Hyper-V VMs not showing at remote locations

My main headquarters is in Ohio. When I log into our Hyper-V host server, I can open the Hyper-V manager and see all of my virtual machines. The Ohio VLAN range is 192.168.120.***
When I remote desktop into our Georgia or Mexico Hyper-V host servers, I don't any VMs in the Hyper-V manager, but I can remote desktop to the individual VM itself.
Also, the D: on each of my hosts is showing empty, even though that's where the virtual disks are stored.
Please help!

Hi Crono7114,
Agree with others .
In addition , if the remote server installed ABE and the remote user has no permission to access folers in D: , it will dispaly nothing .
Please check that .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

My Iphone5 does not show the picture location after upgrading to ios 7.0.4 - why?

my Iphone5 does not show the picture location after upgrading to ios 7.0.4 - why?

I change Settings>Privacy>Location Services>Camera to OFF and then ON and the locations start to appear !!!!.
It seems to be Apple bug.
Thanks for you efforts

New iMovie app for iPhone 4 not showing up in Location Services (Settings)

iMovie app for iPhone 4 not showing up in Location Services (Settings). It apprently needs to be both viaible and turned on in Settings/General/Location Services in order for the app to discover previously taken video (Location Services correctly recognizes other apps of mine that utilize location-aware services).
I think the following is related to and caused by this problem above: iMovie App for iPhone 4 is not recognizing video clips I have made, whether they're in Photo Album, or iPhone 4 native movies that have been throughout this process: [sync with iPhoto on Mac > save to to iPhoto album > sync album to iPhone 4].

Just had this same problem. The solution is to turn Location Services on before launching iPhone iMovie.
Yes, iMovie needing GPS coordinates is crazy, as is the error message that doesn't correctly explain the problem. Looks like a bit of a rush job.

Windows 2012 + hyper-v + mouse not captured in remote desktop session + integrated services installed

windows 2012 + hyper-v + mouse not captured in remote desktop session + integrated services installed

Hi,
I am using Server 2012 R2 with Hyper-V and CentOS 6.5 that installed GNOME.
Same no mouse on remote desktop session or on the host's Hyper management interface.
From my knowledge, CentOS from 6.4 build in include the IS, how do I update the IS in CentOS 6.4-6.5 guest OS? Any detail docunment for reference?
Thank you.

Using Firefox 4.0 Beta 4. When I open a link in a new window, the web address does not show in the location bar. Why?

When I open a web page link in "a new window" the link opens, but the web page information does not appear in the location bar. It is blank. If I open the link in a new tab, there is ho problem.
Further, if a open a link from the tab without a location in a new tab on the same window and then go back to the original tab, the location bar fills with the web address.
Have done this starting in several locations, so it not location dependent.

That behaviour is likely top be caused by an add-on, and in your case the likely culprit is IE Tab 2, the various versions of IE Tab have caused problems with Firefox 4 beta including issues with the location bar not being updated.
You can test to see if IE Tab 2 is causing your problem by disabling it and then seeing if the location bar in a new window shows the address. If it is not that add-on causing the problem, see [[troubleshooting extensions and themes]].
For info, the IE Tab Plus add-on has been updated recently to improve compatibility with Firefox 4 beta, you may want to try that one instead. The latest version is available from http://coralietab.mozdev.org/installation.html

I have 16 gb wifi model brand new but Maps not showing my current location

My iPad is just 2 days old but I don't know what is going on my maps are not able to show my current location I don't
Know what's wrong with this please do suggest me some measures about what to do',and yea I already turned on my location in
Settings then also problem continue ,.,,, pls try to answer my querry

Hi,
I was facing the same issue with my Ipad - wifi.
I have found a simple solution for this but it needs you to have a iphone and period of one week.
if wifi router's mac address is not registered with apple's location services server, the location services on Ipad-wifi does not work, so we need to register wifi router's mac address to apple's server in first place.
If you have a iphone, then try to install 'Find my iphone' app. install it on your ipad also.
Initially when you login to this app with both iphone and ipad, only your Iphone will show location as it has GPS location. and your ipad location will not be reflected on this app.
If you continue to find your ipad using this app on you Iphone, and using your home wifi router, eventually after few days you would be able to track you ipad location, because your wifi router's mac address get registered on apple's server with its gps co-odridnates.
This has worked for my on 3 different wifi routers in last 8 months.
Hope this will hope you.

Lost iPhone 5, Battery Dead, Last Used 10hrs Ago, Not Showing Last Known Location?

I lost my iphone 5 and now the battery is dead. I last used it 10 hours ago, but iCloud is not showing it's "last known location" - it just says it's offline. iCloud is supposed to show it's last known location for 24 hours. How can I find it's last known location if I know it was used just 10 hours ago?

So, the conclusion of my story is: I immediately logged into iCloud from my computer as soon as I noticed it was missing. I put my phone into 'Lock Mode' which allowed me to apply a passcode and message on the screen instructing the finder to call my friend's #. 4 days later, my friend got a phone call - a guy who tried to restore and activate it for his own use discovered it was impossible without my newly applied passcode, and he decided to heed the message I had displayed. He claims he bought it for cheap off craigslist, but I think he found it, tried to activate it, couldn't, and felt guilty. The happy ending is he agreed to meet me and hand back over my phone. Unbelievable!
BUT - there is no reason why it should have not displayed the last known location when I initially checked online. My Find My iPhone was turned on, and it should have worked, but it didn't. It simply said it was offline even though it was well within the 24 hour time period of when I last had it in my possession. So fortunately, the LOCK MODE was enough to deter the would be new owner from going through with trying to sell, hack, or activate it.

How do you get rid of files which you downloaded but they will not show you their location?

I have downloaded a file from the internet and i can find it when i look under "mpg.download" but the finder will not actually show me the location of the file so I can manually remove it. I suspect it is a viral file which will cause some problems. How do you remove these type of files?

Look in your Downloads folder.

Hyper-V VM not showing up in Azure Site Recovery

Hello,
I'm trying to set up Azure Site Recovery as "On-Premise Hyper-V site to Azure" - so without VMM.
So far I've followed the steps from here: https://msdn.microsoft.com/en-us/library/azure/dn879142.aspx up
to Step 5. That's where I'm stuck.
Wen trying to set up protection for my VMs Azure is not recognizing my on premise VMs although there is one running on my Hypervisor: http://i.imgur.com/h8TnV46.png
The Hypervisor got recognized within the Hyper-V site and the Recovery Services Agent and Site Recovery Service are running on my Hypervisor.
The Hypervisor's event log (Microsoft -> Azure Site Recovery -> Provider -> Operational) shows that replication is triggered every 15 minutes as configured in Azure but no changes are commited to Azure.
My Hypervisor is a freshly installed Windows 2012 R2. Not domain joined, no proxies. Firewall disabled.

Hi,
Check for FAQ on Azure site recovery for Hyper-V and other VM's
http://social.technet.microsoft.com/wiki/contents/articles/21619.microsoft-azure-site-recovery-common-error-scenarios-and-resolutions.aspx
Girish Prajwal

Reminders not showing up in Location Services

My Reminders App is does not appear in Settings under Location Services and thus does not offer reminders when I arrive or leave a location. Shouldn't Reminders have automatically appeared as an app under location services when I activated the phone? Any solution on how to get it to show up so I can turn on location services for Reminders and thus get the app working correctly?

Another way to fix this without disabling Exchange reminders is to change the iPhone default calendar to a calendar other than the Exchange calendar. E.g. your iCloud calendar.
This also allows you to use location-based Reminders again, because new Reminders get created in the iCloud calendar instead of the Exchange calendar.
This does however mean that any new Calendar item (meeting etc.) created on the phone will by default be created in the iCloud calendar too unless you manually pick your Exchange calendar when creating a new Calendar item.
Some may find this annoying and prefer to stick to the simple solution of switching off Reminders. Note that this still means that all new reminders will be created locally on the iphone, or on icloud if you have an icloud account set up. Reminders will never show up for example in MS Outlook any more. The way around this would be to install Apple's iCloud application on your desktop and choose to display iCloud reminders in Outlook. This way you would then see your iCloud reminders from your iPhone in Outlook again! Phew.. what a workaround

IPhoto Places map home button does not show all photo locations in one extent

I recently started populating location information for my photos in iPhoto 2011. Some are pre-loaded from my iPhone, but I also manually added locations for other photos/events. Now I have locations assigned both in the U.S. and in Europe, but when I try to view them all in one extent (via the "home" location button on the Places map), the map centers on Europe and I can't even see the U.S. Did I accidentally change a setting for the "home" location on the map? I cannot find a menu that shows options for the "home" location. Is it possible that locations are too far away from each other to see them all at once? If so, is there a way to reset the center of the map so I don't have to pan over from Europe every time I want to look at the U.S. locations (which is 99% of the time)?
Thanks in advance for the help.

I think I figured it out.
It appears that the iPhoto Places map centers on the extent with the greatest number of individually geo-tagged photos. Rather than centering the map to the area in the middle of all your locations (i.e. one location, one "point"), it actually prioritizes locations by how many individually tagged photos are at that location (i.e. one location, many potential "points").
Secondarily it may be a screen size issue. When I falsely tag a bunch of photos in Hawaii, then I can only see HI and mainland U.S. (no Asia or Europe).
I guess Apple assumes you'll want to see most where you have the most tagged photos. This is unfortunate, however, as I tend to tag overseas locations by the entire Event (many photos placed at one location) vs my domestic photos which may or may not have locations. I guess it'll even out over time, but still, it would be nice to be able to set a specific "home" location or viewing extent.

FF does not open in remote locations while Explorer opens . Each time a Firefox Browser upgrade window popsup but is not operative, only removed it by reload. Popups blocked

FF will not open when using WiFi remote, Explorer opens easily.FF starts with a pop-up window for a Browser Upgrade but is not operative and only removed by using the reload.

FF will not open when using WiFi remote, Explorer opens easily.FF starts with a pop-up window for a Browser Upgrade but is not operative and only removed by using the reload.

Reminders will not show up under location services

I'm trying to set a reminder when I'm at a location.
BUT - I go to Privacy -> Location Services -> and the Reminders Ap doesn't even appear in the list. (see picture)
I have tried to reset the Location Services by turning off and back on. Also by turning it off and restarting my phone.

- First place the iPod in recovery mode and then try to restore the iPod via iTunes. For recoverymode see:
iPhone and iPod touch: Unable to update or restore
- If iTunes does nt see the iPod, start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

Stock is not showing in storage location after MIGo

I am not able to see the stock in storage location after MIGO. Please help me where Iam wrong.

Hi Deepak,
while GR , which movement type it should ?
check document for that GR , is it created?
check your stock may be at inspection storage location
Thanks
Bala

DBCA does not show the remote nodes on a RAC 10.2.0.2 HP-ITANIUM

HI at all,
I have a problem and I hope someone can help me.
A collegue have installed CRS and the Oracle HOME for a RAC 10.2.0.2 on a HP-ITANIUM ( two nodes) .
Im'm using the dbca for creating a cluster database.
I can see the RAC option pages , but in the "select nodes page" I found only the local node and not the remote node.
Any suggestion is appreciated
thank you
Adriano
$ crs_stat
NAME=ora.itmicz50.LISTENER_ITMICZ50.lsnr
TYPE=application
TARGET=ONLINE
STATE=ONLINE on itmicz50
NAME=ora.itmicz50.gsd
TYPE=application
TARGET=ONLINE
STATE=ONLINE on itmicz50
NAME=ora.itmicz50.ons
TYPE=application
TARGET=ONLINE
STATE=ONLINE on itmicz50
NAME=ora.itmicz50.vip
TYPE=application
TARGET=ONLINE
STATE=ONLINE on itmicz50
NAME=ora.itmicz51.LISTENER_ITMICZ51.lsnr
TYPE=application
TARGET=ONLINE
STATE=ONLINE on itmicz51
NAME=ora.itmicz51.gsd
TYPE=application
TARGET=ONLINE
STATE=ONLINE on itmicz51
NAME=ora.itmicz51.ons
TYPE=application
TARGET=ONLINE
STATE=ONLINE on itmicz51
NAME=ora.itmicz51.vip
TYPE=application
TARGET=ONLINE
STATE=ONLINE on itmicz51
and the olsnodes command :
$ olsnodes
itmicz50
itmicz51
Message was edited by:
user549224
null

HI Chandra,
thank you very much for your reply. I suppose the oraInventory is the same, however the contents of inventory.xml file is this:
<?xml version="1.0" standalone="yes" ?>


<INVENTORY>
<VERSION_INFO>
<SAVED_WITH>10.2.0.1.0</SAVED_WITH>
<MINIMUM_VER>2.1.0.6.0</MINIMUM_VER>
</VERSION_INFO>
<HOME_LIST>
<HOME NAME="OUIHome1" LOC="/work/app/oracle/product/CRS" TYPE="O" IDX="1" CRS="true">
<NODE_LIST>
<NODE NAME="itmicz50"/>
<NODE NAME="itmicz51"/>
</NODE_LIST>
</HOME>
<HOME NAME="OUIHome2" LOC="/work/app/oracle/product/RAC10g" TYPE="O" IDX="2">
<NODE_LIST>
<NODE NAME="itmicz50"/> <===== EVIDENCE
</NODE_LIST>
</HOME>
</HOME_LIST>
</INVENTORY>
I can see that within the node_list tag I have only one hostname It is correct?
thank you in advance
Adriano Capruzzi

Hyper-V VMs not showing at remote locations

Similar Messages

Maybe you are looking for