Hyper-V Networking Issue

Question

I have a Windows 8.1 Pro with Media Center Computer - The computer works perfectly fine/normal until I install Hyper-V.
Once I install Hyper-V the Windows Store and any of the apps do not detect an internet connection; in desktop mode the internet is working normally and in the Network Connections I can see the virtual network adapters as connected to my wireless network
and I can see a virtual switch that is connected to it. The Windows Phone adapter is stuck on identifying.
The internet works fine in the Windows Phone Emulator despite being stuck on identifying in Network Connections but it does not work inside a Windows 10 virtual machine even though I am using the same virtual adapter as my computer, in Windows 10 the adapter
shows as identifying, If I try troubleshooting it cannot find any problems, I cannot ping to anything except 127.0.0.1.
I have tried every type of Windows Store troubleshooting you could possibly imagine, from wsreset.exe to running the AppsDiagnostic.diagcab file.
The only reason I am posting here is because of the VM for Windows 10 didn't work I thought I'd try removing and re-adding Hyper-V; I realised that once I had removed Hyper-V the Windows Store started working again. 
After reinstalling Hyper-V I fiddled around with the virtual adapters such as ticking every box but this did not make a difference.
I have also tried deleting the virtual adapters from Network Connections but the Windows Store still did not work. I have then tried re-adding the virtual adapters but still the Windows Store/apps and VM don't detect an internet connection.
I have tried searching online for a solution for this problem but I cannot seem to find a way to troubleshoot this I do not know what the connection between Hyper-V and the Windows Store/apps could be to cause this fault. I think this must be some kind of
networking issue but I don't know where else I can look besides Network and Sharing Center.
I have also tried updating the networking adapter on my computer but it does not find any updates.
I would like to just not use Hyper-V and use a different program but Visual Studio 2013 Professional tells me that I need Hyper-V installed for the Windows Phone Emulator to work, so I need to find a way to fix this problem.
I hope that I have been descriptive enough for someone to know what the issue is, hopefully it is something really simple.
Pepsi-Josh

Answer 1

This resolved my problem
This issue might occur if the network connection services and the connection hierarchy permissions are not set appropriately.
I would suggest you to change the network connection type to private and check if it fixes the issue. Follow the methods listed below:
Method 1:
Follow the steps below to change the connection type to private network and check if it resolves the issue:
Press Windows+C keys and click on Settings.
Right click or press and hold on your network connection and click/tap on Turn sharing on or off.
Select the option “Yes, turn on sharing and connect to devices: For home and work networks”.
If prompted by UAC, then click/tap on Yes.
Sign-out and sign-in again to the user account. Verify the results. If the issue still persists, proceed to the next method.
Method 2:
Let’s check if the network service are running and there is proper permission given to the network hierarchy. Follow the steps given below:
Step 1:
To check for the network services:
Press Windows+R keys and type “services.msc”. Hit Enter.
Locate Network Location Awareness service and right click on it. Choose Properties.
Set Startup type to Automatic and service status to Start. Go to Dependencies tab on the same window and take a note of the services listed.
Click on Apply and then go to Service.msc window. Locate all the dependency service and ensure that they are running in Automatic mode.
Follow the same steps for Network List Service and ensure that it’s dependent services are running as well.
Proceed to step 2.
Step 2:
Follow the steps listed below to set appropriate permission for Network List hierarchy under Registry:
Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps
carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, you can refer to the following steps to back the registry
files on the computer:
Press Windows and R keys to open the run box.
Type ‘regedit’ and press Enter from the keyboard.
Open the file option on the menu bar.
Click on Export and save the file with a name on the desktop.
If you want to restore the file, you can do so by double clicking the file that you have saved on the desktop.
Press Windows+R keys and type “regedit”. Hit Enter.
Navigate to the following location:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkList
Right Click on NetworkList and choose Permission. Ensure that Full permission is allowed for the users other than that of the administrator.
Now, click on “Advanced” option. Check the box that says “replace all child object permissions with inheritable permissions from this object”.
Click on Apply and then on OK. Click on OK again.
Close regedit window.
Re-check the status of the service (as suggested in step 1).
Restart the computer if needed. Check if it resolves the issue.
For reference:
http://windows.microsoft.com/en-ca/windows/cant-connect-to-network#1TC=windows-8
Download and install the latest network driver for Windows 8 for the wireless card from Asus's website:
http://www.asus.com/us/Networking/USBN53/#support
Wired and wireless network problems
Pepsi-Josh