Hyper-V - virtual machines don't start automatically after power outage

Hi,
I have a HP server running Windows 2012 R2 + Hyper-V. On this server, four VM have Windows Server 2003 R2, and one VM has Windows 2012. After power outage, 1 2003 R2 VM and 1 2012 VM are started properly, but the other three machines aren't. I've started
it manually. All VM's have last version of Hyper-V integration tools installed, the option "Automatically start VM if it was running before the service was stopped" was chosen. I'm not very familiar with Hyper-V, so, I've investigated only Hyper-V-VMMS
event log. There are some recurring errors:
The Integration Services Setup Disk image could not be updated: The process cannot access the file because it is being used by another process. (0x80070020).
and
Failed to get the disk information.
But I think it isn't a clue.
How can I clarify, why these machines aren't started automatically?

Hi EugenBerend,
Maybe it is related to system resources allocation during the start up .
I would suggest you to configure a startup delay for those lower priority machines so that system
can locate enough resource for them.
Hope it helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Option that SAP starts automaticly after power loss

I am using an windows/sql ECC 6.0 server. I would like option that SAP starts automaticly after power loss. Is it possible and how?

Hi
I think this not possible.
Thanks
Pankaj Kumar

Hyper-V virtual machines may not start, and receive the error: Microsoft Emulated IDE Controller (Instance ID {83F8638B-8DCA-4152-9EDA-2CA8B33039B4}): Failed to Power on

I have used the Article ID: 2249906 to try and resove this error. It only started since I have created a dediacted SQL 2008 Server on the network. This is my attempt, so far using icacls:
icacls "C:\Users\Public\Documents\Hyper-V\Virtual hard disks\XYZ-SQL.vhd" /grant "NT VIRTUAL MACHINE
\13101CB0-271Z-4434-9736-E1DE331D316BZ":F
NT VIRTUAL MACHINE\13101CB0-271Z-4434-9736-E1DE331D316BZ: No mapping between account names and security
IDs was done.Successfully processed 0 files; Failed processing 1 files
Any ideas as this is becoming very disruptive to the network as the VM is a DC.
Many Thanks
Paul.B

From your description it sounds as if you have two VMs trying to use the exact same virtual disk. And this is not possible without using differencing disks in between. (it will give the error you describe when trying to power on the second).
Beyond that, I would have expected the configuraiton change to work. Another possibility is simply creating a new VM using the existing virutal disk. This is non-descructive as well and absolutely re-creates all of the VM objects and generates
new security identifiers.
If that does not work, then there is more to this puzzle than has been mentioned here and you will need to provide greater detail.
Brian Ehlert (hopefully you have found this useful) http://ITProctology.blogspot.com
Learn. Apply. Repeat.

Nested Hyper v virtual machine won't start

I have a development environment on Hyper-v i want to be able to develop windows phone apps for this i need a Hyper v installation on my dev environment so i installed Hyper-v.
But if i start debuging the virtual hyper v says : The Virtual Machine Management Service failed to start the virtual machine 'Emulator 8.1 WVGA 4 inch.administrator' because one of the Hyper-V components is not running (Virtual machine ID)
can anybody help me out on this one as it looks all good. If i try to start the hyper v machine within hyper v i get the same error.
thanks in advance.
Check my website http://kbworks.nl or follow me on
@KbWorks be sure to Check my
SharePoint-Specialist.nu for dutch information workers check
Wat Is microsoft SharePoint.nl for dutch readers who want to know what
microsoft office365 is.

Hi Paul Keijzers KbWorks,
Additional, Windows Phone 8 Emulator runs as a virtual machine on Hyper-V, the virtualization technology for Windows 8. To run the emulator, your computer must meet the requirements
to run Hyper-V. Please refer the following article to realize more detail require about the WP emulator install requirement.
System requirements for the emulator for Windows Phone 8
https://msdn.microsoft.com/en-us/library/windows/apps/ff626524(v=vs.105).aspx
How to enable Hyper-V for the emulator for Windows Phone 8
https://msdn.microsoft.com/en-us/library/windows/apps/jj863509(v=vs.105).aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Unable To Start TimesTen after Power Outage

TimesTen 7.0.5.0.0 Solaris 64-bit
Platform: Solaris 10
Hardware: SUN Netra CP3260 Blade
We had a brief power outage in our lab a couple of days a go. After the machines came back up, I noticed that we couldn't start TimesTen on three of the machines. When trying to start via ttDaemonAdmin I see the following message:
[root]machine1:/ ttDaemonAdmin -start -force
Can't obtain admin user name
Can't obtain admin user name
[root]machine1:/
Does anyone know what this error means and how to fix it?

I originally reported this issue against tt 7.0.5.0.0. However 2 machines with the problem are 7.0.3.1.0 and 1 machine is 7.0.5.0.0. I got 2 machines going again by uninstalling TimesTen and re-installing it. I'm keeping the third one in this state in the hopes of finding another way to recover it besides uninstall and re-install.
[root]kansparc54116:/ ldd `which ttDaemonAdminCmd`
libtten.so => /TimesTenInstance/lib/libtten.so
librt.so.1 => /lib/64/librt.so.1
libpthread.so.1 => /lib/64/libpthread.so.1
libthread.so.1 => /lib/64/libthread.so.1
libsocket.so.1 => /lib/64/libsocket.so.1
libnsl.so.1 => /lib/64/libnsl.so.1
libm.so.1 => /lib/64/libm.so.1
libc.so.1 => /lib/64/libc.so.1
libdl.so.1 => /lib/64/libdl.so.1
libttco.so => /TimesTenInstance/lib/libttco.so
libaio.so.1 => /lib/64/libaio.so.1
libmd.so.1 => /lib/64/libmd.so.1
libmp.so.2 => /lib/64/libmp.so.2
libscf.so.1 => /lib/64/libscf.so.1
libdoor.so.1 => /lib/64/libdoor.so.1
libuutil.so.1 => /lib/64/libuutil.so.1
libgen.so.1 => /lib/64/libgen.so.1
libm.so.2 => /lib/64/libm.so.2
/platform/SUNW,Netra-CP3260/lib/sparcv9/libc_psr.so.1
/platform/SUNW,Netra-CP3260/lib/sparcv9/libmd_psr.so.1
[root]kansparc54116:/
[root]kansparc54116:/ ttVersion
TimesTen Release 7.0.3.1.0 (64 bit Solaris) (tt70:15000) 2007-10-30T22:17:07Z
Instance admin: root
Instance home directory: /TimesTen/tt70
Daemon home directory: /var/TimesTen/tt70
[root]kansparc54116:/
[root]kansparc54116:/
[root]kansparc54116:/ ttDaemonAdmin -start -force
Can't obtain admin user name
Can't obtain admin user name
[root]kansparc54116:/
[root]kansparc54116:/ ls -l /TimesTenInsta*
lrwxrwxrwx 1 root other 14 May 22 21:13 /TimesTenInstance -> /TimesTen/tt70/
[root]kansparc54116:/

Computer won't start up after power outage....

We just had a power outage when our computer was on and now that our power is back, the computer won't start up. (I'm typing this on our power book!) I hold in the button on the back, get the "bong" and then the computer whirs for a while with a black screen and then just dies. What to do??

You can, in addition to Barry's excellent suggestions, reset the SMU.

Imac will not start up after power outage

My iMac G5 will not turn on after the power went out. I can hear a clicking noise which seems to be coming from the fan/power supply area when it is plugged in. Nothing happens when the power button is pressed. Tried resetting PMU and still nothing. What do you think the problem could be? Bad power supply?
Thanks.
iMac G5 17" Mac OS X (10.4.9)

I just went through the steps of troubleshooting with an iMac that won't turn on using the led indicators with the back taken off, the first led light lights but it seems to blink very quickly (in unison with the clicking noise), does not stay solid. After pressing the SMU and then the internal power button, nothing happens again, and the 2nd led light does not light even momentarily. So it tells me that I need a new logic board...what kind of costs are we talking about here, anybody have a ballpark idea? Thanks for the help.
Pat

Windows 8 Hyper-V - Virtual Machine Management Service failed to start the virtual machine

I have Hyper-v running on Dell Precision T3600 with Windows 8 OS. I am trying to start a VM (called Windows8VM) to install Windows 8 in the hyper-v virtual machine, but I keep getting the following message:
"Windows8VM" failed to start.
Failed to start the virtual machine "Windows8VM" because one of the Hyper-V components is not running.
"Windows8VM" failed to start. (Virtual machine ID D670D3BB-9AE2-0453D-9191-EA6EFC242A9C)
The Virtual Machine Management Services failed to start the virtual machine "Windows8VM" because one of the Hyper-V components is not running.
I have turned the hyper-v feature on in the "Turn Windows feature on or off. The BIOS has virtualization enable. Help!!! driving me nuts for a week now.
Nick :(

Okay, I turned off hyper-v, went to bios and enabled Intel TXT(LT-SX) Configuration. Made sure that both Virtualization and VT for Direct I/0 are on. Next, I turned on Hyper-V and I create a brand new Virtual Machine call Windows8 and had
the DVD point to Windows8 ISO file on hard drive. When I clicked on start, it stayed in the Starting status mode for about 5 minutes. Then of course it failed. I looked at the Hyper-V-VMMS log and here is what it output:
Log Name: Microsoft-Windows-Hyper-V-VMMS/Admin
1) Error: The virtualization infrastructure driver (VID) is not running.
2) Info: Found a certificate for server authentication. Remote access to virtual machines is now possible.
3) Info: Successfully started the Virtual Machine migration connection manager.
4) Info: Virtual Machine Management service is started successfully.
5) Info: The WMI provider 'VmmsWmiInstanceAndMethodProvider' has started.
6) Info: The WMI provider 'VmmsWmiEventProvider' has started.
7) Info: The WMI provider 'VmmsWmiInstanceAndMethodProvider' has started.
8) Info: The WMI provider 'VmmsWmiEventProvider' has started.
9) Info: The Integration Services Setup Disk image was successfully updated.
10) Error: The virtual machine bus is not running.
11) Error: 'Virtual Machine Bus' driver required by the Virtual Machine Management service is not installed or is disabled. Check your settings or try reinstalling the Hyper-V role.
12) Error: 'Storage Virtualization Service Provider' driver required by the Virtual Machine Management service is not installed or is disabled. Check your settings or try reinstalling the Hyper-V role.
13) Error: The Virtual Machine Management Service failed to start the virtual machine 'Window8' because one of the Hyper-V components is not running (Virtual machine ID 2B393AF4-7B7E-4243-805B-23C09D20F4FB).
14) Error: 'Window8' failed to start. (Virtual machine ID 2B393AF4-7B7E-4243-805B-23C09D20F4FB)
Nick

Blade server is start but virtual machine is not started

i have a oracle virtual machine on blade server if any outage or planned activity is done the blade server is started automatically but virtual machines is not started
manually start the virtual machines any suggestions kindly share me.

Hi user,
As long as youhave access to the linux sever from your windows server, you're good to go. Open your admin tool, go to File --> Open --> Offline.
The Open window pops up. On the "File Name" field, enter the path of rpd file in the linux server (Ex: \\Server_Name\local\MyRpd.rpd). Select the file, and voilà!
I hope this helps.
J.

Hyper v virtual Machines should have installed integrated services or not ?

Hi
In my prodcution found hyper v virtual machines have no integrated services was installed should we installed on production servers is any impact if we didnt installed them.
if it should installed then what is the best approch to installed.
Thanks

You posted in the Group Policy forum...
That's a good question for the Hyper-V forum:
http://social.technet.microsoft.com/Forums/en-US/home?forum=winserverhyperv
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

[Forum FAQ] Resolve virtual machines fail to start issues

After you restart the Hyper-V Host server and the guest virtual machines, you may encounter the error:
An error occurred while attempting to start the selected virtual machines(s).
Here are three common issues.
Issue 1
On a Windows Server 2008-based machine that has the Hyper-V role installed,
or on a Microsoft Hyper-V Server 2008-based machine, you encounter the following:
• When you try to connect to a virtual machine, error occurs:
Cannot connect to the virtual machine because the authentication certificate is expired or invalid. Would you like to try connecting again,
• When you start a virtual machine, error occurs (Figure 1):
An error occurred while attempting to change the state of virtual machine
‘VMname’
'VMName' failed to initialize.
Could not initialize machine remoting system. Error: ‘Unspecified error’ (0x80004005).
Could not find a usable certificate. Error:
‘Unspecified error’(0x80004005).
Figure 1: ‘Unspecified error’ (0x80004005).
Cause:
This issue may occur if the Hyper-V Virtual Machine Management service (VMMS) certificate has expired.
Solution:
Install the Hotfix.
You cannot connect to a virtual machine when the Windows Server 2008 Hyper-V VMMS certificate has expired
http://support.microsoft.com/kb/kb967902/en-us
Workaround:
Follow the steps below to generate a new certificate.
1. Shut down or save all virtual machines.
2. Restart the Hyper-V VMMS.
3. Start the virtual machines.
Note:As the Hyper-V VMMS certificate is valid for one year, the update has to be applied to prevent this issue from occurring in the future.

Issue
2
If there is no enough system resource, this error may occur (Figure 2) and you will receive Event ID 3040.
Figure 2: No enough system resource
Product:
Windows Operating System
ID:
3040
Source:
Microsoft-Windows-Hyper-V-Worker
Version:
6.0
Symbolic Name:
MSVML_WP_INITILIZATION_ERROR
Message:
'%1' failed to initialize. (Virtual machine %2)
Troubleshooting:
You need to check the following:
1. Permissions of the configuration files, memory files and all VHD files.
2. Prior messages in the event log.
3. Available RAM on the system.
4. Free disk space for the storages of the memory files and expanding virtual hard disks.
In addition, if you are using the VMMS, please restart the VMMS service.
CMD:
net stop nvpswmi
net start nvspwmi
PowerShell:
C:\PS>restart-service vmms
http://technet.microsoft.com/en-us/library/dd581971(v=ws.10).aspx

Components don't start automatically, is that normal?

Hi
I installed the 9iAS R2 Portal Server, both the infrastructure and the portal.
I understood that the components should start automatically. I'm talking about the following comps:
-Internet Directory
-HTTP Server
-OC4J_DAS
-HTTP Server
-OC4J_Portal
-OC4J_Wireless
-Single Sign-On:orasso:7777
-Portal:portal:7778
-Web Cache
-Wireless
However, they don't start automatically. Or at least, they don't do fast enough and I'm assuming they don't do at all. So I'm starting them manually and that takes time.
Should they start automatically or not?
TIA,
Brian

It depends on your platform. For Linux, UNIX and HP-UX, I am almost sure that these services need to be manually started after machine startup - unless of course (in the case of Linux) you have these start up scripts written and part of the /etc/init.d directory from where it is invoked at time of start up.
Re: your comment about it being funny that you should know this since you teach a portlet class for Oracle University......Oracle Univ Education is very pricey I would hate to think that I am attending a class where the instructor is not up to snuff on such basic matters.
Message was edited by:
mathewjn

Restored Hyper-V Virtual Machine Snapshots by error

Hi Everyone,
We are facing a disaster !!, One of our team restored an old Hyper-V Virtual Machine Snapshot by error which erased our recent databases. So i'am wondering is there a miracle to restore that data. Like we can flashback to 3 hour later.
Help is very appreciated !!
Yasser Emad

Hi Yasser,
Unless a snapshot was taken just before reverting back to the old snapshot, or a backup exists, I'm afraid I don't believe there is.
Is this a checkpoint from failover cluster manager or SCVMM?
Kind Regards
Michael Coutanche
Blog:
Twitter: LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Cant create replica and Hyper V virtual machine management service slow shutting down

Hi,
I cant create replica and Hyper V, I go through the process and all looks good it even starts to create the hard disk but it stops at 4096K and the wizard just keeps going.
The management console is also slow or wont load virtual machines - stuck on loading virtual machines
The Hyper V virtual machine management service slow shutting down over 30 minutes on re boot of Hyper V core 2012 R2
Any ideas ?

Hi Sir,
I assume that you have a standalone hyper-v server 2012R2 and you are using hyper-v manager to manage the hyper-v host .
Which system you are using to manage hyper-v host , win8 or win8.1 or other ?
Have you created VMs on the HOST ?
I would suggest you to create vhd or someother operation on hyper-v host directly to check the result .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Create Protection Group Hyper-V Virtual Machines Not Listed

Hello,
We are in the process of testing DPM 2012 R2 and we are trying to backup our Hyper-V virtual machines on both cluster hosts and stand-alone Hyper-V hosts. We have deployed the DPM agent to all cluster hosts and the stand-alone hosts, but when we go
to create a protection group, we do not see Hyper-V Virtual Machines listed under "HyperV". We are expecting Virtual Machines to show up as shown in Step 7 of this guide: http://blogs.technet.com/b/kevinholman/archive/2013/11/07/dpm-2012-r2-quickstart-deployment-guide.aspx.
We have DPM 2012 R2 UR4 installed and Hyper-V role is enabled on the DPM server.
Is there something extra we need to do or something we are doing wrong?
Thank you.

Gleb,
Thank you for your help. For our cluster, we realized we weren't seeing any VM's under the Cluster Node because an agent was not installed on our of the Hyper-V hosts in the cluster. As for the stand-alone Hyper-V host and the cluster node listing
within the "Create New Protection Group" wizard, it looks like MOST of the VM's have the "Backup Using Child Partition Snapshot" option, but no longer show as "Online" or "Offline". I believe this is due to the
way the Hyper-V backups are done w/ DPM which was changed either in R2 or one of the Update Rollups.

Hyper-V - virtual machines don't start automatically after power outage

Similar Messages

Maybe you are looking for