Hyper V Integration Components of Windows 2012R2

Hi Team,
I am receiving the above error during installation of Hyper Integration Components of Windows 2012R2.
VM OS is windows 2008 std Sp2
Hyper is WIndows 2012 R2.
I have created a VM from Physical server to Virtual.
Please suggest me the solution

Hi Sr ,
You were using disk2vhd to P2V ？
Did you try to install integration services offline ?
Please refer to the article below :
http://blogs.technet.com/b/virtualization/archive/2013/04/19/how-to-install-integration-services-when-the-virtual-machine-is-not-running.aspx
Before doing this please try to copy the VHD to another VM and test .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Using DISM Cmdlets to upgrade Hyper-V Integration Components

Hi guys,
I'm using the Deployment Imaging Servicing Management (DISM) Cmdlets to programmatically upgrade Hyper-V integration components as VMs move about my environment. My code works fine, but I have a little issue:
I'm using a call to 'Add-WindowsPackage' to slipstream in the CAB package in. This works, but sometimes 2008 R2 VMs will immediately boot into the system recovery console -seemingly for no reason. This never happens with 2012 R1 or R2 VMs. This obviously
makes this process not unattended, and I want it to be totally unattended (with reporting to catch stuff).
Does anyone know a.) when this is happening and b.) can I somehow remove this recovery boot flag, is it like the dirty bit?
The weird thing is if I just progress into the recovery console something is changed in the VM and then it will boot just fine. There isn’t a problem with the IC upgrade, but something thinks there is. The logs for the DISM cmdlets are no help.
I don’t have System Centre and wont be using it, FYI.
Cheers!

Hi Hob,
Just a little clarification, Please also make sure you had added the right Integration Services package version to WIM file, because each version has a different installation package, it is very important that you select the correct package for the appropriate
OS.
Refer to:
Deploying Hyper-V Integration Services to VMs using Config Manager and DISM:
http://blogs.technet.com/b/manageabilityguys/archive/2013/09/05/deploying-hyper-v-integration-services-to-vms-using-config-manager-and-dism.aspx
If I have any misunderstanding, please feel free to let me know.
Best Regards,
Anna Wang

Loading Hyper-v devices drivers for Windows XP Task Sequence

I'm trying to create a Windows XP reference image using SCCM 2007 R3 with MDT 2010. XP installs and boots up but video, mouse, etc do not load. NIC is working so no network issues. When XP comes up I can't use the mouse
(a huge pain). From hyper-v client I can ""Insert Integration Services Setup Disk" but first, I have to close all the pop-up windows for "unknown devices". Since I don't have a mouse, it is difficult close those windows.
Can someone please advise how to load the hyper-v devices I have tried to make a package of the "vmghost.iso" then run "setup.exe /quiet /norestart" but this task fails in the task sequence.

Hi,
Please go to see if it is configured properly:
Installing
Hyper-V integration components in Windows XP when building reference image
You may also refer to the steps in the following article:
Creating
WinPE with Integration Services for Hyper-V
Regards,
Sabrina
This posting is provided "AS IS" with no warranties or guarantees, and confers no rights. |Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question.
This can be beneficial to other community members reading the thread.

Integration Service Upgrade of 2012R2 breaks Windows 2012 VM

Hi,
we have setup a new server with Windows 2012 R2 and migrated our VM's over to it.
OS within the VM's are Windows 2008 Server, Windows 7 and Windows 2012.
Everything works fine. Integration Service Update was needed and I could install it on all VM's, except one, that also runs Exchange 2013 on a Windows 2012.
Once I install the Update of the Integration Service, the VM acts weird. It takes about 30 minutes until I could log in. (Probably network problem after the udpate). Once logged in, if I switch to desktop view, the task bar doesn't show items other than
the clock, clicking it results in the question, if I want to end a hanging process no matter if I say yes/no no luck. Server Manager opens (very slow), but it doesn't load data (wanted to check nic).
CMD with ipconfig doesn't show a network adapter, just the tunneling-peudo-interface.
Load of the server doesn't show high CPU or Memory consumption, nor high disk i/o. Using Alt/TAB it shows a window called "Immersive Background" (tried to translate to english).
Starting the network manager via
control.exe /name Microsoft.NetworkAndSharingCenter
doesn't open it either. But I can open like Resourcemonitor, Powershell and quite some other programs.
So something is failing here after the update.
Does Exchange and the new Integration Service break each other?
I rolled back VM to an older snapshot and tried the same thing again, same result. On our Replication host, I did a Testfailover, with no network connectivity, everything fine, again, until new Integration service are installed/updated, the host seems broken.
So I have no clue what's happening here or where to start to search. The main problem is, that backups have to be done offline and not online until new integration services are up and running.
Any guess what to try or what breaks the new integration services? Or is it really in conjunction with Exchange?
We didn't upgrade the VM to 2012R2, just the root node.
Thanks
Patrick

Patrick N. _Futureweb OG,
Please use the following PowerShell to confirm your guest vm integration service has updated successfully, if not try to reinstall the IC.
Get-VM | ft Name, IntegrationServicesVersion
2. Please confirm your exchange vm the following service is running.
3. Please confirm your SYSTEM account have write permission on the following registry,
HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Svchost
If not
please add full permission on it.
4. In exchange vm the
System Device manager must have a “Microsoft
Hyper-V virtual machine Bus” device.
More related information:
Assign permissions to a registry key
http://technet.microsoft.com/en-us/library/cc728310(v=ws.10).aspx
Updating Hyper-V Integration Components (IC)
http://blogs.technet.com/b/rmilne/archive/2013/06/17/updating-hyper-v-integration-components-ic.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to specify only possible owner of the VM in Hyper-v cluster (Windows 2012R2)

Good day,
We want to prevent the migration of
virtual machines between the cluster nodes in indows 2012R2 Hyper-V cluster.
How to specify only possible owner of the VM in Hyper-v cluster (Windows 2012R2) ?
SQL clustering

Hi Al_leont,
I ask if your using FOCM or SCVMM as you configure possible owners in different places. As well as possible owners you can also configure preferred owners, affinity and anti affinity groups and placement rules.
To configure possible owner in FOCM you select the VM you want to configure, then in the bottom window select the resources tab (change from summary tab). Right click the Virtual Machine Resource, then select the Advance Polices tab of
the popup window. You should then see the hyper-V nodes as Possible owners.
In SCVMM you just right click on the VM and select properties, then settings form the popup window.
Preferred owners, affinity and anti affinity groups, placement rules are configured in other locations or by PowerShell.
Kind Regards
Michael Coutanche
Blog:
Twitter: LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Hyper-V Integration Services Stopped

Hi,
I have looked thru the forums and seem to be hitting a dead end or my search skills are failing. Anyhow, I have 2 Windows 2012 R2 DataCentre hosts running. They are running Hyper-v exclusively. I just noticed the other day that all the services for Hyper-V
are stopped except for Virtual Machine Management. If I click on any of the stopped services, it will start up then promptly stop. It will give an error of:
The Hyper-V x service on local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs. I have reviewed my Windows Event logs and there are no warning or errors.
Some other background, there is SCCM 2012 R2 (5.0.7958.1401) in the environment, but no SCCM agent is installed at the moment. There is also VMM 2012 (3.2.7672.0) and the agent for this is installed on both hosts. Both of the hosts have been re-imaged
in the last 2 months, so I don't think it's some weird age related weirdness. I also removed the hyper-v role from one of the hosts, rebooted and then re-added it. This made no difference. I also tried to add about of services to the restrictedservices in
the registry as I had come across this in the wild of the internet, but this made no difference.
Any thoughts, idea's?

Yes. As I explained. the Hosts are running an Bare Metal and not in a VM therefore these Integration Component services do not need to run.
The services you are calling out are specific to Windows when it is running within a VM. This is not a reflection of the hypervisor services that the Integration Components in the VMs hook in to.
In the settings of the VM you can enable the integration component presentation to a VM. And by default there is one option unticked. Check it.
And, on the host settings, enable Enhanced Session Mode.
(I believe that it is enhanced session mode that you are hunting for).
Also, you need to upgrade the Integration Components inside the VMs if you had not done that when you built them. Relying on what is packaged with the VM OS is not enough if the VM OS is older than the host.
Most likely what is happening is that the services are not enabled in the settings of the VM, or the ICs are not up to date within the VM. That is the most common cause for what you are observing, not some issue with the host.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

Remote App and Desktop RDP client never succeed to logon the RDS gateway server running Windows 2012R2

Remote App and Desktop RDP client never succeed to logon the RDS gateway server running Windows 2012R2
1. Client Os : Windows 7 Pro
2. Server OS : Windows Server 2012R2 with RDS broker and RDS Gateway server with 3.part Certificate with friendly name sky.mti-itservice.no activated.
The main problem is following: The RDP logon session never ends
Any ideas ?
Regards
Kenneth Knudsen
Email : [email protected]
mvh Kenneth Knudsen MCSE 2003 HP ASE

Hi Kenneth,
Here for your case suggest you to configure RDP session time limit so that your user can disconnect\log off once the specific time limit reached.
You can setup the session time limit in different method.
1. Open the Server Manager, select Remote Desktop Services.
2. In Remote desktop Services, in right side you can drop down to collections.
3. Select the collection which you want to edit the settings.
4. Under collections Properties, select Task and then Edit Properties.
5. In Properties dialog box, select Session.
6. You can find all thetimeout settings under session collection properties; edit according to your requirements and then OK.
And apart also by group policy setting as below.
Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Session Time Limits
User Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Session Time Limits
- Set time limit for disconnected sessions
- Set time limit for active but idle Remote Desktop Services sessions
- Set time limit for active Remote Desktop Services sessions
- End session when time limits are reached
Please check which setting suitable for your environment and you can apply for your case.
[Forum FAQ] Restrict number of Active Sessions in RDS 2012 and 2012 R2
https://social.technet.microsoft.com/Forums/en-US/00c2252b-8ec0-489f-8da2-07a434a9b5a2/forum-faq-restrict-number-of-active-sessions-in-rds-2012-and-2012-r2?forum=winserverTS
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Sharepoint 2010 on Windows 2012R2 and claims based authentication

Hello,
We have installed a sharepoint 2010 SP2 CU dec 2014 on a Windows 2012R2 server.
The installation went without problems.
However, we want to use claims based authentication on a certain web app pool.
Therefore some configuration on IIS is required.
The first issue we ran into, is the web application pool uses ASP.NET 2.0, which is the default settings.
However, using this ASP.NET Version 2.0 the feature "Providers" and ".net users" are invisible.
When changing the .net version to 4.0, the features comes back again.
I can fill in the connection strings without problem.
The providers feature however, gives me the following errors:
There is a duplicate .... sections defined.
When googling on this error, it seems that on .net 4.0 these sections are already globbally defined in the machine.config, So i removed these entries in the machine.config
These are the lines that are "double"
<section name="scriptResourceHandler" type="System.Web.Configuration.ScriptingScriptResourceHandlerSection, System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="false"
allowDefinition="MachineToApplication"/>
<section name="jsonSerialization" type="System.Web.Configuration.ScriptingJsonSerializationSection, System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="false" allowDefinition="Everywhere"
/>
<section name="profileService" type="System.Web.Configuration.ScriptingProfileServiceSection, System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="false" allowDefinition="MachineToApplication"
/>
<section name="authenticationService" type="System.Web.Configuration.ScriptingAuthenticationServiceSection, System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="false"
allowDefinition="MachineToApplication" />
So after removing these lines, i can get into Providers feature in IIS.
but, when i click on "Add..." i get the following error:
Add Provider
There was an error while performing this operation.
Details:
This method cannot be called during the application's pre-start initialization phase.
OK
I spent to much time already to solve this issue and i hope that someone can give me some advice to address this issue.

The STS web.config:<?xml version="1.0" encoding="utf-8"?>
<configuration>
<system.serviceModel>

<behaviors>
<serviceBehaviors>
<behavior name="SecurityTokenServiceBehavior">

<serviceMetadata httpGetEnabled="true" />

<serviceThrottling maxConcurrentCalls="65536" maxConcurrentSessions="65536" maxConcurrentInstances="65536" />
</behavior>
</serviceBehaviors>
</behaviors>

<services>
<service name="Microsoft.IdentityModel.Protocols.WSTrust.WSTrustServiceContract" behaviorConfiguration="SecurityTokenServiceBehavior">

<endpoint address="" binding="customBinding" bindingConfiguration="spStsBinding" contract="Microsoft.IdentityModel.Protocols.WSTrust.IWSTrust13SyncContract" />

<endpoint name="ActAs" address="actas" binding="customBinding" bindingConfiguration="spStsActAsBinding" contract="Microsoft.IdentityModel.Protocols.WSTrust.IWSTrust13SyncContract" />

<endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange" />
</service>
<service name="Microsoft.SharePoint.Administration.Claims.SPWindowsTokenCacheService">
<endpoint address="" binding="customBinding" bindingConfiguration="SPWindowsTokenCacheServiceHttpsBinding" contract="Microsoft.SharePoint.Administration.Claims.ISPWindowsTokenCacheServiceContract" />
</service>
</services>

<bindings>
<customBinding>
<binding name="spStsBinding">
<binaryMessageEncoding>
<readerQuotas maxStringContentLength="1048576" maxArrayLength="2097152" />
</binaryMessageEncoding>
<httpTransport maxReceivedMessageSize="2162688" authenticationScheme="Negotiate" useDefaultWebProxy="false" />
</binding>
<binding name="spStsActAsBinding">
<security authenticationMode="SspiNegotiatedOverTransport" allowInsecureTransport="true" defaultAlgorithmSuite="Basic256Sha256" messageSecurityVersion="WSSecurity11WSTrust13WSSecureConversation13WSSecurityPolicy12" />
<binaryMessageEncoding>
<readerQuotas maxStringContentLength="1048576" maxArrayLength="2097152" />
</binaryMessageEncoding>
<httpTransport maxReceivedMessageSize="2162688" authenticationScheme="Negotiate" useDefaultWebProxy="false" />
</binding>
<binding name="SPWindowsTokenCacheServiceHttpsBinding">
<security authenticationMode="IssuedTokenOverTransport" />
<textMessageEncoding>
<readerQuotas maxStringContentLength="1048576" maxArrayLength="2097152" />
</textMessageEncoding>
<httpsTransport maxReceivedMessageSize="2162688" authenticationScheme="Anonymous" useDefaultWebProxy="false" />
</binding>
</customBinding>
</bindings>
</system.serviceModel>
<system.webServer>
<security>
<authentication>
<anonymousAuthentication enabled="true" />
<windowsAuthentication enabled="true">
<providers>
<clear />
<add value="Negotiate" />
<add value="NTLM" />
</providers>
</windowsAuthentication>
</authentication>
</security>
<modules>
<add name="WindowsAuthenticationModule" />
</modules>
</system.webServer>
<system.net>
<connectionManagement>
<add address="*" maxconnection="10000" />
</connectionManagement>
</system.net>
<connectionStrings>
<add connectionString="Server=sqldb_qa_sharepoint2010;Database=SG_SHP_Claims_Authentication;Integrated Security=true" name="SHP_Claims_Authentication" />
</connectionStrings>
</configuration>
I have backupped the machine.config and restored it (the file i edited was in the following dir: C:\Windows\Microsoft.NET\Framework\v4.0.30319\Machine.config)

Installing Essbase Server on Linux, Other essbase components on windows.

Hello all,
We are planning to upgrade from 11.1.1.4 to 11.1.2.2. We have just the essbase server installed on linux and other essbase components like Essbase Administration Services, essbase integration services, provider services installed on Windows. My question is how do I go about gathering files to install just the Essbase Server on Linux and other Components on Windows. I have gone through the Media Pack doc for Windows 2008 64(on which we plan to install the other essbase components). In that if I click on the files needed for essbase(listed as essbase plus) it gives me all the files needed to install essbase components.Which means(correct me if am wrong) on a server where am planning to install just essbase components like Provider services, Essbase Admin Services and provider services it gives me the files needed for Essbase server as well, which I donot need. So how do I go about accomplishing this. Or are there any other ways to achieve what am trying to do.
Thanks,
Ted.

Awesome, thats what I thought, so in that case, if I want to install Essbase server on Linux, I have to download the essbase files for linux and select only the essbase server while installing, and if I want to install essbase components on windows, I have to download the same set of files but for Windows OS and select to install only the essbase components that I need. Is that right?
Thanks,
Ted.

Event ID 4097 Hyper-V-Integration-VSS

Hello,
Trying to figure out why I'm getting Event ID 4097 Hyper-V-Integration-VSS after the backup runs. The event says:
"The Virtual machine A9BCE8FC-FB7A-463A-B4F3-3A6AE83446B7 cannot be backed up since it has dynamic disks in it"
These starting to appear after I had to add another virtual hard disk to my Exchange 2010 VM. Everything is working fine and the backups complete successfully. The backup is being done by CA ArcServ. I also get the same errors if I use Windows
Server Backup as well. The second additional virtual hard drive is a fixed disk, not dynamic.
Dose anybody know why I"m getting these and how to fix it so they go away?

Hi,
It is by design. Virtual machine will pause if it takes Online Backup when VM has Dynamic Disk inside. Virtual machines that use dynamic disks or the FAT32 file system prevent an online backup from being performed.
You could change Dynamic Disk to Basic. If not, you could ignore the pause states.
Backing Up Hyper-V Virtual Machines
http://blogs.technet.com/b/virtualization/archive/2008/08/29/backing-up-hyper-v-virtual-machines.aspx
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Hyper-V Integration Services - DriverPackage or Application

Hello SCCM community,
currently we are deploying the Driver for Hyper-V Integration Services (Windows6.x-HyperVIntegrationServices-x64.cab) as Driver Package. The deployment is OK. But if I look into Device Manager the drivers are not digitally signed. This is somehow
strange.
Deploying via DISM will result in same issue.
I did then a research and found out that the package can be deployed via Application by using the MSI file. http://social.technet.microsoft.com/Forums/en-US/dd58b4cf-a954-4525-9a05-a84ebb073002/install-integration-components-hyperv-30-with-sccm-2012?forum=configmanagergeneral
I tested the installation via MSI it works fine and the Device Manager is not complaining about not signed drivers.
Do you face the same issue? Are you also deploying via Application?
Many thanks in advance.
Guitarman

Ok, guys I did like described in the link. I used the setup.exe and deployed it as application.
As detection method I used one of the sys-files which where installed.
As uninstallation command I used: dism /online /Remove-Package /PackagePath:\\share\software$\Windows6.x-HyperVIntegrationServices-x64.cab
/norestart

Migrate windows 2003r2 AD to windows 2012r2 AD and exchange 2003 to exchange 2013 Steps

Hi
requesting advice,
how can i migrate windows 2003 ad + windows 2003 exchange to windows 2012r2 AD+ exchange 2013 DAG (planing to implement 2 mail box and 2 hub+cas hyper-v vm servers )
kindly guide me how can i migrate and what is the best practice method
requesting step by step procedures to follow
Regards
Ratheesh
Ratheesh

Hi Ratheesh,
Migrating AD from Windows Server 2003 domain to Windows Server 2012 R2 domain:
Introducing the first Windows Server 2012 Domain Controller (Part 1 of 2)
http://blogs.technet.com/b/askpfeplat/archive/2012/09/03/introducing-the-first-windows-server-2012-domain-controller.aspx
Step-By-Step: Active Directory Migration from Windows Server 2003 to Windows Server 2012 R2
http://blogs.technet.com/b/canitpro/archive/2013/05/27/step-by-step-active-directory-migration-from-windows-server-2003-to-windows-server-2012.aspx
Since we cannot migrate Exchange 2003 to 2013 directly, you can either migrate to Exchange 2007 or Exchange 2010 then to Exchange 2013.
Checklist: Upgrading from Exchange 2003 and Exchange 2007
http://technet.microsoft.com/en-us/library/ff805038(v=exchg.141).aspx
Checklist: Upgrading from Exchange 2003
http://technet.microsoft.com/en-us/library/ee332309(v=exchg.141).aspx
Part 1: Step-by-Step Exchange 2007 to 2013 Migration
http://blogs.technet.com/b/meamcs/archive/2013/07/25/part-1-step-by-step-exchange-2007-to-2013-migration.aspx
Checklist: Upgrade from Exchange 2010
http://technet.microsoft.com/en-us/library/ee332309(v=exchg.150).aspx
I hope this helps.
Amy

Outlook-Integration: User-Signatur / B1 Integration-Components: Tomcat

Hallo zusammen,
2 Fragen an die SBO 8.8-Spezialisten:
a) Wir haben die Outlook-Integration installiert.
Dabei bin ich auf ein Problem gestossen, zu dem es bereits einige Foreneinträge gibt.
Aber ich muß nochmals nachhaken:
Gibt es in SBO 8.8 PL 17 die Möglichkeit, für die E-Mails der einzelnen User deren
eigene Signatur zu hinterlegen?
Oder kennt jemand einen "Workaround"?
b) Für die iphone-Anbindung ist die Installation der Integration-Components erfolgt.
Aber die Verbindung zum B1iserver funktioniert nicht.
Wahrscheinlich liegt dieses an dem Dienst SAP-Tomcat, der sich nicht starten läßt.
Ich habe bereits lange im Internet geforscht, bin aber bisher nicht fündig geworden.
Hat vielleicht irgendjemand eine Idee, woran das liegen könnte?
Es wäre schön, wenn sich zu diesen Themen jemand melden würde.
Danke!
Marielen Drees

> b) Für die iphone-Anbindung ist die Installation der Integration-Components erfolgt.
> Aber die Verbindung zum B1iserver funktioniert nicht.
> Wahrscheinlich liegt dieses an dem Dienst SAP-Tomcat, der sich nicht starten läßt.
> Ich habe bereits lange im Internet geforscht, bin aber bisher nicht fündig geworden.
> Hat vielleicht irgendjemand eine Idee, woran das liegen könnte?
Hallo Marielen,
schau doch mal in die Windows Ereignisanzeige. Dort sollte eine Fehlermeldung abgelegt werden, wieso Tomcat nicht startet.
Gruß Steffen

Can't install Virtual PC Integration Components wXPSP3 virtual machine

Install fails when trying to install one of the drivers - vpcgbus.inf. I tried installing the driver manually and I get this error:
Fatal error during install. The device status in the properties of the devices are:
Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)
Any ideas?
Below is the relevant part of the log file from the MSI install
ction 16:08:31: RegisterProduct. Registering product
RegisterProduct: {B0950C40-269A-11DD-BD0B-0800200C9A66}
Action 16:08:31: PublishFeatures. Publishing Product Features
PublishFeatures: Feature: VAudio
PublishFeatures: Feature: VMServicesFeature
PublishFeatures: Feature: VideoDriver
PublishFeatures: Feature: OSSupportFiles
PublishFeatures: Feature: MouIntFeature
PublishFeatures: Feature: VPCBus
PublishFeatures: Feature: VPCUSB
PublishFeatures: Feature: VWAGPDll
PublishFeatures: Feature: VWARedirectExe
Action 16:08:31: PublishProduct. Publishing product information
1: VMAdds.ico
1: {B0950C40-269A-11DD-BD0B-0800200C9A66}
Action 16:08:31: CA_RollbackInstallWindowsNTVMServicesDriver.
Action 16:08:31: CA_RollbackInstallVideoDriver.
Action 16:08:31: CA_RollbackInstallVPCBusDriver.
Action 16:08:31: CA_RollbackEnableAllRAILSettings.
Action 16:08:31: CA_ChangeVMServicesServiceRecoveryOptions.
Action 16:08:31: CA_InstallVideoDriver.
Action 16:08:38: CA_RollbackInstallMouseIntegrationFilterDriver.
Action 16:08:38: CA_RollbackInstallVPCUSBDriver.
Action 16:08:38: CA_InstallMouseIntegrationFilterDriver.
Action 16:08:39: CA_DisableVAudio.
Action 16:08:40: CA_InstallVPCBusDriver.
VPCBUS: Done Get System Folder Location
VPCBUS: UpdateDriverForPlugAndPlayDevices using C:\Program Files\Virtual PC Integration Components\VPCGBus.inf
VPCBUS: UpdateDriverForPlugAndPlayDevices failed with 1603
Action ended 16:08:49: InstallFinalize. Return value 3.
Action 16:08:49: Rollback. Rolling back action:
Rollback: CA_InstallVPCBusDriver
Rollback: CA_DisableVAudio
Rollback: CA_InstallMouseIntegrationFilterDriver
Rollback: CA_RollbackInstallVPCUSBDriver
Rollback: CA_RollbackInstallMouseIntegrationFilterDriver
Rollback: CA_InstallVideoDriver
Rollback: CA_ChangeVMServicesServiceRecoveryOptions
Rollback: CA_RollbackEnableAllRAILSettings
Rollback: CA_RollbackInstallVPCBusDriver
VPCBUS: SetupCopyOEMInf failed with 2
Rollback: CA_RollbackInstallVideoDriver
Rollback: CA_RollbackInstallWindowsNTVMServicesDriver
VMSRVC_Uninstall: Could not get driver handle.
Rollback: Publishing product information
Rollback: Publishing Product Features
Rollback: Registering product
Rollback: Starting services
Rollback: Installing new services
Rollback: Writing system registry values
Rollback: CA_ExecuteCDEjectNT
Rollback: Copying new files
Rollback: Deleting services
Rollback: Stopping services
Rollback: Updating component registration
Rollback: CA_RestoreMouseDriverOnMajorUpgrade
Action ended 16:08:57: INSTALL. Return value 3.

You are a life saver. I had the same issue. At very last step my installation was rolling back. ... following your steps fixed the issue.... thank you so much...
SSIS-Tutorials-FAQs |
Convert DTS to SSIS |
Document SSIS |
SSIS Tasks |
Real-time SSIS Monitoring

Error in Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Hello Everyone,
I am a regular user of I-tunes but recently i dont know why but I got some error in Launching I-tunes. So as recomonded by "Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7" section. I started removing the products. But after removing Quick time, I tried to remove Apple Software Update but while uninstalling it gave error that "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor." and the uninstall rollbacks.
Please send me a feasible solution to this problem.
Thank You.

Uninstalling the iCloud control panel should allow you to do that folder deletion.

Hyper V Integration Components of Windows 2012R2

Similar Messages

Maybe you are looking for