Hyper-V port ACLs not accepted from VMM

I am trying to centrally manage all my port ACLs for VM net adapters from VMM but I am not able to run the command.
I try to run the command from"Add-VMNetworkAdapterExtendedAcl"SCVMM
PowerShell terminal:
PS C:\Users\Administrator> Add-VMNetworkAdapterExtendedAcl -VMName "Web-VM1" -Action "allow" -Direction "Outbound"
80 "TCP" -Weight 1 -Stateful $true
And get the following:
Add-VMNetworkAdapterExtendedAcl : The cmdlet cannot find a specified class. Verify that the relevant feature is
enabled on the operating system.
At line:1 char:1
+ Add-VMNetworkAdapterExtendedAcl -VMName "Web-VM1" -Action "allow" -Directio ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Add-VMNetworkAdapterExtendedAcl], VirtualizationOperationFailedExcept
ion
+ FullyQualifiedErrorId : Microsoft.HyperV.PowerShell.Commands.AddVMNetworkAdapterExtendedAclCommand
Any ideas?
SamG

Hi SamG,
Agree with the others .
Also you can use powershell "Enable-PSRemoting -force" on destination hyper-v server (The system will prompt you to confirm some settings during
the setup. Select A for Yes to All to confirm all of them.).
Then on your local computer run the follow powershell :
$cred = Get-Credential -Credential xxxxxx\administrator
(you need to enter the user name and password of the remote computer)
Enter-PSSession -ComputerName xxxxxx -Credential $cred
After that , maybe you can remote use powershell .
For details please refer to following links:
http://blogs.technet.com/b/heyscriptingguy/archive/2011/11/17/learn-how-to-manage-remote-powershell-sessions.aspx
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Vnc, ssh ports intermittently not accepting connections since upgrading to 10.10.1

Since upgrading I cannot remote access my mac book air 2014. Prior to the upgrade I did not have any issues. I have not changed any networking / firewall settings.
Sometimes it works, other times the vnc and ssh ports do not accept connections.
Running nmap on another host on the local LAN reports all ports as being filtered.
Other times, nmap shows 22, 5900, and the AFP port open, as expected.
I know there have been reports of wi-fi issues, and this machine is using wi-fi.
Is it possible that when the screen blanks after a period of the machine not being used, that the wi-fi connection is going into a power down mode?
I don't see the ports being filtered when I am using the machine, it's only after I've left the house and I try to remotely connect.

On looking at the secure.log on the iMac with OSX10.6.8, I see these entries at each attempt to scp into the iMac:
Dec 29 11:06:20 molika sshd[7248]: in pam_sm_authenticate(): Failed to determine Kerberos principal name.
Dec 29 11:06:26 molika sshd[7246]: Accepted keyboard-interactive/pam for prowat from 137.110.243.132 port 35571 ssh2
Dec 29 11:06:26 molika com.apple.SecurityServer[26]: Session 0x236a14 created
Dec 29 11:06:26 molika com.apple.SecurityServer[26]: Session 0x236a14 attributes 0x20
Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Session 0x236a14 dead
Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Killing auth hosts
Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Session 0x236a14 destroyed
I don't know what to make of this.
Peter R

Not acceptable from nokia!

Recently stated by nokia
As for X7/E6: they are getting updates (PR1.1 is already in the pipeline and distributed as we speak) - but as I've stated we are not doing a big activity on those and I'm therefore not tracking them. If you are interested in those, switch on the software update autocheck in your phone and let it tell you as soon as it becomes available.
Here we see AGAIN nokia customers been let down and tossed aside like an empty can.
We where told nealry two weeks ago that the update for anna is available in ireland/uk.
From what im reading and hearing on irish networks be it sim free or not, a handfull and i mean a handfull of people have been able to update.
Why show lack of support for ireland/uk and the US. And leaving another batch of customers(current X7/E6 users) lagging behind.
Nokia should be supporting ALL variants,ALL regions and ALL countries.at ALL times.
As it stands we are still seeing ANNA been released in dribs and drabs.almost half way into september.
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

vsigma wrote:
The point that Jimmy (and others I might add!) are trying to make is this:
Nokia has promised an update by a certain date a while back for Anna for everyone. They couldn't deliver. Users are now questioning why they, Nokia, promised something that they couldn't deliver, or *KNEW* that they couldn't deliver by that time frame, and simply *&^#&@%! bad PR moves by a company that which they love(d) products from.
@jraduga - you seem to be almost trying to do damage control FOR nokia's bad PR decisions on this forum based on the posts that you have thus far. Yeah - some people should chill out about this whole update. Heck, as a former Nokia loyalist - I would be freaking about it too. See, people wouldn't have cared or worried about this whole Anna business if Nokia didn't just randomly decided to tease folks about from Feb on. Heck, I am more than positive that most users would still be 99%+ content if they hadn't know about the whole Anna+Belle update is coming!
But the point is that Nokia promised and couldn't deliver. If they know they can't deliver - then stop teasing the user base and getting them annoyed. They're better off hammering it out throughly and then just releasing it quietly. It's not like they've sold *millions* of these particular batches of smartphones that *ALL* their servers would crash assuming that all of them attempted to update simultaneously. Nokia *KNOWS* that with their regional product code sets that how many devices are actually being used with every query from the device asking for an update from the previous smaller updates. They could easily do the math and determine what kind of server response they would need to have ready to dish out such an upgrade!
But then again, I'm speaking from a logical software/hardware management update schedule. Based on their previous trackrecord with other devices.. i'm not so sure it applies, and why Nokia wonders why their userbase is shrinking...
Ok so nokia is not perfect I've not commented either way on what has been said by them in regards to the promises made early in the year. Many companies that are releasing software or firmware based product fall behind. there is other phone manufacturers, one in particular
that are currently more than 9 months behind on their expected release date, but you know what i dont see people on their forums jumping up and down like those on here.
In regards to this point only, as far as I am concerned a general statement would be a better option for companies like these such as " we are currently working on a new release of ... and we believe it will benefit our customer base because of ..." something to keep interest in the company and the products without creating an unreal expectation of delivery timeframes.
I agree with you if you let it just slide thru the system then most people would be happy when they saw that they have an update, as opposed to waiting and expecting, which you will see that commented on in another post. The thing that gets me is that regardless of what was said as far as time frames, the release is happening, and yet people are still jumping up and down when it has been clearly explained that it being rolled out and that timeframes for each country or product code cannot be given until agreements are signed off and it is released. It been said over and over again, and yet they are still asking. Jimmy is concerned that his recently released x7/e6 is not getting some updates that he thinks he should be, so he is jumping up and down, when he 2 has been told only yesterday that roll outs are happening but that skyee is not tracking these herself as she is concentrating on the anna roll out. I truely dont care what promises were made or who teased who. we are not kids here. We are talking about roll out that are happening as we speak (or type lol), cant people show a little patience when they see things happening. cant people like jimmy whose phone has only just been release handle having to wait for a short time. What even gives him the impression that his phone even needs an update. This discussion is not about who said what 8 months ago or how long people have had to wait till it started to be rolled out.
Its about people demanding and constantly asking for things that they have already been told the answer to. I can understand frustration, i have used nokia products for more years than i care to remember and have been waiting for the release of the E7 in australia since it was first announced, even when it was available overseas for months before we got it here. All because the carriers had to agree with it and sign off on it after changes were made etc. when my old phone was dying more every day, when i could only be heard on it, if i used a bluetooth headset cause the mic wasnt working towards the end. but that little E90 hung on for me and even with all the faults that were going on with it, I was still able to use it and get all my details across to the E7. But did you see me on here complaining or whinging NO you didnt.
I can certainly undertand why the world has wars all the time. no body has any patience, as you would have seen in my other posts i'm from australia, we dont have the anna update and may not have it for a month. As you may or may not know Australia is about the 2nd largest market for smart phones in the world, and Nokia is still huge out here and yet we still dont have anna but how many of us do you see complaining, a couple here and a couple there. So what is it about the rest of the world that they all need to complain about it even when they have been given the answers they need.
They all defnietly need to chillout, if they cant and feel so strongly about it that they fill like they need to change their phone, then dont whinge about it, just do it. nokia will learn one way or another, if you all just leave then someone will have to ask questions. Soemtimes the loudest voices are the queitess ones. Cause when there is total silence people will start to listen. In the mean time read the posts, understand the posts and DONT keep asking the same questions over and over again when you have been told the answer!!!

Run port ACL command from SCVMM

I am trying to centrally manage all my port ACLs for VM net adapters from VMM but I am not able to run the command.
I
try to run the command from"Add-VMNetworkAdapterExtendedAcl"SCVMM
PowerShell terminal:
PS C:\Users\Administrator> Add-VMNetworkAdapterExtendedAcl -VMName "Web-VM1" -Action "allow" -Direction "Outbound"
80 "TCP" -Weight 1 -Stateful $true
And
get the following:
Add-VMNetworkAdapterExtendedAcl : The cmdlet cannot find a specified class. Verify that the relevant feature is
enabled on the operating system.
At line:1 char:1
+ Add-VMNetworkAdapterExtendedAcl -VMName "Web-VM1" -Action "allow" -Directio ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Add-VMNetworkAdapterExtendedAcl], VirtualizationOperationFailedExcept
ion
+ FullyQualifiedErrorId : Microsoft.HyperV.PowerShell.Commands.AddVMNetworkAdapterExtendedAclCommand
Any ideas? Is there a similar command for SCVMM?
SamG

You are running a Hyper-V cmlet, not an SCVMM cmdlet. Is the Hyper-V powershell module installed?
as far as I know, SCVMM does not support port ACLs at this time.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.
Disclaimer: Attempting change is of your own free will.

Mail gateway not accepting connections on port 25

My "beautiful" mail gateway does not accept Telnet connections to port 25.
Not from another machine
Not even from it self.
telnet gwipaddress 25
telnet: connect to address "gwIP": Connection refused
telnet: Unable to connect to remote host
Which variable in main.cf would be responsible for this?
Postfix is running.
All the machines involved are defined in mynetworks on the mailgateway as ipaddress/32
Or is this a deeper issue?
Any ideas?
Or is this a job for postconf -n?
TIA
Hans

I think I have found the cause.
inet_interfaces was set to "local" rather than "all"
I wonder why this causes such a problem...
Let me make a test and I'll be back in a while.
I found an old reply from some genious on the list
"I just spotted something else I missed before. (Well it's late here
edit /etc/postfix/main.cf and change:
inet_interfaces = localhost
to
inet_interfaces = all
and issue:
sudo postfix reload"
Look familiar?
Hans

HT204053 When I am purchasing from the app store for free apps my card is not being accepted. It's the same account I keep putting in the 3 digit security code. It still is not accepting it therefore cannot update my games.

Please can someone help me. I have been using my present account card for almost 2 years. Recently when purchasing free apps from store, I put in my password, then it takes me to my account to enter the security code for my card I do this and I have even re-entered the new card and it's still not accepting it.
Hence I cannot update or buy until I do this. The same thing happened with my daughters account and had to use her dads card.

Please can someone help me. I have been using my present account card for almost 2 years. Recently when purchasing free apps from store, I put in my password, then it takes me to my account to enter the security code for my card I do this and I have even re-entered the new card and it's still not accepting it.
Hence I cannot update or buy until I do this. The same thing happened with my daughters account and had to use her dads card.

TS1646 hello I have problem with regist my visa and I cannot buy from store the message came in the end of form is says the phone number must be a 7-digit number and I have writed but not accepted iam from saudi arabia my mobile is 966504850992 pls answe

hello
I have problem with regist my visa and I cannot buy from store
the message came in the end of form is says
the phone number must be a 7-digit number
and I have writed but not accepted
iam from saudi arabia
my mobile is 966504850992
pls answer
thanks
dfr aldossary

Wow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum. Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is. Apple is not here. It's users, like you.
If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off.

HT5622 I have a new desktop and re-installed my identity from my airtime back up and on the log in page my picture comes up with my usual password hint, but it is not accepting my password and I do not have the option to reset using my apple id - that par

I have a new desktop and re-installed my identity from my airtime back up and on the log in page my picture comes up with my usual password hint, but it is not accepting my password and I do not have the option to reset using my apple id - that particular function is in grey and cannot be clicked on

Depending on what kind of computer you have, you're gonna need to put that backup in the appropriate folder or itunes is not gonna be able to see it for you to use.

I plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???

i plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???

Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?

I want to play music bought from itunes on my new computer but apple id is old email address no longer accessible and password forgotten. Security information date of birth also not accepted

I want to play music bought from itunes on my new computer but apple id is old email address no longer accessible and password forgotten. Security information date of birth also not accepted. No good apple sending reset information to old email address as I cannot access it

Welcome to the Apple Community.
The following article(s) may help you.
Moving your iTunes library to a new computer

HT201250 I had to replace the hard drive in my old MacBook. I replaced it. Installed OSX10.6. Then using the system software I reinstalled data from my Time Machine backup. On completion it asked for my password. It is not accepted. I am locked out how I

I had to replace the hard drive in my old MacBook. I replaced it. Installed OSX10.6. Then using the system software I reinstalled data from my Time Machine backup. On completion it asked for my password. It is not accepted. I am locked out how I overcome this?
I was already using 10.7. But only had the disc for 10.6.

Sorry I am new to this. Am I in the right area? I am using my iPhone to make contact. I am worried.

I need to install iWork 09 so I can open the many pages document files that will NOT open under the new pages 5. Mavericks will not accept an install from my iWork's 09 CD. How do I get around this?

I need to install iWork 09 so I can open the many pages document files that will NOT open under the new pages 5. Mavericks will not accept an install from my iWork's 09 CD. How do I get around this?

Hi, I'm helping StringSinger2 with this problem.
The previously installed version is Pages 3.0.3 (the same as from iWork 08). This version (Pages 3.0.3/iWork 08) is incompatible with Pages 5.
That is why it would be helpful to install iWork 09, which is the version between the two. It will open the older 08 files, and its saved files are readable by the new Pages5.
SO...
When I try to install iWorks 09 from my retail DVD the error message is "the installer is damaged". (I know the dvd is good, I installed iWorks09 to my laptop today.) Is the "installer" part of the system files? And - If that is damaged is there a patch for that?
Many Thanks!

Adobe Bridge does not accept the NEF files from my new Nikon D800. I use the latest version, there a

Adobe Bridge does not accept the NEF files from my new Nikon D800. I use the latest version, there are no updates

Hi,
CS6
Van: R_Kelly [email protected]
Verzonden: maandag 16 september 2013 18:42
Aan: Hans van Sloten
Onderwerp: Adobe Bridge does not accept the NEF files from my new Nikon D800. I use the latest version, there a
Re: Adobe Bridge does not accept the NEF files from my new Nikon D800. I use the latest version, there a
created by R_Kelly <http://forums.adobe.com/people/R_Kelly> in Photoshop for Beginners - View the full discussion <http://forums.adobe.com/message/5686078#5686078

I have moved from the UK to New Zealand and Itunes will not accept my new Zealand bank details, as a result nothing will work on my phone and I cant access emails!

I have moved from the UK to New Zealand and Itunes will not accept my new Zealand bank details, I am trying to change my details on the Iphone 4s

Do you have a new Apple ID to use in NZ? If not open iTunes Store. Log out of your old Apple ID, then try to login. Select Create Apple ID from the dialog that appears. Make a new Apple ID for NZ with a NZ email address. Once that is approved and verified, log into the iTunes Store with the new Apple ID. This should fix all other issues.
Change iTunes Store Country on an iDevice
1. Tap Settings;
2. Tap iTunes & App Stores;
3. Tap View Apple ID;
4. Enter your user name and password;
5. Tap Country/Region;
6. Tap Change Country/Region;
7. Select the region where you will be located;
8. Tap Done.
Also, see How to Change Your iTunes Store Account Location | eHow.com.

Serial Number Not Valid- new Windows 7pro/ fresh install of Creative Suite 5 Design Premium Win from download will not accept license key. This serial number is not valid for this product is the only response.

Serial Number Not Valid- new Windows 7pro workstation / fresh install of Creative Suite 5 Design Premium Win from download will not accept license key to install. This serial number is not valid for this product is the only response being returned. What am I missing?

The key is for Creative Suite 5 Design Premium the download is DesignPremium_CS5_5_LS1 and all associated files in the group.

Hyper-V port ACLs not accepted from VMM

Similar Messages

Maybe you are looking for