Hyper v machine not initialize

in Server 2008 r2 i created a machine in hyper-v but when try to start it gives error machine could not start. i already enabled vt and dep.

Hi Sandeep,
Maybe the issue is relevant to CPU AVX feature , please refer to following link:
http://support.microsoft.com/kb/2517374/en-us
Hope it helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Hyper-V could not initialize (rights?)

Hello,
I have an WIN2012 R2 Server.
Unfortunatley it is serving as a DC (I know this is not recommended).
I set up the HYPER-V role and when I start I receive with a newly created VM (no etwork connected yet):
'TEST111' could not initialize. (Virtual machine ID 49608249-F381-43E8-BCCF-F6C61CDE68A0)
Event ID 3040
Most likely it has something to do with the rights. I tried to apply this thread, but no luck:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/ae8a90a2-4251-4fbd-b644-72dcd4b5f08c/error-an-attempt-to-initialize-vm-saved-state-failed-when-starting-any-vm?forum=winserverhyperv
I reinstalled the role and it still does not work. It looks like the old Settings of the hyper-v program stay on the machine after deinstalling the role, because after the reboots and Setting it up again it Shows the old Settings.
The process Monitor Shows:
HKCR\Applications\vmconnect.exe : NAME NOT FOUND Desired Access: Read.
Q:
Is there a way to completly clean the hyper-v stuff?
It might be that hyper-v only accepts local admin users (especially on a DC)?

Hi,
The not recommend setting up often cause complex issue and hardly to locate the problem point when you troubleshooting, I don’t have the same environment but after you install
the Hyper-V role, the Hyper-V Administrators local group will created automatically, Please confirm your current user is the member of the Hyper-V administrators group user.
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

All VM's on hyper-v fail to start with ' guest could not initialize'

This afternoon I tried to startup a VM and got the message '<guest> could not initialize'. I checked some other VM's, the same message. I had a VM running, stopped that one and tried to start it again, the same message: 'could not initialize'.
I checked the bios, all settings are correct.
I uninstalled (turned off) the hyper-v feature, rebooted the machine twice, checked with CPU-Z to see if VT-X was enabled; it was.
Turned hyper-v on again, rebooted. And I still have the same error message....
I have seen this error on the forum, but sofar I have not found an answer.
Regards,
Rolf Koolma
My system:
Microsoft Windows Enterprise (MSDN version) on an AMD Phenom II X6 1090T

Hi Rolf,
How about the current situation? Did you confirm your consideration?
Please note to backup your registry before doing any changes on registry.
And then I also would like to suggest you read this blog that is aiming at this kind of issue:
Hyper-V Could Not Initialize - Could Not Create or Access Saved State File
http://blogs.technet.com/b/rmilne/archive/2014/01/15/hyper-v-could-not-initialize-could-not-create-or-access-saved-state-file.aspx
Karen Hu
TechNet Community Support

Could not initialize machine remoting system. Error: 'Element not found.'(0x80070490).

Hi
I am getting this error when trying to start a VM in a Windows 2008 R2 Hyper-V ( all updated applied )
'vm-xx' could not initialize machine remoting system. Error: 'Element not found.'(0x80070490).
Does anyone experienced this error?
I found one update, KB967902 but it is for Windows 2008 Hyper-V not for R2
If this post is helpful, please mark it as such
Alessandro Cardoso
MVP | Microsoft Heroes | MCT
blog: http://itaustralia.spaces.live.com
http://cardosoalessandro.spaces.live.com

Hello
Alessandro,
I wrote about this error in the following KB and blog post.
Please let me know if they are helpful.
Error 2912 when a Virtual Machine Manager 2008 operation fails due to a certificate issue: "Element not found (0x80070490)"
http://support.microsoft.com/kb/971264
http://blogs.technet.com/b/mbriggs/archive/2009/05/08/vmm-operation-fails-with-error-2912-0x80070490-due-to-a-certificate-issue.aspx
Best Regards, Mike Briggs [MSFT]
– Posting is provided "AS IS" with no warranties, and confers no rights

Hyper-V could not replicate changes for virtual machine 'machinename': The connection with the server was terminated abnormally (0x00002EFE).

I have a 3 node cluster that has replica setup to replicate to another cluster off-site.
Suddenly one of the servers is not replicating with the error:
Hyper-V could not replicate changes for virtual machine 'machinename': The connection with the server was terminated abnormally (0x00002EFE). (Virtual Machine ID CC0FD4CC-F9B7-4C68-ABE8-B7D52A87899F)
All other servers are replicating fine so there cannot be a permissions or connectivity issue between the 2 clusters.
This server has 2TB of data so I'd rather not have to start the replication again.
Does anyone have any pointers?
Thanks.

Hi drensta,
Based on my knowledge , "hyper-v replica broker " is needed for failover cluster replica .
Here is a link for "Why is the "Hyper-V Replica Broker" required?"
http://blogs.technet.com/b/virtualization/archive/2012/03/27/why-is-the-quot-hyper-v-replica-broker-quot-required.aspx
Hope this hleps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Could not initialize the Java Virtual Machine

While trying to configure the turnkey product I encounter an error in starting the JBoss for Adobe LiveCycle ES v8.0 service. The JBossService.exe ends up showing in the task list - but the service shows its status as "starting" and an enty stating: "Could not initialize the Java Virtual Machine" is placed in the event log. I've seen a posting on this form that traced at least some of these symptoms to the account under which the service is configured to run - but I don't believe that solution applies in this case - I'm starting the service under the System Account which has all the permissions it needs to start the service.

Thanks very much for the suggestion. Indeed, the problem turned out to be memory related - I was able to correct the issue by updating the registry keys "JVM Option Number 4" and "JVM Option Number 5" so specify lower values. For some reason the system didn't like the 1024 meg size that was set by default (our server has 2 gig of memory).

Could not initialize the Java virtual machine. Program will exit

Hi!
I am trying to install jdk-1_5 using jdk-1_5_0_06-windows-i586-p.exe. The entire installation runs fine till the end when we get the following error message.
*"could not initialize the Java virtual machine. Program will exit"*
Any idea as to what I may be missing out on.
Thanks a lot,
Rohit

is it creating any log file in the install directory ? do you have admin rights on the PC ? Not sure if it needs admin rights to install 1.5, but just a thought .. have u tried this on any other machine ?

Type 2 Virtual Machine in Hyper-V will not PXE boot with WDS

Hi
Bit of a wierd scenario this but I'm doing a bit of a lab experiment kind of thing. The setup is as follows:
VMWare Workstation 10 with Windows Server 2012 R2 running as a virtual machine. In VMW10 I have a NAT network interface and a Bridging interface set to load with the virtual machine. These seem to work fine (although the NAT doesn't seem to want to connect
to the internet but that's why the bridging one is there in addition).
Server 2012 is configured with the following roles:
ADDS, DHCP, DNS, Hyper-V, Printer, WDS
I have correctly configured WDS to work on the same machine as DHCP and I can get PXE boot working with WDS on a Type1 Virtual Machine in Hyper-V using the Legacy Network adapter. My problem is when I try and PXE boot on a Type2 Virtual Machine (this type
is new in R2 and should eliminate the need for a legacy network adapter) using the same network interface that I used for the Type1 machine, I get an IP address from DHCP but WDS doesn't seem to respond. Instead I get the "PXE-E16: No Offer Received"
message. I have tried just about everything I can think of and spent the whole day trying to figure out why this is the case but came up with nothing. Has anyone else encountered this or can anyone shed any light on the matter?
Many thanks in advance

"VMWare Workstation 10 with Windows Server 2012 R2"and "Server 2012 is configured with the following roles: ADDS, DHCP, DNS, Hyper-V, Printer, WDS"
Hyper-V is not supported to be run as a VM. It is a Type 1 hypervisor, which means it works on the bare metal. You have it running as a VM on a Type-2 hypervisor, so it has no access to the bare metal. Yes, VMware may have made it so some
things work in that environment, but it is not a supported (or tested) environment for Hyper-V.
.:|:.:|:. tim

Virtual Machine Not Starting

Hi All,
After creating my virtual machine, and I click start, I get the following errors:
An error occurred while attempting to start the selected virtual machines. 'Test Server' could not initialize.
I have already enabled the VT of the processor and Execute Disable Bit in the BIOS but each time I get the same problem. I have even removed the Hyper-V role and added it again, but no luck. Note that the environment is Windows Server 2008.
Can someone please tell me what I am missing?
Thanks

Hi Crystol,
Have you checked\found anything on event logs.
Check logs under Hyper-V-Worker node under Applications and Services Logs for anything related.
Refer to the below KB article:
"This issue occurs because Windows Server 2008 R2 does not support the AVX feature."
Intel CPU:
http://support.microsoft.com/kb/2517374/en-us
AMD CPU:
http://support.microsoft.com/kb/2568088/en-us
Find out if you CPU supports AVX, if yes use the workaround to fix Hyper-V.
Hope you have already checked out below article:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/c70880d0-6d42-405a-b630-d6b56a7539d9/hyperv-manager-name-could-not-initialize?forum=virtualmachingmgrhyperv
Regards,
Satyajit
Please“Vote As Helpful”
if you find my contribution useful or “MarkAs Answer” if it does answer your question. That will encourage me - and others - to take time out to help you.

Could not initialize Photoshop because the disk is not available

I get this message when I try to startup Photoshop:
"Could not initialize Photoshop because the disk is not available."
I found a fix in Tech Notes about selecting the scratch disk and choosing ignore permissions, but I don't even remember what the scratch disk was, so I don't really know how to select ignore permissions on it.
Does anyone know another way to fix this. It seems like this must be some "login-local" preference (meaning that there must be something in the user's local preferences for setting this scratch disk parameter (the only reason I'm thinking this is that if I create another user and run Photoshop, I get no error.)
I looked through ~/Library/Application Support/Adobe for any kind of Photoshop Preference, but I couldn't find a specific preference that stood out. Anyone have an idea?

I just got the same message, "Could not initialize Photoshop because the disk is not available". I had just assigned my primary scratch disk to an internal drive that was empty and had lots of free space. When I restarted my machine, the error message appeared when I tried to open Photoshop.
Not sure why this error occurred, but deleting the preferences did fix that problem... unfortunately, doing that will reset all your prefs = pallets, brushes, actions. I suspect you could just delete the "Adobe Photoshop CS2 Prefs.psp" file and leave the others intact to avoid that.
I would still like to know why changing the scratch disk gives us this problem? I mean, isn't that the whole point of having another internal drive?
- JA

ASMlib will not initialize after reboot. OEL6.6

Greetings,
After some routine maintenance and cleaning up trace and alert logs on a dev server, a reboot was performed.
When the server came back up, the ASMlib would not initialize, and the /dev/oracleasm/disks folder was gone. ASMlib has been in use since day one on this machine, and has given no troubles in six months of operation.
Querying the disks shows that the headers are still intact, and that they are labelled as ASM disks.
Attempting to re-configure via /etc/init.d/oracleasm configure lead to no success.
I've also uninstalled and re-installed the oracle asm packages.
[root@oraserver~]# rpm -qa | grep asm
kmod-oracleasm-2.0.8-4.el6_6.x86_64
oracleasm-support-2.1.8-1.el6.x86_64
a tail of /var/log/oracleasm shows:
tail -f /var/log/oracleasm
Unable to instantiate disk "VOL2"
Loading module "oracleasm": failed
Unable to load module "oracleasm"
Loading module "oracleasm": failed
Unable to load module "oracleasm"
Creating /dev/oracleasm mount point: /dev/oracleasm
Loading module "oracleasm": failed
Unable to load module "oracleasm"
Loading module "oracleasm": failed
Unable to load module "oracleasm"
kernel:
uname -r
2.6.32-504.1.3.el6.x86_64.debug
at this point, I'm out of ideas, and google has not been terribly helpful. Has anyone else run across this before? I'll get what ever information you might need to help suss out a cause.
Thanks for your time,
Ken

Cleaning the database diag directories cannot affect ASMLib. The problem must be something else. Since all the ASM device and diskgroup information is stored on the disks, it should be sufficient to simply re-install and reconfigure the software.
All ASMLib installations require the oracleasmlib and oracleasm-support packages in addition to the kernel driver, which is built-in only if you are using the Oracle UEK kernel. You might be missing the oracleasmlib package.
Perhaps the following will solve the problem:
su - root
wget http://download.oracle.com/otn_software/asmlib/oracleasmlib-2.0.4-1.el6.x86_64.rpm
yum install ./oracleasmlib-2.0.4-1.el6.x86_64.rpm
/etc/init.d/oracleasm configure

Could not initialize class sun.awt.X11.XToolkit

hi all
String fileName = "c:/test/one.jpg";
Image imgg = Toolkit.getDefaultToolkit().getImage(fileName);
ImageIcon img = new ImageIcon(imgg);
imgDim = ""+img.getIconHeight();
when i run this code in linux machine am getting the error Could not initialize class sun.awt.X11.XToolkit....but its runnig on windows machine.. is there anything wrong wiht my code........pl help me any1 out of dis

here http://rapid-i.com/rapidforum/index.php?topic=366.0
they talk about adding to the JVM options a "-Djava.awt.headless=true"

RDS server message: could not initialize class com.adobe.rds.core.services.Messages

I just moved to a new host with my own dedicated cloud server. Using CF9. Everything seems to be working fine with the server, but i get the following error when connecting to it via RDS through CF Builder 2.
RDS server message: could not initialize class com.adobe.rds.core.services.Messages
I get it when i first connect to the server, then if i try to access it again, it will let me in. I also get an error when i try to open the first file. Then its ok.
I have no idea what it can be, i have not run into this on any other server that I have connected to.

Hello,
After 2 months of it not working for love or money. I got a new machine and ColdFusion Builder 2 and started over. It worked for a while. Then when the trial version timed out a few days ago it killed it again. With the same error. So it is definitely something that gets “switched” within the code or configuration settings. Rebooting about 3x seemed to fix it this time after entering the license number.
Yes to answer your questions below. Yes, I did all those things below. Re-checked and checked numerous times. Keep in mind the installation there worked for over a year then all of a sudden stopped. I hadn’t changed anything at all. And it just stopped dead, started throwing up that error.
I asked all the experts in my office. One guy knows CF and Java inside and out and could not figure it out. I searched the web and the issue is listed many times but with no real answers.
Thanks for getting back to me. I am up and running with new machine. But since I’ve seen the error on this machine now, I live in fear it will reappear and stop working. So if you come up with any thoughts I would appreciate it.
Thanks,
-Lyle

Jdeveloper - Could not initialize class javax.swing.KeyStroke

I am trying to install jdeveloper on a new machine, I have installed latest JDK from sun and downloaded the jdevstudiobase101033.zip file, however once I have followed the instructions to install on linux (Fedora core 11 - 64bit) and try to fire jdev up using jdev/bin/jdev I get the following error message:
Oracle JDeveloper 10g 10.1.3.3
Copyright 1997, 2007 Oracle. All Rights Reserved
java.lang.NoClassDefFoundError: Could not initialize class javax.swing.KeyStroke
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Class.java:169)
     at oracle.ide.IdeCore.class$(IdeCore.java:98)
     at oracle.ide.IdeCore.startupImpl(IdeCore.java:816)
     at oracle.ide.Ide.startup(Ide.java:674)
     at oracle.ideimpl.Main.start(Main.java:49)
     at oracle.ideimpl.Main.main(Main.java:25)
I have trawled through google and forums at oracle with no joy, could someone kindly give me some pointers as to what I have missed or what may be wrong ?
Thanks
Ian

It is running the 32 bit JDK, the 64 bit threw up errors even earlier in the startup porcedure.
Ian

Share Hyper-V machine between 2 Windows 8.1 OS

Hi,
I have a laptop with dual boot on two Windows 8.1 OS.
I have Hyper-V on both Windows 8.1 installation. One boot for work and other for personal use.
But sometime i need to work in my hyper-v machine in the both Windows 8.1 installation.
It is possible du share hyper-v machine between the OS ? Is not very useful to export or copy the vm each time i need to boot in my other Windows 8.1.
Thank you!

Yes, you can do that, but ...
You would need to create two VMs, one in the Server and one in the Client. But they could point to the same directory - make another partition on your laptop that has the same drive letter on both platforms. You would actually share just the
VHDX file. You might be able to import in place on one platform after creating the VM on the other platform, but I think it would be safer to simply have new VM definitions on each system.
.:|:.:|:. tim

Hyper v machine not initialize

Similar Messages

Maybe you are looking for