Hyper V not available in Windows 8.1
Hi,
I am running Windows 8.1 on my computer which has i7 processor and virtualization enabled in NetBios.
But unfortunately,Hyper-V is not available in the list of features to be installed.
Any suggestions?
Thanks and Regards, Siva Kumar Balaguru
Hi Siva,
Can you post the screenshot like mine below please ?
I need a screenshot of the processor info in the task manager like the below
Also which version of Windows 8.1 are you using ?
X86 or X64 and Enterprise or Pro ?
Gautam.75801
Similar Messages
-
Merant Driver is not available for Windows 7 to create data warehouse table
Hi All,
I had installed Database, OBIA, DAC and Informatica in windows 7 64 bit. Installation is successful.
To create data warehouse tables through DAC, we need merant driver. But Merant driver is not available in windows 64bit.
I followed the below procedue to create a merant driver.
"C:\Windows\SysWOW64\odbcad32.exe"
Executed odbcad32.exe, and I found the merant driver in the list, when i try to create DSN, I am getting the following error.
Specified Driver could not be loaded due to system error 193: (Oracle Merant Driver in DAC 10g_Oracle-OH1635326477, c:\orahome\10gR3_1\bifoundation\dac\utilities\DataDirectODBC\seor820.dll).
Can any one please provide me the solution.
Regards,
KumarI know the docs say you must use the merant driver however did you try a normal oracle odbc connnection. I am sure i did this in the past.
BTW I hope this is just your laptop and you are playing around. I do'nt think Windows 7 is a supported environment. You should consider a supported platform for production and maybe a virtual machine on your windows 7 machine in development so you can practice the install.
See
Oracle Fusion Middleware Supported System Configurations
http://www.oracle.com/technetwork/middleware/ias/downloads/fusion-certification-100350.html
System Requirements and Supported Platforms for Oracle Business Intelligence Applications 7.9.6.3 http://www.oracle.com/technetwork/middleware/bi/obia7963cert-matrix-395521.xls -
HP G62 -Windows 10 "this version of Windows not available for Windows 10 app"
I'm trying to schedule the Windows 10 upgrade and receive the message "this version of Windows not available for Windows 10 app". I have Win7 SP3, enough memory, everything else it says it requires. the only thing I can't verify is the graphics driver. What might the problem be?
I am using a HP G62a50sg ( APU ATI HD4250 Mobility and ATI HD 5470 Mobility ) . The Windows 10 Update showed that there were no compatabilty problems and I did the upgrade. Everything works fine only the graphics are the problem. I have installed Windows 10 64 bit (Clean) around 5 times and tried all the drivers starting from Windows 7 , Windows 8 ,orginal Notbook drivers von HP and also from AMD ( CC 15.7 Mobility) . Nothing seems to work. Windows 10 reconizes the graphics but doesn`t support the switchable graphic funktion. I think it is an issue with the APU HD4250 Mobility and the Chipset. The desktop has only the 1024 X 768 option and in the graphics manager ( desktop) shows the Graphics as Basic Microsoft Display Driver. I am still trying but I am running out of ideas.
-
Why skype is not available for windows phone 7.8 e...
Hi Team,
Why skype is not available for windows phone 7.8, earlier it was there in wp 7.8 market place... Please bring it back for WP 7.8Yet more shoddy treatment of those who bought in to win phone 7. Makes me feel foolish for recommending windows phone to friends and colleagues. "We want everyone to experience the best Skype has to offer" and your way of doing this is to take it away!
My next phone is unlikely to be a win phone 8, and I'll look at alternatives to skype. -
Windows Authentication option not available in Windows 8.1
Hi,
I am using Windows 8.1 OS. "Windows Authentication" option is not available in my laptop. I navigated to below path.
Windows Features --> Internet Information Services --> World wide web services --> Security --> in this I am not able to see windows authentication. Please let me know.
Thanks in Advance!
Krishna.Hi Meipo,
Thank you for the information and reply.
I ran command in my laptop. I got below error.
Image version : 6.3.9600.17031
Error: 0x800f080c
Feature name IIS-WindowsAuthentication is unknown.
Is this problem with OS version? Please suggest me how can I get windows authentication in my laptop.
Thanks in Advance!
Krishna. -
DBCA error ORA-01034 oracle not available on Windows server 2008 r2 64
Hi All,
I have installed oracle 11.2.0.1 on my system having OS Windows server 2008. Then after that through DBCA i was creating the database during that i got ORA-01034 oracle not available. if any body know how to resolve it please reply me.
Thanks & Regards,
AryaDid you got the error in between when DBCA executed some percentage of work? PLease check its logfiles to get the exact error.
-
During installation from DVD of Adobe Photoshop Lightroom 4 the program is searching for msvr100.dll which is not available in my Windows 7 files. What to do?
This provides those files Error "Unable to start correctly - 0Xc00007b"
-
Drivers Not available for windows 7 64 bits
HP Pavilion G6-2302ax Drivers not available
1. Graphics
PCI\VEN_1002&DEV_6840&SUBSYS_184A103C&REV_00
PCI\VEN_1002&DEV_6840&SUBSYS_184A103C
PCI\VEN_1002&DEV_6840&CC_030000
PCI\VEN_1002&DEV_6840&CC_0300
2. Bluetooth Controller
PCI\VEN_1814&DEV_3298&SUBSYS_18EC103C&REV_00
PCI\VEN_1814&DEV_3298&SUBSYS_18EC103C
PCI\VEN_1814&DEV_3298&CC_0D1100
PCI\VEN_1814&DEV_3298&CC_0D11
3. Ethernet Controller
PCI\VEN_10EC&DEV_8136&SUBSYS_184AEC103C&REV_05
PCI\VEN_10EC&DEV_8136&SUBSYS_184AEC103C
PCI\VEN_10EC&DEV_8136&CC_020000
PCI\VEN_10EC&DEV_8136&CC_0200
4. Network Controller
PCI\VEN_1814&DEV_3290&SUBSYS_18EC103C&REV_00
PCI\VEN_1814&DEV_3290&SUBSYS_18EC103C
PCI\VEN_1814&DEV_3290&CC_028000
PCI\VEN_1814&DEV_3290&CC_0280
5. SM Bus Controller
PCI\VEN_1022&DEV_780B&SUBSYS_184A103C&REV_14
PCI\VEN_1022&DEV_780B&SUBSYS_184A103C
PCI\VEN_1022&DEV_780B&CC_0C0500
PCI\VEN_1022&DEV_780B&CC_0C05
6. UNIVERSAL Serial Bus (USB) Controller
PCI\VEN_1022&DEV_7812&SUBSYS_184A103C&REV_03
PCI\VEN_1022&DEV_7812&SUBSYS_184A103C
PCI\VEN_1022&DEV_7812&CC_0C0330
PCI\VEN_1022&DEV_7812&CC_0C03
7.
UNIVERSAL Serial Bus (USB) Controller
PCI\VEN_1022&DEV_7812&SUBSYS_184A103C&REV_03
PCI\VEN_1022&DEV_7812&SUBSYS_184A103C
PCI\VEN_1022&DEV_7812&CC_0C0330
PCI\VEN_1022&DEV_7812&CC_0C03
Need to install these drivers for windows 7 64 bit
This question was solved.
View Solution.Hi:
First download and install the amd chipset drivers and reboot.
http://support.amd.com/en-us/download/chipset?os=Windows%207%20-%2064
Graphics:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103954-1&cc=us&dlc=en&lc=en...
Audio:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103764-1&cc=us&dlc=en&lc=en...
Bluetooth Controller:
http://h20565.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5229463&swItemId=ob_113004_1&swEnvOid=405...
Network Controller:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-111781-1&cc=us&dlc=en&lc=en...
Ethernet Controller:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103913-1&cc=us&dlc=en&lc=en... -
Flash lite 3.1 not available for windows device?
Hi! Can anybody help me here?
I've been developing stand alone flash apps for windows mobiles with flash lite 2.1 with no problems!
The company I'm developing for has switched to Vodafone V1520's (Asus p550) running windows mobile 6 Professional.
I've ran flash lite 2.1 with no problems on the device. I've decided to upgrade to 3.1 as it's a fresh install for all 2000 units.
My problem is, When I install the app using Adobe mobile packager, the device comes back with the error " Adobe flash lite is not available for this device"!! I know flash lite 2.1 works.
Is there a way to manually install 3.1 on the device?You can download the player at the following URL:
http://labs.adobe.com/downloads/distributableplayer.html
Please be aware that you need to use the Mobile Packager to use this version of the runtime for applications. It's also worth pointing out that your device should be compatible, we do not recommend installing it on unsupported devices.
We have a new version of the packager 1.1 here:
http://www.flashmobileblog.com/2009/06/11/adobe-mobile-packager-1-1/
Regards,
Mark
www.flashmobileblog.com -
Patch 4329444 still not available for windows??
Hello,
I've done a fresh install of GC 10gR2 on windows. I planned to upgrade it to 10gR3 today but the patch 4329444 that the documentation says to install is not available on metalink? It's available for Linux only..the doco says it should be available in Feb 2007.
So is anyone running R3 on windows? if so, did you just bypass the patch?
Thanks.Got a response from Oracle...
Support said to do the upgrade on the database to 10.2 and then follow the other steps. The weird thing is if you check the Grid Control Checker, it says 10.1.0.4+ is supported for 10gR3 OMS...which makes me wonder why do i have to bother with the upgrade.
If anyone is running GC 10gR3 on windows, i would like to know what they did..
Thanks. -
Reader XI not available for Windows Vista. Why?
I have just tried to install Reader XI, but I keep being directed to Reader X. Looking at the Technical Specs. Windows Vista is not listed. An over sight? What is going on?
I have Reader XI on my Win 7 office computer. I have Vista on my home computer and tried different links to get to the Reader XI download page, but I too kept getting redirected to the X download page.
When I found the "previous versions" page http://get.adobe.com/reader/otherversions/ I tried inputing different OSs (XP, Vista and 7) and discovered XI is not available for Vista. Obviously the auto-redirect is due to Adobe.com detecting my OS.
I'm not overly concerned. I mean, ver X works fine for what I need it for at home. The only reason I came here (to the forum) was to find out 'why'. -
Quicktime export not available for Windows 8?
Hello,
I have imported .mov footage from my Canon 60D into a Premiere project and edited it on the timeline. It plays fine in Premiere. I would like to export it in the same format. I go File -> Export -> Media and in the format dropdown "Quicktime" or "MOV" are not available.
I tried installing Quicktime from the Apple site, it didn't affect the export setting in Premiere. The version of Quicktime I installed was an x86 for Windows 7 version, I could not find a 64bit or Windows 8 version.
I am on Windows 8 64 bit with CS6 Master Collection.
Does anyone know how I get Quicktime into my export format options?You're honestly better off not using QT.
What is the basis and foundation of this comment ?
(apart from personal bias of course)
We have never had any issues in using QT in a cross platform, cross facilty workflow.
My peers and colleagues agree.
Thing is Jim..if one works within a cross platform, cross facilty workflow...one often runs into QT. eg Uncompressed .mov (8, 10, 16 bit) required. Not AVI or H264!.
They wont change setups based on Jim Simons humble opinion on all things Apple. -
Hyper-V not installing on Windows 8.1
Hi
I can't activate the Hyper-V feature of Windows 8.1. Whenever I enable the feature all goes well, I reboot when prompted. But after the reboot Hyper-V is not installed - it's shown as not installed in "Turn Windows feature on and off".
The Windows Setup log has an information event (ID 11) "Update Microsoft-Hyper-V of package Microsoft-Hyper-V-ClientEdition-Package failed to be turned on. Status: 0x800f0922."
I tried DISM.exe /Online /Cleanup-Image /RestoreHealth, but that made difference.
I also tried activating the feature through DISM, but no joy.
Finally, I tried changing my SSD to a spare I had, and doing a fresh Windows 8.1 install on the new SSD, but Hyper-V still doesn't install.
I have a i7 CPU, and virtualization is enabled in the BIOS.
RoyOutput from Coreinfo -v:
Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz
Intel64 Family 6 Model 60 Stepping 3, GenuineIntel
Microcode signature: 0000001A
HTT *
Hyperthreading enabled
HYPERVISOR -
Hypervisor is present
VMX *
Supports Intel hardware-assisted virtualization
SVM -
Supports AMD hardware-assisted virtualization
X64 *
Supports 64-bit mode
SMX -
Supports Intel trusted execution
SKINIT -
Supports AMD SKINIT
NX *
Supports no-execute page protection
SMEP *
Supports Supervisor Mode Execution Prevention
SMAP -
Supports Supervisor Mode Access Prevention
PAGE1GB *
Supports 1 GB large pages
PAE *
Supports > 32-bit physical addresses
PAT *
Supports Page Attribute Table
PSE *
Supports 4 MB pages
PSE36 *
Supports > 32-bit address 4 MB pages
PGE *
Supports global bit in page tables
SS *
Supports bus snooping for cache operations
VME *
Supports Virtual-8086 mode
RDWRFSGSBASE *
Supports direct GS/FS base access
FPU *
Implements i387 floating point instructions
MMX *
Supports MMX instruction set
MMXEXT -
Implements AMD MMX extensions
3DNOW -
Supports 3DNow! instructions
3DNOWEXT -
Supports 3DNow! extension instructions
SSE *
Supports Streaming SIMD Extensions
SSE2 *
Supports Streaming SIMD Extensions 2
SSE3 *
Supports Streaming SIMD Extensions 3
SSSE3 *
Supports Supplemental SIMD Extensions 3
SSE4a -
Supports Streaming SIMDR Extensions 4a
SSE4.1 *
Supports Streaming SIMD Extensions 4.1
SSE4.2 *
Supports Streaming SIMD Extensions 4.2
AES *
Supports AES extensions
AVX *
Supports AVX intruction extensions
FMA *
Supports FMA extensions using YMM state
MSR *
Implements RDMSR/WRMSR instructions
MTRR *
Supports Memory Type Range Registers
XSAVE *
Supports XSAVE/XRSTOR instructions
OSXSAVE *
Supports XSETBV/XGETBV instructions
RDRAND *
Supports RDRAND instruction
RDSEED -
Supports RDSEED instruction
CMOV *
Supports CMOVcc instruction
CLFSH *
Supports CLFLUSH instruction
CX8 *
Supports compare and exchange 8-byte instructions
CX16 *
Supports CMPXCHG16B instruction
BMI1 *
Supports bit manipulation extensions 1
BMI2 *
Supports bit manipulation extensions 2
ADX -
Supports ADCX/ADOX instructions
DCA -
Supports prefetch from memory-mapped device
F16C *
Supports half-precision instruction
FXSR *
Supports FXSAVE/FXSTOR instructions
FFXSR -
Supports optimized FXSAVE/FSRSTOR instruction
MONITOR *
Supports MONITOR and MWAIT instructions
MOVBE *
Supports MOVBE instruction
ERMSB *
Supports Enhanced REP MOVSB/STOSB
PCLMULDQ *
Supports PCLMULDQ instruction
POPCNT *
Supports POPCNT instruction
LZCNT *
Supports LZCNT instruction
SEP *
Supports fast system call instructions
LAHF-SAHF *
Supports LAHF/SAHF instructions in 64-bit mode
HLE *
Supports Hardware Lock Elision instructions
RTM *
Supports Restricted Transactional Memory instructions
DE *
Supports I/O breakpoints including CR4.DE
DTES64 *
Can write history of 64-bit branch addresses
DS *
Implements memory-resident debug buffer
DS-CPL *
Supports Debug Store feature with CPL
PCID *
Supports PCIDs and settable CR4.PCIDE
INVPCID *
Supports INVPCID instruction
PDCM *
Supports Performance Capabilities MSR
RDTSCP *
Supports RDTSCP instruction
TSC *
Supports RDTSC instruction
TSC-DEADLINE *
Local APIC supports one-shot deadline timer
TSC-INVARIANT *
TSC runs at constant rate
xTPR *
Supports disabling task priority messages
EIST *
Supports Enhanced Intel Speedstep
ACPI *
Implements MSR for power management
TM *
Implements thermal monitor circuitry
TM2 *
Implements Thermal Monitor 2 control
APIC *
Implements software-accessible local APIC
x2APIC *
Supports x2APIC
CNXT-ID -
L1 data cache mode adaptive or BIOS
MCE *
Supports Machine Check, INT18 and CR4.MCE
MCA *
Implements Machine Check Architecture
PBE *
Supports use of FERR#/PBE# pin
PSN -
Implements 96-bit processor serial number
PREFETCHW *
Supports PREFETCHW instruction
Maximum implemented CPUID leaves: 0000000D (Basic), 80000008 (Extended).
Logical to Physical Processor Map:
**------ Physical Processor 0 (Hyperthreaded)
--**---- Physical Processor 1 (Hyperthreaded)
----**-- Physical Processor 2 (Hyperthreaded)
------** Physical Processor 3 (Hyperthreaded)
Logical Processor to Socket Map:
******** Socket 0
Logical Processor to NUMA Node Map:
******** NUMA Node 0
No NUMA nodes.
Logical Processor to Cache Map:
**------ Data Cache 0, Level 1, 32 KB, Assoc 8, LineSize 64
**------ Instruction Cache 0, Level 1, 32 KB, Assoc 8, LineSize 64
**------ Unified Cache 0, Level 2, 256 KB, Assoc 8, LineSize 64
******** Unified Cache 1, Level 3, 8 MB, Assoc 16, LineSize 64
--**---- Data Cache 1, Level 1, 32 KB, Assoc 8, LineSize 64
--**---- Instruction Cache 1, Level 1, 32 KB, Assoc 8, LineSize 64
--**---- Unified Cache 2, Level 2, 256 KB, Assoc 8, LineSize 64
----**-- Data Cache 2, Level 1, 32 KB, Assoc 8, LineSize 64
----**-- Instruction Cache 2, Level 1, 32 KB, Assoc 8, LineSize 64
----**-- Unified Cache 3, Level 2, 256 KB, Assoc 8, LineSize 64
------** Data Cache 3, Level 1, 32 KB, Assoc 8, LineSize 64
------** Instruction Cache 3, Level 1, 32 KB, Assoc 8, LineSize 64
------** Unified Cache 4, Level 2, 256 KB, Assoc 8, LineSize 64
Logical Processor to Group Map:
******** Group 0 -
Are there any amazing features for people with disabilities not available in Windows?
I do volunteer work at a group in Tokyo which provides English conversation and light computer lessons for people with various kinds of disabilities on Sundays at a community center.
They want me to come in on Sundays for a few months and teach people - such as their other teachers - how to use Apple computers. And they bought all the teachers, including me, new MacBook Airs or MacBook Pros.
The thing is, these people are basically all Windows users, and they seem, somehow, to use their Windows machines just fine with varying disabilities. In particular, some portion of the group are blind. There is a Mac enthusiast who has gotten it into his mind that he wants more of his fellow members using Macs, rather than Windows, so he is behind this new project.
I know there are "accessibility features" for the Mac, though I've not really made use of them myself except for some light testing so far to see that they work.
My question is "why Mac?" I am a Mac user myself, and I enjoy using a Mac. But I think it is probably a matter of what you are used to. If these people are happy using their Windows machines I don't know of anything I can say to make them want to switch. So I'm not sure how practical or productive the entire plan is, though I'm happy to try to help out, and I enjoy working with the group.
I can certainly teach these people, who are not familiar with Macs, how to use them. I've been using Macs for years and years.
But is there anything I can say about why Mac features for people with disabilities are better than Windows features? Any examples anybody can point me to?
Like I said, I'm happy to go over there on Sundays and help out and bring my new MacBook Pro over and hook it up to the projector and point out interesting things you can do on the Mac and answer questions.
But the big question that I can't answer is, "Are there benefits to using a Mac over Windows for people with disabilities?" If anybody knows of any, please let me know! I don't want the person promoting this project to feel it was a waste at all. I think basically he feels left out being basically the only Mac user there and wants to generate more of a circle of supportive people around him who are Mac users since he himself is losing his sight. So if there are factual, practical reasons for "Why Mac for people with disabilities" I would like to explain them.
Thanks,
DougHi Doug
It sounds like you are doing a good job with your technology students. I've been an Apple Mac user for well over 30 years and occasionally had to use Windows when using MS Access. To my mind, the Mac is much easier to use from the "Starting Grid" than Windows. And having worked in a University with both platforms, the cult is fairly evenly balanced. However, the current generations of Apple Tablets are infinately easier to understand than OSX or Win7/8. I think there is an old saying here which has many merits "If it ain't broke" don't try and fix it". If your students are learning to understand Windows and are coping with it, the confusion of teaching them Mac, might actually give yourself a potential nightmare scenario. Certainly Microsoft with Windows 8, is trying to bring the latest operating system into the 21st Century, and whilst it wouldn't suit me, why create a dilemma for yourself when they seem to be happy with what they've got.
In terms of your final paragraph, and reaching for the proverbial glass ball, I can see a future of tablets gaining even more popularity, and with the likes of Siri, which is in part available now on the iPhone. Surely this is the path of the future where one can talk to the device and gain an immediate response. Even Steve Wozniak hinted at this in a television interview on BBC's Click television programme. I'm sorry there's no definitive answer to your question, but hats off to Gene Roddenberry whose imagination has given inspiration to the makers of our devices that has created a communications world and is infinately getting closer to the audience you are trying to reach out to. -
Troublesho​oting not available in Windows 8.1 Advanced Startup menu
I am trying to install an unsigned driver on my Windows 8.1 Yoga 2 Pro laptop; I gather that to do so I need to disable Driver Signature Verification on the via the Advanced Startup menu.
The problem is that the Advanced Startup menu I see does not offer "Troubleshoot" as an option. I see only three choices: Continue, Use a device, and Turn off PC. I have two questions:
1) Does anyone know how I can restore the Troubleshoot option in the Advanced Startup menu?
2) Is there another way to disable Driver Signature Verification?
(It may be relevant that the laptop came with Windows 8 installed; since purchasing the laptop I migrated from a 128GB ssd to a 480GB ssd using Macrium Reflect.)
Thanks for your help!Hi,
About the issue, I suggest that you can post it in windows forum where you can get better answers.
http://answers.microsoft.com/en-us/windows/forum/windows8_1?sort=lastreplydate&dir=desc&tab=Threads&status=&mod=&modAge=&advFil=&postedAfter=&postedBefore=&threadType=All&tm=1427372356517
Hope it can help you.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Maybe you are looking for
-
Pre won't let me put in an ip address for a mail server name when adding a new account.
I can type it in, but it won't let me that add the accunt (sign in button doesn't work). If i put a name in there, it lets me click "sign in". is this a known issue? any workaround for this? we don't have a qualifed name so i need to use the ip ad
-
Hi all I have control blk and a detail block in detail block i have delevery dates i want when i press the button those del_date were expired it will show my buutton is in control block My code is declare b_where varchar2(4000); begin if :date =
-
Desktop link keeps disappearing from Favorites pane
On my 10.9.4 MacBook Air, all of a sudden I have the following weird problem. The "Desktop" link is missing from the left panel of Favorites on any Finder window. I drag it there, and next window I open - it's gone again! What is going on?!?
-
Phatfusion's Image Menu, how to get it to work?
I have found several code changes on the internet, which are all different, but still cannot get it to work. Can anyone please give a thorough description, step by step, on what changes to make and where to make them? I get the part where you have to
-
Incomplete Import & Preview Generation
Using Import, if the importation process is not completed by virtue of files already in catalog, incompatible PSD or too large - the process halts instead of moving on to generate the Previews proscribed in the Import dialog. This wastes the opportun