Hyperion 11.1.2 - Ruleset name with '&' has issue

Hi
We are migrating from Hyperion 9.3.1 to 11.1.2...
We migrated a Sequence from 9.3.1 to calc manager Ruleset in 11.1.2.
I have a Ruleset name "Profit&Loss"
When I open the webfrom using planning URL , when I launch this ruleset, i get the below error.
An error occurred while processing this page. Check the log for
details.
Log file says unable to find the Ruleset "Profit", insted of "Profit&Loss".
The same thing works fine through Workspace URL.
Please let me know, if any one had the same issue.
Thanks
TSREDDY

Yes Sree. We did had those kind of issues where "&" and "/" caused issues. We had to disable the ADF for that. However, our issue was with Planning members and forms
I don't remember correctly if that was fixed and a patch was issued but that was in 11.1.2.2
After that experience, we have decided not to use special characters in Rule Name, Form Name, Member Name
Regards
Amarnath
ORACLE | Essbase

Similar Messages

N97 NAM with crash issues... Anyone else?

My N97 arrived today and aside being fairly impressive (and having a manual marked as a draft copy for some reason), it's been... A pretty unstable experience. I'm having sporadic but fairly frequent crashes, most of the time either fading to black and rebooting, or having some sort of freeze so severe it causes the image on the LCD to just fade away before going dark and hanging there until the power button is held to force it off. I've done a format through the home screen, in case some of my older apps were giving v5 headaches. Doesn't seemed to have helped just yet. Anyone have an idea if this is hardware or a bug in the initial firmware?

http://share.ovi.com/media/broadwing.public/broadwing.10002
This is the fairly visually impressive crash I've been seeing with GPS apps. Using Ovi Maps 3 here, but that's just what I was using here... Can even happen in the camera app with GPS on. Note that the error occurred before I loaded Maps 3, so that's not a cause.
Apologies for the quality of course, I'm more a stills sort of guy.
Message Edited by broadwing on 12-Jun-2009 10:53 PM

Need a report on credit release with user name whos has released

Hi All,
Need a report with following details:
1.2. Sales order punched by-user name who has created.
2. User name who has released sales order from credit block.
3. release Date and time of order released.
Please suggest. As I could not find any standard report.
what tables should I join to get the report.
Thanks in advance
Regards,
Mskgnt

hI
>
> Need a report with following details:
>
> 1.2. Sales order punched by-user name who has created.
You can get the user name from table VBAK-ERNAM Pass the sales order number in to VBAK-VBELN
> 2. User name who has released sales order from credit block.
> 3. release Date and time of order released.
From the report RSSCD100 enter the object class as VERKBELEG and T code as VKM3 and execute
Or You can use the table CDHDR
User Name CDHDR-username and for release date and time
CDHDR-UDATE
CDHDR-UTIME
REGARDS
PrashanthI
Edited by: Prashanth@SD on Nov 9, 2010 8:03 AM

Odd: Sidebar has my "computer Name with a (3) after it.

Hi,
Could someone tell me why in the finder window sidebar that it shows my computer name with a (3) after it?
"Computername"(3)
It has been running a little wacky in the last few months.iMac20" iMac 2.1
Thanks for your input.

I think this occurs when your network connection fails or changes, and then on re-establishing, the old name lingers on the Mac without being flushed, held in a cache perhaps and so it mistakenly thinks it is another of the same name.
That yours has a three after it, tends to support this view that the same name has been reconnected for a third time. I don't understand much more than that.
As JollyGiant says, just edit it back to how it should be.
Spelling was edited by: roam

CS6 Beta Bridge bug importing CS5 workspace names with apostrophes (Win 7, 64x)

When I installed the CS6 Beta and opened Bridge [using File > Browse in Bridge...] I noticed that my CS5 workspace name of "Mark's" was showing as "MARK&APOS;S". I tried creating a new workspace in CS6 Bridge with the name of "Marc's". No problem with the newly-created name. So, the problem must be just when importing workspace names with aprostrophes from previous Ps versions.
Side note: this CS6 Beta working great so far! Thanks to everyone.
Adobe Photoshop Version: 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 3073 MHz
Built-in memory: 12279 MB
Free memory: 9679 MB
Memory available to Photoshop: 11008 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: ATI Technologies Inc.
Video Card Renderer: ATI Radeon HD 5700 Series
Display: 2
Display Bounds:= top: 0, left: 0, bottom: 1080, right: 1920
Display: 1
Display Bounds:= top: 0, left: 1920, bottom: 1080, right: 3840
Video Card Number: 2
Video Card: ATI Radeon HD 5700 Series
OpenCL Unavailable
Driver Version: 8.850.0.0
Driver Date: 20110419000000.000000-000
Video Card Driver: aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atiumd64.dll,atidxx64.d ll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
Video Mode: 1920 x 1080 x 4294967296 colors
Video Card Caption: ATI Radeon HD 5700 Series
Video Card Memory: 1024 MB
Video Rect Texture Size: 16384
Video Card Number: 1
Video Card: ATI Radeon HD 5700 Series
OpenCL Unavailable
Driver Version: 8.850.0.0
Driver Date: 20110419000000.000000-000
Video Card Driver: aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atiumd64.dll,atidxx64.d ll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
Video Mode: 1920 x 1080 x 4294967296 colors
Video Card Caption: ATI Radeon HD 5700 Series
Video Card Memory: 1024 MB
Video Rect Texture Size: 16384
Serial number: Tryout Version
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\Mark\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 891.0G, 770.0G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
   A3DLIBS.dll   A3DLIB Dynamic Link Library   9.2.0.112
   ACE.dll   ACE 2012/01/18-15:07:40   66.492997   66.492997
   adbeape.dll   Adobe APE 2012/01/25-10:04:55   66.1025012   66.1025012
   AdobeLinguistic.dll   Adobe Linguisitc Library   6.0.0
   AdobeOwl.dll   Adobe Owl 2012/02/09-16:00:02   4.0.93   66.496052
   AdobePDFL.dll   PDFL 2011/12/12-16:12:37   66.419471   66.419471
   AdobePIP.dll   Adobe Product Improvement Program   6.0.0.1642
   AdobeXMP.dll   Adobe XMP Core 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPFiles.dll   Adobe XMP Files 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPScript.dll   Adobe XMP Script 2012/02/06-14:56:27   66.145661   66.145661
   adobe_caps.dll   Adobe CAPS   5,0,10,0
   AGM.dll   AGM 2012/01/18-15:07:40   66.492997   66.492997
   ahclient.dll    AdobeHelp Dynamic Link Library   1,7,0,56
   aif_core.dll   AIF   3.0   62.490293
   aif_ocl.dll   AIF   3.0   62.490293
   aif_ogl.dll   AIF   3.0   62.490293
   amtlib.dll   AMTLib (64 Bit)   6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00)   1.000000
   ARE.dll   ARE 2012/01/18-15:07:40   66.492997   66.492997
   AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
   AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
   Bib.dll   BIB 2012/01/18-15:07:40   66.492997   66.492997
   BIBUtils.dll   BIBUtils 2012/01/18-15:07:40   66.492997   66.492997
   boost_date_time.dll   DVA Product   6.0.0
   boost_signals.dll   DVA Product   6.0.0
   boost_system.dll   DVA Product   6.0.0
   boost_threads.dll   DVA Product   6.0.0
   cg.dll   NVIDIA Cg Runtime   3.0.00007
   cgGL.dll   NVIDIA Cg Runtime   3.0.00007
   CIT.dll   Adobe CIT   2.0.5.19287   2.0.5.19287
   CoolType.dll   CoolType 2012/01/18-15:07:40   66.492997   66.492997
   data_flow.dll   AIF   3.0   62.490293
   dvaaudiodevice.dll   DVA Product   6.0.0
   dvacore.dll   DVA Product   6.0.0
   dvamarshal.dll   DVA Product   6.0.0
   dvamediatypes.dll   DVA Product   6.0.0
   dvaplayer.dll   DVA Product   6.0.0
   dvatransport.dll   DVA Product   6.0.0
   dvaunittesting.dll   DVA Product   6.0.0
   dynamiclink.dll   DVA Product   6.0.0
   ExtendScript.dll   ExtendScript 2011/12/14-15:08:46   66.490082   66.490082
   FileInfo.dll   Adobe XMP FileInfo 2012/01/17-15:11:19   66.145433   66.145433
   filter_graph.dll   AIF   3.0   62.490293
   hydra_filters.dll   AIF   3.0   62.490293
   icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   image_compiler.dll   AIF   3.0   62.490293
   image_flow.dll   AIF   3.0   62.490293
   image_runtime.dll   AIF   3.0   62.490293
   JP2KLib.dll   JP2KLib 2011/12/12-16:12:37   66.236923   66.236923
   libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)
   libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0
   LogSession.dll   LogSession   2.1.2.1640
   mediacoreif.dll   DVA Product   6.0.0
   MPS.dll   MPS 2012/02/03-10:33:13   66.495174   66.495174
   msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   pdfsettings.dll   Adobe PDFSettings   1.04
   Photoshop.dll   Adobe Photoshop CS6   CS6
   Plugin.dll   Adobe Photoshop CS6   CS6
   PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (64 bit)   3.0.0.383
   PSArt.dll   Adobe Photoshop CS6   CS6
   PSViews.dll   Adobe Photoshop CS6   CS6
   SCCore.dll   ScCore 2011/12/14-15:08:46   66.490082   66.490082
   ScriptUIFlex.dll   ScriptUIFlex 2011/12/14-15:08:46   66.490082   66.490082
   tbb.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   TfFontMgr.dll   FontMgr   9.3.0.113
   TfKernel.dll   Kernel   9.3.0.113
   TFKGEOM.dll   Kernel Geom   9.3.0.113
   TFUGEOM.dll   Adobe, UGeom©   9.3.0.113
   updaternotifications.dll   Adobe Updater Notifications Library   6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   6.0.0.24
   WRServices.dll   WRServices Friday January 27 2012 13:22:12   Build 0.17112   0.17112
   wu3d.dll   U3D Writer   9.3.0.113
Required plug-ins:
   3D Studio 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Accented Edges 13.0
   Adaptive Wide Angle 13.0
   ADM 3.11x01
   Angled Strokes 13.0
   Average 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Bas Relief 13.0
   BMP 13.0
   Camera Raw 7.0
   Chalk & Charcoal 13.0
   Charcoal 13.0
   Chrome 13.0
   Cineon 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Clouds 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Collada 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Color Halftone 13.0
   Colored Pencil 13.0
   CompuServe GIF 13.0
   Conté Crayon 13.0
   Craquelure 13.0
   Crop and Straighten Photos 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Crop and Straighten Photos Filter 13.0
   Crosshatch 13.0
   Crystallize 13.0
   Cutout 13.0
   Dark Strokes 13.0
   De-Interlace 13.0
   Dicom 13.0
   Difference Clouds 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Diffuse Glow 13.0
   Displace 13.0
   Dry Brush 13.0
   Eazel Acquire 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Embed Watermark 4.0
   Entropy 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Extrude 13.0
   FastCore Routines 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Fibers 13.0
   Film Grain 13.0
   Filter Gallery 13.0
   Flash 3D 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Fresco 13.0
   Glass 13.0
   Glowing Edges 13.0
   Google Earth 4 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Grain 13.0
   Graphic Pen 13.0
   Halftone Pattern 13.0
   HDRMergeUI 13.0
   IFF Format 13.0
   Ink Outlines 13.0
   JPEG 2000 13.0
   Kurtosis 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Lens Blur 13.0
   Lens Correction 13.0
   Lens Flare 13.0
   Liquify 13.0
   Matlab Operation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Maximum 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Mean 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Measurement Core 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Median 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Mezzotint 13.0
   Minimum 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   MMXCore Routines 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Mosaic Tiles 13.0
   Multiprocessor Support 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Neon Glow 13.0
   Note Paper 13.0
   NTSC Colors 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Ocean Ripple 13.0
   Oil Paint 13.0
   OpenEXR 13.0
   Paint Daubs 13.0
   Palette Knife 13.0
   Patchwork 13.0
   Paths to Illustrator 13.0
   PCX 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Photocopy 13.0
   Photoshop 3D Engine 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Picture Package Filter 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Pinch 13.0
   Pixar 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Plaster 13.0
   Plastic Wrap 13.0
   PNG 13.0
   Pointillize 13.0
   Polar Coordinates 13.0
   Portable Bit Map 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Poster Edges 13.0
   Radial Blur 13.0
   Radiance 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Range 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Read Watermark 4.0
   Reticulation 13.0
   Ripple 13.0
   Rough Pastels 13.0
   Save for Web 13.0
   ScriptingSupport 13.0
   Shear 13.0
   Skewness 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Smart Blur 13.0
   Smudge Stick 13.0
   Solarize 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Spatter 13.0
   Spherize 13.0
   Sponge 13.0
   Sprayed Strokes 13.0
   Stained Glass 13.0
   Stamp 13.0
   Standard Deviation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Sumi-e 13.0
   Summation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Targa 13.0
   Texturizer 13.0
   Tiles 13.0
   Torn Edges 13.0
   Twirl 13.0
   U3D 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Underpainting 13.0
   Vanishing Point 13.0
   Variance 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Variations 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Water Paper 13.0
   Watercolor 13.0
   Wave 13.0
   Wavefront|OBJ 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   WIA Support 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Wind 13.0
   Wireless Bitmap 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   ZigZag 13.0
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
   Mini Bridge
   Kuler
Installed TWAIN devices: NONE

Thanks for the system info and the summary of the file issue. I'll check to see what's up with the apostrophes in the workspace names and forward to the Bridge folks, too.
Thanks,
Pattie

Problem with iWeb after associating a personal domain name with my MobileMe

I think I did this by the book. I associated my personal domain name with my MobileMe account, then changed the CName pointer at GoDaddy to MobileMe (MM), then went back to MM and hit 'Done'. iWeb now lists my MM account as 'My account name (personal domain name). It took a little while for the DNS pointer to propogate, but now I can go to a browser, type in my personal domain name, and MM delivers my iWeb website as I wanted it to, apparently from my domain, not web.me.com. The problem is, as soon as the DNS propogated, MM delivers my MM site OK, but iWeb can't find the files for it anymore. All my pages immediately went red (unpublished) when I tried to update the site, and any attempt to Publish gives me this error "iWeb couldn’t connect to MobileMe. Make sure your Internet connection works and try again." I'm cable connected to an ADSL router, and Airport connected to a cable router, and neither service has dropped out. I've rebooted, and retried, and the website is up under my own domain, so GoDaddy and MM both got it right. What did I do wrong? Thanks, someone... anyone?

This is now sort of resolved, but not very satisfactorily. One of the trainers at my local Appple Store found an old support issue in the archives going back to 2008, which blamed security settings for update problems. Coincidental with associating MobileMe with my personal domain, I had checked the privacy box and added an ID and PW to the site. That was the problem, not the personal domain, that was preventing iWeb from finding my MM account. Uncheck that box and my site happily updates. Of course, now I have a site that I cannot make private. In this case, not a show-stopper, but disappointing. I have reported it as a bug in the latest version of iWeb. Thanks for your help.

I have a domain name with go-daddy can i use iweb to create my page?

I'm trying to help a friend set-up a website. he has a domain name with go-daddy but hasnt set-up the web page at all can i use iweb and upload it to the domain name he already has bought? I'm a first time iweb user please help!!

Your friend needs both a domain name and a web hosting account in order to get his website online. If he has both with GoDaddy.com then yes, you can create and upload the site.
If he has purchased only a domain name he'll need to get a hosting service.
OT

Encoding failed in "file name" with error: -43

Hi!
I've tried everything but still, after about 20 hours of encoding DVD Studio Pro just stoppes, saying "encoding failed in "file name" with error: -43". The movie is in DV PAL format and made in Final Cut Pro version 5. I'm using DVD Studio Pro 4.0. The movie is about 1 hour and 30 minutes long and I'm trying to put it on a double layer DVD. I've tried to shorten it (it was nearly 2 hours before), but that didn't help. I also tried to shorten it even more and put it on a single layer DVD, but still the same message.
So if somebody has any idea of how I can solve this problem, please let me know as soon as possible!
Thank you!

Error -43 means "File not found." If you are compressing from a reference movie, make sure that all referenced movie clips are present on the disk and that permission settings are not preventing DVD Studio Pro from accessing them.
Error -1309 means "Out of bounds." This means that the source file is pretending to be bigger than it actually is.
So it sounds like there are issues with your source movie.
P.S. Compressor has a much better MPEG-2 encoder and I would recommend using that instead.

Two Technical Names with same Description in BW

Hi Experts,
Currently I am facing Problem in SAP BPC NW 7.5 one of Applications ( Profit And Loss Appl)
At Backend ( BW) I could observe that for P&L application 2 diff technical names with same description "PROFIT AND LOSS". We were not sure who created the other one. Prior to that there was no problem while fetching the data.
Before creation of 2nd Info Cube in BW, I was able to retrieve the values ( Transfer values from Fixed Cost & Revenue Forecast). However, after cretion of 2nd cube unable to see my data in PL reports.
Before deleting 2nd Cube in BW, I could see the data in backend in old Cube, but unable to retrieve data in BPC excel report.
Once I deleted the new PL infocube in BW where there was no data in that cube, still I was not able to retrieve the data in my old cube.
Request you to help me....
Thanks & Regards,
Hari

Hi Sanjeev,
If Appset transport happend twice, all applications should have come in BW. But in this case only PROFIT AND LOSS has got 2 diff tech names.
Hi Nilanjan.
Yes, both the cubes in Infoarea ( QA system) and we have not faced earlier this problem either in any other environments ( DEV or PROD).
Will DEV system appset transport will help to resolve this issue in QA since DEV & QA has same structure?
Regards,
Hari

I want to add image name with the extension to db after upload, Can any body help?

Hello there,
Earlier in the week I created PHP photo/image upload form so clients will be able to upload to my site, it worked very well uploading image to designated directory to the C:/path/ but there is more that I would like to do with the form, and that is to write the image name with the extension, “Joplateau.jpg” for example in the database after upload. I wanted to use hiddenField but it's not working for me, may be i am not doing it right. If any one has an idea how to do this please let me know, and thanks in advance.
Thanks in a lot.
Joplateau.

Server-side coding questions are best answered in the Application Developers forum:
http://forums.adobe.com/community/dreamweaver/dreamweaver_development?view=discussions
Nancy O.

I want to add image name with the extension to db after upload in PHP, Can any body help?

Hello People!
Earlier in the week I created PHP photo/image upload form so clients will be able to upload to my site, it worked very well uploading image to designated directory to the C:/path/ but there is more that I would like to do with the form, and that is to write the image name with the extension, “Joplateau.jpg” for example in the database after upload. I wanted to use hiddenField but it's not working for me, may be i am not doing it right. If any one has an idea how to do this please let me know, and thanks in advance.
Thanks a lot.
Joplateau

Server-side coding questions are best answered in the Application Developers forum:
http://forums.adobe.com/community/dreamweaver/dreamweaver_development?view=discussions
Nancy O.

Customer names with cyrylic characters are wrongly shown in Bex Analyser

Customer names with Cyrillic characters are wrongly shown in Bex Analyser. The master data is correctly maintained and extracted\loaded by BW for these customer (Master Data object is correct). This might be a Bex Designer issue.
Furthermore, it has nothing to do with the local settings, when copying the name of the customer to Bey Analyzer the name is correctly shown.

Hi,
We are facing the same problem with the turkish characters, Our system is BW 3.10 (3.30 Cont) and ECC 6.0. The turkish characters are displaying correctly at the table level, but not at the RSRT or the Bex level.
The turkish characters are displaying correctly at the table, RSRT and Bex level if we load the same record from the Non-unicode Prod system to the Non-unicode BW Dev system, but if we load from the unicode QA system the same record is not displaying correctly.
Has anybody got a solution for this issue
thanks
Kalyan

WiFi Network Name with Underscore Special Characters Issue

Turns out that iPod Touch doesn't like wireless network names with special characters (e.g. underscores) in them (I had 2 underscores in mine).
It will establish a connection, get an IP address, even use WEP but won't talk to the Internet if the wireless access point name has an underscore in it. If you can change your wireless network name to remove the special characters the iPod Touch becomes very and will connect using the Internet.

I'm looking for a way to escape all characters (not only the minus sign) except for a specific character. Kind of like 'unescaping' a specific character (the '%' sign) within braces {}What about if you apply a function like regexp_replace to escape all known "specific characters", and then unescape the particular specific character again back as e.g. in
SQL> select 'a.da-df%df*' str, replace (
                                               regexp_replace (
                                                    'a.da-df%df*',
                                                    '([[:punct:]])',
                                                    '\\\1'
                                               str2
from dual
STR         STR2
a.da-df%df* a\.da\-df%df\*
1 row selected.i.e. don't escape with curly brackets but with the backslash character.
You can then use this string in your query like in
WHERE CONTAINS(r.POI_NAME, '<query> <textquery grammar="context"> <progression><seq>'
||'aaab'
||'</seq><seq>'
||'aaa\-b'
||'%</seq></progression> </textquery> </query> ' ,1)> 2

Problems with replace file name with starting and ending Bates number

When applying Bates numbers to a set of Acrobat pdf files I am unable to replace file names with the starting and ending Bates number. This is important
for me in a legal application.
The Bates numbers are applied to each page of each of file without any problem as required.
The Bates log file indicates that the files have been renamed as I wanted.
I am running Adobe Acrobat Professional 9 with the update to 9.1.9 and Windows XP Service Pack 3 (the last or current service pack)
In all other respects Adobe Acrobat 9 is running to my satisfaction.
Has anyone else had this problem and found a solution?
HRKExon

Thanks for asking the question, I hadn't heard of Bates numbers before and this gave me a chance to look up something new.
When I googled for ' bates number legal index ' I found this document:
http://www.adobe.com/devnet/acrobat/pdfs/batesnumbering9.pdf
Maybe that will help.
Scott Bonacker CPA
Springfield, MO

SQL Query not working for column names with spaces

Hi People..
We have a strange situation wherein, the column name in the database table has a space inbetween like "Constant Name". While we write a JDBC statement code with the select query we get an exception for invalid syntax. It will help us in a great way if you have anything to inform us on this..
Thanks
Prabz

Using case sensitive names and names with spaces in it is not a good practice.
However, I believe the SQL standard accounts for this with quoted identifiers. I believe the syntax is
. select "My Field1", "My Field2"
. from "My Table'
Have also seen the following although it might be MS Access specific.
. select [My Field1], [My Field2]
. from [My Table]

Hyperion 11.1.2 - Ruleset name with '&' has issue

Similar Messages

Maybe you are looking for