Hyper v virtual Machines should have installed integrated services or not ?

Hi
In my prodcution found hyper v virtual machines have no integrated services was installed should we installed on production servers is any impact if we didnt installed them.
if it should installed then what is the best approch to installed.
Thanks

You posted in the Group Policy forum...
That's a good question for the Hyper-V forum:
http://social.technet.microsoft.com/Forums/en-US/home?forum=winserverhyperv
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Similar Messages

Integrations services error 4000 - integration services does not match the expected version

I have a 2 node high availability cluster built on 2012r2 DataCentre. One VM continually fails to backup and gives the event log error
"Hyper-V Volume Shadow Copy Requestor failed to connect to virtual machine 'QuadPro' because the version does not match the version expected by Hyper-V (Virtual machine ID 094B6B22-BBED-4D0B-8E47-D8D4D0D3F986). Framework version: Negotiated (0.0) -
Expected (3.0); Message version: Negotiated (0.0) - Expected (5.0). To fix this problem, you must upgrade the integration services. To upgrade, connect to the virtual machine and select Insert Integration Services Setup Disk from the Action menu."
When I do the suggested action I get a message stating
"The computer is already running the current version of integration services (version 6.3.9600.16384)".
This VM was built through the failover management console under 2012r2. The VM in question is a 2008r2 standard server running a single database application.
Please advise.
Matt

Hi,
I have run the command using both nodes and get the following error:
PS C:\Users\*******> Get-VMIntegrationService -ComputerName node01 -VMName quadpro
Get-VMIntegrationService : A parameter is invalid. Hyper-V was unable to find a virtual machine with name quadpro.
At line:1 char:1
+ Get-VMIntegrationService -ComputerName node01 -VMName quadpro
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : InvalidArgument: (quadpro:String) [Get-VMIntegrationService], VirtualizationInvalidArgum
   entException
    + FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.GetVMIntegrationServiceCommand
However I tried one of the other VMs for testing purposes (and to check syntax etc) and got the following success message.
PS C:\Users\******> Get-VMIntegrationService -ComputerName node02 -VMName appserver01
VMName      Name                    Enabled PrimaryStatusDescription SecondaryStatusDescription
Appserver01 Time Synchronization    True    OK
Appserver01 Heartbeat               True    OK
OK
Appserver01 Key-Value Pair Exchange True    OK
Appserver01 Shutdown                True    OK
Appserver01 VSS                     True    OK
Appserver01 Guest Service Interface False   OK

Windows 8 Hyper-V - Virtual Machine Management Service failed to start the virtual machine

I have Hyper-v running on Dell Precision T3600 with Windows 8 OS. I am trying to start a VM (called Windows8VM) to install Windows 8 in the hyper-v virtual machine, but I keep getting the following message:
"Windows8VM" failed to start.
Failed to start the virtual machine "Windows8VM" because one of the Hyper-V components is not running.
"Windows8VM" failed to start. (Virtual machine ID D670D3BB-9AE2-0453D-9191-EA6EFC242A9C)
The Virtual Machine Management Services failed to start the virtual machine "Windows8VM" because one of the Hyper-V components is not running.
I have turned the hyper-v feature on in the "Turn Windows feature on or off. The BIOS has virtualization enable. Help!!! driving me nuts for a week now.
Nick :(

Okay, I turned off hyper-v, went to bios and enabled Intel TXT(LT-SX) Configuration. Made sure that both Virtualization and VT for Direct I/0 are on. Next, I turned on Hyper-V and I create a brand new Virtual Machine call Windows8 and had
the DVD point to Windows8 ISO file on hard drive. When I clicked on start, it stayed in the Starting status mode for about 5 minutes. Then of course it failed. I looked at the Hyper-V-VMMS log and here is what it output:
Log Name: Microsoft-Windows-Hyper-V-VMMS/Admin
1) Error: The virtualization infrastructure driver (VID) is not running.
2) Info: Found a certificate for server authentication. Remote access to virtual machines is now possible.
3) Info: Successfully started the Virtual Machine migration connection manager.
4) Info: Virtual Machine Management service is started successfully.
5) Info: The WMI provider 'VmmsWmiInstanceAndMethodProvider' has started.
6) Info: The WMI provider 'VmmsWmiEventProvider' has started.
7) Info: The WMI provider 'VmmsWmiInstanceAndMethodProvider' has started.
8) Info: The WMI provider 'VmmsWmiEventProvider' has started.
9) Info: The Integration Services Setup Disk image was successfully updated.
10) Error: The virtual machine bus is not running.
11) Error: 'Virtual Machine Bus' driver required by the Virtual Machine Management service is not installed or is disabled. Check your settings or try reinstalling the Hyper-V role.
12) Error: 'Storage Virtualization Service Provider' driver required by the Virtual Machine Management service is not installed or is disabled. Check your settings or try reinstalling the Hyper-V role.
13) Error: The Virtual Machine Management Service failed to start the virtual machine 'Window8' because one of the Hyper-V components is not running (Virtual machine ID 2B393AF4-7B7E-4243-805B-23C09D20F4FB).
14) Error: 'Window8' failed to start. (Virtual machine ID 2B393AF4-7B7E-4243-805B-23C09D20F4FB)
Nick

Error Creating VM on 2011 iMac - The Hyper-V Virtual Machine Management service encountered an unexpected error: The remote procedure call failed. (0x800706BE).

I am running Hyper-V in Windows 8.1 on a late 2011 27 inch iMac. Whenever I try to create a virtual machine I get the error below and Windows warns that it will restart in 1 minute. I tried a clean install of Windows, but my PC still crashes ever
time I try to create a VM. I was able to successfully use Hyper-V in prior versions of Windows on this same PC. Any clue as to what is going on? A driver? Windows 8.1? Mac Hardware related?
I see the following two entries in event viewer but have no other clue as to what is happening:
Log Name:      Microsoft-Windows-Hyper-V-VMMS-Admin
Source:        Microsoft-Windows-Hyper-V-VMMS
Date:          1/10/2014 10:48:46 AM
Event ID:      16000
Task Category: None
Level:         Error
Keywords:
User:          SYSTEM
Computer:      Charles-PC.CHARLESPOOL.local
Description:
The Hyper-V Virtual Machine Management service encountered an unexpected error: The remote procedure call failed. (0x800706BE).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066F867-7CA1-4418-85FD-36E3F9C0600C}" />
    <EventID>16000</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2014-01-10T15:48:46.770451300Z" />
    <EventRecordID>58</EventRecordID>
    <Correlation />
    <Execution ProcessID="2488" ThreadID="8704" />
    <Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
    <Computer>Charles-PC.CHARLESPOOL.local</Computer>
    <Security UserID="S-1-5-18" />
</System>
<UserData>
    <VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
      <ErrorMessage>%%2147944126</ErrorMessage>
      <ErrorCode>0x800706BE</ErrorCode>
    </VmlEventLog>
</UserData>
</Event>
Log Name:      Microsoft-Windows-Hyper-V-VMMS-Admin
Source:        Microsoft-Windows-Hyper-V-VMMS
Date:          1/10/2014 10:48:46 AM
Event ID:      16010
Task Category: None
Level:         Error
Keywords:
User:          SYSTEM
Computer:      Charles-PC.CHARLESPOOL.local
Description:
The operation failed.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066f867-7ca1-4418-85fd-36e3f9c0600c}" />
    <EventID>16010</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2014-01-10T15:48:46.773497100Z" />
    <EventRecordID>59</EventRecordID>
    <Correlation />
    <Execution ProcessID="2488" ThreadID="8704" />
    <Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
    <Computer>Charles-PC.CHARLESPOOL.local</Computer>
    <Security UserID="S-1-5-18" />
</System>
<ProcessingErrorData>
    <ErrorCode>15005</ErrorCode>
    <DataItemName>Parameter0</DataItemName>
    <EventPayload>
    </EventPayload>
</ProcessingErrorData>
</Event>

Hi CharlesPool,
I am assuming that the win8.1 is in-place updated from win8 .
Maybe you need to check the state of hypervisorlaunchtype .
If it is off , please run command " bcdedit /set hypervisorlaunchtype auto "
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Hyper-V Virtual machine disappeared

Hello,
I am running Windows Server 2008 R2 SP1. I have the Hyper-V role installed with to virtual machines. I rebooted yesterday after windows updates loaded and now one of my virtual machine have disappeared. I have run through hours of technet
forums trying to find the answer and have come up empty.
I checked ProgramData\Microsoft\Windows|Hyper-V\Virtual Machines and the symbolic link is gone. I tried to recreat it using the mklink command, but every time I recreate the symbolic link to the .xml it comes back as a link to a file folder.
I checked the acl on the virtual machine .xml on my D: drive and the GUID SID is missing. I also tried to add it back via the iacls command but it doesn't seem to exist.
After all that, I decided to recreate the entire virtual machine, but now I can't create virtual machines. I get teh following error:
"Failed to create external configuration store at 'folder path': A required privilege is not held by the client. (Virtual machine ID 0x80070522)"
After that error I opend azman.msc and verified that the initalstore.xml has the administrators group in it.
I do not know what else I can do from here. Any help would be appreciated.

Hi Jumar2,
This will help others who are fighting with similar issues.
Thanks for your sharing .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Create Protection Group Hyper-V Virtual Machines Not Listed

Hello,
We are in the process of testing DPM 2012 R2 and we are trying to backup our Hyper-V virtual machines on both cluster hosts and stand-alone Hyper-V hosts. We have deployed the DPM agent to all cluster hosts and the stand-alone hosts, but when we go
to create a protection group, we do not see Hyper-V Virtual Machines listed under "HyperV". We are expecting Virtual Machines to show up as shown in Step 7 of this guide: http://blogs.technet.com/b/kevinholman/archive/2013/11/07/dpm-2012-r2-quickstart-deployment-guide.aspx.
We have DPM 2012 R2 UR4 installed and Hyper-V role is enabled on the DPM server.
Is there something extra we need to do or something we are doing wrong?
Thank you.

Gleb,
Thank you for your help. For our cluster, we realized we weren't seeing any VM's under the Cluster Node because an agent was not installed on our of the Hyper-V hosts in the cluster. As for the stand-alone Hyper-V host and the cluster node listing
within the "Create New Protection Group" wizard, it looks like MOST of the VM's have the "Backup Using Child Partition Snapshot" option, but no longer show as "Online" or "Offline". I believe this is due to the
way the Hyper-V backups are done w/ DPM which was changed either in R2 or one of the Update Rollups.

Windows 10 Technical Preview - There is NO "Hyper-v Virtual Machine Management" service???

hi all,
There's no such Windows Topic as "WTP Virtualization", so I post this thread here, a somewhat "VIRTULIZATION" related.
I installed WTP (not server) x64 enterprise 9879, and added "Hyper-v Management" feature (management only, without Hyper-v core) in Control Panel. Then I found that there was no "Hyper-v
Virtual Machine Management" in Services panel, and there was no such file "c:\windows\system32\vmms.exe". Therefore I cannot connect to Windows Server 2012 R2 Hyper-v through WTP Hyper-v Manager.
I confirm the reason is what I state above. Firewall rules are properly configured on both Hyper-v server and WTP. I also used hvxxxx.wsf to configre anondcom to be "allow". When
I connect WS 2012 R2 through WTP, Hyper-v manager on WTP says "Please confirm VMMS server is running".
Is it a bug, or lack of implementation, or restriction of preview edition?
Any suggestion is appreciated! Thanks!

Okay, I turned off hyper-v, went to bios and enabled Intel TXT(LT-SX) Configuration. Made sure that both Virtualization and VT for Direct I/0 are on. Next, I turned on Hyper-V and I create a brand new Virtual Machine call Windows8 and had
the DVD point to Windows8 ISO file on hard drive. When I clicked on start, it stayed in the Starting status mode for about 5 minutes. Then of course it failed. I looked at the Hyper-V-VMMS log and here is what it output:
Log Name: Microsoft-Windows-Hyper-V-VMMS/Admin
1) Error: The virtualization infrastructure driver (VID) is not running.
2) Info: Found a certificate for server authentication. Remote access to virtual machines is now possible.
3) Info: Successfully started the Virtual Machine migration connection manager.
4) Info: Virtual Machine Management service is started successfully.
5) Info: The WMI provider 'VmmsWmiInstanceAndMethodProvider' has started.
6) Info: The WMI provider 'VmmsWmiEventProvider' has started.
7) Info: The WMI provider 'VmmsWmiInstanceAndMethodProvider' has started.
8) Info: The WMI provider 'VmmsWmiEventProvider' has started.
9) Info: The Integration Services Setup Disk image was successfully updated.
10) Error: The virtual machine bus is not running.
11) Error: 'Virtual Machine Bus' driver required by the Virtual Machine Management service is not installed or is disabled. Check your settings or try reinstalling the Hyper-V role.
12) Error: 'Storage Virtualization Service Provider' driver required by the Virtual Machine Management service is not installed or is disabled. Check your settings or try reinstalling the Hyper-V role.
13) Error: The Virtual Machine Management Service failed to start the virtual machine 'Window8' because one of the Hyper-V components is not running (Virtual machine ID 2B393AF4-7B7E-4243-805B-23C09D20F4FB).
14) Error: 'Window8' failed to start. (Virtual machine ID 2B393AF4-7B7E-4243-805B-23C09D20F4FB)
Nick

Hyper V virtual machine randomly loses network connectivity

I have an extremely odd issue happening on one of my Hyper-V virtual machines. For no apparent reason and completely sporadically my virtual machine will lose all network connectivity. It is a linux Vyatta firewall image. Digging through
the logs shows nothing at all when the machine actually goes offline, but when the machine starts back up I just get a Warning stating the network driver on my virtual machine loaded but has a different version from the server. Server Version 3.2 Client
version 0.2
I've ran the integrated services setup disk and nothing has fixed this. When the VM loses connectivity it is for no apparent reason, sometimes at 1am sometimes at noon, just happens. The only solution is to reboot the VM to bring it back online.
Has anyone else seen this or know of a fix for it? Its starting to slowly drive me insane!
Hyper V Server - Windows Server 2008 R2 - Hyper V Manager Version 6.1.7601.17514
VM - Linux Vyatta Core 6.3

I tried downloading new integrated services disk setup for linux, but Vyatta wouldn't work with it so I was kind of stuck there. And not sure where you are talking about changing NIC to legacy at. I did disable some TCP chimpney settings as
per an article I found, but not sure if it will fix it or not. Sometimes the machine will stay on for a month before losing network connection and sometimes it comes in spurts and happens like 3-4 times over a couple days. Its really odd

Modify the headless options of the BIOS on a Hyper-V Virtual Machine

Hi everyone,
I am attempting to do something which is (surprisingly) complex using a Hyper-V virtual machine. Using VMware Workstation I have been able to boot from the network using VMware autodeploy. This loads ESXi 5.5 as the operating system. This
works great, but I would like to try to accomplish he same feat using Hyper-V, and I've succeeded. This creates is a nested ESXi 5.5 host.
The process was long and painful, but I have gotten to the point that I am able to successfully boot a Hyper-V virtual machine off the network (legacy network card as the boot device) then load the OS. The only problem is that in order to get it to
boot I need to hit shift + o during the ESXi boot startup, and enter the following line:
ignoreHeadless=TRUE
The problem is that I can't do this manually every time. To understand how to fix this, I first needed to understand what exactly "ignoreHeadless=TRUE" was doing. My understanding is that this has to do with the display, specifically:
"Some systems which have a video display device can be configured to report themselves as headless via the configuration, usually in the system BIOS."
I believe this is my issue, by default a Windows Hyper-V virtual machine reports itself as headless, therefore you need to ignore this configuration on startup or ESXi thinks there is a display error.
My question is, can I fix this from the virtual machine side? Can I modify the virtual machine so that it does NOT report itself as headless?

Hi,
The Hyper-V is the full virtualization technology, and it must installed on bare-metal computer, personal experience, if you are using the WDS with Hyper-V environment to
deploy the Windows system, the performance will lower than the physical computer and you must choose the corresponding method if you have the different environment.
More information:
Windows Deployment Services Overview
http://technet.microsoft.com/en-us/library/hh831764.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Hyper-v virtual machine management in status stopping

Hello,
I had a problem with one vm showing status backing up.
I read on TechNet that restarting the hyper-v virtual machine management service would solve the problem.
I have tried to shutdown the service but it now says status stopping...
How long time does it take to shutdown the service? Is there anything I can do to hurry it up?
ps. I have production vm running on the host that I can't take down...
Regards
Roger

Hi Roger,
I also tested in my lab to disable that service forcibly ,then I found that it will leads the VMs to unexpected shutdown .
Based on this ,it seems that restarting the host is necessary .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to connect USB external Harddisk to Hyper-v virtual machine

Hi,
We are running hyper-v server 2008 R2, we have external USB harddisk connected in hyper-v Manager, we are not able connect this USB to virtual machine.. is this option is available in hyper-v? if no is there any document from microsoft stating the same?
Regards
Asha

Hi,
Unfortunately, USB is not supported on a Hyper-V virtual machine. You can perform the following suggestions:
1. Offline the USB hard disk on the Hyper-V host machine and connect it to the virtual machine as a pass-through disk(if the USB hard disk is support)
For more information, you can refer to:
Configuring Pass-through Disks in Hyper-V
http://blogs.technet.com/b/askcore/archive/2008/10/24/configuring-pass-through-disks-in-hyper-v.aspx
2. You can also use some USB over Ethernet application.
Best Regards,
Vincent Hu

Hyper-V Virtual Machine manager

When using the Hyper-V Virtual Machine Manager and Connecting or Viewing using RDP is there any way to configure the app to span multiple monitor, (3) would be great

Hi Sir,
I'm afraid you need to use "mstsc.exe" to RDP to that VM instead of "vmconnect" in hyper-v manager .
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Cant create replica and Hyper V virtual machine management service slow shutting down

Hi,
I cant create replica and Hyper V, I go through the process and all looks good it even starts to create the hard disk but it stops at 4096K and the wizard just keeps going.
The management console is also slow or wont load virtual machines - stuck on loading virtual machines
The Hyper V virtual machine management service slow shutting down over 30 minutes on re boot of Hyper V core 2012 R2
Any ideas ?

Hi Sir,
I assume that you have a standalone hyper-v server 2012R2 and you are using hyper-v manager to manage the hyper-v host .
Which system you are using to manage hyper-v host , win8 or win8.1 or other ?
Have you created VMs on the HOST ?
I would suggest you to create vhd or someother operation on hyper-v host directly to check the result .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Hyper V Virtual Machine Creation

While we try creating a new virtual machine for our windows phone application, we are facing the following error.
-Failed to add device 'Virtual Hard disk
-Hyper V virtual machine management service account does not have permission to open attachment.
ERROR: General access denied error(0x80070005)

Unblock whatever it is that you downloaded.
Check that your antivirus software is set with the proper exclusions.
I don't recall anyone reporting this error before - as the installer for the phone emulator generally takes care of the machine creation and permissions.
I can only guess that you are attempting to duplicate the phone emulator VM. If so, use Export and Import.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

Hyper-V virtual machines disappearing

Running W10 Enterprise TP with no security software, nothing fancy.
Twice now my Virtual Machine running locally in Hyper-V Manger have disappeared after a reboot. They are still running in the background by their VHDs being in use, but I can't see them to do anything.
Last time this happened, I had to remove Hyper-V, reboot, re-add Hyper-V, and the VM appeared. However, there was something wrong with the VM so I deleted it and started over.
Any ideas?
My idea of a party is a virtualization server and a room of TechNet DVDs

@ThrashZone, Thank you but this is an issue that occurs after it has already been up and running.
@h_vHE I'm running Windows 10. Interesting: Everything has disappeared from C:\Users\Public\Documents\Hyper-V\. However, the virtual machine "IMAGEBASE" appears in C:\ProgramData\Microsoft\Windows\Hyper-V\. Here's a dir /b /s:
C:\ProgramData\Microsoft\Windows\Hyper-V\data.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Groups
C:\ProgramData\Microsoft\Windows\Hyper-V\Groups Cache
C:\ProgramData\Microsoft\Windows\Hyper-V\IMAGEBASE
C:\ProgramData\Microsoft\Windows\Hyper-V\Persistent Tasks
C:\ProgramData\Microsoft\Windows\Hyper-V\Planned Snapshots
C:\ProgramData\Microsoft\Windows\Hyper-V\Planned Snapshots Cache
C:\ProgramData\Microsoft\Windows\Hyper-V\Planned Virtual Machines
C:\ProgramData\Microsoft\Windows\Hyper-V\Planned Virtual Machines Cache
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types
C:\ProgramData\Microsoft\Windows\Hyper-V\Snapshot Groups
C:\ProgramData\Microsoft\Windows\Hyper-V\Snapshot Groups Cache
C:\ProgramData\Microsoft\Windows\Hyper-V\Snapshots
C:\ProgramData\Microsoft\Windows\Hyper-V\Snapshots Cache
C:\ProgramData\Microsoft\Windows\Hyper-V\UndoLog Configuration
C:\ProgramData\Microsoft\Windows\Hyper-V\UndoLog Configuration Cache
C:\ProgramData\Microsoft\Windows\Hyper-V\Virtual Machines
C:\ProgramData\Microsoft\Windows\Hyper-V\Virtual Machines Cache
C:\ProgramData\Microsoft\Windows\Hyper-V\Groups\groupregistry.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Groups Cache\groupregistry.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\IMAGEBASE\Virtual Hard Disks
C:\ProgramData\Microsoft\Windows\Hyper-V\IMAGEBASE\Virtual Machines
C:\ProgramData\Microsoft\Windows\Hyper-V\IMAGEBASE\Virtual Hard Disks\IMAGEBASE.vhdx
C:\ProgramData\Microsoft\Windows\Hyper-V\IMAGEBASE\Virtual Machines\DC334ED4-B8DF-4EFB-A6F0-10C508E7BA54
C:\ProgramData\Microsoft\Windows\Hyper-V\IMAGEBASE\Virtual Machines\DC334ED4-B8DF-4EFB-A6F0-10C508E7BA54.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\IMAGEBASE\Virtual Machines\DC334ED4-B8DF-4EFB-A6F0-10C508E7BA54.VMRS
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\06FF76FA-2D58-4BAF-9F8D-455773824F37.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\118C3BE5-0D31-4804-85F0-5C6074ABEA8F.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\146C56A0-3546-469B-9737-FCBCF82428F4.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\19839BFF-6F04-4B24-B4B5-1AFCCBE729DE.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\353B3BE8-310C-4CF4-839E-4E1B14616136.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\4764334E-E001-4176-82EE-5594EC9B530E.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\4EA4F71F-16E6-4250-99A8-A2315332CC64.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\6A45335D-4C3A-44B7-B61F-C9808BBDF8ED.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\70BB60D2-A9D3-46AA-B654-3DE53004B4F8.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\72027ECE-E44A-446E-AF2B-8D8C4B8A2279.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\78AA0C27-B2BD-45BA-83D1-5F2A8C4C6656.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\7951A5ED-8DC5-42D7-AA8C-9F14C54CEB84.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\B637F347-6A0E-4DEC-AF52-BD70CB80A21D.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\BDE5D4D6-E450-46D2-B925-976CA3E989B4.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\D45268DA-37C5-44DA-B827-B0C55CCB3BDC.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\D92D268E-9AA8-49DD-8C7D-821CEFB5F597.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\DACDCF3F-6F67-4EB8-A4D0-5D93B48A2468.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\ED28BF6C-B698-4513-B8F4-7BDD01E006A2.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\F6293891-F32F-4930-B2DB-1A8961D9CB75.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Snapshot Groups\groupregistry.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Snapshot Groups Cache\groupregistry.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Virtual Machines Cache\DC334ED4-B8DF-4EFB-A6F0-10C508E7BA54
C:\ProgramData\Microsoft\Windows\Hyper-V\Virtual Machines Cache\DC334ED4-B8DF-4EFB-A6F0-10C508E7BA54.vmcx
My idea of a party is a virtualization server and a room of TechNet DVDs

Hyper v virtual Machines should have installed integrated services or not ?

Similar Messages

Maybe you are looking for