glitches during video playback for me.
    I haven't had any luck getting any kind of suspend working with the P5W.  It can suspend, but it won't resume.  Resetting the computer after a suspend makes it freeze just before you can access the BIOS screen.  The only way to recover is to turn-off the power supply on the back for a minute or so and starting it up.  It will run for a few seconds and shutdown (some kind of weird hardware reset?).  After that it will boot normally.
    Let me know how your progress goes.  I'd like to know if you come across any fixes for the above.

Maybe you are looking for

  • Need multiple itunes accounts on one computer

    I have the video ipod and I just got my kids ipod shuffles. Can I have more than one itunes account on the same computer? I don't want my songs on their shuffles and I don't want to hear radio disney on my ipod! what can I do? Or is there a way to ma

  • Question about bill!!!

    I signed up of the Friends & Family plan back in 2009. When I signed up, my family got the 1400 mins, unlimited text + two extra lines added. Those extra lines cost $9.99, this we knew. Now, correct me if I'm wrong (And I've been checking online and

  • Device out of Memory - N95

    Hi. If i use my phone to surf the web i get the msg, phone out of memory please close some applications, well my web browser is the only app open, is there a way to stop this message or assign more virtual memory or something?

  • Error encountered when accessing the HPS Chart for a user

    i have a user account created on HPS. when ever i try to see the scorecard " chart" for - Employee, Accountability Element, Strategy Element am receiving the error text : " Exception An exception occurred processing your request. Contact your HPS Adm

  • Query performed well in dev but hanging on prod

    Hi DBAs, Urgent help is required on this issue. One of my sql query performed well in dev server, but now for 1 week it is hanging in prod server so, * How can i proceed to troubleshoot the problem. * What are areas i need to look for , and for what