Hyper V not starting up after installation

I have installed Windows 8.1 PRO.......after installing Hyper V this attached error is showing up every time when i'm trying to configure Hyper V. My rig is CPU: Core 2 Duo E7400 2.8Ghz ,RAM 4 GB 1TB HDD,Intel G43 Chipset.
Im in a mess.........
Plz HELP!!!!!!!!
ITS URGENT..........

You have to launch it elevated.
You must be logged in as the local user account 'administrator' to not require that.
And, you must be an administrator on the box.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.
Disclaimer: Attempting change is of your own free will.

Similar Messages

Not starting up after installation of Security Update 2008-002

Hi there,
After successfully downloading and installing the Sec. Upd 2008-002 and proceeding to a 'restart' as required, my mac no longer starts up. I get the chime but the 'wheel'keeps spinning without further action.
Any help on this ?
Thanks
Eric

ericdekelver wrote:
Hi there,
After successfully downloading and installing the Sec. Upd 2008-002 and proceeding to a 'restart' as required, my mac no longer starts up. I get the chime but the 'wheel'keeps spinning without further action.
Any help on this ?
Thanks
Eric
Welcome to the Apple boards:
Can you boot into the Safe mode? Hold down the shift key when booting.
If so, do not login but at the login screen, click restart. You may have to use the backarrow to get to the restart button.
Let the machine reboot normally.
Usually this will fix a stuck update, but there are no guarantees.
Message was edited by: nerowolfe

Firefox does not start up after an automatic update. Every time i try to open it, it just prompts the Mozilla Crash Reporter.

Firefox does not start up after an automatic update. Every time i try to open it, it just prompts the Mozilla Crash Reporter.
''Add-ons: {972ce4c6-7e08-4474-a285-3208198ce6fd}:3.6.10
BuildID: 20100914125854
CrashTime: 1290192405
EMCheckCompatibility: true
FramePoisonBase: 00000000f0de0000
FramePoisonSize: 65536
InstallTime: 1287124738
ProductName: Firefox
ReleaseChannel: release
SecondsSinceLastCrash: 422
StartupTime: 1290192405
Theme: classic/1.0
Throttleable: 1
Vendor: Mozilla
Version: 3.6.10
This report also contains technical information about the state of the application when it crashed.''
Same thing happens when i click restart.
No difference when i run it in Safe mode. And it won't let me create a new profile either. Is there anyway else i can extract my bookmarks? This is driving me crazy!

Did the crash reporter send any crash reports? 
You can see the crash reports in this folder:
"C:\Users\<user>\AppData\Roaming\Mozilla\Firefox\Crash Reports"
See: http://kb.mozillazine.org/Breakpad
See also [[Firefox crashes when you open it]]
Create a new profile as a test to check if your current profile is causing the problems. 
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]] 
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" 
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files) 
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox 
If that still causes the same problem then do a clean reinstall and remove the Firefox program folder.
* Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data when uninstalling.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
See:
* http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Windows xp will not boot up after installation of desktop software 4.3.

windows xp will not boot up after installation of desktop software 4.3. Where do I start to get my p.c. going again ???

I get the message that a recent hardware or software change might have caused this.
The computer does not boot up in safe mode or last known good configuration.
I'm glad you think the software has nothing to do with it, but perhaps you can also explain why this problem started as soon as I downloaded the desktop software and tried to restart the computer.

2007 Mac Book pro Shuts down at startup attempt. Tried reloading OSX and will not start up after that.

My Mac Book Pro started having issues. I tried to relaod the operating system and it worked for a moment. When I tried to do a time machine back up it failed.
Now itr Shuts down at startup attempt. Tried reloading OSX and will not start up after that.

Dr.Conga,
did you try to do a Time Machine backup from your MacBook Pro, or a Time Machine restoration to it?
Are you trying to reload your current version of OS X (10.7.4, to judge from your signature), or are you trying to reload the version of Mac OS X that came on the grey installation DVDs that originally came with your MacBook Pro?

TS2570 Mac will not start up after software up date, just screen with Apple logo and spinning icon?

Mac will not start up after software up date, just screen with Apple logo and spinning icon? I have tried safe start up, unplugged all other cables, no luck?

How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

After downloading mountain lion the internet does not start automatically after start or restart but if I use diagnostics it starts is there a simpler solution

After downloading mountain lion the internet does not start automatically after start or restart but if I use diagnostics it starts is there a simpler solution?

Extensions can sometimes be the cause of problems. If the problem does not occur in Safe Mode, then you can disable your extensions one-by-one until you find out which one is causing the problem. See [[Troubleshooting extensions and themes]]

Logic pro not starting up after install.

Ive tried to install Logic pro twice and both time it will not start up after install. can someone tell me what is the best way to install this program correctly? should i just pay apple more money to install the program for me?

I have exactly the same problem. Whilst 8.0.1 would hang during startup without displaying the splash screen intermittently 8.0.2 crashs every time a few seconds after displaying the splash screen.
Although my computer is almost 6 years old it is perfectly adequate for audio work. I hope this is fixed soon. Unimpressed with the quality control.

Dispacher and server0 is not started during NW2004s installation

Hi,
Dispacher and server0 is not started during NW2004s installation. SAPInst is stopped on the step of the 'Start java instance'. SDM is 'running' but dispacher and server0 is 'Starting framwork'. So I configured the some parameters via configtool but I can't solve this probelm. I found the some error logs as the followings.
(22503) Starting local Command:
Command: en.sapMPP_SCS33 pf=/usr/sap/MPP/SYS/profile/MPP_SCS33_spdeai01
listen failed on port/service sapdp33
initialize_global: another instance of the enque server seems to be running. EXIT
***LOG Q01=> MsSInit, MSStart (Msg Server 1 22502) [msxxserv_mt. 1818]
[Thr 1] SigISetDefaultAction : default handling for signal 18
[Thr 1] load acl file = /usr/sap/MPP/SYS/global/ms_acl_info
[Thr 1] MsGetOwnIpAddr: my host addresses are :
[Thr 1] 1 : [10.223.50.15] spdeai01 (HOSTNAME)
[Thr 1] 2 : [127.0.0.1] localhost (LOCALHOST)
[Thr 1] 3 : [10.223.50.215] 10.223.50.215 (NILIST)
[Thr 1] 4 : [10.223.50.115] 10.223.50.115 (NILIST)
[Thr 1] MsHttpInit: full qualified hostname = spdeai01
[Thr 1] HTTP logging is switch off
[Thr 1] set HTTP state to LISTEN
[Thr 1] ms/icf_info_server : deleted
[Thr 1] *** I listen to internal port 3933 (3933) ***
[Thr 1] *** HTTP port 8133 state LISTEN ***
[Thr 1] CUSTOMER KEY: >Q0820898445<
[Thr 1] Wed Oct 24 18:28:11 2007
[Thr 1] MsJ2EE_AddLoggedInNode: add node [305110500] into logged in list
[Thr 1] Wed Oct 24 18:28:21 2007
[Thr 1] MsJ2EE_AddLoggedInNode: add node [305110550] into logged in list
Our JDK version is '1.4.2_11' and We are installing on the HA environment.
How can I solve this problem? or What should I check about it?
Best Regards,
David.

Check if the Database serivice is up and running. If this is not so.. you might have to start all over again..!!
VJ

My MacBook Pro will not start up after entering correct password.

My MacBook Pro will not start up after entering password. Circle with an X in it and 'cancel' below it is on bottom of screen. When clicking on cancel, nothing happens. This just started last night.

Hi MJTOOTS,
Since you are getting to the login screen, it is booting past the "gray screen" phase, so try the steps in this article, like a Safe Boot.
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
http://support.apple.com/kb/ts1417
You may also want to see if any of your Login Items are causing an issue.
OS X Mavericks: Open items automatically when you log in
http://support.apple.com/kb/PH14173
Thank you for visiting Apple Support Communities.
Nubz

New Macbook Pro does not start up after updating...HELP!!!

Hi,
My new Macbook Pro does not start up after it got updated. The first time I used it, it was perfect. I updated it and restarted it when it told me to but it doesn't boot. It shows an apple and a spinning circle when it turns on but that's it.
Can somebody please help me?

You should probably post your question in the MacBook Pro discussions:
http://discussions.apple.com/category.jspa?categoryID=190

IPhoto does not start up after upgrading

On my new iMac iPhoto does not start up after migrating. Upgrade from iPhoto 6/Snow Leopard > Lion 10.7.1 with iPhoto 9.1.5. When the conversion is finished I can see the new library, it works allright. And with packet-inspection (or how is that called in English) all maps & data seems to be OK; I can check the seperate pics.
But: iPhoto won't start up a second time (grey screen with infinite spinning wait cursor). The same thing is happening when I add a new library and drop in some pictures.
What can cause this problem?

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

R12-oafm, forms and oacore not starting up after IP adress change

Heloo my friend;
I had problem while i changed my server IP...when i start adstrtall.sh script its end wiht :
adstrtal.sh: Exiting with status 3 and adoafmctl.sh: exiting with status 204 ...soo my login page doesnt come to explorer and it gives HTTP 404 page not found error
So here is the solution:
Cause
The OC4J lock files contains the IP adress, after the ip adress change the lock files includes the wrong Ip adress which caused the OJ4J to fail
Solution
1 - open a new shell and set your apps environment
2 - cd $ADMIN_SCRIPTS_HOME
3 - adopmnctl.sh stop
4 - check if it is really down: ps -ef grep grep opm
5 - delete the following:
rm -fr $INST_TOP/ora/10.1.3/j2ee/oacore/persistence/*
rm -fr $INST_TOP/ora/10.1.3/j2ee/oafm/persistence/*
rm -fr $INST_TOP/ora/10.1.3/j2ee/forms/persistence/*
6 - adopmnctl.sh start
7 - check if the issue has been resolved: adapcctl.sh status
I hope its helpful
Helios

Helios,
Thanks for sharing this, but please note that sharing the contents of Metalink notes is illegal. Instead, point to the Note ID or give a hint.
Note: 412980.1 - oafm,forms and oacore not starting up after IP adress change
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=412980.1

My MBP will not start up after restart

My MBP (late 2011 running 10.8.something - receintly updated) will not start up after I had to do a restart to install Blackberry Desktop software (for my wife, I promise). It chimes, gets past the grey screen with the Apple logo and then just sits on the login screen but with the background only, no account or anything. My mouse pointer is there and moves but nothing else. Anyone have any idea?

Reboot holding the Shift key down on a wired or built in keyboard, this is Safe Mode and will disable the at boot kernel extension file that Blackberry installed.
When you get in uninstall the software using their uninstaller. Then reboot normally again, visit their website for a update if there is one.
Blackberry/RIM software has been causing issues around here lately.
If your machine refuses to boot normally again, then run through this list 1-8,, by #8 your machine should be booting normally again.
Step by Step to fix your Mac

Satellite A300-15A does not start up after Alcohol program installation

Hi...
I bought Satellite A300-15A yesterday and after completing the Vista installation process, I tried to install "Alcohol" but my notebook shutdown and now I'm not able to start notebook.
It is not starting in any mode.
I forget to make recovery discs. I think Alcohol is not compatible with Vista. Error which i receive is below.
Can anyone tell me the solution?
Please help urgently
"A problem has been detected and Windows has been shut down to prevent damage to your computer.
If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps: blah blah... "

Sounds like a familiar problem to me, as I had the same one with the Daemon tools. After installing those tools I couldn't start my Windows XP any more. I guess it somehow mixed up some drivers or registry entries, but not sure about that.
Ok, you can try to deinstall the tool by first starting Vista in safe mode (press F8 before Windows boot up).
You should be then able to enter Vista without problem.

Hyper V not starting up after installation

Similar Messages

Maybe you are looking for