Hyperian Interactive Web Client install error - Is it supported for Windows 7 ?

Hi
I have not been able to install 'Hyperian Interactive Web Client'. Please find attached the screenshots when I trigger the report from a web app.
Would appreciate a quick reply

yes, IR WebClient is supported on Windows 7. it just depends on the version of EPM and Browser.

Similar Messages

  • When i try to install itunes 10.6.3 for windows vista i get "error microsoft VC*80.CRT,type="win32",version="8.0.50727.6195".publicKey token="1fc8b3b9a1e18e3b",ProcessorArchitecture="x86"   what should i do?

    when i try to install itunes 10.6.3 for windows vista i get "error microsoft VC*80.CRT,type="win32",version="8.0.50727.6195".publicKey token="1fc8b3b9a1e18e3b",ProcessorArchitecture="x86"   what should i do?

    same problem. tried the ff fixes from microsoft but no joy
    http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/gett ing-error-message-an-error-occurred-during-the/10122022-2d88-4266-a695-6c6ddeafd 019?tab=AllReplies&page=1
    http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/ windows-vista-unable-to-install-itunes-an-error/19b48df7-54c8-47f3-8854-d34118fa a79a
    http://support.microsoft.com/mats/system_maintenance_for_windows/en-us
    other ideas would be appreciated.
    cheers

  • Issue while Installing Oracle Data Access Software for Windows

    All,
    Iam getting the following error while installing Oracle Data Access Software for windows. Iam installing in WindowsXP, with Oracle 9i release 9.2.0.7.0 DB and client in the same Box.
    It shows
    The Specified Key key was not found while trying to GetValue
    * Stop installation of all Products
    * Stop installtion of this componenent only.
    Kindly let me know why this error is showing up.
    Regards
    Ramesh

    Most probably you have hit this issue:
    "If you have more than one Oracle Home installed on the same machine (e.g. Oracle8i client and Oracle9i Release 2 client), use the Oracle Home Selector to run your applications with Oracle9i Release 2 client. "
    As documented on the Oracle Data Access Software for Windows. Release 9.2.0.4.0
    ~ Madrid.

  • Having issues installing iTunes 11.1.4 for Windows 7 (64 bit).

    Issues installing iTunes 11.1.4 for Windows 7 (64 bit).This install clobbered my previous version of iTunes. Error message is "service Apple Mobile Device failed to start". Cannot start the service manually even though I am the administrator of the machine. There is obviously some conflict that was recently introduced by a Windows update or in the Apple installation. I have tried removing iTunes and the AMDS (the Apple mobile device service) and reinstalling with the same error message.
    Thanks for any suggestions you can provide!
    Marilyn

    Hey there Marylin,
    It sounds like you are unable to start iTunes due to this error message even after uninstalling the iTunes application and the Apple Mobile device. I would recommend uninstalling not just those 2 applications but iTunes and ALL its associated applications with the following article:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/ht1923
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • When attempting install of iTunes 10.5 for Windows 7 on Parallels 7, I get a message saying,  "A program required to install cannot be run. Contact the package vendor or sys admin" (that's me).  I completely uninstalled the previous iTunes prior to this.

    When attempting install of iTunes 10.5 for Windows 7 on Parallels 7, I get a message saying,  "A program required to install cannot be run. Contact the package vendor or sys admin" (that's me).  I completely uninstalled the previous iTunes prior to this.  Any thoughts?

    Try the following user tip:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • How do i Install the Software Update Server for Windows 7?

    How do i Install the Software Update Server for Windows 7? I get an error saying: Can't Install the Software because it is not currently available from the Software Update server.
    I downloaded the software so How do I install it?
    Do I install it all over again or when I have windows open?
    I am using Bootcamp.

    Back up your system drive completely. If you have no backup plan in place, now would be a good time to start. You can use CarbonCopyCloner to make a complete, bootable backup of your system on another drive or volume. After you have done this: download the combo update using the link supplied by Niel and run the installer.

  • Unable to install Remote Server Administration Tools for Windows 8 Release Preview on RTM 8 Enterprise

    Unable to install Remote Server Administration Tools for Windows 8 Release Preview on RTM 8 Enterprise 
    Standalone installer available here
    http://www.microsoft.com/en-us/download/details.aspx?id=28972
    fails with error code 0x80004005
    Is this because my installation has issues, or would the admin pack files be updated for RTM?
    Thank you in advance for any insight

    Found the solution here:
    http://social.technet.microsoft.com/Forums/en-US/w8itprogeneral/thread/6d8745e0-c4c1-463a-b4bb-09f6c9c22527
    Workaround:
    Download the RSAT package intended for Windows 8 Release Preview: http://www.microsoft.com/en-us/download/details.aspx?id=28972
    Extract the .msu file with a tool such as 7-Zip.
    Open an Admin command prompt and change directory to where you extracted the .msu.
    Run the following command to install (if x86 you probably have a different .xml filename): pkgmgr /n:Windows6.2-KB2693643-x64.xml
    Wait a while. You can look in task manager for pkgmgr. When it disappears, the installation is done.
    Use the tools as per usual.

  • Intel Chipset Support for Windows 7 fails to install

    When I tried to manually install Intel Chipset Support for Windows 7, Vista and XP (oss907ww, Version: 9.1.1.1016, Release Date: 2009/10/02, http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-73684) on my W700 with Windows 7 x64, I got the following error message:
    "This computer does not meet the minimum requirements for installing the software. Setup will now exit."
    The newly released System Update 4.0 also fails to install this version of Intel Chipset Support. However, the previous version, Intel Chipset Support for Windows Vista, XP and 2000 (oss803ww, Version: 8.7.0.1007, Release Date: 2008/08/20, http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70315) installs and works fine on my current system. Has anyone else had this problem?

    Hi,
    I have a problem installing the above mentioned chipset driver for win7. TVSU can't install it, and when I do it manually, it gives me a message saying (translated - original message was annoyingly in chinese) "This system does not meet the lowest requirements of the software. The installation will end now."
    I tried downloading it from lenovo's website, but it didn't work either, giving me the same message. The version of this driver is 9.1.1.1016 (according to TVSU).
    Anyone have any ideas on what on earth is wrong?
    Thank you all!
    Cassio
    Moderator note; subject edited to match thread
    T400s - 2815RW1 + Win7 Ultimate
    Don't pm me for help! That's what the forum is for. Also, Google's nicer than me. Ask him.

  • Every time i try to install itunes on my laptop for windows  i get the message''key not valid for use in specified state''  any clue? '

    every time i try to install itunes on my laptop for windows  i get the message''key not valid for use in specified state''  any clue?

    For "Key not valid for use in specified state" errors try moving the folder RSA from C:\Users\<User>\AppData\Roaming\Microsoft\Crypto\RSA to say C:\<User>\RSA (just in case there should be a need to restore it) then try installing again. This folder appears to act as a cache and should be rebuilt automatically as required.
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard. But my Snow Leopard install disk is too old for Windows 7, so attempted Boot Camp install of drivers fails.

    I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard. But my Snow Leopard install disk is too old for Windows 7, so attempted Boot Camp install of drivers fails.
    I have hand-installed the NVidia graphics driver, and I have keyboard, minimal trackpad, and hardwire to internet all working. So the WIndows machine is usable. But I am hurting for wi-fi, better trackpad, and whatever else is delivered by Boot Camp. I can't use any of the Boot Camp upgrades because I do not have XP or Vista.

    While we all have MacBooks in this forum not all of us use Boot Camp. There's a Boot Camp Support Community where everybody uses Boot Camp. You should also post this question there.
    https://discussions.apple.com/community/windows_software/boot_camp

  • I tried to install iTunes 10.6.1 for Windows (64 bit) and it says "A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404). I have tried uninstalling everything and reinstalling and it still does not work.

    I tried to install iTunes 10.6.1 for Windows (64 bit) and it says "A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404). I have tried uninstalling everything and reinstalling and it still does not work. I then restored my computer to a week ago and tried to download and install the update and this came up again.

    Check out this thread:
    https://discussions.apple.com/thread/3677426?start=0&tstart=0

  • Problem with Office 2007 whenever I install the iCloud Control Panel for Windows

    Sadly I have a Win7 laptop as my work hack and am using Office 2007.  Outside of work I use iCloud to sync calenders between various iOS/OS X devices however whenever I install the iCloud Control Panel for Windows Plugin my email no longer loads. Outlook starts fine and just sits there with an empty inbox waiting for mail to load.  I can't even open the iCloud Panel from within Control Panel either to set preferences!
    Unistalling the iCloud plug-in resolves this but I really want to sync my iCloud calender with Outlook and can't see any other way to do it, plus it worked before and then just stopped.
    Any assistance would be appreciated.

    I tired everything that was suggested in the forum.  Tried IE and firefox to no avail. When I tried computers in stores both worked.  A friend of mine who has the 32 bit setup got it to work. Several folks have stated it is the compatability issue with 64 bit.  As a last resort, I loaded safari on my home computer, and yep, it works.  Go figure, apple product.

  • Installed 8.0.1.11 for windows and lost space to "other"

    I installed 8.0.1.11 for windows. iTunes then spent a few hours updating my library. When I synced (checked tunes, I don't do manual) my 80gb Classic (which was 100mb from full), about half of my music was removed and then it started to reload. Somewhere along the way my "other" went from being around 500mb to 13gb, and my music no longer all fits. I can't figure what the "other" is. My music/photo/etc capacity is down to around 61gb. I've downloaded and installed 8.0.2.20 but no change.
    Can I reload an earlier version? Has this happened to anyone else? I have no video, no podcast subs, just music and a few pics.

    In normal usage, "Other" can be Album Artwork, Notes, Contacts, Firmware etc. or (and this doesn't apply to the iPod Touch or iPhone which don't have the option to enabled for disk use), files that are on there if you are using the iPod as a removable storage device.
    If Other is being incorrectly reported then try restoring your iPod. Restoring will erase the iPod's hard drive, reload the software and put it back to default settings. Once the restore is complete follow the on screen instructions to name the iPod and automatically sync your songs and videos onto the fresh installation. Press Done and the iPod will appear in iTunes and start to sync. If you want to update manually or using selected playlists uncheck the box beside the sync automatically instruction and press Done, it will default to manual mode and you can choose whatever setting you like: Restoring iPod to factory settings with iTunes

  • How to fix error 3914 of itunes for windows...?

    How to fix error 3914 of itunes for windows...?

    Queries1 :- Where i need to type the above command to get the version of cygwin and make.From the command prompt -- Make sure that the Cygwin Bin directory is set in the Path (Refer to the same doc, 7. Add Cygwin Bin Directory to Path). You could also search for make.exe file to verify the directory where all those executable files are located.
    Thanks,
    Hussein

  • ORA-12541: TNS:no listener, (error, in oracle 11g for window 7, 64 bit)

    ORA-12541: TNS:no listener, error, in oracle 11g for window 7, 64 bit
    While connecting as localhost is pretty well.
    but command: sqlplus username@'192.168.52.178:1521/orcl' on the same machine is producing above mentioned error on oracle 11g for window 7, 64 bit.

    user11225434 wrote:
    Thax sir for your kind concern of my problem. Answers of your quaries regarding my question as follows
    lsnrctl status
    LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 05-AUG-2013 09:37
    :21
    Copyright (c) 1991, 2010, Oracle.  All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
    STATUS of the LISTENER
    Alias                     LISTENER
    Version                   TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
    ction
    Start Date                05-AUG-2013 09:31:09
    Uptime                    0 days 0 hr. 6 min. 22 sec
    Trace Level               off
    Security                  ON: Local OS Authentication
    SNMP                      OFF
    Listener Parameter File   C:\app\eee\product\11.2.0\dbhome_5\network\admin\liste
    ner.ora
    Listener Log File         c:\app\eee\diag\tnslsnr\eee-THINK\listener\alert\log.x
    ml
    Listening Endpoints Summary...
      (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.52.170)(PORT=1521)))
    Services Summary...
    Service "CLRExtProc" has 1 instance(s).
      Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Service "orclxe" has 1 instance(s).
      Instance "orclxe", status READY, has 1 handler(s) for this service...
    Service "orclxeXDB" has 1 instance(s).
      Instance "orclxe", status READY, has 1 handler(s) for this service...
    The command completed successfully
    # listener.ora Network Configuration File: C:\app\eee\product\11.2.0\dbhome_5\network\admin\listener.ora
    # Generated by Oracle configuration tools.
    SID_LIST_LISTENER =
      (SID_LIST =
        (SID_DESC =
          (SID_NAME = CLRExtProc)
          (ORACLE_HOME = C:\app\eee\product\11.2.0\dbhome_5)
          (PROGRAM = extproc)
          (ENVS = "EXTPROC_DLLS=ONLY:C:\app\eee\product\11.2.0\dbhome_5\bin\oraclr11.dll")
    LISTENER =
      (DESCRIPTION_LIST =
        (DESCRIPTION =
          (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
          (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.52.170)(PORT = 1521))
    ADR_BASE_LISTENER = C:\app\eee
    3. My ip is static 192.168.52.170 and window 7 prof. is there.
    4. Sir i have tested the remote connection with firewall configuration is off.
    Hopefully this info is useful.
    but command: sqlplus username@'192.168.52.178:1521/orcl'
    NOTE the difference in IP#s above; 192.168.52.170 vs. 192.168.52.178

Maybe you are looking for