HYPER-V problem (Thinkpad Twist with Win 8 Pro 64bit and 8GB Ram)

Hi, I have the problem to run hyper-v and getting the error "hypervisor" is not running. I have checked my hardware and OS should be able to run, and also done the command "bcdedit /set hypervisorlaunchtype auto". Does anyone got the same problem or advise?
Thanks.

i am not sure if this is applicable to you.
http://forums.lenovo.com/t5/ThinkPad-Edge-S-series/Thinkpad-Edge-e335-Virtualization-issue/m-p/11525...
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Similar Messages

Thinkpad T400, Win 7 Pro 64bit and sleep

I have a ThinkPad T400 laptop that is running Windows 7 Professional 64bit with SP1. I use a docking station with it as well. When I go home at night, I put the computer to sleep, undock it and take it home with me. On most nights, I don't do anything else with it. When I come in in the morning, I put it in the dock and start it up. However, when I do this, it takes about 5 minutes for the logon screen to appear and another minute or two before I can actually do anything. I've tried different docks with the same result. It isn't hibernating either. Any ideas what may be causing this? I thought Windows 7 was supposed to be fast to resume?

I tend to agree with the suggestion that it's waking from sleep and hibernating. It is at least a strong possibility.
Does it say "resuming windows"?
OTOH, 5 minutes plus is way too long for a normal resume from hibernation. I just tested my T400/Win7 Pro 64. It takes 30 seconds from power on (resuming from hibernation) to the desktop. I don't require a login on resume.
I don't have SP1 installed. The graphics driver prevents that for now.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Thinkpad Twist with Windows 7 - screen rotation

So a client of mine bought the Twist with Windows 8 on it and really did not like windows 8 and asked me to repalce the install with Windows 7, wiping out the drives .... I managed to get all but 2 devices identified and install, one has an ID of PNP0C40 which is related to a button and the other one PNP0C60 is related to a convertable laptop display sensor.
The PNP0C60 is likely related to my problem, no screen rotation.
Is there a driver for this sensor that might work with Windows 7?
If the answer is, we do not support windows 7, could someone reccomend a forum where folks are trying to downgrade the Twist to 7? my searches come up with mostly amazon reviews.
Thanks, if anyone needs help with any of the other drivers for Win 7 on the Twist ... I'd love to help
Ken

I was in the same scenario, my company bought a Twist for testing but we want Windows 7 because we can't train everyone on using Windows 8.
I finally found a project on SourceForge that seems to be working great.
http://yeokhengmeng.com/2013/01/auto-rotate-screen
I had to install the ThinkVantage Active Protection System before the program would function.
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS014892
It's a simple install, you calibrate the different rotations of the laptop, read the README it will tell you how to get going, it takes 5 minutes.
I added it as a startup item for all users but I had to follow these instructions to get rid of a security prompt.
http://www.technipages.com/disable-publisher-could-not-be-verified-messages.html
I've been testing it and it's almost better than using the built-in button because it's automatic.

How can I see CR2 photos in Bridge (using Win 8.1 Pro 64.bit). With Win 7 Pro there is no problem.

How can I see CR2 photos in Bridge (using Win 8.1 Pro 64.bit). With Win 7 Pro there is no problem.

There is a Bridge Forum:
Bridge General Discussion
You may want to mention the camera type, though.

Why i can't install itunes on my PC with win 7 pro 32 bit ?

dear apple.
Could you tell me how to install itunes 10 or 11 on my pc with win 7 pro 32 bit ?
when i try to installing itunes my PC has appear error so i can't complet install itune on my PC
Im trying many time but it just send me error and i cant finish installing itunes
So could you tell me how to fix that ?
Thanks
Jonny

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Tried to install iTunes with Win 7 Pro and I get an error 2 message that tells me to uninstall and reinstall iTunes. I get the same failure each time.

Tried to install iTunes with Win 7 Pro and I get an error 2 message that tells me to uninstall iTunes and reinstall, same error occurs. What's up?

Hello, rodneywjr.
Thank you for visiting Apple Support Communities.
Here are a couple troubleshooting articles that I would recommend going through when experiencing this issue.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/ts5376
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Cheers,
Jason H.

Is CSA V5.1r106 compatible with WIN XP Pro 64 bit?

Does anyone know if CSA V5.1r106 is compatible with Win XP Pro 64 bit?

Not at this time. There is more information here:
http://www.cisco.com/en/US/products/sw/secursw/ps5057/products_qanda_item09186a008049ad72.shtml#qa21
Tom

Personas suddenly not working Firefox 30, 31, 32 on Win 7 Pro x64 and Linux Mint 16 x64

Personas which have been working for a long time suddenly quit working on Win 7 and Linux. I tried changing to a different persona to change the background for the top border of the window and it just goes to some odd color and the personas just don't show up. This has been with Firefox 30, 31, 32. The personas still work with Win XP Pro run as a virtual machine on Win 7 host or Win 8 host. I thought it was a Windows thing until I saw the same problem with Linux. Everything else seems normal so this isn't a real bad problem. It's just odd.

Make sure that you do not run Firefox in permanent Private Browsing mode (Never remember history).
*https://support.mozilla.org/kb/Private+Browsing
*Tools > Options > Privacy > Firefox will: "Use custom settings for history"
*Deselect: [ ] "Always use Private Browsing mode"

MAR WIN 7 PRO 64bit on Refurb T520

I have ordered a T520 refurb. It apparently has MAR WIN 7 PRO 64bit installed on a 250GB 7200 HD. No discs, so presumably there will be a recovery partition.
Question 1: Will I be able to burn a recovery CD from the recovery partition?
Question 2. I would like to install an SSD as the main drive. Can I clone the entire HD including recovery partition and keep it as a back up? Maybe install in Ultrabay and partition it so I can use it in part for data.
Question 3. If I needed to download and install a Win7 Pro 64 bit ISO, will it work using the MAR license?
Question 4. I think I read something about loss of functionality of Thinkvantage when using MAR Windows because Flextronics/IBM are not fully licensed to offer some features. Is this true? I may have misunderstood.
Any other pitfalls of MAR I should know about?

"All the Lenovo software will not be included, and probably the drivers they have on file for the system. That would be because the company does not have a contract with Lenovo (I am guessing here) but as far as I know that does not stop you from getting it. BUT you will not get the other software that is loaded on Lenovo's at the factory. That may be what they are talking about. But Windows is windows. Say for instance you have Windows 7 Premium Home, it will be the same as if Lenovo installed it, or you installed it yourself.
One issue you may have. Recovery discs. Are you getting any Discs with the computer, or does it have a recovery partition. You have to get one or the other at the cost of the remanufacturer"
I am finding that there are differences with the IBM/Flextronics refurb machine. They say in a FAQ that because they are not legally allowed to use the Lenovo operating software, the Thinkvantage button is deactivated. If I hit downarrow (or is it F12), and get to the boot choice screen, there is an option at the bottom for recovery. This uses the recovery partition and will apparently over write the windows installation, losing set up etc.
What I was looking for, was a method to backup the recovery partition to DVD or USB stick just in case drive itself fails. But I don't see a way to do that other than cloning the entire disk. Is there another way?

BUG - saving with both flash pro CS6 and CC causes library symbol names to change

Concise problem statement:
If you save with flash pro CC and then save with CS6, in the library panel, symbol names are changed.
Specifically, pipes | and trailing spaces ("|Divider", "Divider ") get replaced by escape sequences ("&#124Divider", "Divider&#032" ...) Ampersands & and number signs # also get replaced, such that symbol names grow exponentially if you continue to save with both flash pro CC and CS6 ("Divider&#032", "Divider&#038&#035032", "Divider&#038&#035038&#038&#035035032" ...) This makes it difficult to transition a team from CS6 to CC.
Sometimes, the original-name symbol remains, and an escaped-name symbol is also created. In this case, the children are removed from the original-name symbol, so it doesn't render anything to the screen; a mysterious, silent failure.
Steps to reproduce bug:
1. Create a library symbol named "|", save an xfl with flash pro CC, and close.
2. Open, save, and close with flash pro CS6.
3. Open, save, and close with flash pro CC.
Results:
A library symbol named "&#124".
Expected results:
A library symbol named "|".
I submitted this bug with the bug form, and also with adobe bugbase (in case it isn't obsolete) - I'm just trying to maximize my chances of getting a fix. Has anyone else encountered this bug?

Hi,
We are aware of this issue and its open for investigation internally. This issue is observed when you have certain special characters in your symbol names and try to open that file in Flash CS6. This happens due to a change in the way symbol naming is handled in Flash CC and in Flash CS 6.
As a workaround, request you to use only Underscore or Hyphen as special characters while naming symbols or library layers etc.
We shall update you as soon as this has been fixed.
Thanks,
Nipun

Looking to purchase a new 13" MacBook Pro with 512GB SSD memory and 8GB ram. Main purpose is to run Final Cut Prowithout being at my desk. Is there's need to upgrade to the 16GB to make Final Cut Prorun more smoothly?

I was planning on buying a new 13 inch MacBook Pro with 512 GB memory and 8GB RAM. The main purpose for this purchase Is to be able to run Final Cut Pro anywhere I want to. Should I upgrade to 16 GB of RAM with the added expense and wait time or is that overkill?

8GB should be plenty . . . though as with most things in life, it all depends on exactly what you are doing. If you intend to edit long, highly complex projects loaded with effects and multicam clips you can't get enough RAM.
For over 3 years, I and many others, have been using 4GB with no problems.

XDCAM HD workflow with Adobe Premiere Pro CC and Macbook Pro

Hi folks,
I have an assignment for a TV production to secure and convert the data (mxf files XDCAM HD 422 1080i 50 / 50 Mbit/sec with 8 audio channels) from Sony XDCAM camcorders (PDW-700) for postproduction.
The producer wants me to convert the mxf files during production to Apple ProRes 422 (HQ) for faster and smooth editing during postproduction.
I'm not sure about the final output yet, but I guess it will be either 720p50 or 1080i 25, since the production will be broadcast and as far as I know this is the standard for HD on German television. It is also not clear which NLE will be used for editing (usually one of the producers edits their projects with FCP, but this time they've got their hands full and are still looking for someone to outsource postproduction.
Unfortunately, my Macbook is getting fixed as we speak, so I can't try things out.
Since this is the first time I'm doing this workflow, could someone please check if I got everything right?
1. Can someone please confirm that I can actually convert the mxf files using AME CC to Apple ProRes 422?
Or do I need to install any other tools/converters for this task? Does MPEG streamclip do the job? Any other freeware?
2. When converting to Apple ProRes422, the producer suggested to deinterlace the footage (1080i 50) to 25p, if 720p or 1080p I have to find out tomorrow since our conversation got interrupted this afternoon.
In my opinion this doesn't make sense, though. First, if output to 1080i 25 it has to stay interlaced anyway. Second, in case the output will be 720p 50 I would edit the footage either natively or in Apple ProRes 422, but leave deinterlacing until the very end when outputting to the final format. This way I could use an advanced deinterlacer, e.g. the one from Magic Bullet Suite, rather than just checking some deinterlace box in the export settings for Apple ProRes 422.
The reason the producer suggested to deinterlace right away when using an intermediate like ProRes was that she and the client got irritated by the jagged lines from the interlaced footage when editing the last project with the same requirements on a progressive display.
3. What would be the best solution to tackle this issue (jagged lines) during editing?
As I said my Mac is getting fixed, so I have no way of trying things out,and I usually edit DSLR footage which is progressive anyway.
But if I remember correctly I can switch my monitor between 1080p and 1080i. This should do the trick, shouldn't it?
4. Can I keep all of the 8 audio tracks when converting to ProRes using AME CC ?
5. Is ProRes422 (HQ) really necessary, or is the regular quality sufficient for this kind of job?
6. Let's assume the whole project would be edited within Adobe Premiere Pro CC and system specs as stated below:
Since Adobe Premiere Pro CC has native support for XDCAM HD is there any advantage of using an intermediate like ProRes at all?
How smooth is native editing with XDCAM HD in Premiere Pro CC? I don't think there will be more than 3-4 video tracks in use...
Thanks for your help!
working with
Adobe Premiere Pro CC and Adobe Media Encoder CC
Apple MacBook Pro
Intel Core i7 Quad Core Prozessor
2.3 GHz and 6MB L3 Cache
16 GB RAM 1600MHz DDR3,
256 GB SSD
Intel HD Graphics 4000 512MB + nVidia GeForce GT 650M with 1 GB GDDR5 RAM

Thanks Jim! I knew there must be a reason xdcam is widely uses for eng aquistion :) I think they used FCP 6 or 7 on their last project... So what about monitoring interlaced footage on a progressive screen? Any advice on that? Is there a converter built in to APP CC that deinterlaces in realtime when monitoring interlaced sources on a progressive screen? And would you agree that deinterlacing source material is best left right before outputting?

Tried to open a pdf document with Acrobat XI Pro Trial and sign in popped up , I keyed in my username and password but it doesnt respond its like grey with the four dots rotating forever. Any solution Please ?????

Tried to open a pdf document with Acrobat XI Pro Trial and sign in popped up , I keyed in my username and password but it doesnt respond its like grey with the four dots rotating forever. Any solution Please ?????

Hi higi97,
How are you connected to the internet? Are you behind a particularly secure corporate firewall? Are you on Mac or Windows? Do you have any anti-malware software running on your machine that may be preventing applications other than your browser from connecting to the internet?
You may try to follow the steps below:
1.Close the Creative Cloud application.
2.Navigate to the OOBE folder.
Windows: [System drive]:\Users\[user name]\AppData\Local\Adobe\OOBE
Mac OS: /Users/[user name]/Library/Application Support/Adobe/OOBE folder
3.Delete the opm.db file.
4.Launch Creative Cloud.
Let us know if that helps,
Regards,
Rave

Should I buy a macbook air wid i7 and 8gb ram or macbook pro with 2.4ghz i5 and 8gb ram

Hii.i am planning 2 buy a macbook and i am confused between pro and air so should I buy a macbook air wid i7 and 8gb ram or macbook pro with 2.4ghz i5 and 8gb ram..I want it to be fast and my use is onli web surfing , word & excel, watching movies and loading photos....plss help its urgent

I have a 2 year old Air with 1.8 GHz i5 4 GB that is more than adequate and extremely fast for the uses you describe.
Is battery life a factor in your decision? If so, knowing that may help someone else give you some more input.

I am attempting to re sync my iPad2 with my macbook pro iTunes and i get all the way to where it tells me to connect to iTunes...which my iTunes on my macbook sees as connected, yet my iPad still tells me to connect to iTunes...

I am attempting to re sync my iPad2 with my macbook pro iTunes and i get all the way to where it tells me to connect to iTunes...which my iTunes on my macbook sees as connected, yet my iPad still tells me to connect to iTunes...AND yet it is connected..HELP

Your iPad is going to show "Connect to iTunes" screen until you either set it up successfully or restore it. If you've already set your iPad up in the past, "Connect to iTunes" typically indicates the iPad is in Recovery Mode and you must restore it.

HYPER-V problem (Thinkpad Twist with Win 8 Pro 64bit and 8GB Ram)

Similar Messages

Maybe you are looking for