Hyper-V WMI Provider - Searching and Setting Port Mirroring

Is there any way to search for VMs with Port Mirroring disabled through WMI provider?? I'm working on a little application to set port mirroring to destination but I can't find anything in WMI Provider API. I know this can be achieved using PowerShell
cmdlets but I would rather use WMI and C# if possible. Thanks.

Hi PerlFanatic ,
Please refer to following command :
Get-WmiObject -Namespace root\virtualization\v2 -Class msvm_ethernetswitchportsecuritysetting
data
Best Regards
Elton JI
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Why do we need get and set methods?

It is considered good design practice to keep all class data private and
provide get and set methods for accessing the data in a controlled
manner.
So, instead of directly accessing the class data, you use getter and setters.
I do not really feel the need to use get and set methods.
How does that achieve encapsulation when ultimately the class data is being exposed?

A couple of reasons why to use get and set:
1. For example you can set an int value for month, if a user sets this to somting
higher than 12 (or 11 if it's zero based) you want to handle that by either
throwing an exception or adding a year for every time it can be devided by 12.
If you dont do it in set you'll have a whole bunch of methods that might need to
correct the value before retreiving the eventual date.
2. If for some reason you have security set up for certain values you can
implement this in the get method. When this is done somewhere else you have
a whole bunch of methods retreiving the info in other classes that need to check
first. (a canGet method could allso be used). Another good reason to use get
is when the information needs to be converted depending on the consumer
calling the get method.
3. If any logic in 1 or 2 changes you'll have a bunch of code to change.
If you feel there is no need to implement any security, error handling (on
compiling because get and set might throw something) or validation when
setting/getting these values there is still the argument of readabillity.
Eclipse has a feature that will generate getters and setters for you so it's not
like there is a lot of extra typing involved.
Got interupted whyle typig so sorry to repeat any answer given before.

WMI Provider Host

Hello!
I was wondering if there is any way to cut down the CPU usage of wmi provider host?

Hi,
Before going further, I want to confirm with you how much CPU usage the WMI Provider Host occupied on our machine. If the CPU usage seems abnormal,
we need to check whether this is related to some third party program
causing the WMI service to spike the usage of CPU.
The following threads are all about high CPU usage related to WMI Provider Host, and can be referred to as reference.
WMI Provider Host
http://social.technet.microsoft.com/Forums/en-US/b3ae538c-35cc-4669-be85-b09724ff1015/wmi-provider-host?forum=winserverManagement
WMI Provider Host constantly disrupting performance of my CPU, especially when music is playing.
http://answers.microsoft.com/en-us/windows/forum/windows_8-performance/wmi-provider-host-constantly-disrupting/8e1ead34-d25f-4ee5-8eb1-7a6afe3c0696
WMI Usage running at 60% Spiking to 100%
http://www.windowsbbs.com/windows-8/105406-wmi-usage-running-60-spiking-100-a.html
Please Note:Since
the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Best regards,
Frank Shen

Sg 300-28 port mirroring

Hello,
I have problem with device SG 300-28. When I try to set port mirroring I get following message: “Lock port Dynamic Enable prevents executing Copy Port Enable”. This message is displayed as in web-interface, as in lcli mode. This is output from the console:
SW(config)#int gi16
SW(config-if)#port monitor gi15
Port gi16: Lock port Dynamic Enable prevents executing Copy Port Enable
Both ports are in the same VLAN (if it matters). Which command prevents executing “port monitor” ?
Thanks in advance.

Gabriel,
You're getting this error because port security is enabled on the port you are trying to mirror. Once you unlock this port and make sure your destination port is vlan 1 then you shouldn't have any problems setting up mirroring.
hope this helps,
Jasbryan

TS3899 I can receive, but not send emails on iPad. All settings checked several times and with internet provider. imap settings confirmed as ok. Account deleted and set up under guidance of service provider several times - problem not solved - help!!

I can receive, but not send emails on iPad. All settings checked several times and with internet provider. imap settings confirmed as ok. Account deleted and set up under guidance of service provider several times - problem not solved - help!!

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Using a POP account with multiple devices
http://support.apple.com/kb/ht3228
iOS: Adding an email account
http://support.apple.com/kb/HT4810
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694
iPhone, iPad, iPod touch: Microsoft Outlook 2003, Outlook 2007, Outlook 2010 may not display contacts and calendars after sync
http://support.apple.com/kb/TS1944
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
How to Sync Contacts with Your iPad Using iTunes
http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iCloud: Create a group and add contacts to it
http://support.apple.com/kb/PH2667
eMail Groups - You can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

Report service Integration (sql 2012 and SharePoint 2013) error Report Server WMI Provider error: Invalid namespace

Report Server WMI Provider Error: Invalid namespace
Domain Server, Sql2012 server and SP2013 Server (3 vm servers)
the sql server reporting services service application and applications Proxy are installed and started (SP2013 Sever)
the sql server PowerPivot system Service and SQL server Reporting Services Service are Started (in Services on Server)
in sql server 2012 sp1 reporting service configured (web service URL and Report Manager URL are configured and tested, the database report server mode is native) (SQl 2012 Server)
under general Application Settings .. trying to setup the "Reporting Service Integration" give us the above error message (Report Server WMI Provider Error: Invalid namespace)
I was looking for all blogs and TechNet material but without success.

Follow these steps:
1) Uninstall SSRS from the Database Engine server (MSSQLSERVER instance).
2) Install SSRS on the SharePoint server using the "Reporting Services - SharePoint" install option during SQL Feature selection, no other services are required (e.g. you do not need to install Database Engine services).
3) You should then see SSRS as a Service Instance in Central Admin -> Manage Services on Server, at which point you can also create an SSRS Service Application.
While this guide (http://msdn.microsoft.com/en-us/library/jj219068.aspx#bkmk_install_SSRS) walks you through it, this is for a single server install where the Database Engine is also installed on SharePoint, not something you want to do.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Search Hijack. My search has been hijacked by Yahoo. My search is set up for Google, and when I type in the bar is say google.co.uk, but a yahoo page still comes up.

My search is set up correctly for Google, when I type a search "google.co.uk" is there in blue, but still a Yahoo search comes up on the web page.
Help to stop this would be greatly appreciated.

From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.

Two Xserves running 10.5 Server and setting up DNS...

Hello.
I have two Xserves (a G5 and a new Intel), both with fresh installs of 10.5 Server on them.
Xserve #1 not going to be hosting any external services (FTP, web, email) and only housing internal, mission critical & confidential data (the server is set up with a mirror RAID on the OS drive as well as mirror RAID on the storage drives + nightly tape backups for offsite storage). Right now there are no plans for enabling iCal on this server as we're trying to keep the server as basic as possible (as we can afford zero downtime on this server), but if the initial setup of 10.5 requires configuration at first run to allow this type of thing, I'd like to deal with it now so as to keep my options open (as I know iCal on 10.5 requires Open Directory enabled).
Xserve #2 is going to host FTP (for external clients) and internal file sharing for the design/production department (basically, for transferring files back and fourth between departments, so no data via this share will be "critical" as it's only temporarily on the server and will always exist in other locations). Even though this server will not host "critical" data, it will share the same backup/RAID scheme as Xserve #1.
So, I'm curious as to how I set up DNS in this situation (so we can associate a domain name to our static IP address). We already have our main domain setup via 3rd-party hosting service (for web & email as we do not want to bring these services in-house), but we're purchasing a second domain that will be associated with company (via a static IP, so we can give a domain name instead of IP address for people needing to connect to the FTP server, make it easier for employees to remember the address for remote connections, etc.).
Because Xserve #2 is going to be hosting FTP, would it make sense to setup DNS on this server and not set it up on Xserve #1? Also, and this could just be me being paranoid, but because Xserve #1 will be housing "critical & confidential" data I want to eliminate as much contact with the outside world as possible with this server, so this is another reason I feel Xserve #2 should have DNS running instead.
Oh, and not sure if this makes any difference, but between the WAN and the LAN is a SonicWALL firewall and currently it deal with port forwarding, etc. depending on what services are being requested from the WAN (ie. remote machine connections, FileMaker remote connections, etc.).
Any advice would be appreciated!
Regards,
Kristin.

There's a couple of things in your post I don't understand:
the server is set up with a mirror RAID on the OS drive as well as mirror RAID on the storage drives
How are you doing this? Both XServes support only three internal drives and two mirrors require 4 drives. Where does the fourth drive come into play?
I'm curious as to how I set up DNS in this situation
There are numerous ways of doing this, but with a single static IP address your best bet is to leave DNS where it is - managed by your hosting provider. Just add a record in the domain zone (e.g. ftp.yourdomain.com) that has the IP address of the public interface your SonicWall firewall. You don't need a separate domain for this. You also don't need to setup internal DNS for this (although you may need internal DNS if you're running Open Directory.
Because Xserve #2 is going to be hosting FTP, would it make sense to setup DNS on this server and not set it up on Xserve #1?
Assuming you're referring to setting up a DNS server - use them BOTH. Make one of the servers the primary server (I'd pick the internal-only server for this) and set the other server to be a slave (so it copies all the zone data from the primary server). That way you have a replica of the data to provide additional resilience.

Change "Bing" from the defalt search engine setting 2. How can I have snipping tool on taskbar

Can you please tell me how I can change Bing as the default search engine setting on my browser? I have checked the internet option and account setting. It doesn't seem it can be done.

Refer this :
http://windows.microsoft.com/en-in/windows/change-choose-internet-explorer-search-provider#1TC=windows-7
For snipping tool :
When you open the tool, on task-bar, right click and click on Pin the program on Task bar.
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Airport Express (Model with 802.11G +54MBPS Mac/PC and Set Up Issues

Hi,
We have a 4 Mac and 1 PC Household. Cable Internet Service by Roadrunner.Cable model (owned) connected to a D-Link 802.11G wi fi router (by ethernet from cable modem)in the family room , then out to a Imac (the half moon base and LCD screen with a airport card also in the family room and the closet computer to the D-Link
router, (we did add a D-Link antenna to the router ? about 10 months ago (a D-Link ANT24-0700 (Version 1.2)and a HP 4 in 1 printer attached via USB to the Imac
,a eMac 1.25 ghz 1Gb ram with airpot card also connected wirelessly (no printer attached on the same floor but in a ajoinging room about 20 feet from the Router, and another eMac 1.0 Ghz 1Gb ram with airport card in the upstairs part of our house (a bedroom) and no issue with Internet connection (it has a Epson 3in 1 printer attached via USB, and a MacBook Pro with 802.11N wireless card in side , bought for a Christmas/Birthday Present and also for college.It to has no issues with the Internet where ever it may be in the house. Our sole PC a HP tower with a added D-Link WDA -2320 Range Booster Desktop Adapter (802.11G) and we added a D-Link Antenna same model as the other a ANT24-0700 to help with Internet access which it did as well as adding some ram to increase page loading time etc. It does not have a printer attached. I will get to the Topic Area now
The Airport Express. I was not involved in the set-up as I was laid up due to a bad back and post major knee surgery , But I always (especially recently) wondered why the light was amber and blinking. I read through the manual and also
Apple.com support and MacFixit.com (which is under construction and moved to part of Cnet.com)and then went to the Airport Express Discussion area (sorry for being so wordy) I need a Twitter account to post!) We have a network name for the D-Link and the computers all were added and it also supports a Xbox 360, a Sony PlayStation 3 and a Nintendo Wi (in online use without issue) but..
A network was also as it appears to myself) for the Airport Express and under the half moon bars showing connection strenght (there is our D-Link network "phoenix" with security protection WPA2 I believe) as I have set up the router, We had a Apple Base station prior that was ? 802.11B (a half moon white unit) still have it in the box ) So for normal daily use, checking e-mail and internet use all of the computers use the "phoenix" or D-Link supported Router 802.11G
and The other network calld Apple Network with numbers and letters after it (and hopefully security) password is unknown , The Airport Express is set up connected via USB to a HP B&W laser printer which has saved quite a bit of money on ink, To utilize that printer you must switch from "phoenix" The D-Link router network to the Apple Network (followed by letters and numbers) The Imac and the eMac in the family room and a ajoing room (after switching to the Apple Network
can than print to the lasr printer. The eMac upstairs and the HP Windows XP Professional software can not print to the laser printer (yet the HP PC shows it as a individual network and a strong signal, equal to the Internet connection from the D-Link, and the eMac (after switching under the half moon (not the proper name I am sure) to get to the Apple Network to print , it will not print, yet it shows a 5 bar signal, same as the D-Link connection. I do believe we have two seperate networks (but do not understand why the two Mac's in the family room can print to the laser printer by simply switching networks and then file and print. ** One other 9probaly major item is that it states to set up the Airport Express with a Mac With OSX 10.4 or later (at the time of set up, we had the Imac and two eMac's all running Panther OSX 10.3.9 9which they continue to have installed) We obtained the HP Tower and Monitor and HP 4in 1 printer ust before Christmas in 2008 and the MacBook Pro in Mid December 2009 (current model and running Snow Leopard 10.6. The HP Tower runs Windows Xp Professional (Service Pack 3) so the MacBook Pro which is much more mobile , could be used to do the set-up, or the HP Tower coulf be moved temprarily, I do recall if Router changes (at least with The D-Link You need to be connected by Ethernet to the Mac
that would be doing the set up/configuration of the router (and it runs OSX 10.3.9 and is a older Mac (with 80Gb Hard drive that is partioned for OS9 and OSX as well , it is under a Ghz processor wise and less than 1 Gb of ram as the last ram slot required a seal to be broken and 256mb of ram (?) could be added
it has 768 mb of ram but knock on wood running well. We use Lacie external drives
on the Imac and both eMac's and need to get external drives for the HP PC as well as the Mac Book Pro (15" screen)
I apoogize if I repeated myself, and rambled but I wanted to (in one post) to explain our set up and network configuration
Questions
1) if indeed it is that the two networks is true and a set yp that is not correct
can the Airport Express be configured without opening up the router (when ever that happens it seems one computer is unable to get online and each time its a differnt one a Mac or veen the PC
The PC under My Computer and Networks clearly shows the wto distinct and seperate netwoks with strong signals and the distance is not far (it is through a floor as the other emac and the PC are upstairs and cabling by ethernet is not a option
2) If I need to open the router would I add the Airport Express as a client as if it was one of the computers or gaming systems on the network? (adding the Mac adress or IP address (not sure how you find the Mac address) and its been while since the router was opened up for any additions or work on it.
3) would it be on the same channel as the router or not ?
4) Hopefully with proper configuration the light will stay on (and green) on the A/E and the eMac and HP PC will be able to print to the laser printer. Currentlt
when anything needs printed from the PC its put on a Flasg Drive and plugged in tothe Imac and the the Apple Network is selected and data printed, The eMac upstairs has the option of using the attached Epson 3 in one or doing the Flash stick work around.
I would be verya appreciative if some one took a look at the set up above and advised me of what is right, what is not right* and what to do to fix things up
I would imagine after proper set up, delete the Apple Network from the PC and eMac upstairs and ? all of the computers as we should have one base station (the D-link and the spoke (the A/E connected by UBS to the A/E (it may be ethernet but the cable connection from the A/E to the HP laser printer is correct (the rest of the A/E set up ... Please , tell me where it is and where it should be
and ? any idea why we can print to the laser printer down stairs and not up stairs ? it did mention printer set up with Panther as possible, page 43 of themanual we have un chaper 5 Tips and Troubleshooting (under whn your printer isn't responding) (we do not have the interfereance listed in the manual,
our phones are land line, one 900 mghz and the others 5.8 ghz
It is possible to move the A/E and laser printer if that would help the two computers (desktops) upstairs) bt the distance is way less than 150 but their is a floor and ? duct work (metal ) but I think here is a place to stop typing and let some of the experts on the discussion forums take a look.
one lst note (as the lap top will be going off to college in the fall (runnning Snow Leopard, and the other 3 Mac's run Panther OSX 10.3.9 should the HP PC windows Xp Professional be the computer to set up the air port express and the Airport Utility proram installed & would this conflict with the current Router (set up by a Macc running OSX 10.3.9 (Panther) i.e (should both set ups be on the same computer?) but actually aThe D-Link is OSX10.3.9 compatible (and 802.11G) and set up requires ethernet connection to a Mac (You type in the numbers and . etc and password as administror and you are in, or should the admin be on the same cpmpuer for the router and A/E ?
(and considering a Airport Extreme Base Station as well as dual frequency simulataneus and 802.11N (for the laptop now) and future, or wait. The 802.11
in theory would broadcast farther..?? even if computers had 802.11b(our Mac Desk tops and the PC 802.11B card
Thanks Again!!!
Many, Many Thanks
amnienttales

William Boyd Jr.
Hello again,
D-Link Router is model DGL-4300 (along with a D-Link ANT24-0700 Omnidirectional
7dbi Antenna . Our Cable Internet ISP (Roadrunner) provides consumers with dynamic ISP address's . All Mac's have Airport Cards and The Hp Tower XW4550 has a D-Link Rangebooster G Desktop Adapter WDA-2320 (also with a D-Link ANT24-0700 Omnidirectional 7 dbi Antenna (the PC OS is Win XP Pro Service Pack 3) The 3 desktop Mac's run OSX Panther 10.3.9 , The 15" MacBook Pro OS is OSX 10.6 Snow
Leopard (not sure what is after the .6 (right now) D-Link's website is
http://www.dlink.com , I have configured this router multiple times in the past.
also added as clients on the network (Utilizing the D-Link Router) are a X-Box 360, Sony Play Station PS3, and a Nintendo Wii all of which have on line ability
and enables online video game play with any one online.
As mentioned prior the Airport Port Express is Model A1084 Part No. M9447OLL/A
which is USB conected to a HP LaseJet B&W , model 1020 and some how the two computers near it can switch to the Airport Express Network from the D-Link Router based Network and print wirelessly to the A/E connected LaserJetPrinter
I realize I will need to reconfigure the D-Link Router and add the A/E as a client. I will try first to use the Airport Utility and see if I can do anything
Utilizing it (adding it to the D-Link network, I think its unlikely but worth a try but* the password is unknown but I have a few guess's as to what it may be.
I do have the necessary admin and network paswwords to cconfigure the D-Link Router,
1) * If the the A/E Utility experiment fails and I need to re-configure the router * do I need to (as per the Airport Express Set Up Guide (Use a Mac with OSX 10.4 or later or a PC with Win Xp Home or Professional (have a desk top PC that has the specs) and The Mac Book Pro meets the Mac Spec's)
If I can not get a password to work on the A/E I would reset it using the reset button
And before plugging in the A/E , connect the appropraite cables in our case a USB cable to the LaserJet Printer then plug in the A/E
2) I would then connect by Ethernet from Either the Mac Laptop or The PC to the D-Link router (if not the router will not set-up correctly)
3) The one question that puzzles me is that we are not using the A/E as a base
but a client
in two sections(Using Airport Express , connecting a Printer via USB
and use Airprt Utility to create a new network or join a new newWireless computers using Mac OSX 10.2.7 (Tiger) or later or a PC with Windows XP and it then goes in to the steps of ising the printer for both a Mac and a PC (using Bonjour on the CD that came with the A/E (this appears to contradict needing to use Mac OSx 10.4 or a PC with Win Xp set the A/E up for use as a printer
(joiing a new network or existig one)
And in Chapter 5 Tips and Roubleshooting= Your Airport Express Status Light Flashes amber & Your Printer is not responding (it is flashing amber and the printer does not respond to the two computers upsstairs (one Mac running OSX 10.3.9 & One PC running WinXp and its states to make sure the printer is selected
in the Printer list o client computers, to do this on a Mac using OSX 10.3 or later , open Printer Set Up Utility and follow steps and if a PC with Windows XP , Open Printers and faxes and then follow steps
in Closing ? can I configure the A/E Utility with a Mac using 10.3.9 as above or
? Per Chapter 1 Getting Started use a Mac with OSX 10.4 or later or a PC with Windows Xp Home or Professional
Perhaps I am taking the tips and trouble shooting and Printer Set up out of context or does the getting Started Computer specs contradict them or are they
for use if the A/E was going to be a Base Station and not a client..
Will keep at it,
ambienttales

Search and replace data in excel using a text file

Hi Scripting Guy:
I was able to write a script based on all the examples in your blogs, but now I'm stuck:
I have a text file, which has Server Name, IP Address, Comments
ABCserver1, 1.1.1.1, remote web server
DEFserver2, 2.2.2.2, remote app server
XYZserver3, 3.3.3.3, remote api server
I have a excel file which has Server Name, IP Address, Protocol, Port. Server Name, and IP Addreess can repeat itself more than once in entire spreadsheet at any location:
Server1, x.x.x.x, TCP, 80
Server2, x.x.x.x, TCP, 80
Server3, x.x.x.x, TCP, 80
My script search for the excel spreadsheet for a array that I have defined [Server1,Server2,Server3,...], once the first value matches in spreadsheet it replaces all values of Server1 with first value in text file i.e: ABCServer1 so my new excel sheet looks
this:
ABCserver1, x.x.x.x, TCP, 80
DEFserver2, x.x.x.x, TCP, 80
XYZserver3, x.x.x.x, TCP, 80
What I also want is, when I replaces the "Server1" value in spreadsheet, it will also replace the IP Address in next column. This is where I'm stuck I can replace the value of Server Name, but I can't replace the IP address for text file. Remember
"Server1" can be found at any place in spreadsheet but it will always have IP address column next to it.
So this is what script will do if runs correctly:
1) Read text file:
ABCserver1, 1.1.1.1, remote web server
DEFserver2, 2.2.2.2, remote app server
XYZserver3, 3.3.3.3, remote api server
2) Before script run on excel sheet
Server1, x.x.x.x, TCP, 80
Server2, x.x.x.x, TCP, 80
Server3, x.x.x.x, TCP, 80
3) After script run on excel sheet
ABCserver1, 1.1.1.1, TCP, 80
DEFserver2, 2.2.2.2, TCP, 80
XYZserver3, 3.3.3.3, TCP, 80
If you will see my script is able to replace "Server Name" in entire spreadsheet, but can't copy or replace the corespondent IP address in next column.
script:
$text = "Server1","Server2","Server3"
$replace=$replace = get-content C:\script\test.txt | foreach{ ($_.split(","))[0]}
$File = "C:\script\test.xlsx"
$now = [datetime]::now.ToString("yyyy-MM-dd")
#$now = get-date -Format "MM-dd-yyyy_hh:mm:ss"
copy-Item C:\script\test.xlsx test_$now.xlsx
# Setup Excel, open $File and set the the first worksheet
$i=0
$Excel = New-Object -ComObject Excel.Application
$Excel.visible = $true
$Workbook = $Excel.workbooks.open($file)
$Worksheets = $Workbooks.worksheets
$Worksheet = $Workbook.Worksheets.Item(1)
$Range = $Worksheet.UsedRange
Foreach($SearchString in $text){
if ($Range.find("$SearchString")) {
$Range.replace($SearchString,$replace[$i])
else {$i++}
$WorkBook.Save()
$WorkBook.Close()
[void]$excel.quit()
Really appreciate your help
Thanks

Hey, thanks for helping me out. I checked online and I had to call Cells this way:
$Workbook.Worksheets.Item(1).Cells.item($cell.Row,$cell.Column+1)=$test[$i].replace
one problem I'm having is if the $server value repeats itself in excel sheet again it doesn't replace all values for lets see server 1:
so thats how my excel sheet is:
server1
x
TCP
80
server2
x
TCP
80
server3
x
TCP
80
server1
x
TCP
80
when I run the script thats how results looks:
server1
x
TCP
80
REM88888SQL301A
10.1.1.2
TCP
80
REM88888SQL301B
10.1.1.3
TCP
80
REM88888SQL301
10.1.1.1
TCP
80
It skipped the line one on excel and changed value in line 4. As I mentioned above this can repeat $server can repeat itself anywhere in spreadsheet in multiple columns.
What can we do so it will replace all server name and IP address?
Thanks

File Server - File size\type search and save results to file

I already have a vb script to do what I want on our file server, but it is very inefficient and slow. I was thinking that a powershell script may be more suitable now but I don't know anything about scripting in PS. So far the vb code that I
have works, and I am not the one who wrote it but I can manipulate it to do what I want it to. The only problem is, when I scan the shared network locations it stops on some files that are password protected and I don't know how to get around it. If
someone else knows of a PS script to go through the file system and get all files of a certain type or size (right now, preferably size) and save the file name, size, path, owner and dates created\modified please point me to it and I can work with that. If
not, could I get some help with the current script that I have to somehow get around the password protected files? They belong in a users' HOME directory so I can't do anything with them. Here is my code:
'Script for scanning file folders for certain types of files and those of a certain size of larger'
'Note: Script must be placed locally on whichever machine the script is running on'
'***********VARIABLES FOR USE IN SCRIPT***********'
'objStartFolder - notes the location of the folder you wish to begin your scan in'
objStartFolder = "\\FileServer\DriveLetter\SharedFolder"
'excelFileName - notes the location where you want the output spreadsheet to be saved to'
excelFileName = "c:\temp\Results_Shared.xls"
'**********END OF VARIABLES**********'
Set objFSO = CreateObject("Scripting.FileSystemObject")
fileName = objFSO.GetFileName(path)
'beginning row and column for actual data (not headers)'
excelRow = 3
excelCol = 1
'Create Excel Spreadsheet'
Set objExcel = CreateObject("Excel.Application")
Set objWorkbook = objExcel.Workbooks.Add()
CreateExcelHeaders()
'Loop to go through original folder'
Set objFolder = objFSO.GetFolder(objStartFolder)
Set colFiles = objFolder.Files
For Each objFile in colFiles
Call Output(excelRow) 'If a subfolder is met, output procedure recursively called'
Next
ShowSubfolders objFSO.GetFolder(objStartFolder)
'Autofit the spreadsheet columns'
ExcelAutofit()
'Save Spreadsheet'
objWorkbook.SaveAs(excelFileName)
objExcel.Quit
'*****END OF MAIN SCRIPT*****'
'*****BEGIN PROCEDURES*****'
Sub ShowSubFolders(Folder)
'Loop to go through each subfolder'
For Each Subfolder in Folder.SubFolders
Set objFolder = objFSO.GetFolder(Subfolder.Path)
Set colFiles = objFolder.Files
For Each objFile in colFiles
Call Output(excelRow)
Next
ShowSubFolders Subfolder
Next
End Sub
Sub Output(excelRow)
'convert filesize to readable format (MB)'
fileSize = objFile.Size/1048576
fileSize = FormatNumber(fileSize, 2)
'list of file extensions currently automatically included in spreadsheet report:'
'.wav, .mp3, .mpeg, .avi, .aac, .m4a, .m4p, .mov, .qt, .qtm'
If fileSize > 100 then'OR objFile.Type="Movie Clip" OR objFile.Type="MP3 Format Sound" _ '
'OR objFile.Type="MOV File" OR objFile.Type="M4P File" _'
'OR objFile.Type="M4A File" OR objFile.Type="Video Clip" _'
'OR objFile.Type="AAC File" OR objFile.Type="Wave Sound" _'
'OR objFile.Type="QT File" OR objFile.Type="QTM File"'
'export data to Excel'
objExcel.Visible = True
objExcel.Cells(excelRow,1).Value = objFile.Name
objExcel.Cells(excelRow,2).Value = objFile.Type
objExcel.Cells(excelRow,3).Value = fileSize & " MB"
objExcel.Cells(excelRow,4).Value = FindOwner(objFile.Path)
objExcel.Cells(excelRow,5).Value = objFile.Path
objExcel.Cells(excelRow,6).Value = objFile.DateCreated
objExcel.Cells(excelRow,7).Value = objFile.DateLastAccessed
excelRow = excelRow + 1 'Used to move active cell for data input'
end if
End Sub
'Procedure used to find the owner of a file'
Function FindOwner(FName)
On Error Resume Next
strComputer = "."
Set objWMIService = GetObject("winmgmts:" _
& "{impersonationLevel=impersonate}!\\" & strComputer & "\root\cimv2")
Set colItems = objWMIService.ExecQuery _
("ASSOCIATORS OF {Win32_LogicalFileSecuritySetting='" & FName & "'}" _
& " WHERE AssocClass=Win32_LogicalFileOwner ResultRole=Owner")
For Each objItem in colItems
FindOwner = objItem.AccountName
Next
End Function
Sub CreateExcelHeaders
'create headers for spreadsheet'
Set objRange = objExcel.Range("A1","G1")
objRange.Font.Bold = true
objExcel.Cells(1, 1).Value = "File Name"
objExcel.Cells(1, 2).Value = "File Type"
objExcel.Cells(1, 3).Value = "Size"
objExcel.Cells(1, 4).Value = "Owner"
objExcel.Cells(1, 5).Value = "Path"
objExcel.Cells(1, 6).Value = "Date Created"
objExcel.Cells(1, 7).Value = "Date Modified"
End Sub
Sub ExcelAutofit
'autofit cells'
Set objRange = objExcel.Range("A1")
objRange.Activate
Set objRange = objExcel.ActiveCell.EntireColumn
objRange.Autofit()
Set objRange = objExcel.Range("B1")
objRange.Activate
Set objRange = objExcel.ActiveCell.EntireColumn
objRange.Autofit()
Set objRange = objExcel.Range("C1")
objRange.Activate
Set objRange = objExcel.ActiveCell.EntireColumn
objRange.Autofit()
Set objRange = objExcel.Range("D1")
objRange.Activate
Set objRange = objExcel.ActiveCell.EntireColumn
objRange.Autofit()
Set objRange = objExcel.Range("E1")
objRange.Activate
Set objRange = objExcel.ActiveCell.EntireColumn
objRange.Autofit()
Set objRange = objExcel.Range("F1")
objRange.Activate
Set objRange = objExcel.ActiveCell.EntireColumn
objRange.Autofit()
Set objRange = objExcel.Range("G1")
objRange.Activate
Set objRange = objExcel.ActiveCell.EntireColumn
objRange.Autofit()
End Sub
David Hood

Accessing Excel through automation is bvery slow no matter what tool you use. Scanning a disk is very slow for all tools.
Since Vista all system have a search service that catalogues all major file itmes like size, extension, name and other attributes. A search of a 1+Tb volume can return in less that a second if you query the search service.
You can easily batch the result into Excel by writ4ing to a CSV and opening in Excel. Use a template to apply formats.
Example. See how fast this returns results.
#The following will find all log files in a system that are larger than 10Mb
$query="SELECT System.ItemName, system.ItemPathDisplay, System.ItemTypeText,System.Size,System.ItemType FROM SystemIndex where system.itemtype='.log' AND system.size > $(10Mb)"
$conn=New-Object -ComObject adodb.connection
$conn.open('Provider=Search.CollatorDSO;Extended Properties="Application=Windows";')
$rs=New-Object -ComObject adodb.recordset
$rs.open($query, $conn)
do{
$p=[ordered]@{
Name = $rs.Fields.Item('System.ItemName').Value
Type = $rs.Fields.Item('System.ITemType').Value
Size = $rs.Fields.Item('System.Size').Value
New-Object PsObject -Property $p
$rs.MoveNext()
}Until($rs.EOF)
¯\_(ツ)_/¯

Can we provide UN and pwd Authentication 4r SMTP Mail Configuration

Dear All,
Previously we are able to send the mails from SAP to Outside World. After chaning the Mail Server to MS Exchange 2003
We enabled the Port the 25.
We are facing a problem While configuring a mail via SMTP for Exchange Server 2003.
Throws an Error Message:
Internal error: CL_SMTP_RESPONSE ESMTP error code is not known. 554 554 > : Recipient add
As per network Team :
Unless we provide a Username and password, the Send/Receive process does not happen.
Is there any option in SAP - SMTP Mail Configuration to Provide user and password Authentication.
I searched in SDN as well as in market place. but i could not succeed. Please guide me the process.
Regards
SNB.

Hi we are configuring Google SMTP getting below error..
No delivery to xxx.com, authentication required
Message no. XS856
Diagnosis
The message was processed successfully in the SAP system. The mail server that is to receive the message for further processing requires authentication. Probably there is no logon data specified in the SAPconnect configuration.
Information from external system (if available)
smtp.gmail.com:587
530 5.7.0 Must issue a STARTTLS command first. i91sm11178241qgd.25 - gsmtp
Procedure
Enter the logon data in the SAPconnect node.
Using Gmail SMTP server using "smtp.gmail.com" with port 587
Please advise.
Regards,
Sudarshan

Failover cluster wmi provider detected an invalid character

We are getting this recurring error in our two node hyper-v cluster:
ID: 6237 Source: FailoverClustering-WMIProvider
Logs anywhere from 1- 15 of these errors every half hour. We are running on Server 2008 R2 SP1 with Hyper-V role and management done by VMM 2012. Hosts are identical hardware (Intel Board, dual quad-core Xeon, 48gb ram) and VMs running on EMC VNXe 3100 shared
storage via iSCSI.
Log Name:      Microsoft-Windows-FailoverClustering-WMIProvider/Admin
Source:        Microsoft-Windows-FailoverClustering-WMIProvider
Date:          5/6/2013 5:02:11 AM
Event ID:      6237
Task Category: Failover Cluster WMI Provider
Level:         Error
Keywords:
User:          COASCADA\msscvmm
Computer:      wwpsvrhypv02.coascada.local
Description:
Failover Cluster WMI Provider detected an invalid character. The private property name 'PreviousOfflineAction' had an invalid character but the provider failed to change it to a valid property name. Property names must start with A-Z or a-z, and valid characters
for WMI property names are A-Z, a-z, 0-9, and '_'.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
   <Provider Name="Microsoft-Windows-FailoverClustering-WMIProvider" Guid="{0461BE3C-BC15-4BAD-9A9E-51F3FADFEC75}" />
    <EventID>6237</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>1</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2013-05-06T12:02:11.390560300Z" />
    <EventRecordID>8301</EventRecordID>
    <Correlation />
    <Execution ProcessID="6900" ThreadID="5376" />
    <Channel>Microsoft-Windows-FailoverClustering-WMIProvider/Admin</Channel>
    <Computer>wwpsvrhypv02.coascada.local</Computer>
    <Security UserID="S-1-5-21-3378633525-1537071075-772992230-3177" />
</System>
<EventData>
    <Data Name="Parameter1">PreviousOfflineAction</Data>
</EventData>
</Event>

Hi,
You may try the hotfix in KB 974930:
An application or service that queries information about a failover cluster by using the WMI provider may experience low performance or a time-out exception
http://support.microsoft.com/kb/974930
Cause:
This problem occurs because the WMI provider responds to the query requests very slowly. The time that the WMI provider takes to complete the query requests affects the following performance measurements:
The ability and reliability of the service or application
The speed of generating a status report about the failover cluster
Therefore, a slow response of the WMI provider may cause the application or service to function abnormally.
For more information please refer to following MS articles:
Event ID 6237: Failover Cluster WMI Provider detected an invalid character
http://social.technet.microsoft.com/Forums/en-US/windowsserver2008r2highavailability/thread/bae84aea-5a80-4637-989b-c31bbc1aa55a/
Lawrence
TechNet Community Support

Provide ALE and IDOC Faqs and all Transactions

Dear Experts,
I am new to ALE & IDOC.
Please provide ALE & IDOCs FAQs and all Transactions?
Thanks in advance.

<b>FAQS</b>
A L E
Q: Our IDOC remains in status 51 ( not posted) while testing ALE setup by passing DEBMAS02 Idocs. The message 'Field KNA1-BRSCH is not an input field'. This is the Industry key. What are we missing?
A: Go to IMG - menu path IMG->LogisticsGeneral-> Logistics Basic Data: Business partners->Customers-> Control->Define Account groups and field selection for customer.
Select sold-to or ship-to. Select General Data. Select control and double click. Industry key is found here. Change the option to 'Optional Entry'.
Check OSS 5599. You may have to update view V_T078D also.
E D I / IDOC
Q:1 We created an EDI Vendor and created all required output conditions. However no IDOC is generated when PO is printed. Why?
A: Go to Header->output for the PO. The output type shall be '6'. The status shall be '1'. If the status is '0' check the timing. If the status is '2' , go to 'GOTO->Processing Log' and the explanation for non-generation of IDOC can be seen.
Q: How can we create / upload IDOC's from legacy system to SAP?
A: Third party tool Mercator may be used to convert Legacy files to Idoc format. Mercator provides an IDOC tree import facility, SAP provides the export facility. You can transfer the Idoc layouts from SAP to Mercator automatically and then map.
Q: We want to receive an outbound EDI 855 IDOC only if E2EDP20 -scheduling confirmation segment is present. Else get an "error" status preventing triggering the EDI subsystem.
A: User exit logic has to be added in function IDOC_INPUT_ORDRSP.
Set up a test flag and set it off when the IDOC header is read.
Turn the flag ON when the EDP20 segment is read.
Interrogate this flag when the next segment after EDP20 in the same IDOC comes in. If it is on ,you have an EDP20 coming in.
Issue an error status 51 with suitable message for whichever condition you don't want the IDOC to be processed, This will stop the IDOC from posting.
Q: Where ever PO is sent to the vendor via EDI, we want an acknowledgement of the PO by vendor. Which fields are updated and what should be my procedure?
A: Execute Program: IDOC_INPUT_ORDRSP
Process code: ORDR
Message type: ORDRSP
IDOC: ORDERS01
The confirmation process allows the supplier to return an acknowledgment. Only Dates and quantities can be changed The information is stored in the PO and can be viewed via Item->Confirmation->Overview. The PO can be flagged as 'confirmation required' so that Pos without acknowledgement receipt can be monitored. Control keys and tolerances (days and quantities) have to be customized.
Outbound:
Step 1. Application document is created when transaction is saved.
2. Message control is invoked.
3. Messages are processed by system.
4. Messages are Edited (if desired).
5. Output (ALE / EDI) is checked
6. Validate against Message control record from Partner Profile
7. Application Document is saved.
8. Entry NAST table is created for every selected output program
along with Medium & Timing.
9. Check for Process Immediately .
If (yes)
Determine Processing Program from TNAPR Table.
ELSE
Execute RSNASTED Program.
10. Read Partner Profile to determine Process Code.
11. Process Code points to the Function Module & Invoked.
12. IDoc is generated.
13. Check for ALE Request.
if (Yes)
Perform Filters, Conversions, Version Changes etc.
Else.
IDoc is stored in DATABASE.
INBOUND:
Step 1. EDI Subsystem creates an IDoc file from EDI Messages
2. Subsystem calls Functional Module EDI_DATA_INCOMING from startRFC program.
3. Data in Control Record is validate against the Partner Profile.
4. IDoc is generated in Database and syntax check is carried out.
5. IDoc file is deleted once file read.
6. Event PROCESSSTATE REACHED is triggered in Idoc Object Workflow.
7. Check for Process Immediately.
If NO
Execute RBDAPP01 Program
Else
Read Process Code from Partner Profile
Process Code Points to Function Module
Application Document Posted.
further help:
check url
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/ale/configuration.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapdevelopment.co.uk/training
And also u can get lots of inof from the below link.
http://www.sapgenie.com/ale/why_ale.htm
Just follow the procedure
Sending System(Outbound ALE Process)
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Create Model View
Tcode BD82 ? Generate partner Profiles & Create Ports
Tcode BD64 ? Distribute the Model view
Message Type MATMAS
Tcode BD10 ? Send Material Data
Tcode WE05 ? Idoc List for watching any Errors
Receiving System(Inbound ALE )
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 ? Idoc List for inbound status codes
ALE IDOC Steps
Sending System(Outbound ALE Process)
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Create Model View
Tcode BD82 !V Generate partner Profiles & Create Ports
Tcode BD64 !V Distribute the Model view
This is Receiving system Settings
Receiving System(Inbound ALE )
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 !V Idoc List for inbound status codes
Message Type MATMAS
Tcode BD10 !V Send Material Data
Tcode WE05 !V Idoc List for watching any Errors
STEP 1)a Goto Tcode SALE
Click on Sending & Receiving Systems-->Select Logical Systems
Here Define Logical Systems---> Click on Execute Button
go for new entries
-System Name : ERP000
-Description : Sending System
-System Name : ERP800
-Description : Receiving System
press Enter & Save
it will ask Request
if you want new request create new Request orpress continue for transfering the objects
B) goto Tcode SALE
Select Assign Client to Logical Systems-->Execute
000--> Double click on this
Give the following Information
-Client : ERP 000
-City :
-Logical System
-Currency
-Client role
Save this Data
Step 2) For RFC Creation
Goto Tcode SM59-->Select R/3 Connects
Click on Create Button
RFC Destination Name should be same as partner's logical system name and case sensitive
to create the ports automatically while generating the partner profiles
give the information for required fields
RFC Destination : ERP800
Connection type: 3
Description
Target Host : ERP000
System No:000
lan : EN
Client : 800
User : Login User Name
Password:
save this & Test it & RemortLogin
STEP 3) Goto Tcode BD64 -- click on Change mode button
click on create moduleview
short text : xxxxxxxxxxxxxx
Technical Neme : MODEL_ALV
save this & Press ok
select your just created modelview Name :'MODEL_ALV'.
goto add message type
Model Name : MODEL_ALV
sender : ERP000
Receiver : ERP800
Message type :MATMAS
save & Press Enter
STEP 4) Goto Tcode BD82
Give Model View : MODEL_ALV
Partner system : ERP800
execute this by press F8 Button
it will gives you sending system port No :A000000015(Like)
STEP 5) Goto Tcode BD64
select the modelview
goto >edit>modelview-->distribute
press ok & Press enter
STEP 6) goto Tcode : BD10 for Material sending
Material : mat_001
Message Type : MATMAS
Logical System : ERP800
and Execute
STEP 7)goto Tcode : BD11 for Material Receiving
Material : 100-300
Message Type : MATMAS
and Execute --> 1 request idoc created for message type Matmas
press enter
Here Master Idoc set for Messge type MATMAS-->press Enter
1 Communication Idoc generated for Message Type
this is your IDOC
Change Pointers
how to change the description of a material using ALE Change Pointers.
I will give the following few steps
1) Tcode BD61---> check the change pointers activated check box
save and goback.
2) Tcode BD50---> check the MATMAS check box save and comeback.
3) Tcode BD51---> goto IDOC_INPUT_MATMAS01 select the checkbox save and comeback.
4) Tcode BD52---> give message type : matmas press ok button.
select all what ever you want and delete remaining fields.
save & come back.
5) 5) go to Tcode MM02 select one material and try to change the description and save it
it will effects the target systems material desciption will also changes
6) goto Tcode SE38 give program Name is : RBDMIDOC and Execute
give Message type : MATMAS and Executte
ALE/IDOC Status Codes/Messages
01 Error --> Idoc Added
30 Error --> Idoc ready for dispatch(ALE Service)
then goto SE38 --> Execute the Program RBDMIDOC
29 Error --> ALE Service Layer
then goto SE38 --> Execute the Program RSEOUT00
03 Error --> Data Passed to Port ok
then goto SE38 --> Execute the Program RBDMOIND
12 Error --> Dispatch ok
Inbound Status Codes
50 Error --> It will go for ALE Service Layer
56 Error --> Idoc with Errors added
51 Error --> Application Document not posted
65 Error --> Error in ALE Service Layer
for 51 or 56 Errors do the following steps
goto WE19 > give the IDOC Number and Execute>
Press on Inbound function Module
for 65 Error --> goto SE38 --> Execute the Program RBDAPP01 then your getting 51 Error
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
<b>Reward Points if it helps,</b>
Satish

Hyper-V WMI Provider - Searching and Setting Port Mirroring

Similar Messages

Maybe you are looking for